Reddit mentions of Meguiar's X2000 Water Magnet Microfiber Drying Towel, 1 Pack

1. What I advise you to do the following:
   
   1. Get PPF (Paint Protection Film) full front (if you can afford it)
      
   2. After the PPF, get a ceramic coating done. there’s a lot of debate of it’s actually needed or effective but I’ve seen many many cases where either side can be “correct” in the sense you can’t go wrong diy vs. getting it done professionally. There are plenty of people here who have done it themselves but please refer to r/Autodetailing if you’re interested. I choose to get mine done professionally and I don’t regret it one bit. Helps to maintain the car very easy. Here’s a pic after getting ppf and coating done: https://i.imgur.com/v3Lpn9g.jpg
      
2. I use two bucket method (LOT of tutorials on google and youtube) Here’s a list of every single thing related I purchased for doing my own car wash:
   
   1. ONR Solution
      
   2. Chemical Guys MIC_507_06 Professional Grade Premium Microfiber Towel, Gold (16 in. x 24 in.) (Pack of 6)
      
   3. 2 of Meguiar’s X2000 Water Magnet Microfiber Drying Towel, 1 Pack
      
   4. Relentless Drive Ultimate Car Wash Mitt - 2 Pack Extra Large Size - Premium Chenille Microfiber Wash Mitt - Wash Glove - Lint Free - Scratch Free
      
   5. Chemical Guys MIC_7071 Glass and Window Waffle Weave Towel, Red (24 in. x 16 in.)
      
   6. Grit Guard (2x)
      
   7. Solo 418 One-Hand Pressure Sprayer, 1-Liter, Ergonomic Grip for Gardening, Fertilizing, Cleaning & General Use Spraying
      
   8. Windshield Window Cleaner Tool, Unbreakable Extendable Long-Reach Handle, Unique Pivoting Triangular Head, 3 Washable Reusable Microfiber Bonnets, Car & Home Inside Interior Exterior Use - Lint Free
      
   9. Buy 2 5 gallons buckets at Home Depot/Lowe’s
      
3. Tesla should do it for free but some people do end up paying $25-60 but usually free. Hope this helps!

The potential hazards are that if you accidentally missed a spot while washing, you have a very high chance of dragging dirt across your paint. Best case scenario you get a light swirl mark or streak. Worst case scenario you grind away much deeper into your clear coat causing damage, thus requiring paint correction using compounding and polishing.

It's just best to avoid it and use a better option such as a quality micro fiber cloth designed for the purposes of drying paint.

EDIT: /u/theragcompany these guys are pretty awesome. I'd recommend a waffle weave towel like this http://www.theragcompany.com/products/premium-microfiber-16-x-24-waffle-weave-towel.html but other manufacturers make them as well. https://www.amazon.com/Meguiars-X2000-Magnet-Microfiber-Drying/dp/B0009IQZFM/

I apologize in advance for this long post. None of these are "must gets", but they are what I got for my 2016 Premium forester. I'm posting this for my own future reference as well as to help some people who are wondering what accessories might be good for their new forester. I highly recommend ordering from Jackie from Annapolis Subaru @ 443-837-1422 as she can get you some good prices on the subaru accessories as well as WeatherTech products! I saved on WeatherTech shipping costs (~$20) by ordering through Jackie and the warranty is the same as if I had bought them through their website.

Please note that some of these accessory links are for my specific car year, model and configuration. I have a 2016 Premium forester without eyesight (affects the Covercraft/heatshield sunshade - they also have eyesight compatible sunshades!).

Also, I personally didn't get my windows tinted, but I think that is something that you should seriously consider doing :)

Speaker kit

Tweeter kit


WeatherTech DigitalFit floorliner (1st & 2nd row)


WeatherTech cargo/trunk liner (without bumper protector)

Weather Tech TechCare floorliner and floormat Cleaner/Protector Kit

Gorilla mud flaps

Covercraft's UVS100 sunscreen - use promo code FREESHIP

Exterior Auto Dimming Mirror w/ Approach Lighting

Luggage Compartment Cover (manual rear gate)

Rear bumper cover

Auto-Dimming Mirror with Compass and HomeLink

Rear Seat Back Protector

Two Home Depot 5 gallon homer bucket

Heatshield sunshade (driver/passenger, second row, rear windshield, sunroof) - note that their website only shows only one side window (driver/passenger), you need to call in to ask them to add the second row side window ones - on my invoice it says part #1425S-A and #1425S-B

Antigravity Batteries AG-XP-10 Multi-Function Power Supply and Jump Starter (check eBay to see if priced cheaper)

Viair 77P Portable Compressor Kit (check eBay to see if priced cheaper)

Amazon stuff:

EZ Pass Holder for VA Flex

Aux cable

Stickershield (parking stickers, etc)

Dropstop seat gap filler (driver/passenger side)

Door panel removal kit (for speaker kit install)

Two grit guards

Microfiber Drying towel

Microfiber cloths (3 pack)

Car wash shampoo

Wheel brush

Resqme (window breaker/seatbelt cutter)

Wheel cleaner

Microfiber wash mitt

Reindeer costume for Christmas

Headrest coat hanger

Road reflective triangles

Duct tape

Odor eliminator

Tire air pressure gauge

OBDII Scanner (Bluetooth)

First aid kit

I was considering these also. How is yours better?

http://www.amazon.com/gp/aw/d/B001TZBB3K/ref=mp_s_a_1_1?qid=1414699682&sr=8-1&pi=SY200_QL40

http://www.amazon.com/gp/aw/d/B0057O0GSA/ref=mp_s_a_1_4?qid=1414699720&sr=8-4&pi=AC_SX110_SY165_QL70

http://www.amazon.com/gp/aw/d/B0009IQZFM/ref=mp_s_a_1_1?qid=1414700082&sr=8-1&pi=SY200_QL40

Awesome! You definitely helped. One final question if it's ok. Will the following steps (in order) be good for a first time wash/detail?

1. Wash the car with this soap.
   
   
2. Scrub with these
   
   
3. Dry off with this
   
   
4. Decontaminate with [this]
   (https://www.amazon.com/gp/product/B00CUAWJ6G/ref=ox_sc_act_title_6?ie=UTF8&psc=1&smid=ATVPDKIKX0DER), while using this as the lube for it?

I have posted this setup else where and I think it's a better deal with the same results.Soap Foam Gun Wash Mitt Drying for about $60. It's what I started out with and I still use gold class every now and again and the foam gun for my Motorcycles.

Well I've just started getting together my own kit and felt I HAD to get these:

1. Meguiar's Clay bars and quik detail spray
   
   
2. Butt-load of microfiber towels
   
   
3. Waffle-weave drying towel
   
   
4. Grit-guards
   
   
5. Iron X wheel cleaner
   
   
6. Industrial Spray bottles
   
   
7. Meguiar's Gold Class car wash soap
   
   
8. Meguiar's Gold Class Wax
   
   
9. Purple Power
   
   
10. Proper wash mitt
    
    I still feel like there are atleast ten other products that I NEED!
    
    -Pressure Washer
    
    -Foam Cannon
    
    -Detailing brushes
    
    -Sealants/Compounds combined with a proper rotor drill
    
    -ETC
    
    

I picked up 2 packs of these and I've been used them for drying my car after GD method car-wash. How are they compared to the "Korean waffle weave towels"? Are they the same?

First of all, here's a link with some pictures: https://imgur.com/a/DdDMX8f

I just bought this car two weekends ago and I'm stoked. I have washed it once (normal two-bucket method, no polish/wax). I'm going to plan for a more in-depth detail this coming or the following weekend, so I'm planning on making some purchases and wanted to run them by you guys! My general plan is do a foam cannon spray, rest a little bit, rinse, decontaminate w/ Griot's Speed Shine and Griot's Synthetic Clay.

After decontamination, in the long run, I would like to put a coat of CQuartz. Beforehand, obviously, I need to remove as many of the swirls/scratches as possible. I don't have any experience yet with compounding/polishing so do you think I should try it first before buying the CQuartz, or should I just go for it?

Here's what I'd like to buy:

1. Soap - Currently I have a bottle of some basic Meguiars cheap stuff that I was using on my previous old cars. After reading around some, I was going to either go with Gold Class or Optimum Car Wash. CarPro Reset is another option for me as I would like to apply CQuartz eventually so I want something without additives and waxes. Currently I have Optimum Car Wash in my cart, any reason I should go with anything else? I know everyone raves about ONR, but is that more for maintenance washes? Haven't looked into it much yet.
   
2. Snow foam - Chemical Guys Honeydew Snow Foam. I have a small bottle of this and I like the results, so I may buy a gallon unless I'm convinced otherwise!
   
3. Drying Towel - I have plenty of normal microfiber towels for touching up and interior work, but I don't have dedicated large drying towels. The Meguiar's X2000 drying towel was recommended a couple places on the sub and it seems like a good value; but I have heard Griot's is good as well. Any thoughts?
   
4. Polisher - Griot's Garage 6" DA Polisher. From what I have read, this seems to be one of the best-rated entry-level polishers. I haven't done enough research yet to know what type of pads/liquids I will need based on my specific paint, so I'll save those decisions for another day. The car was mostly well taken care of but there are a couple etched spots from what I'm assuming was bird poop or sap. There are a couple pictures in the album of this. Other than that, there seem to be an average amount of "swirl" marks but I'll need to do more research to determine what level of liquid/pads I need. I took the photos in the morning so I didn't have a good light source to show the "swirls".
   
   I already have some good stuff for cleaning wheels and I've been using Griot's Interior Detailer for the interior and it seems to be doing a good enough job. The interior isn't very dirty so just light cleaning suffices.
   
   As for CQuartz prep, before I am more confident in the paint correction process, should I apply a wax after polishing, or will that just make it more of a pain in the ass to decontaminate the paint when I decide to apply CQuartz in the next month or so? FYI, I'm going to be reading the DA polishing guides on this sub before I buy anything related to that.
   
   Any comments or suggestions on things I have selected?
   
   Thanks!

how about the Meguiar's one?

http://www.amazon.com/Meguiars-X2000-Magnet-Microfiber-Drying/dp/B0009IQZFM/ref=sr_1_1?s=automotive&ie=UTF8&qid=1405130888&sr=1-1&keywords=waffle+weave+drying+towel

$7.26 each?... any good?

BTW, I use a chamois to dry my car. One is almost as old as I am and the other one is a new synthetic one... so... anything else might be an improvement

Meguiars and Mothers both make waffle weave towels that are suitable for drying. They are not a Cobra Supreme Guzzler but they get the job done for cheaper.

Remember not to swipe and wipe to dry. Dab and soak up the water. Let the waffle weave do the work!

Here's a long thing I wrote for a friend just getting started. It was an email and i don't feel like fixing links.

1. Menzerna (Now called Jescar) Power lock Sealant:
   
   https://smile.amazon.com/gp/product/B0050IQH9K/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
   
   
2. Optimum Spray Wax (this is a topper wax to go on top the sealant, or touch up areas any time):
   
   https://smile.amazon.com/gp/product/B00GG9FI8I/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
   
   
3. Meguiar's Drying Towels (I HIGHLY recommend these, super effective) I got 2:
   
   https://smile.amazon.com/gp/product/B0009IQZFM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
   
   
4. Mother's detailer kit (gives you detail spray, clay bars, and micro fiber towel as a bonus)
   
   https://smile.amazon.com/Mothers-07240-California-Gold-System/dp/B0002U2V1Y/ref=sr_1_3?ie=UTF8&qid=1476666101&sr=8-3&keywords=mother%27s+detail+kit
   
   
5. Applicator pads
   
   https://smile.amazon.com/Viking-862400-Blue-Microfiber-Applicator/dp/B0051MYL8E/ref=sr_1_3?ie=UTF8&qid=1476666178&sr=8-3&keywords=wax+applicator
   
   
6. Buffing towels (for buffing in the wax or sealant)
   
   https://smile.amazon.com/Detailing-Multi-Use-Microfiber-Professional-Dual-Pile/dp/B01L4L4L26/ref=sr_1_17?ie=UTF8&qid=1476666651&sr=8-17&keywords=microfiber+buffing+towel
   
   
   
7. Proper wash mitt (just a microfiber towel won't cut it) - there's also a 2 pack with prime.
   
   https://smile.amazon.com/Meguiars-X3002-Microfiber-Wash-Mitt/dp/B000RXKR6M/ref=sr_1_1?ie=UTF8&qid=1476667551&sr=8-1&keywords=meguiars+wash+mitt
   
   
8. Car wash (this can be found at any autozone like store as well, this is a big bottle)
   
   https://www.amazon.com/Mothers-05664-California-Gold-Wash/dp/B0009H51B2/ref=sr_1_9?rps=1&ie=UTF8&qid=1476668207&sr=8-9&keywords=car+wash&refinements=p_85%3A2470955011
   
   
   
   
   Do you have 2 buckets to use? Always set one bucket up with the soap water, and the other with just water. Soak up your mitt, wash the car, rinse the mitt, then soak again in the soap water. This helps reduce contaminants. If you want to go the extra mile, get these for the buckets to prevent dirt from swashing around the bucket:
   
   https://smile.amazon.com/Grit-Guard-Insert-Red-Diameter/dp/B000N3W8J0/ref=sr_1_2?ie=UTF8&qid=1476667750&sr=8-2&keywords=grit+guard
   
   It fits in a home depot bucket.
   
   If you have particularly pesky tar or bugs on the car, you'll need this that you can get from any autozone type store:
   
   https://smile.amazon.com/Stoner-Car-Care-Tarminator-Remover/dp/B0002LBGWI/ref=sr_1_1?ie=UTF8&qid=1476667917&sr=8-1&keywords=tarminator
   
   WARNING **
   
   When using the power lock (or any sealant / non-liquid wax), DO NOT let it touch any black plastic or rubber parts of the car!!!!! If it does, just wipe it off with a wet micro fiber cloth. Failure to follow this will result in a white hue on the black piece. You could always painter's tape off those areas that are hard to avoid.
   
   Steps for this process:
   
   
9. wash the car, two bucket method with wash mitt.
   
   1b) Bring the car to an area with as little sun light as possible for the next steps!
   
   
10. Leave car wet. Use detail spray to keep all surfaces lubricated. Rub all surfaces down with a flat piece of the clay bar (flatten in your hand). About 2" diameter or so. Every panel or when the clay bar looks dirty, just kneed it a few times, folding it and re-flattening it. Every so often, throw out the clay and get some more. If you drop the clay on the ground, it's garbage throw it out. Each clay bar should last you multiple details of your whole car, just tear pieces off.
    
    
11. Dry the car down with the MF drying towels. Buff in any water spots, streaks, etc from the detail spray. If an area needs a little extra love, spray some detail spray on it and rub her in.
    
    
12. Use applicator pad. Apply a bit of sealant on the pad, even it out in the pad, and apply a thin layer of wax across the paint surface (NOT BLACK TRIM). You can use sealant on windows if you desire. Re-apply sealant to the applicator pad whenever you need more.
    
    
13. let the sealant dry (20-30 minutes, depending on conditions). It will haze when dry.
    
    
14. Use buffing cloths to wipe the haze out. You may need to do some hand "buffing", use different angles of sight to make sure the paint is now completely smooth and clean.
    
    
15. Let dry a bit, 20 minutes?
    
    
16. Spray VERY LIGHTLY with the optimum spray wax on paint surfaces. There are 2 settings on the bottle, make sure it is on the setting that spreads out the wax not a stream.
    
    
17. Buff in the spray wax with buffing towels.
    
    
18. ENJOY protection. Watch the beads of water fly off the car for the entire season.

get these towels: https://www.amazon.com/Meguiars-X2000-Magnet-Microfiber-Drying/dp/B0009IQZFM/ref=sr_1_2?s=automotive&ie=UTF8&qid=1497666477&sr=1-2&keywords=meguiars+drying+towel

i know they're kinda overpriced but they're amazing and as long as you dont do something stupid like drop them and keep using them, they dont swirl your clearcoat. theyre quite absorbent too, so soft. 2 of these will dry an FR-S. The first one will be soaked, but is enough to get the beaded water off your finish, then use the 2nd one to mop up.

In terms of wax, that Meguiars Ultimate Paste Wax is amazing. Synthetic so it lasts much longer than carnauba, and ive never had a wax go on and off so easily. Dries in like 5-10 minutes, and buffs right off. I was amazed! Leaves a helluva shine too. I put it on my glass and exterior lights as well.

Is this only for the windows and no paint? Do not ever use a squeegee on paint. For windows the glass is much harder than paint but still can scratch it yet this is very rare and your probably good. Have you considered a drying towel like below. Its $8 works amazing. No risk and you can use on paint.

http://www.amazon.com/Meguiars-X2000-Magnet-Microfiber-Drying/dp/B0009IQZFM/ref=sr_1_6?ie=UTF8&qid=1413229092&sr=8-6&keywords=automotive+drying

For a regular wash I'd suggest a product like Meguiar's Gold Class shampoo. You can find it at auto parts stores and amazon. Optimum No Rinse doesn't foam and is only intended for "waterless" wash (which really means 2 gallons of water).

P.S. Get yourself 3-4 good towels. I recommend these for their cost effectiveness + softness.
https://smile.amazon.com/Meguiars-X2000-Magnet-Microfiber-Drying/dp/B0009IQZFM/

What you're looking for is either wax used on duster jackets. Or Otter Wax.

As for removing: An iron and paper towels or a regular towel is best. You can also use a waffle weave drying towel. These suck up moister like magic. To do the pockets, just stuff them with something to fill them out and give support. To make the surface flat, cut a piece of cardboard to slip inside.

Whatever you use, I suggest putting tissue paper between the iron and the towel. This protects the material from scorching/melting, and from getting a bunch of crap on the iron's shoe.

Don't use autozone towels, the last ones I bought from there were 100% polyesther and can't absorb anything. I have a pile of these useless towels now and they're going to the garbage.

All links provided are Amazon.com links:

Get a towel that's 80% polyesther, 20% polyamide. It will absorb better. Meguiar's Supreme Shine towels. Get a bunch of them. Also a Water Magnet Towel for drying. When drying, you should get the microfiber / water magnet drying towel damp first, it will absorb more water much more easily.

Cheapest and quickest way to remove swirls, my recommendation is Meguiar's Ultimate Compound and some Gold Class wax. This kit has everything you need for $25 including the microfiber towels and foam pads: http://www.amazon.com/Meguiars-G3300-Brilliant-Solutions-Restoration/dp/B004EB12FS

Expensive but quickest and most effective way, get Meguiar's DA microfiber correction kit http://www.amazon.com/Meguiars-DMCKIT5-Microfiber-Correction-System/dp/B00CJ69F2W and buy the porter cable polisher. Also I recommend getting the Meguiar's car correction kit I linked above with this. You'll get excellent results.

Separate all your towels. Use dring towels only for drying, wax towels only for waxing, polishing towels only for polishing, and Glass towels (rainX) only for glass.