#1,756 in Electronics
Use arrows to jump to the previous/next product

Reddit mentions of OdiySurveil (TM) Metal CCD Security Housing Wall Mount Bracket for Oculus, Arlo, Arlo Pro and Other Compatible CCTV Cameras

Sentiment score: 12
Reddit mentions: 42

We found 42 Reddit mentions of OdiySurveil (TM) Metal CCD Security Housing Wall Mount Bracket for Oculus, Arlo, Arlo Pro and Other Compatible CCTV Cameras. Here are the top ones.

OdiySurveil (TM) Metal CCD Security Housing Wall Mount Bracket for Oculus, Arlo, Arlo Pro and Other Compatible CCTV Cameras
Buying options
View on Amazon.com
or
    Features:
  • Metal Housing Mount is ideal for your Oculus Rift cameras,Arlo /Arlo Pro Mount cameras or other little mount cameras,less 3 lbs camera will be preferable for installation;
  • Tilt Angle: 90degree,with OdiySurveil package;
  • Materials: Metal,ABS;Remind:There is another similar standard mount bracket with Alluminum Alloy material ASIN: B0756THMYR, high quality with great product. You can search on Amazon.com for purchasing.
  • Height of the CCTV Camera Mount: 6.5cm; Weight: 69g;
  • Package content: 1 x OdiySurveil CCD Camera Mount
Specs:
Height0.4 Inches
Length2 Inches
Weight0.05 Pounds
Width2 Inches

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Found 42 comments on OdiySurveil (TM) Metal CCD Security Housing Wall Mount Bracket for Oculus, Arlo, Arlo Pro and Other Compatible CCTV Cameras:

u/Honda_TypeR · 6 pointsr/oculus

That is a good idea. I had to kinda of wing it based on amazon purchase histories of other users (and their reviews)

Here is what I used if anyone is curious

https://www.amazon.com/OdiySurveil-Security-Housing-Bracket-Camera/dp/B00R96X9DS/

It came with 3 mollys and 3 screws for each one. Oculus sensor cameras are so light weight I did not bother using the mollys. I just used screws only (more than enough grip in drywall for our light weight cams)

u/steampvnc1880 · 5 pointsr/oculus

Yep. one more sensor is a must have. Also get three of these wall mounts
https://www.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
I tried going with 8 foot tripods for a while but you'll want as much floor space to walk around in as possible

u/TrefoilHat · 4 pointsr/oculus

It comes with two sensors.

Another post said Best Buy online has the single sensor, and you also may be able to buy it direct from Oculus (https://www.oculus.com/accessories/).

Don't wait to play roomscale games until you get a third sensor though. Two work surprisingly well, especially if you mount them high (ceiling or wall) and point them down. I used this one with Command strips to stick it to the wall without drilling holes.

Have fun!

u/livevicarious · 3 pointsr/oculus

https://www.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 These puppies are amazing. All metal, SUPER small, and have complete adjustment for height and rotation adjustment. 6 bucks.

u/remembertosmilebot · 3 pointsr/oculus

Did you know Amazon will donate a portion of every purchase if you shop by going to smile.amazon.com instead? Over $50,000,000 has been raised for charity - all you need to do is change the URL!

Here are your smile-ified links:

https://smile.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o02_s00

https://smile.amazon.com/gp/product/B00C7SA21U/ref=oh_aui_detailpage_o02_s00

---

^^i'm ^^a ^^friendly bot

u/CoryReyes · 3 pointsr/oculus

Just bought this.

You can unscrew the head of sensor and mount on this then put on wall

https://www.amazon.com/gp/product/B00R96X9DS/ref=crt_ewc_img_srh_3?ie=UTF8&psc=1&smid=A399QJ4AUP5BQK

u/shortyjacobs · 3 pointsr/oculus

I'm not him, but I used these and these. Looks great and tons of adjustability. I trimmed the command hook/loop strips so only the pull tabs stick out the bottom, (nothing out the top...since the strips are rectangles and the mounting base is circular...).

u/Pteroc · 3 pointsr/oculus

i dont think thats very necessary. though, yeah, might as well. i know exactly what he's talking about. any security camera mount will do.

here are the ones i got.

https://www.amazon.com/OdiySurveil-Security-Housing-Bracket-Camera/dp/B00R96X9DS/ref=pd_sim_63_34?_encoding=UTF8&pd_rd_i=B00R96X9DS&pd_rd_r=AKK3TTZB98ME2QCMTB4J&pd_rd_w=o7hH7&pd_rd_wg=jHVox&psc=1&refRID=AKK3TTZB98ME2QCMTB4J

you can get them in the perfect spot and angle, easy.

u/khoker · 3 pointsr/oculus

I use these camera mounts, which are $6.79 (with free Prime shipping) and give you basically 360 degrees of motion for tweaking the angle.

u/Anth916 · 3 pointsr/oculus

> Also note that their maximum recommended area is 8'x8'. And in the link from support the maximum distance between sensors is 14'.

Yeah, I saw that, but I imagine that they are underestimating the range to be on the safe side. I guess I might just have to experiment with the install. It's going to be a bit of a pita to have to experiment, but oh well. I ordered three of these mounts:
https://www.amazon.com/OdiySurveil-Security-Housing-Bracket-Camera/dp/B00R96X9DS/ref=sr_1_4?ie=UTF8&qid=1500067030&sr=8-4&keywords=cctv+mount

So, I'll be able to use these mounts to angle them down towards the play space better. (I currently have them on maximum tilt, but I still don't think they are angled down far enough) besides currently being too far away as well.

u/whitesox313 · 2 pointsr/oculus

No problem--I'll include them all, plus what I used to mount the cameras if interested. Again, no tracking or lag issues whatsoever. Works like it's plugged directly into the motherboard.

Headset Extension:
https://smile.amazon.com/gp/product/B00JJ519KC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Sensor Extension: https://www.amazon.com/gp/product/B00NH12O5I/ref=od_aui_detailpages00?ie=UTF8&psc=1

Sensor Mounts:
https://smile.amazon.com/gp/product/B00R96X9DS/ref=od_aui_detailpages00?ie=UTF8&psc=1

u/SpaceNinjaBear · 2 pointsr/oculus

I used these wall mounts. They're small, sturdy, and lightweight--perfect for the Oculus sensors. Medium Command strips are more than enough to hold them up.

Just a heads-up, the base plate is a concave shape, as in it's not completely flat on the bottom, but that's not an issue. You can put a single Command strip across two of the screw holes and the weight of the mount and the sensor will hold it to the wall.

u/flawlesssin · 2 pointsr/oculus

3M Dual Lock Reclosable Fastener SJ3560 250 Clear, 1 in x 6 Ft https://www.amazon.com/dp/B00JHKTDMA/ref=cm_sw_r_cp_apa_ZbVPAbP995C69

I used that and these mounts:

OdiySurveil (TM) Metal CCD Security Housing Mount Bracket for CCTV Camera https://www.amazon.com/dp/B00R96X9DS/ref=cm_sw_r_cp_apa_cdVPAbAYQ3Z36

No screws needed, and the Velcro hasn't moved a bit so there's no danger of your sensor falling.

They aren't tripods but they're very portable!

u/Nipz-TF2 · 2 pointsr/oculus

I don't have experience with that one, but I do have experience with a different type that I'm very happy with and would highly recommend.

https://www.amazon.com/OdiySurveil-Security-Housing-Bracket-Camera/dp/B00R96X9DS/ref=sr_1_5?ie=UTF8&qid=1521469198&sr=8-5&keywords=camera+mount
It's sturdy and still cheap, the swivel locks in place and the sensor screws right into it. It's very solid.
I mounted mine right to the ceiling in the corners of my room, and used cable trays to hide the wires.
https://www.homedepot.com/p/Legrand-Wiremold-CordMate-Channel-White-C10/202059078

u/cpverne · 2 pointsr/oculus

I just got one of these and put it on the wall last night:

Omall (TM) Metal CCD Security Housing Mount Bracket for CCTV Camera

https://www.amazon.com/Omall-Security-Housing-Bracket-Camera/dp/B00R96X9DS/

It's really small and light. To mount it, I got some large velcro command strips and cut 2 in half, putting the tabs half on the wall:

Command Damage Free Picture and Frame Hanging, Large Strips

https://www.amazon.com/Command-Damage-Picture-Hanging-Strips/dp/B00404YKZI/

Works great and doesn't seem to have an issue holding the camera up. I'll update if it ever falls off, but I doubt it will.

I'll post a picture of it mounted tonight.

u/rustysawdust · 1 pointr/oculus

There are some good for VR reviews for these ones: https://www.amazon.com/gp/product/B00R96X9DS

u/EarthlyDragon · 1 pointr/oculus

You could just use a security camera mount. Got mine for $7 on amazon

u/TacticalBeaver · 1 pointr/oculus

I use these and attach them to the ceiling/wall with 3M command strips.

https://www.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1

u/jonesRG · 1 pointr/oculus

Anything that supports a 1/4"-20 thread type. I used these and the extension cable that came with my LeapMotion HMD mount to run the 2 opposing cameras. Works great. There is some random occlusion but I rarely notice it in game, and its only if I'm close to the walls.

https://www.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

u/mav3r1ck92691 · 1 pointr/oculus

So it's tough for your space since it's pretty small. Given the furniture you have that could interfere I would probably place the one camera centered on the wall above your bed up near the ceiling and angled towards the center of your play area, and the other centered above your window near the ceiling.

Generally having them in opposite corners (this is how mine are) would be better, but your cabinets would get in the way. You might have some issues since you will be fairly close to the camera, but I think you can get away with it.

My cameras are mounted using 3m command strips and small camera mounts. I chose this route since I cannot drill into my apartment walls without losing my deposit. I just stuck the strips to the back of the mounts and to the walls. If you choose this route make sure you give the adhesive some time to set before you actually put the camera up (on both the camera mount and the wall).

These are what I used:

https://www.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B00LOQMCDM/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

u/Xalic · 1 pointr/oculus

sure. I bought two of these https://www.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 and just used drywall anchors I had to mount then on the wall my computer is on.

u/Phludd · 1 pointr/oculus

I have all 4 of my sensors mounted 7 ft up, I have switched back to only using 3 till I get this issue resolved.

I tried using the cable matters 16ft active USB 3.0 cable for one of my fronts sensors but it wouldnt detect as 3.0, so I swapped it for the 10ft passive one and it worked fine.

Here are the mounts and cable I have had success with:
Mount-https://www.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

10ft USB 3.0 cable-
https://www.amazon.com/gp/product/B00C7SA21U/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

u/HaCutLf · 1 pointr/Vive

If you don't mind hanging it on your wall you can get something like [this] (https://www.amazon.com/gp/aw/d/B00R96X9DS?psc=1&ref=yo_pop_mb_pd_title), or use one of the wall mounts that came with your base stations. You could also use a tripod or something.

u/Twelvers · 1 pointr/oculus

These worked great for me as far as the mounting goes. The 3M strips did work for ceiling mounting it, even though the bottom isn't flat. Eventually, after a month or so of testing I will probably screw them in.

I'd also invest in some cable hiders because while the mounted sensors look great, the wires look like shit running all around my room lol.

u/wiljc3 · 1 pointr/skyrimvr

https://www.amazon.com/dp/B00R96X9DS/ref=cm_sw_r_cp_awdb_t1_VgXbBbZGKXSYZ

I stuck them up with two medium size 3M Command strips each instead of drilling in my rental. They've been rock solid since August, so I can recommend this method!

u/EarlyVsMidThirties · 1 pointr/oculus

Omall (TM) Metal CCD Security Housing Mount Bracket for CCTV Camera https://www.amazon.com/dp/B00R96X9DS/ref=cm_sw_r_cp_api_Olqsyb7666GDV

Just sold out. But very small and cheap wall mounts.

u/Romthirty · 1 pointr/oculus

https://www.amazon.com/iSaddle-Thread-Double-Sided-Adhesive-Universal/dp/B00QSFKJ8E/ref=sr_1_12?s=photo&ie=UTF8&qid=1481588853&sr=8-12&keywords=saddle+dash+cam+holder

It's an Amazon seller, I ordered 3 of them and only received 2 of them so I can't say I recommend buying from that seller, but I do recommend the product. They are nice and strong, which is unfortunate that I didn't get all 3.

I placed an order for this one for my 3rd sensor:
https://www.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Which is almost the same, but doesn't have the 3M adhesive. I suppose I could buy my own adhesive, or I can use 3 thumb tacks as I've seen people do with these.



u/darealdsisaac · 1 pointr/oculus

USB Extension

USB card (This is the only one I've seen that is recommended. I need it because I don't have enough ports.)

Wallmlounts

Accessories total: $56
Oculus total:$497
Vive total:$500

u/shottogan · 1 pointr/PSVR

https://imgur.com/gallery/qIbQBB5

Retractable with great height, even with this low entertainment block. 😼🎶
Should work with either generation PS4 camera; just remove its stand.

I made one of the mount holes large enough (with a small drill bit.. ideally you'd have the proper bit size 🥴) to fit my TV's bolt. If yours is smaller screen size it may have smaller bolts.

The parts:

u/arnoldstrife · 1 pointr/Vive

It's a standard camera tripod mount. You can use any camera mount.

​

For example, https://www.amazon.com/OdiySurveil-Security-Housing-Bracket-Compatible/dp/B00R96X9DS/

​

But really any mount anything that uses the standard tripod screw.

u/carrotstien · 1 pointr/Vive

hmm, I might use THIS or THIS as a secondary mount point to try to reduce jitter.

u/lamuril · 1 pointr/oculus

These are the mounts we used, and a lot cheaper than the ones linked on the wiki: OdiySurveil (TM) Metal CCD Security Housing Mount Bracket for CCTV Camera


We also bought this 3.0 USB Anker port as I was under the impression we would need it and it was recommended on a thread. We actually ended up not needing it, but we still have it available in case we need to free up usb slots. I would double check on other threads that it does indeed work before just taking my word for it, as I haven't tested it yet personally