#34 in Home audio receivers & amplifiers
Use arrows to jump to the previous/next product
Reddit mentions of Onkyo A-9010 Integrated Stereo Amplifier
Sentiment score: 14
Reddit mentions: 28
We found 28 Reddit mentions of Onkyo A-9010 Integrated Stereo Amplifier. Here are the top ones.
or
High-quality Wolfson WM8718 DAC unit decodes PCM signals to 192 kHz and 24-bit resolution, to create beautifully open and airy analog sound from digital sourcesFeatures 192 kHz/24-bit-capable coaxial and 96 kHz/24-bit optical inputs to accept Hi-Res, lossless, or compressed audio signals from source devices including PCs and media streamersPowerful independent headphone amplifier for clear and detailed sound signatureBuilt-in MM phono equalizer, Phono Overload 94 mV (MM, 1 kHz, 0.5%)44 W/Ch (8 Ohms, 1 kHz, 0.08% THD, 2 Channels Driven, FTC)
Specs:
| Height | 5 Inches |
| Length | 13 Inches |
| Weight | 14.3 Pounds |
| Width | 17 Inches |
Onkyo A-9010 Integrated Stereo Amplifier https://www.amazon.com/dp/B00SY20TE8/ref=cm_sw_r_cp_api_fpYnybS5YT4WT
You're going to take a lot of shit for wanting to connect a turntable to a soundbar as opposed to a proper 2.0/2.1 setup arranged to the room's acoustics (generally recommended here and in any other music-related sub over a soundbar), but any receiver with an optical out will do, as you can add a phono preamp to the chain to get a line level signal out of the turntable. You CAN find amps/receivers with optical outs and a built-in phono stage, but they're likely to be more expensive and even a $50-$100 phono pre-amp will sound as good or better than anything built into a receiver. And going to component route means if anything does go out or you want to upgrade something, the modular element means it's a lot easier to do.
Edit: the cheapest new (and decent) amp that I found in a quick search that has a phono stage and optical out in it: Onkyo A-9010 Integrated Stereo Amplifier https://www.amazon.com/dp/B00SY20TE8/ref=cm_sw_r_cp_tai_J4mlxbKYNJZHB - this actually looks like a pretty decent amp for what you want to do, and it's only a little over your budget (whuch is going to be tricky going the new route anyway)
And if you're set on new for the turntable too: http://uturnaudio.com/turntables/ and add a cueing lever and upgrade the cart to the ortofon or grado in their custom build link and you've got a better table for a better price delivered to your door and ready to play.
https://www.amazon.com/gp/aw/d/B00SY20TE8/ref=mp_s_a_1_2?ie=UTF8&qid=1482886606&sr=8-2&pi=SX200_QL40&keywords=onkyo+integrated+stereo+amplifier&dpPl=1&dpID=31Fa7ZK54aL&ref=plSrch
Onkyo:
https://www.amazon.com/dp/B00SY20TE8/
https://www.amazon.com/dp/B009JBZFVK/
Yamaha:
https://www.amazon.com/dp/B00MXUCN0A/
https://www.amazon.com/dp/B00MXUCRG0/
Pioneer:
https://www.amazon.com/dp/B00LIQ3NM2/
https://www.accessories4less.com/make-a-store/category/stereoreceivers/home-audio/receivers-amps/stereo-receivers/1.html
I'll second the call to look at a set of Polk S20s. I just auditioned a pair of S15s and they're shockingly great for the price. Great resolution and soundstage with clean highs, gorgeous midrange, and a surprising amount of bass extension and impact. I'd have gone for the S20s myself, but space was at a premium. You can pick them up in either black walnut or brown walnut for $299 shipped, or step down to the S15s in either finish for $229 if you think the S20s are just too big for her tastes. Pair either of them with something like an Onkyo A-9010 and you have a great 2.0 system for $470 - $550.
As an aside, I totally get the having to placate your SO bit. Mine absolutely hated my previous setup, so I'm hoping she's much happier with these Polks around. Good luck!
Sub https://www.amazon.com/dp/B000092TT0/ref=psdc_172568_t2_B000P0528K
Speakers
https://www.amazon.com/Debut-Bookshelf-Speakers-Andrew-Jones/dp/B014GSEQ06/ref=sr_1_2?ie=UTF8&qid=1482250876&sr=8-2&keywords=elac+b6
Amp
https://www.amazon.com/Onkyo-A-9010-Integrated-Stereo-Amplifier/dp/B00SY20TE8/ref=sr_1_3?ie=UTF8&qid=1482250953&sr=8-3&keywords=onkyo+tx-8020
You'll probably want to look into speakers then an amp in that order. Speakers tend to be the most subjective and personal piece of the setup, so get those squared away, then figure out what to drive them with.
For speakers, check out:
I'm partial to Bowers and Wilkins myself.
For integrated amps, look at:
With a simple computer and two bookshelfs setup, I really like the NAD D3020 or its bigger brother, the D7050. The Cambridge 351A is probably one of the better options in this range, however.
Also, you might find you like powered speakers like Audioengine A5+ ($399) and HD6 ($749). AE has a great sound and features a built-in DAC. If you can demo them, see what you think.
I don't believe there will be an audible difference, personally, but I won't argue the point. There are definitely other options with better build quality and brand reputation.
The Onkyo A-9010 is a very popular integrated amp that lands squarely in your desired feature set:
https://smile.amazon.com/Onkyo-A-9010-Integrated-Stereo-Amplifier/dp/B00SY20TE8/
A better preamp might be this OSD model:
https://smile.amazon.com/dp/B01MPYJLPX/
And a better amplifier might be the Emotiva A-150:
https://smile.amazon.com/Emotiva-Audio-Stereo-Power-Amplifier/dp/B06XSCCVV1/
You could take a look at the Onkyo A-9010. It's well reviewed and has a built-in phono stage that may be good enough for you. I have one paired with Wavecrest HVL-1 and I'm very happy with it doing light music/soundbar alternative duty in the family room. It doesn't have a ton of power but what it does provide is clean and should power both the KEF Q100 and Klipsch speakers to very high volume without distortion. https://www.amazon.com/Onkyo-A-9010-Integrated-Stereo-Amplifier/dp/B00SY20TE8/ref=sr_1_1?s=electronics&ie=UTF8&qid=1487725773&sr=1-1&keywords=onkyo+a-9010
> urntable, tape and CD players, and an auxiliary input
what about this Onkyo A-9010 for $299
http://www.amazon.com/dp/B00SY20TE8/
PS you should search for "Integrated Stereo Amplifier" instead of stereo receiver
I want to start a new setup from scratch, do I have everything I need? This may seem like a very elementary question but I keep learning that I need different cables for this and for that
Turntable (Includes RCA cable)
Amplifier (Built in phono pre- I don't still need a preamp, do I?)
Speakers
Speaker wire (This goes from the speaker to the amplifier? Until yesterday I thought they just used RCA cables. Are banana plugs universal for all speakers?)
RCA Cable into audio jack (For computer- is something better than this that would accomplish the same thing? RCA to usb?)
Yamaha A-S301BL
Onkyo 9050 or the 9010
This is a great budget amp for a turntable if you are going the "new" route. Built in preamp, tons of bells and whistles and great sound for a low price. My buddy has this model paired with some B&W 602s and it sounds fantastic. Check the graph! https://camelcamelcamel.com/Onkyo-A-9010-Integrated-Stereo-Amplifier/product/B00SY20TE8?active=price_amazon&context=top_drops
step 1 is to check craigslist for vintage gear. some towns have a healthy market for it, some don't. I got a BEAUTIFUL Sansui 6060 for $80. Vintage can not only be more affordable, but are generally built like tanks, and will give you a nice "warm" sound that alot of modern stuff fails to get you. Ebay is also a valid option, but you just have to be really careful. Do your research. buy from people with alot of pictures and good descriptions, and preferably, some kind of return policy. expect to pay an extra $30 to $60 for shipping, but IMHO this is still better than buying new.
if you HAVE to get new, the Onkyo A-9010 and the Yamaha A-S301 are good for the $300-$350 price range. Both also have a phono stage, something harder and harder to find on modern amps, especially in this price range.
Undecided as of yet. Currently looking at a few options, the Yamaha gets a decent amount of praise, but I was really hoping to avoid the "big black box" though I am a function over form sorta person. The speakers should be 4ohm impedance but I'll test all that once the build is complete. Let me know if you have any suggestions, this is my first build and first "real" speakers. (currently have Pioneer SP-BS22-LR driven off some garbage lepai amp)
Yamaha A-S301BL
Onkyo A-9010
Emotiva Fusion Flex
Marantz PM5005
The XPA-2 is overkill for a set of bookshelf speakers and you will want volume control for TV/Movies. You only need to have line-out or sub out to feed your iNuke so any of these would work well, depending on if you need digital inputs:
Do I need (or would you recommend) a subwoofer to go with these Pioneer SP-FS52 speakers?
I'm asking because I have a two channel amp Onkyo A-9010 and it seems overly complicated to try and hook up the two speakers and sub. I am a little lost as what I should do.
https://www.amazon.com/ELAC-Debut-Bookshelf-Speaker-Black/dp/B01DKDJRH0/ref=sr_1_7?s=electronics&ie=UTF8&qid=1481579582&sr=1-7&refinements=p_4%3AElac
https://www.amazon.com/Pioneer-SP-BS22-LR-Designed-Bookshelf-Loudspeakers/dp/B008NCD2LG/ref=sr_1_2?s=electronics&ie=UTF8&qid=1481579773&sr=1-2&keywords=andrew+jones+pioneer+speakers
https://www.amazon.com/Micca-MB42X-Bookshelf-Speakers-Tweeter/dp/B00E7H8GG2/ref=pd_sim_23_1?_encoding=UTF8&psc=1&refRID=QHMW6HGG544CS3GXG66Y
What's your amp budget?
https://www.amazon.com/Onkyo-A-9010-Integrated-Stereo-Amplifier/dp/B00SY20TE8
https://www.amazon.com/Onkyo-TX8020-TX-8020-Stereo-Receiver/dp/B00EE18O7W/ref=sr_1_1?s=electronics&ie=UTF8&qid=1481579807&sr=1-1&keywords=onkyo+tx8020
https://www.amazon.com/SMSL-50Wx2-TDA7492-Amplifier-Adapter/dp/B00F0H8TOC/ref=sr_1_5?s=electronics&ie=UTF8&qid=1481579937&sr=1-5&keywords=class+d+amp
If you can swing it I would go for the ELAC speakers and ONKYO A9010.
Budget: Like to keep it under 800.
What I Need: Looking for an entry level system with a receiver to build around. Only want 2 speakers.
Where it will be used: In the family room of a 1600 square foot single level. The room is 15 x 15.
Use: Music (variety). Will use with Apple TV and PC for gaming and movie watching.
I was thinking about going with the Onkyo A-9010 https://www.amazon.com/Onkyo-A-9010-Integrated-Stereo-Amplifier/dp/B00SY20TE8
Speakers: I was going with floor speakers. These look good. Pioneer SP-FS52. https://www.amazon.com/Pioneer-SP-FS52-Designed-standing-Loudspeaker/dp/B008NCD2S4
Questions:
I want the system to be a incognito as possible to placate partner. Will the system sound good? Would lay people be impressed with the sound? Or is going to sound like a glorified 5 speaker special from Best buy? I'm willing to spend more on the speakers, up too $500 if there is a significant difference that a normal person could tell. I am not interested in a loud or party system. I'm in my mid thirties and got a little one. I am interested in new right now, and preferably from Amazon. Thanks for the help. I really appreciate it.
That sub is pretty strange, it looks like it came with a set at some point in the past. I'm really not sure how that gets powered. How were you using it before?
With your setup, I'd actually recommend just a stereo amp and a speaker switcher, rather than a full-blown surround receiver, if you're not using it to support video. There are lots of great stereo amps out there, but my personal favorites are the Emotiva A-100, and the Onkyo A-9010. Neither has a remote, but I've had both for some time, and both have served me well for all the different kinds of speakers I've thrown at them. If you're looking for something a little cheaper, this SMSL DAC/Amp sounds great, and has a remote.
If you are in the U.S. then something like the Onkyo A-9010 or 9050 would work for you (depending on what power you want). It is a straight up stereo receiver with option to add bluetooth if you want. Not sure on pricing but it's inexpensive.
It has a built in DAC and digital inputs as well.
Amazon has both for under $300
https://www.amazon.com/Onkyo-A-9010-Integrated-Stereo-Amplifier/dp/B00SY20TE8
My Rega P3 is currently running off of the A-9010 in my small listening room and it sounds great.
what about this one ?
https://www.amazon.com/Onkyo-A-9010-Integrated-Stereo-Amplifier/dp/B00SY20TE8/ref=sr_1_4?s=aht&ie=UTF8&qid=1488176459&sr=1-4&refinements=p_72%3A1248879011
I found the speaker specs here http://usersmanuals1.com/uifiles/139/477054/crescendo-cs-3006-manuals_n.png. Those will be pretty easy to drive at 90db efficiency so you won't need tons of power. If a TT is your main/only source I'd get a receiver/amp with a built-in TT preamp. Here are some options in your price range:
Onkyo TX-8020 $150 (50 WPC) https://www.amazon.com/dp/B00EE18O7W/
YAMAHA R-S300 $170 (50 WPC) http://www.accessories4less.com/make-a-store/item/yamrs300bl/yamaha-r-s300-2-ch-x-50-watts-natural-sound-stereo-receiver/1.html
PIONEER Elite A-20 $200 (30 WPC) http://www.accessories4less.com/make-a-store/item/piona20/pioneer-elite-a-20-direct-energy-design-integrated-amplifier/1.html
YAMAHA R-S500 $230 (75 WPC) http://www.accessories4less.com/make-a-store/item/yamrs500bl/yamaha-r-s500-2-ch-x-75-watts-natural-sound-stereo-receiver/1.html
Onkyo A-9010 $280 (44 WPC) https://www.amazon.com/dp/B00SY20TE8/
YAMAHA A-S301 $300 (60 WPC) http://www.accessories4less.com/make-a-store/item/yamas301bl/yamaha-a-s301-stereo-integrated-amplifier-with-built-in-dac/1.html
ONKYO TX-8160 $300 (80 WPC) http://www.accessories4less.com/make-a-store/item/onktx8160/onkyo-tx-8160-2-x-80-watts-networking-stereo-receiver/1.html
IMPO I'd recommend the Yamaha RS-300 or RS-500 in this price range.
The term "head unit" is typically associated with car audio, referring to the interface/receiver at the front of the car. However, I see now that you weren't referring to the amp/subwoofer, but to the Logitech's volume controller. The volume controller is needed because the speaker amp is inaccessible, being in the same box as the subwoofer. Usually in hi-fi/home audio you use the speaker amp or a preamp to control the volume (or the amp's remote control), so you have no need for this kind of unit. There are separate volume controls available though (e.g. Emotiva Control Freak), which are often used with powered speakers. I don't think hi-fi/home audio has a direct correlate to that unit, because usually your speaker amp is not inside your subwoofer cabinet, so you don't need one.
A powered subwoofer is a subwoofer driver (speaker) and a subwoofer amplifier in the same box. The alternative would be a passive subwoofer, which you would connect to an external amp. While most speakers are passive (requiring external amplification), most subwoofers are powered.
Speaker amps usually look like this or this. So no, most amps don't look like a subwoofer box combined with a separate volume controller.
I'm looking at this one and this one
Well, if you were looking for two channel I would do something like either this Yamaha or this onkyo. For speakers that would leave you 150 ea, for something like these wharfdale diamond speakers, which are a part of a larger series so you could expand them in the future to use these for surrounds and get a larger set like the Wharfdale 230's
If you want a surround sound system, you could always just pick a receiver like this Yamaha RX-V379BL or Denon AVR-S510BT
Best bang for your buck will be an integrated amp. Something like the budget stereo amp Onkyo A-9010 http://www.amazon.com/Onkyo-A-9010-Integrated-Stereo-Amplifier/dp/B00SY20TE8/ref=sr_1_1?ie=UTF8&qid=1463557044&sr=8-1&keywords=onkyo+9010 If you want to include the surround speakers you will be compromising on the quality of your stereo system but something like this would work: http://www.amazon.com/Yamaha-RX-V379BL-5-1-Channel-Receiver-Bluetooth/dp/B00V5VJ3TM/ref=sr_1_1?ie=UTF8&qid=1463556947&sr=8-1&keywords=RX-V379
Seeing as you play a lot of music from your computer it might be worth looking into getting a DAC although the onkyo amp mentioned above already comes with a built it DAC it only has optical or coaxial inputs. http://www.amazon.com/Behringer-UCA202-Audio-Interface/dp/B000KW2YEI/ref=sr_1_1?ie=UTF8&qid=1463557388&sr=8-1&keywords=uca202
edit: I didn't check your speakers, it is possible they need more power to run than the above mentioned amps.
EDIT: I've thankfully been corrected by Arve below, take a look at what he has to say on the matter.
They will work together, although it's uncommon to use studio reference amplifiers in hi-fi setups. You'd normally get an integrated amplifier, a 2-in-1 solution which includes a DAC as well as a powered amplifer, to drive your speakers.
Notable differences between the two are:
while integrated amps usually alter the sound signature in some way (warmer overall sound, improved detail retrieval, extended/tighter bass, wider soundstage, etc.) to make for a more "musical" listening experienceThat said, using a studio amp along with a separate DAC is definitely an option if you want the best bang for your buck and just need something to feed your system with enough power.
An integrated amplifier at about the same price as your current picks would be the Onkyo A-9010 ($300), which I've already recommended in another reply.