#602 in Health & Personal Care
Use arrows to jump to the previous/next product

Reddit mentions of Pharma-Quality Empty Nasal Pump Sprayers, 20ml (2/3rds oz) 3-Pack

Sentiment score: 5
Reddit mentions: 8

We found 8 Reddit mentions of Pharma-Quality Empty Nasal Pump Sprayers, 20ml (2/3rds oz) 3-Pack. Here are the top ones.

Pharma-Quality Empty Nasal Pump Sprayers, 20ml (2/3rds oz) 3-Pack
Buying options
View on Amazon.com
or
    Features:
  • Share your Snoot! Nasal Cleanser with friends and family with this 3-pack of replacement sprayers.
  • Also great for keeping extra Snoot at work, in your purse, on travel, at the gym and other places.
  • NOTE: these are EMPTY replacement SPRAYERS, and do not include any Snoot! Cleanser ingredients.
  • Consists of three (3) 20ml (2/3 oz) pump sprayers, each with an approximate .1ml spray volume per pump.
  • Great for dispensing nasal rinses...including Snoot! of course. Eco-friendly, recyclable packaging. TSA-compliant. Pharma-quality HDPE bottle with non-corrosive stainless steel pump components. Each sprayer comes with a safety clip and clear protective cap.
Specs:
Height1 Inches
Length5 Inches
Number of items1
Size3 Count (Pack of 1)
Width3 Inches

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Found 8 comments on Pharma-Quality Empty Nasal Pump Sprayers, 20ml (2/3rds oz) 3-Pack:

u/PersonalFreedoms · 6 pointsr/researchchemicals

Most Sincere Warnings:

  • Start with threshold doses and wait two or three hours before redosing, nasal bioavailability can be much higher than oral.

  • Nasal administration is absurdly tantalizing when it comes to redoses, to the point you can swear you will only dose X ammount and end up using up your whole bottle in a binge. Be VERY weary of this strong desire.

  • Because of the latter it is absolutely recommended you start with oral dosages so you can better assess the effects in a less compulsive fashion. This way you can research a single day and easily cut off usage for a week or two before the next session. Nasal administration tends to call for more escalation and it can leak into the next day.

  • Please, for the love of Thor, DO NOT MIX FENTS WITH U4, there have already been several lethal and non-lethal Over Doses. This is seriously, utterly, real.


    The Skinny:

  • Caustic substances are horrible when administered on mucous tissue, so a solution is called for. Isotonic saline solution is good enough, cheap, and sterile.

  • Glycerin (Pharmaceutical Grade, UPS Grade, or Pure Grade) is available in most pharmacies as well, it is an amazing substance.
    Quote:
    >Glycerine may be used on every part of the epidermis, including mucous membranes. When diluted to a concentration below 50%, it acts as an emollient and demulcent, finding important applications in ointments and lotions. Preparations for the most sensitive areas of the body-antiseptic, vaginal, nasal, analgesic, dermatological, and burn ointments and jellies-are commonly made of watersoluble bases compounded with glycerine. Glycerine, too, is one of the most widely used ingredients in medical prescriptions. Only water may exceed glycerine in its range of applications.

  • If you use 50% Saline Solution and 45% Glycerin, then you can finally add 5% of Menthol and/or Eucalyptus natural oils or essences (even if they contain some alcohol, the proportion will be too low to be irritant, and the glycerin will protect the mucous from drying up with it). The natural oils give the solution a pleasant smell that can cover some foul odors/taste (U4), and also have healing properties on their own.

    Using this information you can then calculate the concentration per dose, in accordance with your delivery system.

    The standard pharma quality nasal spray bottle (e.g. 1 and 2) can hold 25ml approximately (to the beginning of the neck) but are usually commercially sold with 15ml in them. They can hold 20ml with no problems at all.

    These bottles are almost universally designed to administer .1ml per push, which gives you 10 sprays per ml.
    You will have to make sure how many sprays your own particular bottle delivers by doing trials before adding the active ingredient.

    So usually 20ml will hold 200 sprays or "pushes".

    The standard RC Market U-47700 spray carries 3mg/spray = 3mg/push = 3mg/.1ml. That is 300mg:10ml or 600mg:20ml.

    PLEASE BEAR IN MIND FENTS ARE ABSURDLY POTENT AND SHALL NOT BE DOSED IN THE SAME PROPORTIONS THAN U4, YOU WILL HAVE TO RESEARCH THEIR DOSES

    3mg is a threshold dose of U4, so one spray will deliver threshold effects, 2 sprays will deliver common effects, and 3-4 sprays will deliver strong effects.
    Source

    Personally I made my first U4 Spray Bottle @ 2mg per spray, so I could be even safer to begin with. I would spray 4 times (8mg) for a full strong dose without tolerance.

    Because after having redosed a couple of times spraying your nosetrils 4 or 6 times leaves you with too much drip and sniffing like you have a cold, I decided to make my next spray @4mg/spray, this way I only need one or two sprays.

    I recommend you to start with a lower concentration.


    TRIALS TO DETERMINE ML PER PUSH

    You MUST calibrate your nasal spray bottle.

    First, if you will buy an over the counter spray bottle, ensure it is the pharmaceutical grade one.

    Pharmaceutical grade sprays have finger "handles" used to pull the delivery mechanism down with your Index and Middle finger, while you hold the bottom of the bottle with your Thumb.

    Read the instructions of your Over The Counter nasal sprays and look for said instructions, it they mention pulling with your Index and Middle finger while holding the bottom with the Thumb, then it is the bottle you want.

    If the instructions only tell you to push the bottle as needed, then it is not pharmaceutical grade. Usually the "push the belly of the bottle" sprays are meant to deliver solutions without active ingredients. When dealing with any sort of active drug the bottles call for specific pushes per hour and need consistency, they have an obviously more sophisticated mechanism:

    Vulgar Nasal Spray Bottle vs Pharmaceutical Grade Nasal Spray Bottle

    Once you have your Pharma Grade Nasal Spray Bottle, make the solution with the ratios I recommended above, but do not put the drugs in it yet!.

    Say you will make 20ml at your desired concentration

    Using proper measuring equipment (in reality you need at least a cough syrup measuring cup with graduation in milliliters) measure 10ml of Saline Solution, mix it with 8ml of Glycerine, and 2ml of Menthol/Eucalyptus Solution, mix well.

    You will end with 20ml of solution, pour it into the nasal spray.

    Prime the Spraying mechanism (prime means to push it until it shots a full spray) and then count how many full sprays you get out of it.

    Bear in mind you will have to hold it vertically to get the very last drops out of the bottle (it helps figuring out to which side of the bottom is bent the straw of the nozzle).

    You should get 198-202 sprays out of 20ml.

    If you do get .1ml per spray, you are set.


    MAKING THE SOLUTION

    Make a new batch of 20ml of the mixture of liquids, and then add the drug.

    At this point you should be using a simple kitchen beaker at least.

    Pour the liquid mixture into the glass beaker, and add the powdered drug.

    I have successfully dissolved 888mg of U4 into 22ml of the liquid mixture.

    About 60% of the powder "melts" into the solution immediately, but there are chunks of powder that will stubbornly stay solid.

    Do not shake too vigorously because chunks of powder will stick to the walls of the beaker.

    Instead heat a big mug of water in the Microwave for 45 seconds, and dip the beaker into the warm/hot water for 30 seconds, then take it out and swirl it slowly for 30 seconds.

    Repeat dipping the beaker into warm/hot water and slowly swirling the mixture until all the powder dissolves into the solution.


    Voila!



    BE ABSOLUTELY FUCKING CAREFUL, OPIOIDS ARE ADDICTIVE, HABIT FORMING, AND WHEN NASALLY ADMINISTRATED HIGHLY PRONE TO COMPULSIVE REDOSING

    SHIT IS NOTHING TO PLAY WITH, HONESTLY

    IF IN DOUBT AVOID THEM ALTOGETHER

    IF YOU ARE 100% CERTAIN YOU CAN DIP YOUR TOES IN THE WATER, BE READY TO DROWN NONETHELESS SO BE PREPARED FOR EMERGENCIES, AND NEVER UNDERESTIMATE THE DRUGS

    DO NOT FUCKING MIX THEM WITH ALCOHOL OR BENZOS

    FOR THE LOVE OF GOD KEEP THEM AWAY FROM THE REACH OF CHILDREN
u/bdog2398 · 3 pointsr/ketamine

Pharma-quality EMPTY Nasal Pump Sprayers, 20ml (2/3rds oz) 3-pack https://www.amazon.com/dp/B00H0LBEGQ/ref=cm_sw_r_cp_api_i_WwBzCbG7QJMZ6
These nasal sprayers
Everything else just buy at Walmart or any store really. Just saline nasal spray liquid and peppermint oil/extract

u/LSD145 · 3 pointsr/researchchemicals

For the spray you just need an empty bottle. This is the exact pack of bottles I got. They're really good, and it's only like 8 bucks for a 3 pack. The same company sells an amber glass version if you want that instead.

For saline you can do a few things, I had some left over from a medical use I had in the past. I also made some of my own after that that works really well. You could probably find some and buy it if you want, but I recommend making your own. Here's how:

Use distilled water (you can use tap water but make sure to boil it and let it cool before using it). Also use non iodized salt: sea salt, kosher, or table salt, it's all the same as long as it's not iodized because that'll dry your nose from what I read. Once you've got those 2 things, add a cup of water and a 1/4 teaspoon of the salt and a 1/2 teaspoon of baking soda (adjust amounts if you want, this will give you a lot left over). I don't know the purpose of the baking soda but every guide I saw said to use it. Once you got that, then you can make the solution, with either a syringe or beaker to measure the saline accurately and a scale to measure the 4f-mph accurately.

I tried to provide as much info as I could so you don't have to search around. Let me know if you need anything else, I'll do my best. Good luck! This is a great chem and using the nasal spray is my favorite by far.

u/alphac16 · 2 pointsr/researchchemicals

Yes. On amazon they sell nasal spray pumps in sets.
https://www.amazon.com/Pharma-quality-Nasal-Sprayers-3-pack-Empty/dp/B00H0LBEGQ
You take a shotglass and empty all of your u-47700 into it. Then fill your empty nasal spray bottle with distilled water and then slowly mix into the shotglass and use a tooth pick to stir and stir until all is dissolved. Then add a sprinkle of salt, like 2-3 shakes depending on salt shaker size. Then pour WITH CARE into the spray bottle and enjoy

u/Ytse22 · 2 pointsr/researchchemicals

This is what I use

I don't think that breaks the sourcing rule.

u/Chrysophyta · 1 pointr/researchchemicals

I would suggest using the following nasal sprayers:

http://www.amazon.com/Pharma-quality-Nasal-Pump-Sprayers-3-pack/dp/B00H0LBEGQ/ref=sr_1_3?ie=UTF8&qid=1453150984&sr=8-3&keywords=snoot+sprayer

They are convenient and work well in the context of a research lab.

U-4 is generally caustic and will damage mucous membranes if applied directly as a dry powder, tantamount to animal cruelty. A 0.9% wt NaCl solution is suggested for dissolving the U-4. Solubility will be roughly 20 mg U-4 per gm of Saline solution used. I would suggest aiming for 15 mg U-4/mL however, to prevent precipitation of the compound at colder temps and to prevent clogging the sprayer. The aforementioned nasal sprayers deliver approximately 0.1gm of solution per spray, equating to approximately 2 mg per spray for a 20mg/gm saturated solution.

The best salt for making up the saline solution is Morton's non-iodized salt, finely granulated and free flowing. Make sure to keep the salt stored in a dry place to prevent clumping via moisture absorption. I suggest doing everything gravimetrically instead of volumetrically, due to ease of use and higher accuracies obtainable. Use a mg scale to weigh the U4, and operate in the higher ranges of it's scale (for instance, weigh out 100-400 mg of U4 at a time and make 5-20 gm of solution at a time or more, at 20 mg/gm saturation). Use a common 200 gm capacity 0.1 gm resolution scale for weighing out the liquid solution. Each spray, at 20 mg/gm solution, will deliver 2 mg of U-4. Always test it out with 1 spray at first, you don't want to kill off your animals because someone sent you the wrong thing. Make sure to wait at least 2 hours after the first test before continuing. When using the saline solution, it shouldn't damage mucous membranes, even after weeks of testing. All of this information is for the hydrochloride salt.

I also suggest using amber glass bottles to store, to both prevent bacterial growth and promote compound stability. If you see stringy substances in the solution after a while, throw it out. Bacterial lung infections are not worth the cost. I also advise against using propylene glycol as a co-solvent for the same reason, to prevent bacterial growth. PG is a sugar, and bacterial will grow on it. Ethanol (190 proof in the US) is a good solvent, but is very harsh on mucous membranes. Store unused compound for up to two weeks in the fridge. If you need to store it for longer, loosen the cap on the bottle and freeze it. Re-tighten the cap after freezing. When you are ready to use, loosen the cap, and let the bottle thaw at room temp, and make sure the substance fully redissolves.

I would also suggest against using heat to get it into solution, as it will just eventually precipitate, and you will damage your equipment. If you want to fix the nasal sprayer, run straight D/I water through it until the clog resolves. Do not do testing on a daily basis, eventually life will lose meaning for your animals.

u/filarea · 1 pointr/researchchemicals

This is the same RoA I've been using for hex to save my nose.

Tek

  1. First thing you need is saline solution (saline solution with aloe works wonders, buy it at Walgreens)

  2. Second thing you need are these to hold the solution Snoot! sprayers

  3. Pour 15 ml saline with aloe in one of the Snoot! Nasal sprayers.

  4. Measure out 2000mg or 2g of hexen powder and pour it into the sprayerwith the 15ml saline/aloe solution. This will create a 100mg/ml solution out of 20ml solvent,

  5. Hot bath the mixture till the hexen full dissolves with the saline.

    And you're finished! Each metered Snoot! spray constitutes to 0.1ml or 10mg of hexen.
u/kcasnar · 1 pointr/researchchemicals

Is there an advantage to using amber glass over opaque plastic? I use these, from the same company. https://www.amazon.com/Pharma-quality-Nasal-Sprayers-3-pack-Empty/dp/B00H0LBEGQ/