#743 in Computer networking products
Use arrows to jump to the previous/next product
Reddit mentions of Powered OTG HUB Micro USB Ethernet Network Adapter for Raspberry Pi Zero, Google Nexus Player, Windows Android Tablet
Sentiment score: 2
Reddit mentions: 14
We found 14 Reddit mentions of Powered OTG HUB Micro USB Ethernet Network Adapter for Raspberry Pi Zero, Google Nexus Player, Windows Android Tablet. Here are the top ones.
or
- Host OTG cable to 3 USB & LAN adapter -- Adds additional 3-Port OTG USB extension; Adds 10/100 Mbps wired internet connectivity
- Driver-less design for Windows 8.1 / 10 (32/64 bit) or up, Mac OS 10.9 or up, and Android 6.0 or up operation system, Chrome OS
- Compatible for Raspberry Pi 2, Amazon Fire TV Stick, notebook, Tablets, and computer with one available micro-b port
- Built-in DC power port, supports 5V power adapter, a power cable included; It only powers USB 2.0 HUB and NOT the host; It charges the added USB device
- It has limited Android compatibility. Android users, before you buy, be sure to look if the device has a (grayed out) "Ethernet" menu in Settings under WIRELESS & NETWORKS. Most probably it will just work then
Features:
Specs:
| Color | Micro-USB Ethernet Adapter and OTG HUB |
| Height | 0.59 inches |
| Length | 3.74 inches |
| Weight | 0.07 Pounds |
| Width | 0.83 inches |
Sure: http://www.amazon.com/gp/product/B00L32UUJK?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s01
It also powers the Pi! I accidentally unplugged the Pi and it kept working. Took me a minute or two to figure out was going on. Also networking. Also dirt cheap. (However 3x the cost of the Pi).
Smays 5-Pin Micro-USB to RJ45 Ethernet Network Adapter for Android Tablet Computer / PC / Notebook with 3-Port USB HUB and 3.5mm DC Port https://www.amazon.com/dp/B00L32UUJK/ref=cm_sw_r_other_apa_RsgxxbYG0FDZ9 Personally, I used this. Has external power and micro USB connection so no OTG adapter is necessary. Ethernet also just in case, I used it for Pi Hole.
I have both the Pi3 and the Zero. The Zero cost me $15, then bought a Smays Micro USB Ethernet with 3 Port Hub for $10. Saved only $10, but Pihole doesn't need the extra power of the Pi3 (seems like a waste). But it could be a cleaner setup. Good thing is, with the hub, I have it powered by the USB port on my router
https://www.amazon.com/dp/B00L32UUJK?ref=yo_pop_ma_swf
It'd work but that adapter has a lot of bad reviews on Amazon. I'd suggest a more expensive (but properly working) adapter like this if you want extra (powered) USB ports, this if you don't need full-size USB ports, or this if you want a HAT instead.
I bought this one some time ago.
https://www.amazon.com/gp/product/B00L32UUJK/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
I have the hub powered, from a wall charger, and plugged it in to the pi zeros usb port.
I was surprised to find the pi zero powered up.
No separate power supply needed for the Pi zero.
Network port worked without any troubles also.
And NO the pi zero is not going to fit inside the one i have. The Hub is too narrow.
I just have the two taped together and hanging on the wall for my pi-hole needs.
http://www.amazon.com/gp/product/B00L32UUJK?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00
This is the one I have. I can also use this to plug in my 360 controller receiver, so it's pretty useful.
I have this one, because it also has ethernet, and works perfectly.
I did notice there is a warning on raspberrypi.org about hubs "backfeeding" from the hub, and it could fry your pi. The SMAYS one I have will power the pi through the USB, so thinking of modding it to put a diode in-line to block power going back into the pi.
I use this one https://www.amazon.com/dp/B00L32UUJK/
But I am sure this one would also work without the USB hub https://www.amazon.com/dp/B009XU6N54/
https://www.howtogeek.com/142044/how-to-turn-a-raspberry-pi-into-an-always-on-bittorrent-box/
https://www.amazon.com/Smays-Ethernet-compatible-Raspbian-Raspberry/dp/B00L32UUJK/ref=sr_1_1
mini hdmi to hdmi cable
This is the one I have: Click here
I use it on raspbian lite and it works a charm! Should work on reteopie too! Even has 3 normal USB ports to plug a keyboard or mouse or anything else.
https://www.amazon.com/Smays-Ethernet-compatible-Raspbian-Raspberry/dp/B00L32UUJK may work for you, I don't know if the version of android on the K1 has drivers for it.
Keep in mind that it's only 10/100, not gigabit, so wifi may technically be faster.
I bought a random USB+Ethernet hub off of Amazon and it worked for the first week with my Nexus Player. Then it stopped working. When I get home tonight I'll unplug, reboot and try it again and see if it works. Here's what I bought, by the way.
I found this but I'm not sure if it would work on your phone.
https://www.amazon.com/Smays-Micro-USB-Ethernet-Computer-Notebook/dp/B00L32UUJK
I tried this: Smays Realtek RTL8152 based Micro USB Ethernet with 3 Port Hub compatible Windows / Android / Raspbian Jessie Tablet, Linxu Raspberry Pi 2/Pi Zeros https://www.amazon.com/dp/B00L32UUJK/ref=cm_sw_r_cp_api_9Y5Jyb1K66E02
I had a 5v 2a barrel connector that fit the power port on the adapter. It worked, the stock was powered from the adapters power port, the USB hub part worked as well. I didn't try storage. I really didn't notice any performance change. But I am fortunate to have good wifi. I figured I'd try it out for travel purposes.