#13 in Industrial & Scientific
Use arrows to jump to the previous/next product

Reddit mentions of Propylene Glycol - USP - Kosher - Food Grade - USP - Kosher - 36 oz net wt in a 1 Quart Safety Sealed HDPE Container with resealable Cap

Sentiment score: 20
Reddit mentions: 37

We found 37 Reddit mentions of Propylene Glycol - USP - Kosher - Food Grade - USP - Kosher - 36 oz net wt in a 1 Quart Safety Sealed HDPE Container with resealable Cap. Here are the top ones.

Propylene Glycol - USP - Kosher - Food Grade - USP - Kosher - 36 oz net wt in a 1 Quart Safety Sealed HDPE Container with resealable Cap
Buying options
View on Amazon.com
or
    Features:
  • Food Grade USP Kosher
  • Pure Propylene Glycol
  • Finest Quality Propylene Glycol
  • Crystal Clear
  • Safety Sealed Resealable HDPE Container
Specs:
Colorclear
Height3.25 Inches
Length8.75 Inches
SizeQuart
Weight2.20462262 Pounds
Width3.25 Inches

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Found 37 comments on Propylene Glycol - USP - Kosher - Food Grade - USP - Kosher - 36 oz net wt in a 1 Quart Safety Sealed HDPE Container with resealable Cap:

u/paingawd · 12 pointsr/electronic_cigarette

Here's the short and dirty list:

  • Scale for mixing by weight It's recommended that you start mixing by weight. It makes your results more repeatable and cuts down on cleanup.

  • Vegetable Glycerin

  • Propylene Glycol

  • Bottles to contain your juice(I prefer HDPE bottles over PET or glass) A great vendor on Amazon for bottles is 510 Central. Get a few different sizes: 10 ml for testing flavors and new mixes, 30-120 ml bottles for making larger batches of juice(I usually use 30 or 60 ml bottles)

  • Labels for said bottles. You can go with printing your own on a printer, or you can slap a piece of masking tape on the bottle and write the juice name on that with a sharpie. Choice is yours, but use some sort of label so that you're not playing "guess the flavor" after a week's steeping.

  • Nicotine, if you use juices that contain nic. If you're a no-nic vaper, skip it. If you want nicotine in your juice, don't go cheap. Two of the most suggested companies to source nicotine are Carolina Extracts and Nicotine River. Carolina is more expensive, but it's clean with ZERO flavor(That's a good thing) I just recently ordered some nicotine from Nic River, so I can't speak to quality, but it's what a good number of mixers use. I prefer to mix with 100 mg/ml nicotine in a 100% PG base. PG-based nicotine is less prone to "hot spots"-Areas of liquid in the container where the nicotine concentration is higher than specified on the label. Hot spots are more common with VG-based nicotine(So I've read). Regardless of whichever base you choose to go with, ALWAYS shake your nicotine before using it or pouring off into a smaller container! In fact, ALWAYS shake your ingredients! Nicotine and flavor concentrates should always be brought to room temperature and shaken before use to ensure that they haven't settled between mixing sessions.

  • Flavors. Don't go willy-nilly buying flavors that sound good. Some work well with each other, and some get along about as well as Jack Daniels and pizza. Instead, find 2-3 recipes that sound good to you and buy the concentrates to make those juices.

  • Head over to /r/DIY_eJuice and read the sidebar. Once you're done, read it again. I'm not trying to sound elitist. There's a shit-ton of great info in the sidebar and wiki. Use the knowledge that others have gathered together in one place to your advantage. There's even a "first flavors list" over there that if followed, a new mixer can make some very decent juices straight out of the gate.

    That's the quick run down. It's a blast to do, and a helluva lot cheaper than buying at your local B&M! The up-front cost is a little steep, but for about $100 you can get to making some great juice.
u/pyr02k1 · 6 pointsr/DIY_eJuice

On that starter kit you mentioned... It's fine, but it isn't the best route if you think you might stick with this.

First up, read up on mixing by weight. /u/Botboy141 has a fantastic write up on it. It ends up being cheaper and faster long term versus mixing with syringes. Take into account that you should use different syringes for each flavor and you'll have to clean them after use... The cleaning murders the time mixing and that kit doesn't have many syringes, so you'll be cleaning a lot.

A break down for you on mixing by weight... It isn't 100% I'd bet, but it should be close enough.
Scale: 16.99 http://www.amazon.com/gp/aw/d/B0012TEQMG - this is the one I have, but the auto shut off is a friggin annoyance. Pick up the one Botboy141 recommends for the extra 14 or so dollars. So let's go with 30
Pipettes: 10.00 for 500 1ml. http://www.amazon.com/gp/aw/d/B005CD2I50
10 for 200 3ml (you can probably find a better price) - http://www.amazon.com/gp/aw/d/B005IQTSE0
Dispensing bottles x2: 7.00 http://www.amazon.com/gp/aw/d/B00B5139AG
Pg: 13.00 http://www.amazon.com/gp/aw/d/B005F5OJG6
Vg: 13.00 http://www.amazon.com/gp/aw/d/B004C7MTLA
Nicotine: 100mg/120ml 19.00 http://www.nudenicotine.com/product/500ml-100mgml-100-pg-nicotine-base-for-mixing-only/ 50 30ml ldpe bottles: 11.00 http://www.amazon.com/gp/aw/d/B00F098JJA

$113, call it 130 with some shipping here and there.

Now add flavors, assuming you get 50 bucks of 8ml vials from wizard labs and you're running closer to 200. This will get you a good bunch of juice and the next time around you'll probably get 4oz bottles of your favorite flavors and maybe some more pg vg nic and possibly pipettes. It's worth the money, but syringes will be cheaper up start costs. You'd probably save about 70 bucks to start, but it'll cost you in frustration and time, which isn't worth the pain from all I remember with them.
Edit: I say wizard only because of the sample size of the vials... You can use bull city, tfa and lorann direct for 4oz and up on a bunch, or any other vendor really. But 50 in wizard with shipping will probably get you 25 or 30 vials.

Syringes will take away the scale and dispensing bottles and pipettes, so 60 bucks actually, and you'll add about 30 back in a bunch of 1ml, a few 3 or 5 and a couple of 10 for pg/vg and14ga blunt needles.

Hopefully that helps a bit. I can reformat it later on the computer if need be.

u/jonnyfunfun · 6 pointsr/ploompax

It's just food grade propylene glycol. I bought this big guy - 1qt (32oz) for $13 - and it'll last me for a lifetime.

u/thefourthdr · 6 pointsr/electronic_cigarette

Tips.

  1. I don't recommend a kit, but that's just me.
  2. Mix by weight. Buy this scale https://www.amazon.com/American-Weigh-Scales-LB-501-Digital/dp/B005UGBG20/ref=sr_1_3?ie=UTF8&qid=1474497797&sr=8-3&keywords=Digital+scale&refinements=p_89%3ADigital+Scale%7CAmerican+Weigh+Scales. The 500g one, not the others. You want 0.01g precision.
  3. Don't buy random flavors. Pick one or two juices over at http://e-liquid-recipes.com that sound good to you and have a good rating. Buy the flavors to make those.
  4. Buy your VG and PG here. https://www.amazon.com/Glycerin-Vegetable-Kosher-USP-Quart/dp/B004C7MTLA/ref=sr_1_2_a_it?ie=UTF8&qid=1474497923&sr=8-2&keywords=vegetable+glycerine and https://www.amazon.com/Essential-Depot-Propylene-Glycol-Quart/dp/B005F5OJG6/ref=pd_sim_121_1?ie=UTF8&psc=1&refRID=D735R4MZTM0WJN6VZ840
  5. Get some pipettes. Plastic Transfer Pipettes 1ml, Graduated, Pack of 500 https://www.amazon.com/dp/B005CD2I50/ref=cm_sw_r_cp_tai_77W4xb3TT4MQX
  6. Get good nicotine. I like Carolina Xtracts and Nude Nicotine
  7. Read everthing here. https://www.reddit.com/r/DIY_eJuice/wiki/diy_beginners_guide
  8. Read the everything here. https://www.reddit.com/r/DIY_eJuice/comments/3lu9gx/nicotine_need_to_know_all_your_questions_answered/
  9. Read eveything here. https://www.reddit.com/r/DIY_eJuice/wiki/verified_vendors
  10. Watch this. https://youtu.be/EMEY5L46b18
  11. Wear protective gloves if you buy high percentage nicotine solution!
  12. Enjoy your freedom. You're right, it is fun to do. And easy. My wife calls it vaking :)
u/PM_Me_Your_Clones · 6 pointsr/electronic_cigarette

If you do it like that, I can see your math. However, if you do it like this:

https://www.amazon.com/dp/B00WUPUYCC/ref=cm_sw_r_cp_apa_YptHxb7EHCH6V

https://www.amazon.com/dp/B005F5OJG6/ref=cm_sw_r_cp_apa_KqtHxbP3G3QW7

http://www.carolinaxtract.com/#!product/prd12/3738421821/120ml-sample-100mg-ml-nic-html

http://store.flavorah.com/All-Vaping-Flavors_c_8.html (Or Bull City or ECX or Gremlin, etc. - let's call it $50 in flavoring)

https://www.amazon.com/dp/B005UGBG20/ref=cm_sw_r_cp_apa_TxtHxbBFM078P

https://www.amazon.com/dp/B000B9V20W/ref=cm_sw_r_cp_apa_NBtHxb23GQ99V

You can make ~4L/4000ml of 3mg/ml for ~$150 or a little under $0.04/ml, so ~$4.50 per 120ml with supplies left over.

Maybe I'm mistaken in thinking ~$150 isn't large scale but I'm sure many people on here spend at least that much in a six month period (five 250ml of Blue Dot will run you $187).

u/lite_acker · 3 pointsr/electronic_cigarette

Keep the amount of sweetener low or zero and it will have the biggest impact on coil life. Low flavor will help in general, but some flavors hardly contribute to coil gunk at all, so it depends on which flavors you use. I haven't noticed any difference in the rate I change coils using 50/50 and 70/30, and I use both regularly in different setups.

BTW, it sounds like you are trying to decide between a finished nicotine base, 50/50 or 70/30 with maybe 6mg/ml nic added already, for example... Sorry if I misunderstand. That way does work but I do it the other way around, and mix my flavor base, then add nicotine to suit the order. If you buy VG, PG, and 100mg/ml nic each in its own bottle, you will have infinite flexibility with every bottle you make.


It's cheap too:

https://www.amazon.com/Glycerin-Vegetable-Kosher-USP-Quart/dp/B004C7MTLA/ref=sr_1_4_a_it?ie=UTF8&qid=1506167220&sr=8-4&keywords=vegetable+glycerine

https://www.amazon.com/Propylene-Glycol-Quart-KOSHER-PURE/dp/B005F5OJG6/ref=sr_1_4?ie=UTF8&qid=1506167242&sr=8-4&keywords=propylene+glycol

u/goatnapper · 3 pointsr/DIY_eJuice

First, watch this, then come back: How to make your own E-Liquid : Mixing by Weight - DIY Tutorial I hate youtube tutorials, and I still recommend this, so seriously, watch it.

Now, a warning. You can spend a tiny amount to start DIY, or you can just take the plunge and spend a good chunk, but be set for a while and the cost per ml drops even more.

So you'll need supplies. Other than nicotine and flavorings, Amazon works pretty well.

  • Pipettes For adding nicotine, everything else we'll put in squeeze bottles.
  • Scale
  • VG
  • PG

    I put my PG and VG into some squeeze bottles I found at wal-mart for $0.97. Makes dispensing them super easy (just like in the video). You can also find them on Amazon for slightly more, but Walmart is on the way to work, so I just stopped there.

    I put my flavors into dripper bottles, which I got from Heartland Vapes, but that only works if you want 100+. Free shipping is at $75, so I also threw flavors into my orders, since I'd need them anyway. Personally, I started with single flavor juices that I knew I'd like. I ordered a lot from MtBakerVapor, and most of their flavors are just single flavor FlavorWest (FW) stuff, so I grabbed them. I made those for a month, then I started buying more flavors (like my favorite, TFA Chai). Now I'm adding more flavors into my juices, judging on what I think would work well (it doesn't always). Start simple, then build on what you learn.

    Buy some nicotine from your preferred vendor, if you want nicotine in your juice.

    Then wait impatiently while USPS loses your package in San Diego, CA, during which you can download the calculator and experiment with it. The bottom calculator on the side bar is amazing. Now you're going, "Crap, I gotta weigh my liquids!". Well, not really. You can take the specific gravities off the manufacturer data sheets (sometimes there, sometimes right, don't trust the ones from FW), google them, or ask here and someone probably has them. Or, you can use the built-in weights for PG and VG, and then set your flavors to 1ml = 1g. It's close enough.

    Most of all, remember to have fun.

    Quick tip: Better not enough flavor than too much. Too much flavoring mutes the flavor, not enhances, and spearmint burns your lips when you add too much. You can always add more, you can't take away.
u/Treefeddy · 3 pointsr/electronic_cigarette
  • Essential Depot PG and VG: $26 for 2560ml
  • 120ml 100mg/ml Nicotine: $19
  • 8ml concetrates: $1.50 each

    Just need 2 1ml syringes with 14g needles and 1 5ml or 10ml syringe with a 14g needle, some bottles (which you can reuse glass bottles), and you're good to go.
u/horquat · 3 pointsr/worldnews

Yeah that's not too bad. Of course you can get 1000ml of concentrate for $45! We bought 120ml of concentrate from three sources (1, 2, 3) to compare and she didn't notice a big difference between them. They've all been in the freezer since and still taste fine 3 years later (actually one of them is completely gone and the other 2 are getting pretty low).

I just started with an online calculator and went from there; it's easy to get to whatever % you normally vape at.

I found out quickly that plastic syringes suck - they wear out and the eliquid melts the markings off. So I got a few glass syringes off of ebay (though really I've only ever needed one).

Initially I was super-careful with the nicotine concentrate as it can be fatal in really small doses, but after handling it a bit I realized it's actually very safe and easy to handle. Unless you squirt it in your eye or mouth you aren't going to have a problem - but you definitely need to keep it away from children and pets.

Then a few glass dropper bottles, PG and VG.

Whenever she's getting low she'll order a few different flavorants (usually from here) in 10ml bottles. I rarely mix flavors as it's simpler not to - just dump a full 10ml bottle into a dropper bottle, add 4-6ml of nicotine concentrate, then around 20ml each of PG/VG. Let it sit a week and it's ready to use.

u/MarsHuntress · 3 pointsr/researchchemicals

He's never gonna hear the end of this!

Okay, here's my answer. I go the oral route. I make a solution using propylene glycol (aka "PG").

My recipe for 4-ACO-DMT: .5g powder --> 4ml PG, combined in a small amber dropper bottle. Shake well until totally smooth. In my experience, 8 drops is a good starter dose. I just put the drops into a beverage and down it.

Obviously, you need a scale. You can get a decent one for under $20. One that is highly recommended the Gemini-20.

u/Hopkins3030 · 2 pointsr/electronic_cigarette

Are you looking for unflavored nic juice or just straight VG or PG?

For unflavored nic juice, Wizard Labs has some pretty good pricing when they actually have it in stock (they also carry literally tons of flavors).

As for straight VG or PG (for DIY flavor mixing) Essential Depot on Amazon has Kosher grade VG and PG.

u/machipu · 2 pointsr/electronic_cigarette

Here is PG and VG, but I'm not sure how to check shipping rates to you.

You could also try using /r/juiceswap if you need someone to re-ship it to save on costs.

u/MadddBlade · 2 pointsr/DIY_eJuice

Hey dude! I purchased a starter kit when I started making E-juice, and while it was helpful I quickly realized that I could of gotten more for less had I known what I needed. It is a lot cheaper to just buy the products individually since you will also be getting a larger amount too. Here are some links and in my opinion this is the cheapest way for someone to start DIY:


VG- https://www.amazon.com/Glycerin-Vegetable-Kosher-USP-Quart/dp/B004C7MTLA/ref=sr_1_2_a_it?ie=UTF8&qid=1480546689&sr=8-2&keywords=vegetable+glycerine


PG- https://www.amazon.com/Essential-Depot-Propylene-Glycol-Quart/dp/B005F5OJG6/ref=sr_1_3?ie=UTF8&qid=1480546865&sr=8-3&keywords=propylene+glycol


Gloves- https://www.amazon.com/Liberty-Glove-Industrial-Disposable-Thickness/dp/B01MZZ0FHO/ref=sr_1_2?ie=UTF8&qid=1480546913&sr=8-2&keywords=nitrile+gloves


Syringes- https://www.amazon.com/10-Pack-Refilling-E-Liquids-Applicator/dp/B01HFTYINS/ref=sr_1_6?ie=UTF8&qid=1480546884&sr=8-6&keywords=blunt+tip+syringe


Nicotine- https://www.nudenicotine.com/products-page/unflavored-nicotine-base/

And as for bottles it is all up to you I personally buy mine from http://wholesale.heartlandvapes.com/eliquid-bottles/plastic-eliquid-bottles.html

*Lastly all you need is flavorings, I think it would be best for you to search around and find what you like, I personally prefer http://gremlindiy.com/ and http://www.bullcityflavors.com/ . Hope this helped!

u/Paulg287 · 2 pointsr/DIY_eJuice

Nicotine quality varies so sick with a reputable source like nude nicotine. Pg and vg are about the same but I'd still get it from a reputable source. This seems to be the cheapest and is good quality.

Glycerin Vegetable Kosher USP 43 oz https://www.amazon.com/dp/B004C7MTLA/ref=cm_sw_r_awd_2tYJub1T9F4VY

Essential Depot Propylene Glycol 1 Quart Essential Depot http://www.amazon.com/dp/B005F5OJG6/ref=cm_sw_r_udp_awd_quYJub0G6VXPH

u/iKrunk · 2 pointsr/electronic_cigarette

I have been getting my PG and VG from Amazon. Its cheap and if you have prime it gets there super fast.

I use the essential depot VG, and PG. I get them quarts at a time for like 11-13 bucks apiece and that shit lasts a long time. You will go through more VG than PG usually.

I used to get my nicotine from wizard labs but I recently started using nude nicotine, I recommend it. In the DIY sub youll see a shit ton of vendors and a bunch of brands people swear by. Thats the part that can be overwhelming.

you can get bottles so many fucking places, if you just want a few amazon will do you right, wizard labs has em. Lately I have been just getting them from fasttech cause they are decent bottles (plastic) and they are cheap as fuck. when searching for bottles a good tip to have is 1/2oz bottles are 15mls and 1oz bottles are 30mls,

https://www.onestopdiyshop.com/ is a pretty awesome place.
http://wholesale.heartlandvapes.com/ is nice too.

For just starting you dont need much, PG, VG, NIc, Bottles, Flavors, Get a couple of 1ml and 3ml Syringes, and some 14g needle tips for VG based shit, and 18G tips for PG based shit.

My mixes are mostly VG, so I get my nicotine in VG Carrier base. I think I have pretty much covered most beginner info. I hope you decide to check it out its pretty rewarding and fucking fun.

Come hang out, Lurk about or whatever


I forgot you will also want to use a ejuice calculator, I use the POTV ejuice calculator on my phone it works well and its free. Its in the Android and iOs store. Peace!

u/doublediscdude · 1 pointr/vaporents

As others have said, food grade propylene glysol. I bought this for ~$15, looks like it's even cheaper now.
http://smile.amazon.com/gp/product/B005F5OJG6

u/JackPC · 1 pointr/DIY_eJuice

LOL SORRY! I'm a smartass by nature, couldn't resist. Amazon is an excellent source for PG, relatively cheap for a quart that should last a while. I'm sure what you bought is fine being USP, I just prefer products that are marketed for homo sapiens :-)This is what I ordered.

http://www.amazon.com/gp/product/B005F5OJG6/ref=oh_details_o01_s00_i01?ie=UTF8&psc=1

u/Modki · 1 pointr/Vaping

Here is what I get.

Here is the PG

I get my flavours from wizardlabs

u/dcux · 1 pointr/electronic_cigarette

If you prefer a 50/50 blend, you could do that too. I bought a quart of VG on amazon for ~$12.

VG on Amazon / PG on Amazon

Or order from a place like Nude Nicotine, pre-mixed (1L of 50/50 is $14)

u/DigitalCloudVapor · 1 pointr/electronic_cigarette

Depends on the PG/VG ratio. Seems most "high end" e-liquid don't put this on the label. It looks like they use 30/70 mix, after a quick google search, which might be a little too thick for your tanks. You could always thin it out by adding some PG, but you would be reducing flavor slightly and lowering the nicotine.

u/Diabloviro · 1 pointr/RCSupplies

mixing any podwer consist of a carrier and the powder.

DO you have a a fine mg accurate scale. Many of the cheaper scaled aren't accurate until 6 mg or more

Create a sheet with your desired concentration. 100mgs Etiz to 200ML of https://www.amazon.com/Propylene-Glycol-Quart-KOSHER-PURE/dp/B005F5OJG6/ref=sr_1_3?ie=UTF8&qid=1503001430&sr=8-3&keywords=propylene+glycol

equals 1CC equals 2mg of etiz. I advise you not to make strong blends and frankly, you should combine ingredients and shake daily for about three days and they should be blended. I wouldnt worry about heating unless you're jonesing.

u/da1man · 1 pointr/researchchemicals

This is the PG I buy personally, never had an issue with it, not sure about any b&ms though that would sell it. https://www.amazon.com/Essential-Depot-Propylene-Glycol-Quart/dp/B005F5OJG6/ref=sr_1_2?ie=UTF8&qid=1480096297&sr=8-2&keywords=propelyn+glycol

EDIT: You might be able to find PG at a drug store, I forget the exact purpose of it in medical use but if I remember correctly some drug stores will carry PG.

u/hav0c15 · 1 pointr/Vaping

Hmm some of those things aren't really necessary and there isn't enough VG/PG to last a while. I would recommend you piece together yourself everything you need and mix by weight. At first I tried mixing by volume but that was inaccurate and my mixes sucked. Here are most of the supplies you'll need.

VG

PG

Nic - I use Vape Clarity nic myself but their warehouse is being rebuilt after a fire so they're not operational until the end of the month. Here's an alternative I saw in the DIY subreddit.

Scale - Make sure to get the 500g one so that it measures out to the hundredths place.

I use www.bullcityvapor.com to get all the flavors I need in one place.

For bottles, I've just been rinsing out empty bottles my friends give me.

I don't bother with gloves but I use very diluted nic so that's not an issue for me (might want to use them if you have anything over 36mg/ml nic).

Here's the calculator I use and a tutorial.

u/senorchip · 1 pointr/electronic_cigarette

I get my pg & vg from amazon. great prices. Just mix it in the ratios you want & your good to go. I vape unflavored juice with nicotine because I prefer it, it seems like a lighter less complicated vape than with flavors. Sometimes when I am bored I will put in some menthol for a change

http://www.amazon.com/Essential-Depot-Propylene-Glycol-Quart/dp/B005F5OJG6/ref=sr_1_1?ie=UTF8&qid=1416509782&sr=8-1&keywords=propylene+glycol

http://www.amazon.com/Glycerin-Vegetable-Kosher-USP-43/dp/B004C7MTLA/ref=pd_sim_indust_1?ie=UTF8&refRID=0HC83A0EQFYJHWVJG8HQ

u/nickz34 · 1 pointr/4acodmt

Propylene Glycol (kosher food grade) is a much much more sensible solution to use for volumetric dosing.

Propylene Glycol - USP - Kosher - Food Grade - USP - Kosher - 36 oz net Weight in a 1 Quart Safety Sealed HDPE Container with resealable Cap https://www.amazon.com/dp/B005F5OJG6/ref=cm_sw_r_cp_tai_w-AGDbHA5WZ71

u/whattrees · 1 pointr/vaporents

Some comments:

2 You are looking for an Ego Threaded Beauty Ring.

3 You can also buy MUCH better tanks like an Evod for cheap and they have replaceable coils so they are worth the investment. I personally have had better luck with something like a protank or BDC, but anything with replaceable coils will be a big step forward. Also the better build construction means less leaking.

4 PEG-400 is not really an ideal base for any ejuice. It has a bad taste and does not carry flavors very well. You would have much better luck using Vegetable Glycerin or Propylene Glycol.

u/kernozlov · 1 pointr/electronic_cigarette

You can. I prefer to buy it off Amazon though TBH.

I buy Essential Depot Vegetable Glycerin And Propylene Glcyol

No reason I just like to stick with one company.

Heres The DIY Clone list. The all loved Nana Cream is on there and Im vaping it now and its wonderful. I think enough flavoring to make like 120ml was $10???? Cant remember off the top of my head.

u/niktbh · 1 pointr/oilpen

Make sure your searching for propylene glycol here is a link Propylene Glycol 1 Quart - USP - KOSHER - PURE and here is some pg flavors on amazon that you may also consider there cheaper from their main site though. [here](https://www.amazon.com/s/ref=nb_sb_ss_c_1_10?url=search-alias%3Daps&field-keywords=one+on+one+flavors&sprefix=One+on+one%2Caps%2C159&crid=34XZSVFR8VU73(

u/aqble · 1 pointr/DIY_eJuice

Amazon has a quart of VG for $13.47 and PG for $10.95. I believe a lot of vape suppliers use that Amazon seller (Essential Depot) as their source.

Not sure about flavors, I haven't bought any yet.

u/soad2237 · -3 pointsr/DIY_eJuice

Ask away brother.

Don't let people like /u/abdada discourage you from asking questions. Just because the answers are out there doesn't mean that we shouldn't have conversations about them. The world is an ever-changing place, and a sidebar on an internet forum is not the repository for all of the answers in the universe.

And to answer your question, I actually purchased my PG and VG from Amazon. Probably not the best source, but I have no complaints about the quality or price. Essenial Depot is the brand name.