#7 in PC game & accessories
Use arrows to jump to the previous/next product

Reddit mentions of SNES Controller to Adapter for PC USB

Sentiment score: 42
Reddit mentions: 85

We found 85 Reddit mentions of SNES Controller to Adapter for PC USB. Here are the top ones.

SNES Controller to Adapter for PC USB
Buying options
View on Amazon.com
or
    Features:
  • Connect your SNES or SFC controller to your PC USB Port
  • Two players can play simultaneously, USB self powered
  • Standard HID (Human Interface Device) compliant, no drivers needed, just plug and play
  • Suitable for both Destop and Notebook PCs
  • Compatible with Windows 98, ME, 2000, XP, Vista and Windows 7
Specs:
Height0.787401574 Inches
Length6.692913379 Inches
Size1 Pack
Weight0.1 Pounds
Width5.118110231 Inches

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Found 85 comments on SNES Controller to Adapter for PC USB:

u/Vidyogamasta · 21 pointsr/gaming

If it's about the controller, I'm sure there are adapters to USB for pretty much anything. SNES, NES, Playstation. Of course these are of varying quality since I just pulled the first thing I found, but it's not too hard to adapt the most nostalgic part of the hardware to work with modern equipment.

And with something like the NES/SNES classic, the rest of it is exactly like an emulator. No cartridges or anything, just a ROM library that you choose from. The UI for game selection is going to be marginally better than an emulator would be, but that's about it.

u/AustinDontthink · 18 pointsr/snes

Just use an original SNES controller! Get one of these to convert it to USB. Been doing this for years, works amazingly!

u/The_Dude_Abides2000 · 11 pointsr/RetroPie

You can but kits that come with controllers and everything you need.

Or you get cool cases:

http://retroflag.com

Pair it with a couple of these:

http://www.8bitdo.com/n30-f30/

Or gut a dead system and buy this switch:

https://mausberry-circuits.myshopify.com/collections/frontpage/products/shutdown-circuit-use-your-own-switch

You can wire it up to any switch (including the NES power and reset and led) to shut it down via gpio.

I bought one of these so I could play with 2x original snes controllers:

https://www.amazon.com/gp/aw/d/B002IXZ5DE/ref=mp_s_a_1_1?ie=UTF8&qid=1506732529&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=mayflash+snes+adapter&dpPl=1&dpID=51hPNAF1v9L&ref=plSrch

I use ps3 controllers when I play old school metal gear.

u/fiwer · 10 pointsr/Games

SNES USB Adapter

Buy one of those and a used ORIGINAL SNES controller (very important, don't use 3rd party crap) in good condition. Costs probably $25 total and there is simply no better controller for pre-N64 consoles than the original SNES.

u/nbcaffeine · 9 pointsr/patientgamers

could get something like this and use the original controller on the PC http://www.amazon.com/SNES-Controller-Adapter-USB-Super-NES/dp/B002IXZ5DE

u/5k3k73k · 7 pointsr/gaming

Raspberry Pi 2: $35

SNES controller adapter: $11

32 GB MicroSD card: $10

Power Supply: $10

Case: $7

RetroPie: $0

The ability to play your favorite games forever: Priceless

u/[deleted] · 6 pointsr/snes

If you've got the original SNES controlers, I recommend the SNES-to-USB adapter which works great with my two original ones and my ASCII pad.

u/subterfugeinc · 4 pointsr/raspberry_pi

I have this

No drivers needed. Just SNES controllers. Works flawlessly.

u/gmcemu · 4 pointsr/funny

Here's the one I bought off amazon. It works great but it's the og japanese version that has a shorter cord than the US version. So you may want to get a usb extension cable if your planning on playing very far from from your pc. I use a mayflash adapter to connect it to my pc and it's automatically recognized by most platformer type games I play like super meat boy, super house of dead ninjas, and electronic super joy.

u/aviat0rshades · 3 pointsr/RetroPie

I'm currently making one to use with original SNES controllers. I've tried two different adapters and this one has worked the best for me.

https://www.amazon.com/gp/product/B002IXZ5DE/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

u/zworkaccount · 3 pointsr/somethingimade

Very nicely done. If anyone is wanting one of these and doesn't want to make it themselves. I have this one and it works great. Just make sure you read the reviews.

http://www.amazon.com/SNES-Controller-Adapter-USB-Super-NES/dp/B002IXZ5DE/ref=sr_1_3?ie=UTF8&qid=1344111177&sr=8-3&keywords=snes+usb

u/TheSnowNinja · 3 pointsr/gaming

> but it's more satisfying to have the original controller in your hand

This is close.

This is for the purest that uses emulators.

I'd probably play old games on emulators or something these days. I still have my old SNES, but the place where the adapter plugs in is broken, so the power cuts out randomly.

I keep it for nostalgia. I think it's fun to keep some of my old toys.

u/nathew42 · 3 pointsr/alttpr

A snes to USB adapter might be an option.

I use the ibuffalo and it does the job. I feel like the d-pad is a bit stiff though.

u/wolffer · 3 pointsr/gaming

Could always get a USB->SNES adapter and use an actual controller.

u/singularity2030 · 3 pointsr/Games

This is the one I have.

And emulators are on everything now. If you want portable, you can have portable. A RetroPie setup is a good example. I have mine in a tiny NES replicable case. Or I can put them on the tablet I travel with if I want to.

u/Bananacup · 3 pointsr/ReviewThis

Grab a SNES controller if you don't already have one, and get one of these. In my experience there's nothing better to play pre-N64 era games with.

u/willaien · 3 pointsr/retrogaming

Notably, I didn't destroy a working SNES. I bought a broken one to use for the case.

Some tips:

  1. If you're going to use the front controller ports, like I did, you'll want to cut the traces. I'll post some pictures of this when I get home.
  2. The bill of materials was, essentially, an HDMI extension cable (short), USB extension cable, some hot glue, solder and a mayflash snes controller adapter which I sacrificed for this purpose.
  3. Don't be like me and hot snot the raspberry pi in such a way that the microSD card is hard to reach.
u/AsteroidBlues · 2 pointsr/emulation

I can't speak to that particular model but I have a different Mayflash adapter and it has worked great for me. I would definitely try another one of their products.

u/sealcouch · 2 pointsr/Games

http://www.amazon.com/gp/product/B002IXZ5DE/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1

Just keep in mind that it only works with SNS 002 controllers and not SNS 005. I tried a few of them to no avail.

Works beautifully. I wouldn't change a thing about it.

u/MainHaze · 2 pointsr/gaming

An emulator with one of these definitely makes it acceptable. Not quite the same... but pretty damn close!

It amazes me how strong those SNES controllers are. They still work like a charm for me.

u/orokro · 2 pointsr/emulation

I recommend the Mayflash one:

http://www.amazon.com/SNES-Controller-Adapter-USB-Super-NES/dp/B002IXZ5DE/ref=sr_1_1?ie=UTF8&qid=1368562837&sr=8-1&keywords=mayflash+usb

It creates two "game controllers" in windows, like this:

http://i.imgur.com/hyGfxs6.png

It's cool that a single USB device allows you to use 2 SNES controllers - and it's decently cheap too! Way better than having to buy 2 or 4 separate devices.

Caution: you may be tempted by SNES-USB controllers (SNES clones that have USB built in) I tried one of these and it's horrible - the buttons weren't as responsive as a real controller and overall it felt cheap. That actually made me dig out my real controllers and buy the adapter.

>No idea why you'd want to use the N64 controller

It's not THAT bad. I'm kinda like a purist - I like playing the games like I did growing up. It's hard to find a controller that matches the AB + C buttons, and I don't like using "L2" as Z. Yeah, out of my 3 N64 controllers, one of them has a faulty stick - and the other two... the stick works fine but feels like a "N64 stick," but I like it. Brings me back.

u/Samen28 · 2 pointsr/raspberry_pi

As someone who has an original SNES pad and has used an 8bitdo controller, there really is no difference in weighting (if anything, the 8bitdo is a hair heavier?).

If you really want authenticity, you can connect an original or reproduction SNES pad over USB using one of these, but you may want to look into refurbishing as SNES pads tend to get a bit gummy over time.

u/peachey777 · 2 pointsr/pcmasterrace

My wife just got me one of these for Christmas. You already need to own the controllers though

u/candre23 · 2 pointsr/raspberry_pi

SNES would be ideal, since the SNES gamepad was probably the pinnacle of game controller design. Wire up one of these internally, and you're good to go.

u/Soulstripper14 · 2 pointsr/speedrun

Yeah, thats basically what a capture card does, as for the snes controller, you would have to buy an adapter http://www.amazon.com/SNES-Controller-Adapter-USB-Super-NES/dp/B002IXZ5DE but it also super easy to set up an xbox controller if you have one and dont want to buy an adapter. And dont worry we were all new at some point. :D

u/ehock · 2 pointsr/theindiebox

I can't really recall them ever making new runs of any of their products. The item page is probably still there to show buyers the types of things they have sold in the past.

But are you interested in the Towerfall controller because you want a SNES-esque controller, or because you actually want this specific item?

If it's just a USB SNES controller you're after, there are many cheap alternatives to find online. Or you can even get an adapter like this and use a real SNES controller.

u/CareerRejection · 2 pointsr/gaming

Honestly buying the adapter and using legit controllers is better IMHO. This is what I use personally with two legit controllers. Doesn't require drivers or anything so it works right out the box. The iBuffalo button scheme is not concave like a normal NA controller so to me it feels unnatural to play my classic games on.

u/BangkokPadang · 2 pointsr/gaming

This is absolutely the best way I've found to play most Indie Games like Shovel Knight, Super Meat Boy, VVVVV, etc. I also use this method when emulating NES/Gameboy/SNES/GBA/etc.

I love it. I have 8 SNES controllers stored in zip-lock bags so I'll always have a good gamepad.

This is the best SNES->USB Adapter I've ever used. I tried a couple, and have used one for Wii as well. Every other one I tried but this one had problems. Most only recognized 2 or 3 button presses at a time, and one in particular (the one for wii) seemed to not only have terrible lag, but seemed to miss button presses all the time. It felt like it was maybe only checking for inputs maybe 30 times a second, and if you pushed the button in between when it was "checking" for button presses, it missed it.

This adapter is the Mayflash brand SNES -> USB adapter, and has 2 inputs in one device, so it is perfect even for local multiplayer gaming. I bought mine on Amazon.com for @ $8.00 US, and they seem to sell for @ $12.00 US now. It would honestly be worth $30 or $40 US.

It can be purchased from here.

I use a mac. I dual boot into windows for a few games, but due to the wonderful market GOG and the Humble Bundle have cultivated, most indie games come out for mac. So, I spend 90% of my time in OSX, and do almost 100% of my gaming in OSX as well. (Until the Oculus Rift comes out, anyway ;-p )

If you, too, use a Mac for most of your gaming, then let me introduce you to the greatest thing for setting up awesome, fluid, game controls OSX has to offer. Controller Mate.

Controller Mate allows you to map any USB Device/Keyboard/Midi Device, etc. to any function, in any program, based on any condition. If the function isn't built in, then you can build it using timers, input counters, axis measurements, etc.

For this application I simply remap each input to the corresponding keyboard key, such as up, down, left, and right arrows as well as the A,B,X,Y,L, and R buttons. I map Start to Enter, and Select to Tab.This makes most games show me the correct buttons instead of generic USB terms such as "button 1" or "button 2."

These mappings are also set to only apply when a particular list of programs is running. This allows me to have multiple keyboard mappings for multiple games, and never have to manually switch between them.

I cannot recommend this program enough. It is a must for any mac gamer, and blows any other keyboard remapping programs out of the water.

It is available fromOrdered Bytes' Website for @ $25.00 US. I got my copy on sale a few years ago for $15.00 US, but it is honestly worth double what they charge for it. I have it controlling not only my games but a bunch of software on my system. It is indispensable.

u/Leron4551 · 2 pointsr/RivalsOfAether

I have one of these: https://www.amazon.com/SNES-Controller-Adapter-USB-Super-NES/dp/B002IXZ5DE

Never thought to use it with RoA, but it works pretty well with Joy2Key in order to map the buttons to keyboard inputs.

u/geauxwave · 2 pointsr/RetroPie

The one i have is by Mayflash... SNES Controller to Adapter for PC USB https://www.amazon.com/dp/B002IXZ5DE/ref=cm_sw_r_sms_awd_dV36wbEFZM4X1

EDIT: I just realized you said NES, not SNES. I actually don't have NES ports. What I did was make a NES to SNES adapter by buying two sets of extension cords and splicing the proper wires together. The end product is an extension cable with a NES receptacle and a SNES plug. Let me know if you want the wiring diagram. I have it somewhere.

u/anavrintobin · 2 pointsr/Games

You could always get an adapter and use an original snes controller :D

u/yooman · 2 pointsr/RPi_Arcade_Build

If you want wireless retro controllers, you could use these wireless SNES controllers with one of these SNES-to-USB adapters. Also, a regular Xbox 360 controller with one of these receivers would work (even though it says "for Windows," i believe there are good Linux drivers for Xbox 360 controllers). The controller connections will all be USB, with whatever USB adapters you want.

Edit: the SNES-to-USB eBay link I had posted went dead. Replaced it with a different one from Amazon.

u/FS_NeZ · 2 pointsr/speedrun

As someone who started with Kaizo a few months ago, I can actually give some advice.

I started with Learn2Kaizo - big mistake. It won't help you much as it's mostly trick into trick into trick and doesn't have "real" levels. I then played through Quickie World 1, started Kaizo Kindergarten and finally played through Robfather World which I recently started speedrunning. Overall, I learned the most in Quickie World, but I actually recommend Robfather World as the first "real" hack. Learn2Kaizo, Quickie World and Kaizo Kindergarten all have HUGE balancing flaws. Robfather World has one harder level, sure, but overall the hack is way better as a starting point. Quickie World helped me improve a lot, but one level, Sawrfing Castle, took me over 9 hours to beat - almost half my total hack clear time. Playing Quickie World as the 2nd or 3rd hack would've been better probably.


How to start with Kaizo:

  1. Get one of these USB adapters: https://www.amazon.com/SNES-SFC-Controller-Adapter/dp/B002IXZ5DE
  2. Buy an original SNES controller somewhere (or already own one), plug it into your PC with the adapter
  3. Get a SNES emulator like https://www.emulator-zone.com/snes/snes9x
  4. Download the original SMW rom somewhere on the internet
  5. Download FLIPS: https://www.smwcentral.net/?p=section&a=details&id=11474
  6. Download the patch to Robfather World: https://www.smwcentral.net/?p=section&a=details&id=20190
  7. Open FLIPS, open the patch, open the SMW rom, save the new Robfather World rom
  8. Open your SNES emulator, got to Settings, activate "Reduce input lag"
  9. Open Robfather World.


    (The other method, or if you want to play on original hardware is to buy an original SNES, an Everdrive, a SSD card and a good ol' TV. All that does though is further reduce input lag so it's a cost/reward kinda thing.)

    As general advice... take your time, be patient, don't rush it, stay focused. Kaizo teaches life lessions. Dying over and over and over and over again is part of the learning curve. Get used to it. Yeah... you will die. An awful lot. 50 times on the same jump? Sure. 100 times? Definitely. But every Mario that dies one pixel later in the level is PROGRESS. Be proud if you die on the 2nd jump instead of the 1st. Be HELLA PROUD when you die right before the checkpoint. Don't rage. Retry. Until you get it. And then you will get it.
u/Doomguy504 · 2 pointsr/snes

I use of of these adapters and my old snes controllers and it works perfectly. Highly recommended if you want to keep the feel of the original controllers.

u/Wazowski · 2 pointsr/pcmasterrace

I got a pair of the retrolink NES pads and one didn't last a year. Switched over to this product and I'm much happier.

Though more often I use this adapter with a SNES pad. It functions flawlessly.

u/ShinDigpay · 2 pointsr/pcmasterrace

I personally use a Buffalo SNES USB, but you can actually wire Original SNES controllers up to a Pi, or just use a SNES USB adapter.

u/OldSkooRebel · 2 pointsr/pcmasterrace

On PC I can use an Atari 2600, NES, Genesis, SNES, N64, PS1/PS2, Gamecube, XBox, PS3 (with bluetooth), Xbox 360, Wii (with blutooth), XBone (Micro USB), PS4 (Bluetooth) and Wii U Controllers as well as the the countless other 3rd party controllers.


On Xbox 360 I can can use an Xbox 360 controller.

u/jjmiller1980 · 1 pointr/emulation

I got this adapter to use with my Raspberri Pi:

http://www.amazon.com/gp/product/B002IXZ5DE/

It works well. Really, here's the problem. If you buy the retro style USB ones, they're almost all cheaply made, and don't feel good. If you buy an actual used controller, they're usually well used. It's hard to find one that still has that satisfying "clicky" feel when you press a button, and it can be difficult to find replacement parts.

If you go for a retro style USB controller, the iBuffalo SNES one is decent, I have it. If you want to go for the real deal, the adapter I linked to works well for me.

u/NawNaw · 1 pointr/RetroPie

I use this Mayflash adapter I bought in 2015 on my Retropie, and it works great.

u/tSRDazz · 1 pointr/ouya

As a UK-ian, I imagine there to be alternative US links. But here are the UK ones, exact ones I ordered :)

NES: http://www.amazon.co.uk/gp/product/B004L5KHKS/ref=wms_ohs_product?ie=UTF8&psc=1
SNES: http://www.amazon.co.uk/gp/product/B002IXZ5DE/ref=wms_ohs_product?ie=UTF8&psc=1

u/kaliwraith · 1 pointr/Metroid

I am finally happy playing an emulator because of this adapter

I own it on SNES (and Wii) but I'm replaying super metroid: redesign (I love the new physics!) and I can finally use an original controller for it! My old 12 button gamepad still is great, though.

u/arcademe · 1 pointr/cade

the way i'd do it is to have an internal powered usb hub, and then have each controller adapter (like this one) permanently plugged in and stored in the cab itself. then just have the console ports mounted and accessible. i'm pretty sure as long as you didn't move the usb console adapters, the emulator would retain the settings, even if you plugged/unplugged the actual original controllers. you might have some overlapping control settings between emulators, but who cares, you aren't going to be playing two games at once.

u/seg-fault · 1 pointr/gamecollecting

I have a few of them, but none are that great. The real deal is what you really want if you're already going through the trouble of buying the knockoffs.

I don't know if you're playing on original hardware or an emulator, but buying something like the retrode is really useful if you want to hook up SNES and/or Genesis controllers. There are 2 inputs for each (4 total) and you can plug in cartridges from either system to back up their gamesaves or game data (not really necessary if you have valid ROMs obtained elsewhere.

You can then use your gamesaves on emulators (including those on your mobile phone) and continue your game. When you get back home you can load the save from the emulator back onto the cartridge and play on your TV.

It's really a no-brainer if you collect carts. If you enjoy Genesis and SNES and have controllers for both, I'd strongly consider. If you just want to hook up controllers over USB and nothing else, then just get this.

/not affiliated with retrode

u/yeeah_suree · 1 pointr/snes

Some people on here seem to use ROMs, but I think a majority of us like to have the carts. I have a USB SNES Adapter and frequently test out games on emulator, and when I find a game I like I buy it on cart.

It just feels better playing on the console, and there's a pride to having a collection. That being said I don't think there's too much hate for ROMs, but they are illegal and don't give you the full retro experience IMO.

Ask for your second question, I enjoy watching some snes videos but I'd prolly rather just play the game myself.

u/ARKaMAN · 1 pointr/Games

I just use a USB adapter. I think this is the one I got (it was years ago). It works really well, I use it for emulation all the time.

https://www.amazon.com/SNES-Controller-Adapter-USB-Super-NES/dp/B002IXZ5DE

u/loophole64 · 1 pointr/gaming

Nope, I'm talking about the original controllers for the NES and Super Nintendo.
SNES Controller:
http://www.lukiegames.com/snes-original-super-nintendo-controller-used
You'd probably find one cheaper on ebay or craigslist. $16 is totally worth it to me though.
USB Adapter:
https://www.amazon.com/SNES-Controller-Adapter-USB-Super-NES/dp/B002IXZ5DE
I've had a couple different brands of these adapters and this one has held up much better than the others. Also $16 ish.

u/mangopuncher · 1 pointr/gaming

Yeah, I've messed around a lot with trying to come up with the ideal solutions to emulating various systems with optimal input, and blown through a lot of adapters and such. My recommendation is bad boy along with any used Super Famicom controller or SNES controller which at fair market value is less than $10, so you end up paying around $10 less for a better end result.

u/new-user12345 · 1 pointr/RetroPie

SNES Controller to Adapter for PC USB https://www.amazon.com/dp/B002IXZ5DE/ref=cm_sw_r_cp_apip_qOswgC9vqSNfd

other than the issues described in this thread with controllers being assigned a player designation, this thing works great for me.

u/L810C · 1 pointr/hardware

Not much of a help here, but why not just pick up a converter?

http://www.amazon.com/SNES-Controller-Adapter-USB-Super-NES/dp/B002IXZ5DE

u/Bu1ld0g · 1 pointr/PS4

You certainly can, http://www.amazon.com/SNES-Controller-Adapter-USB-Super-NES/dp/B002IXZ5DE

I rewired an original Xbox controller to USB a few years back and it worked a treat

u/greenmky · 1 pointr/gaming

Even better is a NES or SNES controller to USB adapter, and a real controller. Mayflash makes a good adapter, their SNES on on Amazon:

https://www.amazon.com/SNES-Controller-Adapter-PC-USB/dp/B002IXZ5DE

Still have to buy / obtain an OEM controller though that way.

u/asdfqwer426 · 1 pointr/snes

I've got one of these types of controller/USB adapter things for N64 controllers, and am pretty happy with it.

u/DammitChris · 1 pointr/retrogameswap

So worth it. Much better than getting a cheap 3rd party controller. I got this one, and it has two controller ports so I can play Secret of Mana 2 with friends, or just good ole Super Street Fighter II. I'm really really pleased with it. /Endorsement over

u/FlowersOfSin · 1 pointr/funny

Get this.

I plug my laptop in my TV and I wanted to use a real SNES controller and not those cheap knockoffs, and I found this adapter to work very well...

...then I realized that buying 2 SNES controller was pretty much as expensive as buying a SNES with 2 controllers... So I just bought a SNES instead and got myself a few games. The adapter is still very useful with the games that are too expensive for me to hope ever owning.

u/PhonicUK · 1 pointr/raspberry_pi

If it's for SNES/NES exclusively, why not get a SNES style controller?

Or you can buy an adapter to plug SNES controllers in via USB and use original controllers, which are easily enough found on ebay.





u/-Pelvis- · 1 pointr/gaming

SNES USB controller - not currently in stock, and often in this state (immensely popular!)

USB Adapter for original SNES controllers

If you have any third party USB controller, it will work as well, and your could probably get away with using a really crappy one if you're okay with it. I have found the main disadvantage crappy third party controllers to be crappy analog sticks, which you don't even need for SNES.

Consider also that the cartridge itself will cost you at least fifteen bucks anyways, and now you have a bunch of options.

u/this_is_my_trees_alt · 1 pointr/patientgamers

It's definitely worth trying! It's very fun and a very solid game and honestly one of the better puzzle games on the SNES. Make sure to play 1P Vs. mode, that's the equivalent of a "story" mode.

If you're playing on an emulator, I would recommend picking up a SNES USB controller or a USB adapter and an official, used SNES controller. I've had this for 5 or 6 years and it's how I play SNES games on PC.

Oh, Kirby's Avalanche is good too. It's not got the Tetris branding, but it's another puzzle game that got reskinned for western release. In Japan, it was called Super Puyo Puyo, and of course Puyo Puyo is still around as a series, including a recent Tetris mash-up.

u/Kadin2048 · 1 pointr/gadgets

I kinda suspect this thread won't get many more responses, but a cool gadget is a USB interface for your favorite flavor of old-school game controller. Then you can play using the ACTUAL old controllers.

E.g. for SNES: http://www.amazon.com/SNES-Controller-Adapter-USB-Super-NES/dp/B002IXZ5DE

Original NES: http://www.amazon.com/Tomee-NES-Retro-Controller-Adapter-Converter/dp/B00HM3QCN2/

Sega Genesis: http://www.amazon.com/Retro-Bit-Genesis-PC-USB-Cable-Sega/dp/B0080RAT42/

u/Shuliak · 1 pointr/RetroPie

Sorry I'll try to clarify.

I bought 2 usb snes adapters from Amazon: https://www.amazon.ca/dp/B002IXZ5DE/ref=cm_sw_r_other_apa_i_ALIgDbQKDCYX2

Each peripheral can house 2 snes controllers, so by using these I can use 4 snes controllers.

I also have an actual snes multitap, the one that's licensed by Nintendo, so I can plug snes player 1 into the USB adapter, and the snes multitap into port 2 of the USB adapter, however, the multitap doesn't allow me to control players 3-5. It does detect player 2 which is plugged into the multitap, so the multitap appears to work.

u/Bluebeano · 1 pointr/retrogaming

Do you have the space for the consoles? If so, its the best option, if not, then i have a good alternative if you can build a pc. Buy a broken NES or other retro console and gut it, then build a pc inside of it. Put in something like this and some of these and you'll be golden

u/moon_patrol · 1 pointr/snes

I don't know if this could help. I once had a usb adapter and it worked pretty well, but I'm not a high speed player, maybe these controllers add input latency and I just didn't noticed it.

u/resslx · 1 pointr/gaming

They're neither. The controllers were purchased used at a local Vidcycle for $5 each. The adapter was only $9 on amazon, and it has two slots.

Sigh Yes, I should put it on instead. Although, I'm goinng to try MAMEing it first. :D

u/ShimmyZmizz · 1 pointr/gaming

If you're using it for 2D games, I highly recommend an SNES to USB adapter. Super Meat Boy with a SNES controller feels so right.

u/Sociopathic_Thinker · 1 pointr/cade

Yup scratch what I said earlier... I got the numbers confused. I found SNS-102s... and the SNS-005 are the common ones... just reviewed the product page and it all came back... http://www.amazon.com/SNES-Controller-Adapter-USB-Super-NES/dp/B002IXZ5DE/ref=cm_cr_pr_product_top

u/fatguyinSTL · 1 pointr/gaming

I have a lot of great memories playing Megaman X with my uncle when I was younger. I remember making him a popsicle stick trophy after he beat the game.
Worst case scenario if you can't find the games get a USB to SNES adapter for your computer and use an emulator. https://www.amazon.com/SNES-Controller-Adapter-USB-Super-NES/dp/B002IXZ5DE

u/joekimchi · 1 pointr/RetroPie

I have USB controller adapters for NES, SNES, and Genesis (which does Atari style controllers too) and they all work wonderfully.

This is the SNES one I bought
https://www.amazon.com/SNES-Controller-Adapter-USB-Super-NES/dp/B002IXZ5DE

I wouldn't doubt the one you posted works, but obviously I can guarantee anything.

I use this one for Genesis but it's honestly a bit pricy for what it does. You might be able to find something much cheaper that works, but I wanted the extra functionality.
http://www.2600-daptor.com/Vision-daptor.htm

This is the NES one. Works with the advantage too!
https://www.amazon.com/Tomee-NES-Retro-Controller-Adapter-Converter/dp/B00HM3QCN2

Personally, I'd recommend these over the ibuffalo controllers. I haven't had good luck with those. The only issue might be tracking down the controllers but if you're willing to do that I'd go for the adapters. Nothing feels like or beats the actual hardware, IMO.

u/wolf9545 · 0 pointsr/nintendo

http://www.amazon.com/SNES-Controller-Adapter-USB-Super-NES/dp/B002IXZ5DE

What he said. I don't own this one but I have the one that you can connect to your wiimote. That way you are using the original controllers.

u/imisstheyoop · 0 pointsr/gaming

Due to the controller you mean? I think you can buy controller adapters online for super cheap. For example: https://www.amazon.com/SNES-Controller-Adapter-USB-Super-NES/dp/B002IXZ5DE

u/Hexxas · -1 pointsr/Games

You can find a lot of cool things on the internet.

u/InfiniteKarmaTrain · -5 pointsr/DIY

I came here hoping for great things and was disappointed. A RPi / Beagle Bone / Chip would've probably worked better in this case. But disgrearding the choice of computer for the insides you did the one thing everyone does.

Change the controller ports to USB ports. It always looks horrid. No matter how well done it doesn't fit in.

Something like this with a bit of soldering would've looked a million times better

Still, the biggest sin you committed was killing of a SNES.