#721 in Industrial & Scientific
Use arrows to jump to the previous/next product
Reddit mentions of TapeCase TC790 Dry Vinyl Tape - 1 in. x 100 ft. Black Chrome Plating Tape Roll with High Conformability. Adhesive Tapes
Sentiment score: 2
Reddit mentions: 6
We found 6 Reddit mentions of TapeCase TC790 Dry Vinyl Tape - 1 in. x 100 ft. Black Chrome Plating Tape Roll with High Conformability. Adhesive Tapes. Here are the top ones.
or
Adhesion Tape: this plating masking tape is a stabilized product that has been manufactured using plasticized polyvinyl chloride filmUsage: when wrapped spirally, this bonding tape will adhere firmly on the surface. Ensuring flexibility and conformability, the tape is well-suited for heavy-duty chrome plating as well as anodizing usageChrome Plating Tape: free from lead and recyclable, this adhesive tape is not going to contaminate solutionsApplications: as the vinyl tape operates at maximum 185 deg. F (85 deg. C) temperature, it can be reliably used in the automotive industry for wrapping wiring harnesses neatly. It is also useful in sandblast tasks wherein sticky residue is undesiredSpecifications: the recyclable tape roll measures 1 in. in width and 100 ft. in length
Specs:
| Color | Black |
| Height | 1 Inches |
| Length | 2.7 Inches |
| Number of items | 1 |
| Weight | 0.0661386786 Pounds |
| Width | 3.2 Inches |
Great list! Adding QOL/bling improvements to games is definitely one of my favorite aspects of the hobby.
Some of my personal favorite add-ons:
> Splice them into your trailer wiring
That's what I did. I went up about 4" from the 7-pin plug, cut the necessary wires, used uninsulated butt connectors with a closed-barrel crimper and adhesive-lined heat shrink to splice in a 6-pin Deutsch DT connector pigtail, then built my own wiring harness that plugs into the Deutsch connector and ran it up to the headache rack.
Went with the 6-pin Deutsch connector since I only needed 5 of the 7 wires (LT, RT, Tail, Backup, and Ground) and 5-pin Deutsch connectors aren't available. Deutsch DT connectors are frequently used in the automotive aftermarket (probably more so than Delphi Weatherpack connectors). I know Rigid Industries uses them for their LED lights, and Smith Race Wire uses them for parts of their custom wiring harnesses.
Also, since you can only close-barrel crimp one end of the uninsulated butt connectors, I chose to close-barrel crimp the side that had only one wire (since closed-barrel crimping is more secure, and the one wire was looser in the connector) and used Channel Lock 909 Pliers to crimp the end with two wires.
Once you made your harness, make sure you slip it into some split wiring loom. Using a loom insertion tool makes quick work of that. Wrap the wiring loom with non-adhesive dry vinyl tape for a factory-finished look and to avoid a gooey, sticky mess in case you need to unwrap the wiring harness in the future.
Finally, a good wire stripper will save your hands a lot of fatigue compared to using a standard wire stripper that you have to always pull the wire through.
Not sure what it is called, in faders I think it's a little more robust, probably silicone rubber. But most electrical tape is dielectric vinyl, which would probably work fine. Just search for some non-adhesive vinyl or cotton tape, (sometimes called "wiring harness tape"). Here's some "dry vinyl" tape on amazon.
I don't reuse it but here ya go...
TapeCase TC790 Dry Vinyl 1" x 100ft Black (1 Roll) https://www.amazon.com/dp/B00823GUP6/ref=cm_sw_r_cp_apa_AwrPAbK7DYJ7S
Sticks to itself but nothing else. Cheap, quick and comes in different widths.
do yourself a favor and use a self sealing tape or dry vinyl tape. It's cheap, and won't turn into a mess like electrical tape will on a harness.
https://www.amazon.com/gp/product/B00823GUP6/
"Bondage Tape" is just dry vinyl tape,which is used for wire harnesses and, as someone else said, plumbing stuff. You can order it lots of different widths
https://www.amazon.com/gp/product/B00823GUP6/ref=oh_aui_detailpage_o03_s02?ie=UTF8&psc=1