#1 in Combination wrenches
Reddit mentions of TEKTON Combination Wrench Set, 15-Piece (8-22 mm) - Holder | 18792
Sentiment score: 3
Reddit mentions: 4
We found 4 Reddit mentions of TEKTON Combination Wrench Set, 15-Piece (8-22 mm) - Holder | 18792. Here are the top ones.
or
- Includes 15-pc. combination wrenches: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 mm; Wrench holder
- Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces
- 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers
- Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off
- Made of premium chrome vanadium steel with a mirror chrome finish
Features:
Specs:
| Color | 0 |
| Height | 1.9 Inches |
| Length | 13.6 Inches |
| Number of items | 1 |
| Size | 15-Piece (8-22 mm) |
| Weight | 5.16 Pounds |
| Width | 11.6 Inches |
Checkout Tekton, can get all their stuff on Amazon and I've been very pleased with the stuff I have from them. Best part is for the most part they don't skip sizes in their sets like other cheap stuff.
Check out, TEKTON Combination Wrench Set with Store and Go Keeper, Metric, 8 mm - 22 mm, 15-Piece | 18792 https://www.amazon.com/dp/B00OZJN3PQ/ref=cm_sw_r_cp_apa_YfpWAbSSBGA74
I have this set and a couple others. They have been awesome.
Craftsman is junk; Husky is decent; Snap On is overpriced.
I re-tooled last summer from my old Williams set. Here's what I wound up with:
-Snap On GF80: 3/8" drive ratchet, got it off ebay for $50. I probably wouldn't buy again, but it is very nice.
-Pittsburgh Pro extendable 1/2" drive and flex-head 1/4" ratchets: Less than $20 each, and they are 90% as good as the Snap On. I would probably buy the 3/8" instead of the Snap On, if I had to do it over again.
-Pittsburgh Pro 1/2" drive impact sockets: These boys have taken some abuse at this point, and other than the etching having been stripped off of a couple (see abuse above), they are still in great shape. $25 for shallow, $32 for deep, Metric or SAE.
-GearWrench 3/8" drive impact sockets: $60 for a pretty complete (8mm-19mm + 21mm, 5/16"-3/4") set, and they are very thin-walled so you don't really need chrome.
-Pittsburgh Pro 3/8" chrome (shallow only): $9/set for 12-point sockets, which is the only reason I got them.
-Pittsburgh Pro 1/4" chrome sockets, shallow and deep: Overpriced, really, but I got the color-coordinated ones which are pretty cool. I might go for a cheaper set if I had to do it again. $8-9/set.
-GearWrench Long Pattern Wrench Set: I got the 22-piece Metric set (6mm-32mm with some skips) for $97; I haven't bothered to get the SAE set, I just have a handful of Pittsburgh SAE wrenches on a wrench ring.
And a big rally box to put it all in. I bet you could get all of it for under $500 if you use coupons at Harbor Freight and shop around for the GearWrench stuff.
-------------------------------------------------------------
I also got a DeWalt cased set to keep in my trunk:
https://www.homedepot.com/p/DEWALT-1-4-in-x-3-8-in-Drive-Polished-Chrome-Mechanics-Tool-Set-200-Piece-DWMT75000/206510555
But I had to add some wrenches (it has 10mm, 11mm, 13mm and 14mm; wtf?!) to my trunk bag to make it "complete," and even then it has some oddness to it (3/8" drive starts at 14mm, so you'd better not have any really tight 12mm bolts...) so it might not be what you are looking for, but they make a few different sets.
----------------------------------------------------
Other things I considered:
https://www.amazon.com/Williams-50614-2-Inch-Socket-146-Piece/dp/B00HR1Q5F4
$320 for a complete Williams socket set, but the wrenches are about the same...
---------
This might be the "bang for the buck" winner, simply for the completeness of the socket sets:
https://www.amazon.com/dp/B01LYZ2IJ5
https://www.amazon.com/dp/B01MDO6L90
https://www.amazon.com/dp/B00OZJN3PQ
$270 ($180 for 1/2", $88 for 1/4" and 3/8") for a staggeringly complete set (10mm-32mm in 1/2" drive, shallow and deep, with no skips!) and then $42/set for the wrenches, 8mm-22mm.
---------
https://www.amazon.com/KD-Tools-KDT-80942-239-Piece/dp/B00OL2XFLO
GearWrench socket, wrench and allen key set, $210 for a whole bunch of tools, although they aren't the high-tooth-count ratchets.
--------
https://www.harborfreight.com/hand-tools/hand-tool-sets/301-pc-mechanics-tool-set-63464.html
Then there's this thing. It is actually quite well reviewed, and surprisingly complete on the socket side, if a little short on wrenches. It's usually on sale for $160.
---------
https://www.amazon.com/dp/B0056E11QW
https://www.amazon.com/dp/B00BT0AYG0
...and then there's the dream: If I could get away with having this stripped-down of a set... $600 for a very nice, but fairly bare-bones set. No deep-well, no 3/8" drive at all (hello, super-tight 12mm bolts!), and only great big long extensions... if you never need to get into really tight spaces, maybe. The 3/8" drive set is another $260 on top of this, and still doesn't have short extensions or deep-well sockets.
For 3/8 impact sockets go with the Sunex 3342 master set. It has both SAE and Metric and comes with both short and deep well for $68 and they're made from Cr-Mo instead of Cr-V like the Tekton ones are.
Edit: For wrenches check out the Tekton 18772 and 18792 sets, I own both of these sets and like them a lot and just now noticed that they're on sale right now.
Gearwrench. https://www.amazon.com/GearWrench-81919-44-Piece-Non-Ratcheting-Combination/dp/B00H2W7LVK/ref=sr_1_24?s=power-hand-tools&ie=UTF8&qid=1540036597&sr=1-24&keywords=wrench+set
Tekton. https://www.amazon.com/TEKTON-Combination-Wrench-Keeper-Metric/dp/B00OZJN3PQ/ref=sr_1_5?s=power-hand-tools&ie=UTF8&qid=1540036468&sr=1-5&keywords=wrench+set&dpID=51%252BDoXrWhZL&preST=_SY300_QL70_&dpSrc=srch
I don't like a raised panel wrench. You could also keep an eye out for craigslist snap ons or Mac.