Reddit mentions: The best screwdriver bits

We found 240 Reddit comments discussing the best screwdriver bits. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 117 products and ranked them based on the amount of positive reactions they received. Here are the top 20.

6. 6 Piece Torx Insert Bit Set - T5 - T10 x 25mm

    Features:
  • Package Dimensions: 2.794 cms (L) x 5.08 cms (W) x 10.16 cms (H)
  • Product Type: Fastener Drive Bit
  • Package Quantity: 1
  • Country Of Origin: China
6 Piece Torx Insert Bit Set - T5 - T10 x 25mm
Specs:
ColorOriginal Version
Height3.8 Inches
Length0.8 Inches
Number of items1
SizeOriginal version
Weight0.01 Pounds
Width2 Inches
▼ Read Reddit mentions

9. Wiha 28103 Magnetic 1/4 Bit Holder, Stubby, 57mm

    Features:
  • Stubby 3/4" Long Shaft
  • 2.5" Over All Length
  • 1/4" Magnetic Bit Holder
  • For Working in Confined Spaces
Wiha 28103 Magnetic 1/4 Bit Holder, Stubby, 57mm
Specs:
ColorOriginal version
Height1 Inches
Length1 Inches
Number of items1
SizeOriginal version
Weight0.000625 Pounds
Width1 Inches
▼ Read Reddit mentions

10. set

set
Specs:
Height0.1 Inches
Length1.1 Inches
Weight0.02 Pounds
Width0.12 Inches
▼ Read Reddit mentions

20. Bit-Schlüssel, Bithalter + 6 Bits

Bit-Schlüssel, Bithalter + 6 Bits
Specs:
Height5.118110231 Inches
Length1.181102361 Inches
Weight0.0220462262 Pounds
Width1.181102361 Inches
▼ Read Reddit mentions

🎓 Reddit experts on screwdriver bits

The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where screwdriver bits are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Total score: 12
Number of comments: 2
Relevant subreddits: 1
Total score: 9
Number of comments: 2
Relevant subreddits: 1
Total score: 7
Number of comments: 4
Relevant subreddits: 1
Total score: 7
Number of comments: 3
Relevant subreddits: 1
Total score: 6
Number of comments: 4
Relevant subreddits: 2
Total score: 6
Number of comments: 2
Relevant subreddits: 1
Total score: 5
Number of comments: 2
Relevant subreddits: 1
Total score: 4
Number of comments: 3
Relevant subreddits: 1
Total score: 4
Number of comments: 2
Relevant subreddits: 1
Total score: 2
Number of comments: 2
Relevant subreddits: 1

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Top Reddit comments about Screwdriver Bits:

u/captdimitri · 14 pointsr/lockpicking

I assume that you've already made yourself familiar with any local licensing, bonding, and locksmithing laws in your area. Do that first.

Where are you located? If you're on the west coast, I recommend KDL Hardware and Clark Security for wholesalers.

As far as equipment for basic locksmith work goes, I'd have the following in my vehicle:

  • inverter (duh)
  • duplicator

  • HPC Blitz. It's a bit spendy for starting "small," but with one of these puppies you'll be much more versatile. You can cut keys, develop master key systems, expand into automotive work, make bump keys on the spot, decode keys, and much more. If you do your business right, you'll get a larger variety of work, and make your money back on it right quick. Try buying a used one, they are low maintenance, and easy to keep in top condition.
  • Basic automotive lockout kit. While we're talking about expanding into automotive work, if you don't want to buy a Blitz, at least get one of these. The cost to buy one is silly compared to how much work you can do with it.
  • Last automotive thing: get a pair of Autosmart reference books. They'll tell you everything you need to know for making keys for any kind of vehicle. Code programs on a laptop like Codesource (Comes with a brand-new Blitz,) and Genericode will make automotive work a breeze as well.
  • Invest in a factory standard Schlage and standard Kiwkset pin kit from LAB. These two kits will pin up 90% of all the locks you'll come across in residential work. For everything else, get a .003" universal pin kit. You'll find yourself cursing the universe if you get a .005" one.
  • Hand tools are a no-brainer, and are usually up to the individual for what exactly to get, but there's a few good ones to have for our trade: Chisels (for making strike alignment adjustments), high-quality swiss files, dial calipers, deadblow mallet, security screw bit drivers, and allen wrenches to name just a few.
  • Headlight, and magnifiers.
  • For lockouts, have a selection of bump keys, a couple picks and tension wrenches, (You really don't need more than 4 or 5, any more and you're overcompensating. Promise.) and you should be good. There's more specific tools for certain common brands of locksets, but you'll collect those as you go. I also hang on to my old credit cards for loiding knob latches open.
  • For making keys from scratch, a locksmith's otoscope is indispensable.
  • Get a power drill, and invest in some high-quality bits. This will be used for installing locksets, making strike adjustments, drilling out high-security (or impossible-to-pick, they exist!) locks, safework when you get to it, and much more. If you get a cordless one, be sure to have at least 18v or higher, and you can eventually get a cordless circular saw (for cutting kryptonite U-locks, and much more,) of the same brand that will use the same battery. Useful.
  • A Dremel. If you don't have a dremel in your toolset, you're doing it wrong. You can ignore everything I just said, but for the love of fuck get a Dremel. It's your go-to, do-everything, metal-shaping, save-your-life-at-4AM best fucking friend. I can't stress enough how much money and time I've saved by simply having a little creativity, a steady hand, and my trusty Dremel.
  • Having an inventory of the most common keyblanks, locksets, deadbolts, and padlocks will save your butt, and provide solutions for your customers quickly.
  • Grab a bench vice, too. Very handy for making repairs.
  • Sharpie. Just trust me on this one.

    When looking to buy cheap tools from low-quality manufacturers, I follow two rules: never buy anything cheap that cuts, and never skimp on anything that's electric. Everything else can be cheap as shit. Go nuts.

    Join ALOA and/or a local locksmithing association. If you're in the pacific northwest, I recommend the PLA. Being a part of a locksmithing organization has the benefits of looking good to your customers, of course, but the major benefit is the educational opportunities through classes and a pool of friendlies to ask questions to. Never stop studying. Joining these groups will open doors that will put you above the rest of your competition. ALOA membership alone will give you access to a whole online repository of information, a library, and information on classes being held near you. It will pay off tenfold.

    Get familiar with the locksmiths in your area, and try and establish a relationship with one or two. Let them know that you plan on starting a business, and are more than happy to give work that you're not confident taking on to them in exchange for borrowing tools or blanks that you may need in a pinch. This can be hard, depending on the locksmith, and some will be outright rude. But there's bound to be someone willing to be your colleague. When you leave town for a vacation or want to take a break for a couple days, these allies will be more than happy to cover your phone line while you recuperate, giving you a percentage of the profits, of course.

    That said, DON'T do work that you're not confident in your abilities to handle. You are dealing with people's security, and you do not want to be liable for any breaches in people's peace of mind. This will ruin you. Regardless, you will make mistakes. Just take it on the chin, don't make excuses, and learn from it.

    Always answer the phone. Call back missed calls. Be very aware of burning yourself out. If you're a one-man operation, and you start getting more business, keep the energy up. Make yourself available 24/7 and keep in mind how much of a badass you are. Just "letting a call go here and there" can be a slippery slope. Be self-motivated. Don't get trashed on nights that you're expecting work.

    One last thing, for customers that are super impressed with your work, encourage them to leave a good review on google and other listing sites for you. A large majority of your customers will find you on the internet, and if you are the first hit with tons of good reviews when searching "locksmith in [subject hometown here]," you will have a huge upper-hand over locksmiths that have been in the business for 15 years, who rely on the yellow pages still. Put instructions for how to leave a review on the back of your business cards, or invoices, for the computer-illiterate.

    Have fun, my friend. It's a wonderful field, and you'll meet lots of new people. Good luck, and don't be a dick.
u/kiweegie · 1 pointr/Tools

I've been doing something similar to yourself though less in a consolidating manner than just upgrading my tools. I have a lot of Wera kit and can't say enough good about them though I've heard equally good things about Wiha and others.

On the multi side, something like this kit might suit you.

I have this kit which has the same small driver handle but a selection of regular short bits. It has the added benefit of a small but strong and very well made ratchet handle and sockets. If you need something along those lines as well the extra cost is worth spending.

As for regular screwdrivers I have this set but you may find their regular non-insulated ones cheaper.

The blades are top notch and the handles I find very comfortable in the hand. Everyones different though so you're probably best to try some out in a shop somewhere if you can get hold of them.

u/bob_cock · 4 pointsr/Tools

GearWrench 35pc micro driver set I have one of these and it comes in handy all the time. I'm a professional mechanic and this kit always comes with me on service calls.

or

Wera Tool-Check Plus Bit Ratchet Set with Sockets - Imperial Basically a fancier more indepth version of the GearWrench set. I don't own one, but its on my list and would likely replace the GW set at work. I'd bring the GW set home.

or

Knipex Alligator Plier Set What can be said, Knipex makes the best pliers. You can grab hex heads, turn pipe as it grips like a mother, and any other thing your sweet little heart desires.

or

If you want to save up a little more cash, these Knipex Plier Wrenches are awesome or so I've heard Also on my list of stuff to get. These play a similar role as adjustable wrenches.

u/thefeegle · 3 pointsr/knives

> Can you recommend it for truly carrying it every day?

Yes, I truly EDC mine, it's seldom not in my pocket. I can recommend it as a smaller MT for EDC. I've looked at the Skeletools in the local shop, but they don't really do it for me, as they offer nothing over my Juice.

Mine is a C2, because I have other EDC scissor or saw options, and I carry a wee Victorinox spectacle screwdriver in the corkscrew for my shades/specs etc. My missus is a bit of a wino, so the CS is handy for her, and its actually a good CS with a nice lever action from the cap lifter. The C2 is comparable in size to a two layer SAK like a Climber etc. Closed length is only 8.3 cm vs a 9 cm SAK so it punches way above its (light) weight for usefulness and portability. It's UK legal carry at the moment, if that bothers you.....

In-pocket EDC is comfortable to the point you hardly notice it's there, I use a pocket dangler clip. It doesn't disappear inside your pocket and get scored by coins etc. I'm not big on belt carrying this sort of thing.

If you need more driver options, the bit adapter with the square hole will fit the Juice Philips driver,

https://www.amazon.co.uk/Leatherman-Driver-Blast-Fuse-Kick/dp/B000PS4XQY/ref=sr_1_1?ie=UTF8&qid=1522407665&sr=8-1&keywords=leatherman+bit+driver

I prefer the little hex wrench that came with my Vic tool. You can buy these separately.

https://www.amazon.co.uk/Victorinox-Bitwrench-Case-Bits-Swiss/dp/B0001P14NG/ref=pd_sbs_200_1?_encoding=UTF8&psc=1&refRID=3HEG995RK04478EHAS9C

Leatherman quality is fine, and their warranty is great as I can attest due to them replacing a micra for me a few years back. There is a place in the Lake District you send the damaged tool to and they will replace it for you.

Only other competition I have seen in this size is the Stanley MT, but the quality of these is not that great, better than you'd expect for a tenner, its bigger and more awkward for pockets than the Juice.

Gerber might do something in a similar size, but again, I don't think the quality on Gerber is all that great, purely based on my experiences with a Dime.

That leaves SOG, and I've never had a SOG in my hands so can't say.


u/jda404 · 114 pointsr/PS4

It's not a standard screwdriver, you'll need a torx TR9 security screwdriver I believe, they are cheap. I have heard of people using small flat heads and having success but for best and easiest results get the torx. I clean my PS4 every 6 months it's a launch day console and still pretty quiet.

I bought this set for 15 bucks a few years ago love it comes in handy for electronics and small screws Amazon link.

u/ThePiratesPeople · 1 pointr/ffxiv

It may need cleaning, or if it’s a pro and has reflective surfaces enabled (I think that’s the setting) or other Pro settings turned on it can add some more strain initially loading things in.

Mine was doing the same, clleaning out the PS4 of all the dust helped tremendously. It still gets somewhat loud, but not nearly so bad, with the Pro settings enabled at first, but then dies down.

To clean it you need some tools. These are what I used. ORIA Screwdriver Set, Magnetic... https://www.amazon.com/dp/B01E16J6RQ?ref=ppx_pop_mob_ap_share

Also I really recommend not just stopping at cleaning the fan, but getting all the way down to the heat sink. That can get clogged really badly with dust. I never thought about it until my PS4 kept shutting off due to overheating when playing God of War and the new Spider-Man. Once I got the heat sink cleaned I saw a ton of improvement and it stopped shutting down. Now I just make sure to clean it every 4-6 months and keep the side vents well dusted every week.

Hope that helps. :)

u/bolts-n-bytes · 1 pointr/Knife_Swap

Sure thing! I’m happy to help! Of course, these are my opinions and experience. Some say “learn to freehand sharpen!” But that’s rough starting out and takes a long time depending if you have a knack for it. It’s easy to do well for 10 minutes, then screw up for 10 seconds and nullify all the progress you’d made. Stropping has made me get a little better feel for what freehanding would be like. When you strop, you want to be at a little less than the angle of the edge. Too shallow and you’re not honing the apex. Too steep and you’re rounding off the apex. Strop away not towards the edge, but to find the right angle see where the edge starts to bite the leather and decrease the angle a bit - that’s the right angle.

Yeah, I’d say either get that $5 oil I linked or just use the KPL. I agree about food - as long as you’re not over applying the oil, it’ll probably never get near or into the food.

If you get a strop and a lanksy turnbox, you’d be $35-40 invested and could go a long way.

Oh, and you also need a screwdriver kit if you don’t have one - more specifically, torque bits. Nick shabazz’s teardown videos have helped me many times. I really like this one for the price:
ORIA Precision Screwdriver Kit, 60 in 1 with 56 Bits Screwdriver Set, Magnetic Driver Kit with Flexible Shaft, Extension Rod for Mobile Phone, Smartphone, Game Console, Tablet, PC, Blue https://www.amazon.com/dp/B01E16J6RQ/ref=cm_sw_r_cp_api_i_pEjlDbHEPSHKV

u/so_banned · 3 pointsr/CasualConversation

Of course. Glad to do it. If you follow some basic instructions it can be VERY VERY easy. The big stuff you will need:

  1. a set of precision tools to unscrew small screws. this one is great--and cheap at $14--and has gently magnetized heads so that when you unscrew a tiny screw, it will stick on and you won't drop it inside your computer.

  2. static bracelet. Get one here for $5. you will connect this to a suitable ground and it will prevent you from accidentally discharging static electricity to the inside of your machine.

  3. YOUR specific components. For a laptop, you will likely need a 2.5" sized SSD (solid state drive). Here's a good sized one (480GB) on amazon for $50.00.

  4. A guide for taking parts out of YOUR specific computer. If you tell me the make and model of your machine, I'd be happy to find a tutorial that shows the correct process.

    most of the time HDD replacement is fairly easy. you usually just open a compartment, unplug some wires, unscrew some screws and then do the same steps in reverse order to complete the upgrade.

    The parts AND tools listed above come to about $70 plus tax for a brand new SUPERFAST hard drive. If you wanted to do a RAM upgrade at the same time, I would estimate that to be around a $60 cost, putting your TOTAL ALL IN COST at $130, down from $400 lol.

    You can do it!!


    and feel free to ask any questions you like.

u/beddahwithcheddah · 5 pointsr/AskWomen
  • Tape: scotch, packing, duct, and masking
  • Scissors: Ones that actually work
  • Utility knife
  • Sponges and dish scrubbers + dish detergent
  • Bottle brush
  • Toilet brush/wand
  • Broom/Roomba
  • Mop/scooba
  • Vaccuum cleaner if you have carpet
  • Do you use kitchen paper towels? A kitchen towel holder is always nice, but not necessary.
  • Tissues for your nose
  • I like having a shoe rack or hanging shoe holder. If you're a guy, stick to the rack b/c your shoes will fit better.
  • Small kitchen fire extinguisher: your apt probably has one, but if it doesn't, get one
  • Bathroom caddy: http://amzn.com/B0014X7ARI
  • Organizers: I like my kitchen to be wicked organized. I use 1 organizer for my pots, 1 for my pot lids, 1 for my dishes, 1 for my mugs, and 1 for my flat pans/cutting boards.
  • Coffee maker
  • Kettle
  • Electric drill - DIY stuff is so much easier with an electric drill. Also, this accessory: http://amzn.com/B00355GLBY - a must for DIY furniture.
  • Lightbulbs
  • Turn on your electricity and other utils 1 day before you move if you can, or you'll be moving the dark
  • Have you researched your cable/internet options?
  • 1 nice flashlight
  • Ice melt
  • A few stamps + envelopes
  • Quarters in the "quarter jar" if you have to use coin-op laundry
  • At least one extension cord
  • At least one multi-plug outlet. I like the squid style ones.
  • Laundry baskets. I prefer to have two - it buys you a little time.
  • 1 magic marker
  • 1 message board with mail caddy - a nice to have
  • Fridge magnets. I use 1 strand of the curiously strong ones, and that's all I need. Those suckers really stick.
  • Moveall or furniture sliders - a godsend if you live alone. You put them under the "feet" of your furniture and you can push your furniture around with ease.

    That's what I can think of now. You can get a LOT of this stuff on craigslist for low cost.
u/SergeantFTC · 1 pointr/Dell

Just did this a couple of days ago. See this thread for the parts you'll need to buy. I might try to find a slimmer rubber bumper though, it's way too thick to fit in the cage without shaving a lot of it off somehow. You should have something there though.

Even though that cable said it was shipping from China, it actually shipped from CA, and came much sooner than expected. YMMV. There are other places to buy it, just look for the right model number.

I didn't bother with an antistatic mat. As long as you do the work standing on a hard surface instead of carpet and you touch something grounded occasionally, you'll probably fine. YMMV, do your own research on this.

I've stripped 2 Torx T5 bits opening this laptop. Don't cheap out here. I ended up going with these. The T5 bit has been fine so far, though it has twisted a little bit.

When you're opening the laptop, don't forget the two phillips head screws under the flap. Be careful as you pry the bottom off, there are plastic clips that you can break off (don't worry if they do though, you've still got 12 screws to hold it together).

You'll need to fully unscrew and remove the battery, since the hard drive connector on the motherboard is underneath. The hard drive connector gets pressed directly onto the motherboard, and I believe the spot for it is labelled.

Make sure you review the excellent service manual beforehand, and have it available as you work. It has steps to walk you through much of the process.

This may not be a video tutorial, but you really don't need one. By far the hardest part for me was wrangling the rubber pieces into something that would fit, keep the drive snug, and not bend the drive cage. I would recommend buying extra bumpers in case you mess up like I did, and try to slowly shave away the part that's too thick with an x-acto knife.

Good luck, and PM me if you need any additional help!

u/AbysmalVixen · 1 pointr/pcmasterrace

Looks good but since you’ll be doing lots of processing I’d go with a ryzen 2700 build as it’s got better multi core performance and it comes with its own really good cooler. Also I’d just go down to Lowe’s or home depot and get you a good screwdriver and some philips Head bits for under 20 bucks instead of spending so much on an ifixit kit.

If you insist on getting a screwdriver kit, I’d go with ORIA Precision Screwdriver Set, 60 in 1 Magnetic Driver Kit as it’s got better grip, more bits, it extends and retracts, and costs a fraction of the prices.

You also probably don’t need That much wattage on your psu

u/Warskull · 1 pointr/NintendoSwitch

The cheap options, should be good enough for a Pro Controller.

The good option. Probably overkill for just the controller, but this thing is amazing for general use. It has bits very few kits do. The screwdriver is fantastic.
If you do other sorts of electronics stuff I highly recommend this kit.

u/heyyoguy · 53 pointsr/PS4

I had success using the guide referenced here by u/BooB398, but honestly the majority of the dust buildup was along the side vents which I cleaned with Q-tips and did not require any disassembly. Also make sure you get the TR9 Torx Security bit if you are going to get in there (I ordered a kit on Amazon for like 14 bucks https://www.amazon.com/gp/product/B01E16J6RQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1)

u/bizzy11 · 1 pointr/sffpc

As far as tools and such, you'll need a splitter cable for the fans (which should be included with the Noctua fans) as well as this: https://www.amazon.com/GELID-SOLUTIONS-PWM-Adapter-Cooler/dp/B005ZKZEQA

That adapter is to connect the bottom mounted fans to the gpu, so you can control the fan speeds using MSI afterburner (overclocking/fan profile program). Besides that, just a screwdriver, microfiber cloth, 99% isopropyl, and these pads if you decide to go the Accelero route: https://www.amazon.com/gp/product/B00UYTTLI4/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

You should also invest in a screwdriver set with small bits, as some of the screws will strip if you try to use too big of a bit. Something like this should be ok: https://www.amazon.com/ORIA-Screwdriver-Professional-Precision-Smartphone/dp/B01E16J6RQ/ref=sr_1_3?keywords=electronics+screwdriver+set&qid=1555887517&s=electronics&sr=1-3

The isopropyl and microfiber cloths are to wipe the cpu/gpu before applying thermal paste to ensure a completely clean surface, as well as clean up already applied thermal paste. DO NOT use paper towels as they will leave residue on the cpu/gpu.

All the things you mentioned about watercooling are why I didn't go that route. Not only maintenance concerns, but if something is installed improperly, you run the risk of destroying your components. It just takes one mistake or loose fitting to potentially destroy everything. Not to scare you from trying it or anything, but that was always a risk I wasn't willing to take.

I have my rear fan mounted to the case as intake, with the U9S blowing air toward the front of the case. I know it sounds stupid to vent hot air into the case, but this is how I get the best temps out of my setup. You might be better off aiming it upward, but I didn't want the bottom fans to be completely starved of air, so I put another 120mm intake fan on the front part of the side bracket to help cool the air coming from the cpu.

I also had the same concerns as you about the feet, and after several days of using the stock feet, I noticed how hot the table was getting underneath the case. I bought some custom feet from here: https://mnpctech.com/ncase-m1-mods/ncase-m1-black-silver-replace-feet/

They are a bit pricey, but I've heard of people buying feet meant for speaker amps that will work as well. They just need to use M3 screws to fit into the stock feet holes on the M1.

Edit: for the second fan, you would mount one on the back of the M1, directly to the case. The second fan would be mounted directly on the cpu heatsink, above the ram. If you're dead set on having that ram, you can always mount the fan a little higher so it clears the ram. Shouldn't be a big deal. If you plan on pointing the U9S toward the top of the case, then it doesn't matter what ram you have.

Edit2: wow thanks for the gold!

u/Boodieboo · 2 pointsr/buildapcsales

I have this, the ifixit and another one from ORIA that was on sale a few days ago (https://www.amazon.com/ORIA-Screwdriver-Professional-Precision-Smartphone/dp/B01E16J6RQ/ref=sr_1_7?ie=UTF8&qid=1541607353&sr=8-7&keywords=computer+tool+kit).

​

If you want to buy this one and have it as a backup or keep it at a secondary area like your car, home or work, its a great deal. But if you want one that you want to use as your main toolkit, go with the Ifixit. I had this one and the ORIA one I sent the link of first, and they were great. But once I tried the ifixit, I was more than pleased.

u/spicy_indian · 2 pointsr/buildapc

I've used this cheap kit from amazon to put together a few PCs, do some laptop repair, and pretty much any thing else that didn't require insulated tools or a drill. The bits didn't snap the moment I misused them, so the quality is decent. The included hex/socket(?) is also great for putting in standoffs. The handle leaves a bit to be desired in ergonomics, but you could always buy a more comfortable handle - these bits are a standard size.

edit: fixed link to make automod happy

u/stiffmanoz · 1 pointr/Tools

I do like the sound of adding some more Vessel tools to the kit. I think I have a mild screwdriver addiction at the moment. lol. Half the hex bits in the kit are actually Vessel bits.

I'm actually thinking of adding something like the Wera mini bit screwdriver, with some long reaching bits that could hopefully take the place of the Klein on the side.

https://www.amazon.com.au/Wera-05051274001-Bit-holder-4x78mm/dp/B01H88FO8O/ref=sr_1_142?keywords=wera&qid=1567550089&s=gateway&sr=8-142

The Klein works great, but I'm trying as best I can to make things as functional as possible, without having extra tools in there.

u/lastwraith · 2 pointsr/techsupport

\^ This.

I hate when people say things like what I am about to say but in this case it is true.
If you don't even have the tools to open the drive, this is not the project for you. Opening a hard drive yourself to recover data is a really terrible idea when you are talking about exposing the platters. There is a reason data recovery is so expensive and it isn't just because they have high profit margins.

In the event that there isn't any data on there that you care about and you want to give it a go as an academic exercise....that is a horse of a different color.
A T9 is actually pretty big. In my bag with me I have a kit that includes a T3 through T8 and it wouldn't surprise me at all if your drive required something in that range.
If you live near a Micro Center you can pick up something like this kit. It is quite usable.
http://www.microcenter.com/product/441261/54_bit_driver_kit
I actually have the Inland "ufixit" generic version from Micro for under $20 and it's really handy.
http://www.microcenter.com/product/486365/uFixit_Bit_Driver_Kit_-_54_Pieces

If you don't have a Micro Center nearby, try something like this on Amazon?
https://www.amazon.com/ORIA-Screwdriver-Professional-Precision-Smartphone/dp/B01E16J6RQ

u/PhysicsDude55 · 1 pointr/Tools

I'm a big fan of using 3" long bits. the shorter 1" long bits just don't fit in a lot of electronics and such.


Depending on your budget the 3" Wiha "power bits" are excellent. There are a bunch of cheap chinese made kits too which work fine.
I really like using this small Wera bit holding handle for electronics work. It works really well with 3" bits.


I also like this Wera bit holding screwdriver which is a little bigger (size of an average screwdriver) for regular work.

u/Istartedthewar · 3 pointsr/PSP

If you do electronics stuff fairly regularly, I'd recommend one of the ifixit kits. They're kinda pricy but really high quality bits.


You can get cheaper ones that are still pretty good like this screwdriver kit for $15, https://www.amazon.com/ORIA-Screwdriver-Professional-Precision-Smartphone/dp/B01E16J6RQ/ref=sr_1_4?ie=UTF8&qid=1525454044&sr=8-4&keywords=Screwdriver+kit

Or if you want one with every little tool you could ever possibly need this is a good deal for $35. https://www.amazon.com/ORIA-Precision-Screwdriver-Magnetic-Electronics/dp/B06Y2N568J/ref=sr_1_2_sspa?ie=UTF8&qid=1525454044&sr=8-2-spons&keywords=Screwdriver+kit&psc=1&smid=A2FOADTO08BQD0

Just don't get one of the sub $10 kits that come with all sorts of extra junk, those bits and tools are really low quality in my experience.

u/ParksVSII · 10 pointsr/Plumbing

Looks like a good kit to me! Do you have a pipe reamer? Thumbs up for having a tick tester, too. One thing I added to my kit recently was the Wera Tool Check Plus (this guy I got mine on sale for like $50-60CAD. I have the same impact and it’s handier’n frig for working on shit in tight spots and you can do quite a bit with it and the bit holder and bits work great in the M12 impact.

Oh, and ditching the crimpers for an M12 propex expander would be a good move 😉

u/nhluhr · 6 pointsr/bicycling

OP, go ahead and treat yourself to a screw starter which is a cheap but wonderful tool to help you insert and start threading nipples during lacing.

u/yeahyeahivegotthis · 1 pointr/ave

OP, if you are in the market for a precision set, these $15 sets are pretty nice. On par with the older iFixit kit sets, way better than their current stuff. Buddy and I have the same set, seem to be hard-wearing tips and includes your #2 Phillips.

Syntus 63 in 1 Precision Screwdriver Set with 57 Bit Magnetic Screwdriver Kit Electronics Repair Tool Kit for iPhone, Tablet, Macbook, Xbox, Cellphone, PC, Game Console, Black https://www.amazon.com/dp/B071PB4RPV/ref=cm_sw_r_cp_apa_i_nfujDbR06HW0P

u/ppetraki · 1 pointr/reloading

Just last night I devised the fastest case trimmer ever by chucking the lee trimmer with the pilot pin/cutter side into my 1/2" cordless drill. I then placed it in my vice so it ran horizontally like a lathe. Then I took one of those tiny irwin squeeze quick clamps (the ones so small they look like toys) and used that to drive the trigger.

I set it for a slow rotation, maybe 300 rpms to give myself a margin of safety, and then got to work. I was able to process 2-300 223 cases in about an hour.

My hand got tired from screwing and unscrewing the case holder due to lack of leverage on the whole thing. I realized I could use the magnetic bit holder for my drill and that improved things. I plan on getting one of these stubby 1/4" bit holders which should solve the problem.

https://smile.amazon.com/gp/product/B004A910HO/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A2WRUBMLJPZ2AL

Try it! :)

u/JoeReal · 1 pointr/EDC

Hi!

So there will be two bits that come with the Fulcrum. T6 and T8 torque bits. They're what most knives use for assembly.

Here is a full torx set.

And any 4mm bits will work.

You're a great Son-in-Law, btw!

Thanks!

u/Creeper_798 · 2 pointsr/Gameboy

This is a cheap and very useful screwdriver set that includes a tri-wing bit. I've used this for a while and it works great. https://www.amazon.com/gp/product/B01KQO8HYK/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

u/torrentfox · 3 pointsr/motorcycles

Another tool that can really help is a T-handle hex bit holder. In my experience, this is the best driver to work on carbs. For screws that are are already mangled, or when I expect that they'll be seized (front brake master cylinder cap x1000) and I need more assurance, I use the $8 Harbor Freight impact screwdriver.

u/myusernameisunique02 · 1 pointr/Tools

This was very helpful - thank you. One of the reasons I was looking at a set was simply that if I go out and purchase 4 good quality bits, that will cost me $10-15, whereas if I buy the set, it's an extra $10, but gets me most of the bits in the book. You are right though - no sense in paying for something that I don't need.

When using screwdriver bits in a drill, is there any sense in using a bit holder as opposed to putting the smaller bits right into the chuck (which seems like a bit of a pain), or is that redundant?

Is it worth paying ~4x as much for a set of titanium drill bits as opposed to the black oxide? I don't anticipate drilling into metal anytime soon, so it might be a waste of durability using titanium for holes that don't need a titanium drill bit.

And that makes sense about the knife. Do you have any recommendations on knifes that have a stronger hinge?

u/Blurgas · 2 pointsr/electronic_cigarette

Depending on lighting they can look like Hex/Allen heads, but they're definitely a T5 Torx.
As for keeping the Pico or buying something else, I'd say that's up to you, but mine have been running like champs for several months and that's after having shattered a Subtank Mini from a drop of about 2-3ft and busting 2 drip tips off of my Naut Mini's.
As long as the Pico is still working as it should and the only problem is the screws coming loose, I'd probably save myself the money and fix it.

By the way, here's an Amazon link for one of the tool kits I have. It's got the T5 bit and a bunch of other bits for small screws and such.

For thread locker, probably hit up your nearest hardware store and ask. You're not going to need anything super strong and when you're ready to use it, just put a drop on a piece of cardboard and dip the threads of the screw into it. Also note that you'll probably have quite a bit of trouble removing the screws afterwards should you ever want to.
If anything, tighten them up with the proper bit and see how well they stay in place before you glue them in permanently

u/julio_von_julio · 1 pointr/birdcharger

this is a handle I like and use, https://www.amazon.com/Felo-0715732350-4-Inch-T-handle-Holder/dp/B000E62NIC

good value! German tool. It is basically a 1/4" bit handle. I like having different handles for the differing bits I use. It makes things faster/ easier than sitting there juggling bits. Once you have the bit size and specification figured out, you do different things from there, maybe get an extra one or two or whatever. Anyway it is a great thing, as you can imagine, to turn a loose disco into a happy scooter. does not work every time. I report the ones that are missing 3 out of the 4 base screws. but I tell you, Often I have tightened up about 70% of them. It's a real issue.

u/hate_picking_names · 1 pointr/knifeclub

These things are tiny, but not a bad size really. I ordered what I thought was one of the Wera bit holder and got three which is fine by me. Also got a set of Wiha T5-T10 Torx bits to go with it.

Haven't really used them yet but they seem nice.

u/Devan1515 · 1 pointr/pcmasterrace

ORIA Precision Screwdriver Kit, 60 in 1 with 56 Bits Screwdriver Set, Magnetic Driver Kit with Flexible Shaft, Extension Rod for Mobile Phone, Smartphone, Game Console, Tablet, PC, Blue https://www.amazon.com/dp/B01E16J6RQ/ref=cm_sw_r_cp_api_i_wDfADb9JXTR73

This is what I used and I was able to put everything together but all really need a good screwdriver and some bits but the kit I linked has everything you need and more

u/NoBeerNoWork · 4 pointsr/whatisthisthing

Screw starter. Pictured ready to engage a straight slot screw allowing you to thread in tight spaces. Like this: https://www.amazon.com/Stanley-Proto-J9866-Slotted-Phillips/dp/B002C64SKS/ref=sr_1_2?keywords=screw+starter&qid=1565674797&s=hi&sr=1-2

u/ashlayne · 1 pointr/videogames

Honestly, if I were to buy another precision set, I'd go with this that I just found on Amazon. But if you just want the one type of bit, the name of what you're looking for is Torx bits.

ORIA Screwdriver Set, Magnetic Driver Kit, Professional Repair Tool Kit, 60 in 1 with 56 Bits Precision Screwdriver Kit, Flexible Shaft, for 8, 8 Plus/Smartphone/Game Console/Tablet/PC https://smile.amazon.com/dp/B01E16J6RQ/ref=cm_sw_r_cp_apa_i_.1fXCbBAV24QJ

u/GraZZmaZter · 2 pointsr/Tools

I have the 26pc set. The magnetic holder works well, however it does make it harder to see the depth when going into wood. The double ends work, but the included pair are a hair short of being more useful. I think they do make long ones.

At the end of the day, I feel a lot of people forget that bits are supposed to be expendable. Even if you make sure to use the right size bits, these 18v impacts and drills shred em eventually.

https://www.amazon.com/dp/B0042CF03Y?psc=1

u/Exolia · 4 pointsr/functionalprint

Not the same exact, but pretty dang close and the one I have:

Hautton Precision Screwdriver Set, 60 in 1 with 56 Bits Magnetic Screwdriver Kit, Stainless Steel Professional Repair Tools Kit for Phone, Laptop, PC, Camera, Game Console, Glasses, and More -Blue https://www.amazon.com/dp/B07TQ5PM1T/ref=cm_sw_r_cp_api_i_W9dWDbJAP2AJY

u/tm204 · 2 pointsr/techtheatre

I agree with the others who have said teach as much as you can. If they really don't have the skill you need in the shop you need to let the organization know you are trying to do too much with this the labor you have. You can't do it all.

BTW driving a 3 inch screw is not easy buy an extension bit with a sleeve like this one and you will get much better results.
http://www.amazon.com/DEWALT-DW2055-Magnetic-Bit-Holder/dp/B0000225P9

u/Jathm · 2 pointsr/BuyItForLife

I recommend http://www.amazon.com/Felo-0715732350-4-Inch-T-handle-Holder/dp/B000E62NIC

it is not ratcheting, but a good t handle is worth its weight in gold. I can put far greater pressure on stubborn bits with this. It might not be a replacement for you, but its a great addition.

u/devman0 · 2 pointsr/homelab

FWIW I bought the set linked below when I needed to open up my Nexus 9 to replace the battery. It has quickly become my favorite kit for everything, in particular the hex bits are nice for not having to go hunting around for an allen wrench.

https://www.amazon.com/ORIA-Screwdriver-Professional-Precision-Smartphone/dp/B01E16J6RQ/

u/neil_striker · 1 pointr/AskEngineers

DEWALT DW2054 1/4-Inch Compact Magnetic Drive Guide https://www.amazon.com/dp/B0000225P8/ref=cm_sw_r_cp_api_Aufnyb5Z4K08F

Not that specifically since it uses a magnet but that's the one I own. You might want to also look at this one

DEWALT DWA3HLDIR IMPACT READY FlexTorq Bit Tip Holder with Screwlock System https://www.amazon.com/dp/B00GMHDRMS/ref=cm_sw_r_cp_api_AvfnybF3HYQTK

u/WillisaurasRex · 1 pointr/pcmasterrace

https://www.amazon.com/ORIA-Screwdriver-Professional-Precision-Smartphone/dp/B01E16J6RQ/ref=sr_1_3?ie=UTF8&qid=1511977685&sr=8-3&keywords=oria

I work in a computer repair shop. We found this set last year and I highly recommend it. The build quality is great, the screwdriver is extendable, and all the bits are magnetic. They saved money on the part the bits sit in being formed plastic but I have not found another tool set that can match it for price to quality!

Edit: For spelling and format.

u/eye_panic · 1 pointr/knifeclub

Yeah I purchased it from Amazon, it’s a nice little driver.

Wiha 28103 Magnetic 1/4 Bit Holder, Stubby, 57mm https://www.amazon.com/dp/B004A910HO/ref=cm_sw_r_cp_api_tzhOAbH10Z6NP

u/RavynousHunter · 1 pointr/techsupport

Solved it myself. For any of you spacemen of the future that might be trying to do the same thing to this kind of laptop, here's a little help:

  • You need a T5 torx screwdriver as well as extremely small Philip's head drivers. This set had everything I needed.

  • You need to pop the back plate off, first. In addition to screws, its attached to arms that are attached to the screen; all you have to do is wiggle them a little and they'll separate.

  • Remove all screws except the ones attached to the fans. Those don't need removal.

  • Open the laptop up partway and press the top plate (the part that covers the keyboard) forward until it just comes off. After that, flip it over as if you're going to use it and carefully lever the cover off to expose the RAM.

  • The RAM is the chip in the centre, there's only one slot and its filled by an 8GB RAM stick, so you need a 16GB+ stick. The rest of the RAM is soldered directly to the mobo.

  • Once you're done, snap everything back into place and make sure the rear plate's back on the swivel arms of the screen. Rescrew everything together and you should be golden.
u/Smart_Dumb · 1 pointr/sysadmin

My grandma always buys crap from As Seen On TV that always make me roll my eyes. Until one time she gifted me something like this.

It is so freaking useful. Many clients marvel at how useful it is (I get sent to do a lot of rack n stacks). Just hold the drill wherever it fits and line up the bit and off you go.

^^drill ^^not ^^included

u/Fast2Furious4 · 3 pointsr/Gameboy

You could probably buy the two as a set on eBay for like $7. Or for double that you could get yourself a nice screwdriver set. This is the one I have.

u/ARKnife · 8 pointsr/knives

Those are called torx bits.

I use this VCOO screwdriver set, it's great cause it covers most common and even uncommon screws used in various knives.

The only bit that stripped so far is the #6 one (was probably used the most), so I have a spare hardened (Wiha-like quality) #6 just in case.

I recommend getting a spare set of #6-#10 torx bits for those double sided pivots.

u/jKaw · 1 pointr/NintendoSwitch

I bought a blue kit from Amazon a few months back and it has really came in handy, iPhone, switch, PS4 controller. It’s usually around 11-15 dollars and it comes in a blue or orange color scheme.

Something like this

ORIA Screwdriver Set, Magnetic Driver Kit, Professional Repair Tool Kit, 60 in 1 with 54 Bits Precision Screwdriver Kit, Flexible Shaft, for iPhone 8, 8 Plus/ Smartphone/ Game Console/ Tablet/ PC, etc https://www.amazon.com/dp/B01E16J6RQ/ref=cm_sw_r_cp_api_kscMAb2HB4TF1

u/RealisticContext · 1 pointr/NintendoSwitch

Yeah, I used this kit on my joycons

https://www.amazon.com/gp/aw/d/B01E16J6RQ/ref=yo_ii_img?ie=UTF8&psc=1

The one you're looking at looks pretty much the same.

u/LordPeytor · 10 pointsr/EDC

This is the one I use at work and it's great.

u/TheRealTofuey · 1 pointr/pcmasterrace

https://www.amazon.com/dp/B01E16J6RQ/ref=cm_sw_r_cp_apa_i_1V2XDbDHRJKVW

This is the kit I use. I highly reccomend it as having magnetic tips is a godsend and just having multiple sizes it general makes it so you don't strip the screws.

u/bightchee · 1 pointr/DIY

I think these are just as handy. It's not just that it's magnetic but the sleeve slides out over the screw to hold it in place until you bury it, where the sleeve then retracts as you push.

Additionally, I have found these to be of great use recently. I took apart a PS3 with three stripped screws and this thing backed them all out.

u/kallrobin · 2 pointsr/StonerEngineering

Perhaps something like this and then a diamond tip on that then. I suggest you fill the outer chamber with sand for stability.

u/rickdod3 · 1 pointr/DIY

Why not just buy an extension? You should be able to find one at almost any store under $5.00. It will also come in handy for the future.

Here is one for $5.03 with free prime shipping

u/t2231 · 3 pointsr/woodworking

T-handle hex bit holders sound like they'd solve your issue.

u/wlkngcntrdctn · 1 pointr/Innokin

> torx screws not hex

-
You are so right! Thank you so much!

-
Though I've seen, worked with, and even have some bigger torx drivers in my drill driver set, it never occurred to me what those particular screw heads were called, nor did it occur to me that it is what's in my mod.

-
Also, if anyone else is ever in need of a cheaply priced torx screwdriver set, I found this one on Amazon for $8.99, which has 24 batch head sizes :)

u/BrassAge · 2 pointsr/Authentic_Vaping

I sure do! I actually have the entire iFixit kit, which I enjoy, but the first link is just the bits and driver.

u/soph0nax · 6 pointsr/AskElectronics

A set like this?

u/aclim · 3 pointsr/MouseReview

This ORIA Screwdriver Set, Magnetic Driver Kit, Professional Repair Tool Kit, 60 in 1 with 56 Bits Precision Screwdriver Kit, Flexible Shaft, for 8, 8 Plus/Smartphone/Game Console/Tablet/PC https://www.amazon.com/dp/B01E16J6RQ/ref=cm_sw_r_cp_api_i_hr0vCbWAS8NP4

u/duplicitea · 1 pointr/wii

ORIA Precision Screwdriver Kit, 60 in 1 with 56 Bits Screwdriver Set, Magnetic Driver Kit with Flexible Shaft, Extension Rod for Mobile Phone, Smartphone, Game Console, Tablet, PC, Blue https://www.amazon.com/dp/B01E16J6RQ/ref=cm_sw_r_cp_tai_PY5MDbR6F2XXD

u/cooperred · 4 pointsr/knifeclub

Wiha bits

$13 for a set of almost every size you'll need, then get any driver you like.

u/gimnasia22 · 1 pointr/pcmasterrace

I have this screwdriver set. ORIA Precision Screwdriver Kit, 60 in 1 with 56 Bits Screwdriver Set, Magnetic Driver Kit with Flexible Shaft, Extension Rod for Mobile Phone, Smartphone, Game Console, Tablet, PC, Blue https://www.amazon.com/dp/B01E16J6RQ/ref=cm_sw_r_cp_api_i_xYMFDbYJVBT4Z

I’ve used the 2.0 on the other screw and it worked fine, but when i went to do it with the other (which i’ve tried with some of the one that didn’t fit cause i’m a moron) the screw head was that damaged, any advice or video will be appreciated

Thx

And also sorry for my bad english and terminology. I’m from Argentina and speak spanish

u/Hgfrkhfddr · 3 pointsr/NintendoSwitch

You can fix them yourself easy, the disconnect problem isn't a bad antenna, it's the fact that there's nothing to insulate the antenna from interference. Takes just a few minutes to fix.

Here https://youtu.be/qzM1gqrRoqA If you have a little piece of conductive foam you can use that, this guy uses a piece from a different part of the joycon, which is super convenient, or you can use a new piece if you have some, or you can use a little piece of foil wrapped in electrical tape, that's what I did. But following this guy's video should work the same. I did this fix over a year ago, and have had no lag or sync issues since then.

I used this tool kit https://www.amazon.com/gp/aw/d/B01E16J6RQ

u/benmandude · 2 pointsr/NoStupidQuestions

I'm not sure of a specific brand, just try to find something like this

u/MisterNoisy · 3 pointsr/guns

Amazon sells a ton of sets like this for cheap. I keep one in my gun toolbox and one in the 'junk drawer'.

u/steinauf85 · 1 pointr/Tools

Dewalt makes some magnetic holders and sleeves. the first one is for 1" bits, the second two are for the 2"+ impact bits with torsion zones. there should be several bit sets that also have these included. the sleeve with magnetic ring at the end holds the screw on your bit securely, but then retracts once it has been driven in far enough.

https://www.amazon.com/DEWALT-DWA3HLDIR-IMPACT-FlexTorq-Screwlock/dp/B00GMHDRMS

https://www.amazon.com/DEWALT-ACCESSORIES-DWA2PH2IR2S-Phil-Sleeve/dp/B00IOXB450

https://www.amazon.com/DEWALT-Drill-Magnet-Sleeve-DWA2PH2SL/dp/B00NS7OZPI

u/5olara · 1 pointr/buildapc

It's just a screwdriver. Don't need to get fancy.

ORIA Precision Screwdriver Kit, 60 in 1 with 56 Bits Screwdriver Set, Magnetic Driver Kit with Flexible Shaft, Extension Rod for Mobile Phone/Smartphone/Game Console/Tablet/PC, Blue https://www.amazon.com/dp/B01E16J6RQ/ref=cm_sw_r_cp_apa_i_wzBXDb7BF4ANY

Something like this suffices, I like the options for a variety of devices not just PC. You'd use maybe 2 heads out of all of it for PC building but for the price you can't beat that. You're building a pc here so smaller heads are needed for all the small screws you'll be tinkering with.

u/Manimal4eva · 2 pointsr/nfl

if you just need the driver, not the other random stuff i have something similar to this has everything i need

u/Steven46746 · 3 pointsr/nvidia

https://www.amazon.com/Oria-Precision-Screwdriver-Professional-Electronics/dp/B01E16J6RQ

This is the kit I used, comes with everything and more for a fraction of the price.

u/Kenneth_The-Page · 1 pointr/Knife_Swap

Wiha 75988 Micro Bit Torx https://www.amazon.com/dp/B071NWC9V7/ref=cm_sw_r_cp_apa_i_IhkTCbCZDZZ9S

You shoould get this with a micro bit holder. I use a micro bit holder from a cheaper torx bit set I bought a long time ago.

u/rAxxt · 1 pointr/Coffee

You could probably do it with the drill chuck already on the drill. The problem will be holding the drill steady as you grind. So if I were you I would think about something like this:

http://www.amazon.com/Titan-Flexible-Extension-Bit-Holder/dp/B00355GLBY/ref=sr_1_2?ie=UTF8&qid=1381598689&sr=8-2

Just don't strip your Mini mill head or strip the actual burrs...or burn your coffee using friction.

u/madeyepotato · 4 pointsr/Tools

Hard to tell from the photo but I have a similar one I picked up from ifixit years ago. They've altered their design since, but this one also looks similar https://www.amazon.com/gp/aw/d/B071PB4RPV

u/darealmvp1 · 1 pointr/Tools

I found this one on amazon if youre looking for a multi bit set. Seems to have pretty good reviews but take a look at the videos. I would buy it myself but i already have a similar set that doesnt see much use. I dont know if my harbor freight one is s2 tool steel though, i know ive bent a couple of the flathead tips. Who knows maybe ill get it.

u/whodatr · 1 pointr/applehelp

I only have the screwdrivers to take the screws of the back casing off. To get to the hinges I assume I need different drivers. Do you think that this set would suffice?

https://www.amazon.com/Oria-Precision-Screwdriver-Professional-Electronics/dp/B01E16J6RQ/ref=pd_sbs_469_3?_encoding=UTF8&psc=1&refRID=E3NPMTTM2ZQC8SXNW32C

u/Mdayofearth · 5 pointsr/Nexus6P
  1. December 2016, installed Jan 2017
  2. eBay, actual items no longer available
  3. Spudger, guitar pick shaped prying thingers, mini screw driver kit, LCD screen pliers, a plastic card (not as thick as a credit card) as a shim
  4. Only my mistake with a loose finger print reader connector.
  5. Good as new.
  6. n/a
  7. The phone is over 2 years old. No new batteries are likely being made specifically for this phone, so any batteries available are likely older despite being new.
u/xx2000xx · 1 pointr/electronic_cigarette

I remember reading about that. Ironic that my Zeus is all jacked up right now with a grub screw that won't come out and I've tried everything. I ordered this from amazon today because I'm done with these shitty tools they send you: https://www.amazon.com/ORIA-Screwdriver-Professional-Precision-Smartphone/dp/B01E16J6RQ --- I've tried everything including 20 minutes in the ultrasonic, gorilla glue etc... I just got rubber bands a few minutes ago from the store which would be funny if that worked out of all the crazy stuff I tried.

The T3 is for grub screws and it should have the right fit for that too I would think.

u/warfieldm · 3 pointsr/DIY

For this particular towel bar, I'd hold it in place to mark the holes, drill pilot holes for the screws, use a driver for the topmost and bottommost screws, and use a manual screw driver for the inner screws. With properly sized pilot holes, installing a screw manually is not very difficult for screws of that size. You can also drive the screws into the pilot holes and remove before hanging the towel bar but that's not as strong of a result. That's assuming you're going into a stud.

Other things I'd consider...

Extra long bit extension as mentioned earlier.

Flexible bit extension. Keep the driver speed slow with these.


u/NavNavsGotARocket · 3 pointsr/NintendoSwitchDeals

No downsides. I followed this guide. Just be careful and take your time. There are lots of small parts and it can get frustrating. I suggest taking plastic cups and keeping the screws from each step separate and labeled. Here are the tools I used.

https://www.amazon.com/gp/product/B071PB4RPV/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B06XXXQHS8/ref=od_aui_detailpages00?ie=UTF8&psc=1

u/hcurmudgeon · 2 pointsr/prusa3d

It depends...Due to a medical issue my hands shake a fair bit so I used one of these: https://amazon.com/General-Tools-500-Precision-Screwdriver/dp/B002XZLTQO and drove the screws all the way but stopped just short of tightening then did the final tightening by hand with a hex key or the hand driver in the kit linked below. It beat dropping the allen key on the floor every 4 minutes! Now this power driver uses 4mm shank "micro bits" and the German tool makers Wiha and Wera, which are seriously pro grade and expensive as all hell, market these bits but this kit I linked to will supply you with all the bits you need and then some.

https://amazon.com/Syntus-Precision-Screwdriver-Electronics-Cellphone/dp/B071PB4RPV

Oh, and use lithium AAA batteries in your driver as it'll kill regular batteries in just a few hours.

Full disclosure I have zero, nill, null, nadda financial interest in the above linked items.