Reddit mentions: The best spotlight fixtures
We found 14 Reddit comments discussing the best spotlight fixtures. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 8 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Xking Dimmable LED1.5W 12VDC Mini Spotlight Jewelry Showcase Display Lighting Fixture Black Shell Surface Mount with Online PWM Dimmer(Pack-4,Warm White 3000k)
- Mini Dimmable spotlight with 360° Rotatable,2 color temperature options,warm white/cold white.(Silver Shell Search ASIN:B079CKPP3B), 2.5W,please search ASIN: B0815W8QDB.
- Each mini jewelry light,25°beam angle,brightness 100 lumens,particularly suitable for accent lighting.
- Mini display cabinet light with AC100-240V to DC12V UL Certification Power adapter,plug and play,easy and convenient connections.
- Mini LED vertical rod shooting lamp 1.5W with 2pcs install screw for each jewelry light.(There is no wire slot at the bottom of the mini spotlight in this list. If you need wires from one side, please search for: B07DW67P55)
- This showcase light kit, includes a online PWM Dimmer,0-100% brightness adjustment Can also be used as a power switch.
Features:
Specs:
Color | Pack-4,warm White 3000k |
2. 1.5W 12VDC Dimmable LED Mini Spotlight Jewelry Showcase Display Lights Black Shell Surface Mount with Wireless IR Dimmer (Pack-4,Warm White)
- Mini spot lamp with 360° Rotatable,2 color temperature options,warm white or cold white,please choose to buy as needed. Blue/Green, please refer ASIN: B07ZY4VYX3 (Silver Shell Search ASIN:B079CKPP3B)
- Each mini jewelry light,25°beam angle,brightness 100 lumens. it excels as an application in any area where you need task lighting and want the look to be contemporary and subtle.
- Mini display cabinet light with AC100-240V to DC12V UL Certification power adapter,plug and play,easy and convenient connections.
- A wire trough is designed at the bottom of each lamp in this list to facilitate the extension of the wire from one side,it can be fixed with screws or 3M tape (included).If you do not need a wire slot at the bottom, please search for:B078V7ZH4X
- Dimmable Full kit. Convenient multi-function remote controller lets you control the light remotely with 10 brightness level (10% to 100%) and adjustable flashing speed in 3 different modes: flash / strobe / fade. Note:When using the remote control, the remote control must be aimed at the signal point on the receiver (Control distance within 16ft, any direction),there can be no obstacles between them!
Features:
Specs:
Color | Pack-4,warm White |
3. IKEA - INREDA Cabinet Spotlight, Silver Color
Suitable for use in confined spaces, such as cabinets, bookshelves and closets, as the LED light source emits low heat.Cord length btwn lights: 39 3/8 "The LED light source consumes up to 85% less energy and lasts 20 times longer than incandescent bulbs.Cord length btwn lights: 1.0 mDesigner: Mikael...
Specs:
Color | Silver |
4. Satco Products Multi-Purpose Portable Spot Light, White - 2 Pack
Contemporary Styling60 watts maxMulti directional aiming with positive position locking methodCan be used as a wall mount or free standing on a table or floorPorcelain Socket
Specs:
Color | White |
5. Ikea 803.863.19 Jansjo LED Clamp Spotlight, Black, Multi-Function
Uses LEDs, which consumes up to 80% less energy and last 20 times longer than incandescent bulbsAdjustable arm for easy directing of lightSlim and lightweight. Easy to place in small spaces and move to wherever you need lightThis product requires assemblyHeight: 16", Clamping range up to 1 1/4"
Specs:
Color | Black |
Height | 6.299213 Inches |
Length | 4.724409 Inches |
Number of items | 1 |
Size | multi-function |
Weight | 0.7 Pounds |
Width | 2.362205 Inches |
6. 6-Pack 12Watt 5/6"- Inch Energy Star ETL-Listed Dimmable LED Downlight Retrofit Baffle Recessed Lighting Kit Fixture, 3000K Warm White LED Ceiling Light, Wet Location - 950LM (3000K)
DIMMABLE: compatible with most LED dimmers, using an internal driver, no external ballast or starter needed. Set the light to any mood you desire. EASY INSTALLATION: Comes with E26 base adapter and 2pcs flip mounting clips, fits most 4inch metal cans for retro-fit installationLED Recessed Lighting R...
Specs:
Color | 3000k |
Height | 3.38 Inches |
Length | 7.38 Inches |
Size | 5/6 Inch |
Width | 7.38 Inches |
7. WAC Lighting Lighting FP-K-WT Framing Projector for SiloX10, or Silo X20 Track Head in White Finish
Can be used with the following WAC Lighting Fixtures: h-2010, j-2010, l-2010, h-2020, j-2020, l-2020, mo-2010, mo-2020Premier series framing projector accessory for use with track heads, display lights, and monopoints. Attaches to the end of the fixtureFour tabs can be adjusted to control the shape ...
Specs:
Color | White |
Height | 2.58 Inches |
Length | 4.63 Inches |
Number of items | 1 |
Size | 2.58x4.63x2.58 |
Width | 2.58 Inches |
8. Tech Lighting 700KJAN24S Tech Lighting 700KJAN24S K-Jane Head, Satin Nickel
- K-Jane Head 24IN, sn
- System - Kable Lite
- Category - Low-Voltage Heads
- Finish - Satin Nickel
Features:
Specs:
Color | Satin Nickel |
Height | 24.65 Inches |
Length | 5.1 Inches |
Number of items | 1 |
Size | 24.00x24.00x1.00 |
Weight | 0.15 Pounds |
Width | 5.95 Inches |
🎓 Reddit experts on spotlight fixtures
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where spotlight fixtures are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
It's 4 Billy bookcases with 8 Morliden doors, with 8 Inreda spotlights. I was looking for furniture/display options like OP and stumbled on this person's blog, I plan on making a similar setup like this.
If you search for "LED cabinet jewerly museum spotlights" will yield great results.
These have dimmable controllers, and select "cold white" light, not "warm white" light.
https://www.amazon.com/dp/B078V7ZH4X
https://www.amazon.com/dp/B07DW67P55
In case you’re still looking I put two BR30’s in these but they’ll work just fine with regular bulbs. (Note the BR30’s stick out but only very slightly and not necessarily in a bad way.) https://smile.amazon.com/Satco-Products-SF77-394-Multi-Purpose/dp/B07KRK11YS/ref=mp_s_a_1_13?crid=25PIZUKNN7NZX&keywords=spotlights%2Bindoor&qid=1551142569&s=gateway&sprefix=spotlights%2B&sr=8-13&th=1&psc=1
I set that up on my Pi. It works great. Although, use a minimum of a 3 amp power supply versus the regular 2.5 amp supply because it’s a known issue of the software and the Pi dropping out and losing connection to your Main computer and the iPhone app. I’m going to test it today with a different power supply. The project still prints normally you just lose server connection to monitor the print. Annoying but the culprit is most likely the power supply and lack of amperage.
This camera (1.3v) works great on this light from IKEA. (Ikea 803.863.19 Jansjo LED Clamp Spotlight, Black, Multi-Function, https://www.amazon.com/dp/B00R3LQW2Y/ref=cm_sw_r_cp_api_i_Ni.7CbWNH05N3)
Here is the Thingiverse camera mount.
https://www.thingiverse.com/thing:3122247
https://i.imgur.com/GHegBrz.jpg https://i.imgur.com/tRHZZdG.jpg
Something like this https://www.amazon.com/dp/B07DWJ1XXJ/ref=cm_sw_r_cp_awdb_t1_RqlKDbZK7AD7E
The compartment lights are [these guys.](
https://www.amazon.com/gp/product/B01F74316S/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1)
The top lights are these guys.
When i searched framing projectors i got some new stuff much closer to what i want! so thanks for that. now i just need to find a recessed version of this -
https://www.amazon.com/WAC-Lighting-FP-K-WT-Framing-Projector/dp/B071JMRFDS/ref=sr_1_3?keywords=framing+projector&qid=1550077242&s=gateway&sr=8-3
Are these the same Jansjo lights you're referring to?: https://www.amazon.com/dp/B00R3LQW2Y
Xking Dimmable LED1.5W 12VDC Mini Spotlight Jewelry Showcase Display Lighting Fixture Black Shell Surface Mount with Online PWM Dimmer(Pack-4,Warm White 3000k) https://www.amazon.com/dp/B078V7ZH4X/ref=cm_sw_r_cp_apa_i_YxOTCbEKK7SH8
https://www.amazon.com/gp/aw/d/B07DW67P55?psc=1&ref=ppx_pop_mob_b_asin_title&th=1
With some kind of low voltage lighting the shaft itself could carry the electricity to ground. Then you'd just need one wire for +, and that could probably be made unobtrusive.
I used to have some low-voltage halogen "cable lights" where the halogen bulbs were connected to the power source using uninsulated metal rods. Kind of like this.