Reddit mentions: The best studio subwoofers
We found 25 Reddit comments discussing the best studio subwoofers. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 11 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Rockville Apm10b 10" 400W Powered/Active Studio Subwoofer Pro Reference Sub
- 10" 400 Watt Active Studio Subwoofer in Black. Built-in Class D Amplifier. Enclosure is made of top quality MDF wood. Comes in 3 enclosure finish options Wood finish painted black. Wood finish painted white. Wood finish with vinyl front board
- The enclosure is built with the perfect amount of air space to maximize sound quality for a studio. The front-firing port is built to the perfect spec to enhance the sound. Class “D” Amplifier Circuitry with Auto-Switching Power Supply. LED Power on/Stand-by Indicator on Rear Panel
- Rubber woofer surrounds increases sound quality and eliminates unwanted distortions. Computer Optimized Electronic Crossover Network filters out Highs and Mids. Front-Firing Port Shaped and Designed by Sound Engineers to Reduce Port Turbulence and Deliver Distortion Free Top Sound Quality!
- Specially Wound Voice Coils Produce Accurate Response along the Low Frequency Spectrum. Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound! Transducer Production Line to Make the SPL Performance Stable. Shiny metal mesh grill
- Crossover Frequency Control allows you to adjust low frequency input: 50Hz – 150Hz. ¼” TRS input jack. Left and Right XLR input/outputs. RCA input/outputs. Woofer Impedance: 8 Ohm. Frequency Response: 34Hz - 150 KHz. 10" woofer with rubber surround and paper cone with painted
Features:
Specs:
Color | Black |
Height | 19.3 Inches |
Length | 19.9 Inches |
Number of items | 1 |
Size | 10 inch |
Width | 17.4 Inches |
2. Monoprice Stage Right 10-Inch Powered Studio Multimedia Subwoofer - (605999)
- Studio ready flat frequency response allows mix engineers to truly hear what is being recorded and gives an uncolored representation of your final product. What you hear is what you get.
- 200 Watt RMS power give you plenty of headroom to hear extremely clean bass reproduction of your mix and is capable of shaking just about any studio environment when the mix is good.
- Balanced XLR and ¼” ins and high-pass outs make this sub flexible for any project to professional studio set-up and use an open-latch footswitch (not included) to turn off the sub and run mains full-range
- Take control of the sound with -20 to +6 dB gain knob, 0 or 180° polarity switch, and auto on function so your bass mix is exactly where you need it every time for any type of music project.
- Buy with confidance with our 30-day money back guarantee and 1-year warranty.
Features:
Specs:
Color | Black |
Height | 19.4 inches |
Length | 18 inches |
Number of items | 1 |
Release date | June 2019 |
Size | 10-Inch |
Weight | 38 Pounds |
Width | 16.2 inches |
3. KRK 10S2 V2 10" 160 Watt Powered Studio Subwoofer
10" glass aramid composite wooferBass extension to 28Hz with a max SPL of 117 dBFootswitch control enables/disables sub and crossover filter (footswitch not included)Curved design with front-firing bass port for placement flexibilityPowerful, lightweight Class D amplification
Specs:
Color | Black |
Height | 17.716535415 Inches |
Length | 20.078740137 Inches |
Number of items | 1 |
Release date | August 2016 |
Size | 10S V2 |
Weight | 41.5 pounds |
Width | 18.897637776 Inches |
4. Behringer Monitor Speaker And Subwoofer Part (NX3000D)
- SmartSense Loudspeaker Impedance Compensation
- Thermal Overload Protection
- Twist-lock Speaker Connects
- 2-channel Power Amplifier
- 900W Peak/ch at 4 ohms
Features:
Specs:
Height | 3.7 Inches |
Length | 19.02 Inches |
Number of items | 1 |
Release date | July 2018 |
Weight | 7.936641432 Pounds |
Width | 9.09 Inches |
5. Adam Audio Sub8 Powered Studio Subwoofer Black
Small yet deceptively powerful, it has an 8" woofer with large 50mm voicecoil driven by a 160W amp2 motorized knobs let you tailor input levels and crossover frequencies to your studio and can be controlled with the included wireless remoteAn ideal match for ADAM monitors such as the A7, ANF10, P11A...
Specs:
Height | 16.1 Inches |
Length | 15 Inches |
Number of items | 1 |
Weight | 26.45547144 Pounds |
Width | 10.2 Inches |
6. Mackie MR mk3 Series MR10Smk3 10-Inch Powered Studio Subwoofer
Powerful, deep extended bass for your Mackie MRmk3 studioDesigned for high-output and superior low-frequency performanceShelf-ported for satisfying, deep low endStereo XLR and TRS connection offer input flexibilityStereo balanced TRS outputs for connection to mains
Specs:
Height | 18.7 Inches |
Length | 18 Inches |
Number of items | 1 |
Weight | 31.1 Pounds |
Width | 15.5 Inches |
7. Rockville APM10C 10" 400 Watt Powered/Active Studio Subwoofer Pro Reference Sub, Classic Wood, 10 inch
- Rockville APM10C 10" 400 Watt Active Studio Subwoofer in Classic Wood Finish. Built-in Class D Amplifier. 200 Watt RMS. Enclosure is made of top quality MDF wood. Our enclosure is not particleboard it is true high-grade MDF!
- The enclosure is 0.7" thick while the front board of it is a full 1.34" thickness to give you the ultimate best sound quality! Comes in 3 enclosure finish options Wood finish painted black. Wood finish painted white. Wood finish with vinyl front board
- Class "D" Amplifier Circuitry with Auto-Switching Power Supply. LED Power on/Stand-by Indicator on Rear Panel. Rubber woofer surrounds increases sound quality and eliminates unwanted distortions.
- We developed the Most Optimized Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to Play Back Exactly the Way it was Recorded! Specially Wound Voice Coils Produce Accurate Response along the Low Frequency Spectrum.
- Thick "Wadding" protects inside the subwoofer cabinet - Wadding is a white, artificial silk-like material that we put inside the subwoofer cabinet for multiple reasons.
- Every subwoofer in Production Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to our Specifications and Standards. We use a "6Sigma" style Quality Assurance of Each Product
- Inputs / Outputs / Controls: Volume control. Crossover Frequency Control allows you to adjust low frequency input: 50Hz - 150Hz. 1/4" TRS input jack. Left and Right XLR input/outputs. RCA input/outputs.
- Details: Certification: CE and RoHS Compliant. Amplifier: Class D, very efficient amplifier with top components! (ST--STA309, ST--STA516, SMPS).Woofer Impedance: 8 Ohm. Signal to noise ratio: 98 dB (Maximum output with THD+1<1%, A-weight).THD: 0.8%.
- Frequency Response: 34Hz - 150 KHz. 400 Watts peak output. 200 Watt RMS output.Input voltage: 120V. 10" woofer with rubber surround and paper cone with painted. Product Dimensions in Inches: (W*H*D): 13.4'' x 14.5'' x 15.7''.
- Shipping Dimensions in Inches: (W*H*D)17.3 ''x 19.3'' x 19.7 ''. Net Weight: 28.7 LBS. Shipping Weight: 34.1 LBS.Input Impedance (Ohms): 10 K Ohm Balanced. System Volume: (-30dB to +6dB)
Features:
Specs:
Color | Classic Wood |
Height | 19.3 Inches |
Length | 19.7 Inches |
Number of items | 1 |
Size | 10 inch |
Width | 17.3 Inches |
8. Buttkicker BK-CT Concert Tactile Transducer Shaker for Bands
- Frequency Response: 5 - 200 Hz
- Nominal Impedance: 2 ohms
- Power Handling: 400 watts min. / 1500 watts max.
- Dimensions: 5.375" H x 5.375" W
- Piston Weight: 3.75 lbs. / 1.48 kg
Features:
Specs:
Height | 8 Inches |
Length | 8 Inches |
Number of items | 1 |
Weight | 10.85 Pounds |
Width | 8 Inches |
9. Rockville APM10W 10" 400 Watt Powered/Active Studio Subwoofer Pro Reference Sub
Rockville APM10W 10" 400 Watt Active Studio Subwoofer in White. 200 Watt RMS. Built-in Class D Amplifier. Enclosure is made of top quality MDF wood. Our enclosure is not particleboard it is true high-grade MDF!The enclosure is 0.7" thick while the front board of it is a full 1.34" thickness to give ...
Specs:
Color | White |
Height | 19.3 Inches |
Length | 19.7 Inches |
Number of items | 1 |
Size | 10 inch |
Width | 17.3 Inches |
10. KRK 10S2-NA 10" Powered Studio Subwoofer
- Protective steel-front grille provides protection
- Integrated crossover matches any main speaker system
- Front-firing port provides low-frequency extension without boundary coupling
- Fuse : 100 to 120 V: 4.0 A - 250 V slow blow
- Dimensions (HxWxD) : 15.0 x 14.0 x 16.1" (38.2 x 35.5 x 40.8 cm)
Features:
Specs:
Weight | 7 Pounds |
11. Yamaha HS8S Powered Studio Subwoofer 8" + (3) XLR to XLR Cables
- Yamaha HS8S Powered Studio Subwoofer.
- (3) Strukture PRO20M7 Heavy Duty XLR to XLR Cables - 20 ft Cables.
- 8inch bass-reflex powered subwoofer.
- 22Hz - 150Hz frequency response.
Features:
Specs:
Color | Black |
Height | 16.1 Inches |
Length | 18.2 Inches |
Size | 19.1 x 18.2 x 16.1 inches |
Weight | 34.6 Pounds |
Width | 19.1 Inches |
🎓 Reddit experts on studio subwoofers
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where studio subwoofers are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
I've been in the market for speakers for playing music + playing guitar / bass. I currently have the following:
When I'm just listening to music, the speakers sound great! When I add in playing guitar along with the music, there's definitely some loss in quality. The guitar and bass both sound just fine, but not really ideal.
I've been considering ditching the logitech speakers for actual studio monitors paired with a subwoofer, but I'm not 100% whether I need to go this route if I want to play guitar + bass + music all together.
My friend comes over to play the bass as well, so we would be playing simultaneously. I took a trip to GC today and had a listen to a bunch of studio monitors and narrowed down the most pleasing (to my ears) sound to these two monitors:
Holy crap the above speakers sounded amazing. The HS7 and HS8 had me in that room for like an hour, switching back and forth between the two. I just couldn't figure out which one I liked better!
Anyways, before I go making a purchase, I wanted to see what others had to say or suggest.
My budget is 1.5K
For DJing your going to need a DJ table. Most normal tables don't really have the optimal torque, or the emphasis on build quality, needed for constant transportation and so forth. Plus you kind of have to go direct drive, unless you want to be going through belts left and right.
https://www.amazon.com/Stanton-STR8-80-Turntable-Discontinued-Manufacturer/dp/B00006FXFU/ref=sr_1_4?s=electronics&amp;ie=UTF8&amp;qid=1538455267&amp;sr=1-4&amp;keywords=stanton+direct+drive+turntable
For speakers your best bet is honestly studio monitors. How much you want to spend is almost directly proportional to how big an area you are looking to DJ. What might be good for your small apartment probably isn't going to cut it for a larger area.
These aren't the most nuanced, but will get the job done well and actually sound pretty good. Keep in mind, you'll be paying 3X or more if you want quality monitors. Plus these look decent, sport a fairly beefy 8" driver, have a remote, optical and USB in, and support stuff like BT if needed.
https://www.amazon.com/Rockville-HTS8W-Theater-Speakers-Bluetooth/dp/B0725287PG/ref=sr_1_3?s=electronics&amp;ie=UTF8&amp;qid=1538455750&amp;sr=1-3&amp;keywords=studio+monitor&amp;refinements=p_89%3ARockville
Or these, which aren't as flexible with inputs, but are more oriented towards a studio or live environment. Plus these are easy to add a matching sub to;
https://www.amazon.com/dp/B01GV0OP5S/ref=twister_B07BK8QTBH?_encoding=UTF8&amp;th=1
https://www.amazon.com/dp/B01GV0OJIG/ref=twister_B07BK8QTBH?_encoding=UTF8&amp;th=1
Keep in mind, anything less than top of the line JBL and QSC stuff is going to be sneered at by "professional" DJs. But if you aren't depending on your gear to eat, you can cut a lot of corners and still get quality sound.
Crown XLS 1502 should fit the bill.
NX3000D if you want DSP baked in.
The Crown should be a tank, but a ton of DIY people have used the Behringer without issue.
My opinion: If you're gonna build your boxes, over-build them and sell your Velodyne to compensate. You'll get better response with matching drivers in your room. When you combine your exisiting 10" with 12"s, 15"s, 18"s, or whatever the fuck they're doing with 24"s now you get different output at different Dbs along the frequency response which leads to it sounding weird in-room.
At one point I ran one 15" Ultimax along side my 10" SVS and results were pretty meh. Can you do it? Sure. It's your rig and you can run what sounds good to you but if you wanna do it "right" match the size of your subs across the board.
How may people? How big is the area? Don't you have a teacher or friend who has an electronics background to help you? Do you need a mic to speak with amplification?
If the area is not so big and the music no super loud, perhaps this would work:
2 (or 3) of these:
https://www.amazon.com/Adam-Audio-A8X-Powered-Monitor/dp/B003USF0AE/
And get 1x of bass (or get 2x of the smaller 7inch bass):
https://www.amazon.com/Adam-Audio-Powered-Studio-Subwoofer/dp/B0019Z60Y0/
I am not sure, I am a beginner in this aspect. But this would be an option.
Looking for a studio subwoofer to go with my Yamaha HS5s. It also must have 1/4 input and either XLR or 1/4 outputs.
I am looking to spend around $300-400. Here are the few contenders I have come up with. Would love opinions and suggestions.
M-Audio BX 10 - On sale for $200:
https://www.amazon.com/M-Audio-BX-Subwoofer/dp/B00PFQ1ZJ4/ref=sr_1_fkmr0_1?ie=UTF8&amp;qid=1494270776&amp;sr=8-1-fkmr0&amp;keywords=m-audio+bx+10
JBL LSR 310s: $400
https://www.amazon.com/JBL-LSR310S-Channel-Studio-Subwoofer/dp/B00I08RT3U/ref=sr_1_1?s=musical-instruments&amp;ie=UTF8&amp;qid=1494270814&amp;sr=1-1&amp;keywords=jbl+lsr+310s
Yamaha HS8S: $450, outside of my price range, only an 8" sub, but gets fabulous reviews and matches my HS5s.
https://www.amazon.com/Yamaha-HS8S-HS8-Studio-Subwoofer/dp/B00DHSK8C2/ref=sr_1_1?s=musical-instruments&amp;ie=UTF8&amp;qid=1494270849&amp;sr=1-1&amp;keywords=yamaha+hs8s
Mackie MR mk3 Series MR10Smk3: $300
https://www.amazon.com/Mackie-MR10Smk3-10-Inch-Powered-Subwoofer/dp/B00EA25G12/ref=sr_1_1?s=musical-instruments&amp;ie=UTF8&amp;qid=1494270899&amp;sr=1-1&amp;keywords=mackie+subwoofer
Looks like you might be relegated to a "studio sub" as most if not all of those have line in and out.
This actually look ok, even if its not as cheap as something like a Dayton....
https://www.amazon.com/Rockville-APM10C-Powered-Subwoofer-Reference/dp/B01DN3VLBM/ref=sr_1_26?s=musical-instruments&amp;ie=UTF8&amp;qid=1502913447&amp;sr=1-26&amp;keywords=studio+subwoofer
Ironically you can get a new AV-32 + Sub setup for even less so that may be an option as well. Maybe you could sell the 40's to recoup some of the cost.
Nope. Thats a home theater sub, single LFE (mono) input only.
The only way it would work is with an active crossover with a mono sub line output feeding it.
The cheapest "pro" sub with active crossover (which also filters the highs) I've ever found is the Rockville APM10 (in black, wood, or white)
Next up from that is Monoprice's 10" pro sub - (but only when Amazon or Monoprice sell it for $189.99 - not the price its at now!)
It's sold out on Monoprice's site (except for open box@ $159.99) - https://www.monoprice.com/product?p_id=24520
The JBL LSR305s are powered/active pro studio monitors that have an amplifier inside them so you wouldn't add another amp.
How do you control the volume? Are you adjusting on each speaker separately? Adding a subwoofer is going to add a third volume knob. Consider adding an active monitor controller or an active mixer before adding a subwoofer.
For pro studio monitors, a pro studio subwoofer. Monoprice Stage Right 10-Inch Powered Studio Subwoofer $189. It has a high pass crossover for your speakers and pro studio TRS and XLR inputs and outputs.
Oh okay so it's active monitors then, I just checked and they don't look like they have sub-out ports.
I think you need something like this sub, it has L+R input which you can connect a cable like this, then use the XLR out on the sub to connect to the XLR input on your monitor speakers, via this cable.
There is a post about your same speakers on how to connect it to a sub here, that's where I got the sub from.
Boy, are you in for an experience! This is one of the most expensive versions. You can also do this for under $100, including the amp, if you look around.
Edit: This is a better link.
OSD audio PS12
Theater solutions Sub15DM Mahogony WAF freindly!
Monoprice stage Right 10 inch tudio Subwoofer
Acoustic audio by goldwood PSW600 LFE series subwoofer
HMMM.
https://www.amazon.ca/Monoprice-605999-Powered-Studio-Subwoofer/dp/B00TZBBZV8
You could get one of these. They're designed for Rokits but I don't know the exact cabling between them. I've heard the 5s are plenty bassy though.
Just spend 20usd more and go for this one:
https://www.amazon.com/Monoprice-10-Inch-Powered-Multimedia-Subwoofer/dp/B00TZBBZV8
I think it highpasses the signal to your mains too, i think
Sound quality is the main difference. Also the sub you linked is for home theater. this KRK sub gets lower in the frequency as well, and thats something you would want if you producing. You can go with the cheap sub like that but it wont replicate the low end very well. look for the lowest frequency you can get, 20Hz would most likley be as low as you can get but even then im not sure if thats available in a studio sub.The KRK I linked gets down to 35hz while the home sub you linked only gets to 50hz. And id be worried if you were using studio monitors for gigs lol
You know, I misread the SVS PB-1000 specs. Since it is powered and has a Low-pass filter, you won't need a Crossover.
But it is still overly complicated. If you are just using this for desktop applications, where is the Audio signal coming from?
Because if it is just from a PC/Laptop, you are over engineering it for the price and quality of the speakers. I'd suggest scrapping everything, and getting some Powered Studio Monitors with a matching sub. You could run those directly from a PC and not need to worry about a Mixer, or your could go:
PC > Mixer > Sub > L/R Speaker
or
PC > Sub > L/R Speaker
IF you were buying some higher-end audiophile speakers ($1k+ per pair) you'd want to worry about a separate Power Amp, DAC, etc. But for a pair of SVS Primes, you could do better with a pair of larger cones that are powered - E.G. Yamaha HS8s and its matching Sub for $300 less (Assuming you can recoup the cost of the Mixer) or the same price.
But ultimately, it depends on if you are beholden to the SVS Primes. If not, it is just extra cables and an extra power amp module taking up space imho.
You can get the Monoprice 5 inchers which are basically bx5 clones/rebrands. I have them and they sound great.
I'm disappointed by the monoprice sub though, port noise, shitty freq response (doesn't do well below 40 hz). My first one had a hum too and I had to return it to Amazon.