(Part 2) Reddit mentions: The best tablet stands

Here’s my loadout:

First, I like being able to play in tabletop mode as I like having the joycons removed and separated while I play on the go, I carry the straps (though I removed the strap part so it’s just a way to add extra width to the joycons) and this tablet stand because I do like the normal one.

Next up, I use a portable USB-C charger with a PD port on it. I used to use a third party Switch charger since I’m not using it to dock, but I like having the option to charge my phone as well.

Finally, I use a case to carry everything in. The normal slim ones definitely aren’t enough, so I use one like this that fits everything so I can have everything on the go in a compact space.

TLDR: I keep a tablet stand, joycon straps, and a portable charger in a large case for when I’m on the go with my Switch. None of these are must haves, but I enjoy them all.

P.S.
One ESSENTIAL accessory is a screen protector. I got a small scratch on my bezel from my dock and it still bugs me I didn’t get a screen protector immediately. It baffles me that there’d be a design flaw like that, but it happens.

Finally, a lot of people like the Satisfye grips. While I’ve never found them necessary, a lot of people have. It would also be worth getting the bundle with the carrying case since it wouldn’t fit in a normal one.

Hope this helps or gives you some ideas of what you might want.

It's a bit on the pricey side at $39.99 USD

but the fact that it's sturdy, allows charging, and takes up so little space that it should fit in pretty much every Switch case to me makes it a winner.

Runner up was the Arkon Folding Tablet Stand much cheaper, but not quite as sturdy, significantly larger (won't fit in most Switch Cases), and would likely require a right-angled USB C cable to charge while in use.

edit

If the price of the Compass V2 throws you off, the original Compass V1 goes for like 15 bucks on Amazon and it's actually slimmer then the V2 but apparently less sturdy.

edit 2

also there is a cheapo version of it for 10 bucks but I can't attest to its quality. Thanks u/doublespoiler and u/soma04 for the tip.

(Disclaimer: This post assumes no hardware defects with either unit; plenty of people have been reporting problems with the Surface Pro 2017 and the Surface Pen being used together, see this sticky. As far as I know the SB2 doesn't have this issue.)

I'd personally give the edge for drawing to the Surface Pro just for the kickstand. You can kind of get the same thing by reversing the Clipboard and propping up the Book in the same way but it's not quite as stable and takes up more space. Of course since the i5 model doesn't have the dGPU in the base you can just as easily detach the Clipboard and prop it up on something like this. If you typically draw with the tablet flat/near flat on the table though it's a moot point as either will do.

I don't have enough experience typing on the Surface Book to say which is better but I love typing using the Type Cover on my Pro 4. The scissor switch keys have just enough travel, the layout is much better spaced that previous Type Covers, and the magnets holding it at an angle let you choose between the incline or flat orientation (the flat is more comfortable than you'd think). With the Surface Book of course you'll get a more traditional typing experience, including it being much more "lapable".

Finally, if you're willing to drop down to the 128GB SSD on the Book you can actually get it cheaper than the equivalent Surface Pro ($1,199 vs $1,299), whereas with the Pro you'll want to factor in the cost of the Type Cover (pretty much a necessity) which will put it at ~$1,430 USD.

I bought the good one on Amazon if you search "Nintendo Switch Bed Mount" I believe its the $19 one. It is solid and totally enjoyable to play in bed with the joy cons. You can lay in any position and the joy cons make it possible. everyone appreciate the Link https://www.amazon.com/EasyAcc-Nintendo-GooseneckCellphone-Rotating-Flexible/dp/B01J19TE84/ref=sr_1_2?ie=UTF8&qid=1494610050&sr=8-2&keywords=nintendo+switch+bed+mount

I think you could do the same thing with a music stand. You just need to make sure the part you’re clamping on to is thick enough for your clamp.

I don’t see why it wouldn’t work for anything with a straight arm leading up to it.

You could also consider going digital with your sheet music and put it on an iPad and then use something g like this CTA Digital PAD-AFS... https://www.amazon.com/dp/B00HFRYAGQ?ref=ppx_pop_mob_ap_share. I have one to my left of this exact model that I use with my iPad to play the tracks I’m playing along to and it works perfectly.

He is using a tablet behind an MFD with free roccat power grid software created by Third.

MFD: http://www.amazon.com/gp/product/B002HH9TRY/ref=s9_simh_gw_g147_i2_r?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=desktop-1&pf_rd_r=006AKF572XMD36HCCGR7&pf_rd_t=36701&pf_rd_p=2079475242&pf_rd_i=desktop

Free software for tablet: http://www.roccat.org/en-US/Products/Gaming-Software/Power-Grid/Store/Grids/Games/Simulation/553/

For holders you could use something like: http://www.amazon.com/PUREX-Technology-Tablet-swivel-extended/dp/B00D3205WU/ref=pd_sim_147_1?ie=UTF8&dpID=31sPGznq17L&dpSrc=sims&preST=_AC_UL160_SR103%2C160_&refRID=112Q343BKWGJHE6F9KF1

That one is for 7-8.5" tablets. there is a 9-10.5" version as well.

First I would try to as much as possible figure out how to prevent the situation that caused the tablet to break instead of trying to find the perfect armor.

I'm assuming it is not drops and falls breaking the ipads since they still seem to be breaking frequently with good quality cases. But if they do drop them frequently maybe something like this http://www.amazon.com/URGE-Basics-Swivel-Grip-Tablets/dp/B00DZXS8DK

or this

http://www.amazon.com/gp/product/B00BCSYZVY could help.

If they are breaking from being put in book bags and then being thrown around maybe something that covers the screen like this http://www.amazon.com/modulR-Tough-Cover-Accessories-C51-50-M/dp/B00I3YKEKG would work

I think what you are describing is a mounting arm. Amazon carries a few. I linked one that is a clamp mount and one that is a stand style below:

https://www.amazon.com/ChargerCity-Release-Telescopic-Samsung-Microsoft/dp/B00SM4A9D4

https://www.amazon.com/AboveTEK-Heavy-Aluminum-Gooseneck-Holder/dp/B00X8C39J6

If you want to go the DIY route, a Microsoft engineer designed a VESA compatible dock that is pretty cool as well. You will need access to a 3D printer however, but it is a cool concept non the less.

https://blogs.msdn.microsoft.com/danchar/2015/06/30/3-in-1-dock-a-microsoft-garage-project-for-surface-pro-3/

Hope this helps!

Yes - Nexus 7. I use it for lyrics.

I bought the tablet stand on Amazon for $30 - TOTALLY worth it - and it'll hold multiple sizes of tablets.
http://amzn.com/B007PKR3SK

I use LyricPad for lyrics because it scrolls automatically and has some great setlist and song organization features.

1. Apple Pencil, obviously
   
2. super cheap case (this one is for last gen) my iPad lives in here. https://www.amazon.com/dp/B075KB7Y2Y/ref=cm_sw_r_cp_tai_jOITCbPBMGXPX
   
3. Drafting style stand. I am a student and 70% of the time I’m using the device is on this stand. It’s much better for my posture and comfort when using the pencil https://www.amazon.com/dp/B01N9HABDO/ref=cm_sw_r_cp_tai_2QITCbBJ3KZ8Q
   
4. “laptop mode” stand - https://www.amazon.com/dp/B015FH0XKE/ref=cm_sw_r_cp_tai_KRITCbGXYR8WB
   
5. keyboard Anker Ultra Compact Profile Wireless Bluetooth Keyboard for iOS, Android, Windows and Mac with Rechargeable Battery and Aluminum-Effect Finish (White) https://www.amazon.com/dp/B07HFV85FG/ref=cm_sw_r_cp_tai_8MGTCb39G5089
   
6. HDMI and sd card dongles
   
7. Anker fast charger for when you need a quick top up. Use a slow charger when you can https://www.amazon.com/dp/B07H54MKQY/ref=cm_sw_r_cp_tai_pTITCbQ3RRM97
   
   That’s all my accessories.

I have a Plinth which I got from a Kickstarter project - it's not integrated into the case but that means you can use it with any case you like (or no case), and in portrait mode as well as landscape. It didn't work with my 12.9" Pro, but it's brilliant on my 10.5".

I have this one. It’s in my garage for the same size iPad. It works great, is solid/heavy, and easily adjustable. I recommend it.
CTA Digital Height-Adjustable Tablet Floor Stand with Gooseneck and Metal Base for https://www.amazon.com/dp/B00HFRYAGQ

Would love to see what others have found. I've looked a lot and this is the best I've got so far: https://www.amazon.com/gp/product/B01AGYIAZ6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Been using it for a few weeks, mainly to watch shows in bed. It's... not ideal.

The whole thing tends to want to lean over. And I don't think it would work with a case (unless it was a very thin case).

Scratch my comment from earlier, I thought of something different, what about a tablet stand??

Desktop Multi-angle Non-slip Stand Holder For iPad 2 3 4 Air Mini Retina Tablet https://www.amazon.com/dp/B00GRS4IZW/ref=cm_sw_r_other_awd_sGdLwbQEFQECP

I use this exact one for my iPad mini, but I just tested it on my New 3DSXL and it works quite well and has free space for the audio jack. The 3 pieces of metal are rubbercoated and are all adjustable.

Item: Tablet Bed Stand

Manufacturer: Magichold®
https://www.amazon.com/Magichold%C2%AE-Rotating-Adjustable-Bedside-13-15-6/dp/B00JWD6XC0/ref=sr_1_22?ie=UTF8&qid=1466624914&sr=8-22&keywords=tablet+floor+stand

Surface model: compatible with all versions

Price: $80

Makes using the tablet in bed easier and hassel free.

Read Reddit handle: Yes

FYI this one comes with 3 mounts. https://www.amazon.com/gp/product/B00X8C39J6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

One for phone, another for a tablet sideways or the switch or one that is super extend long ways for the switch. Perfect for being suspended and able to charge at the same time.

I use the CRANE Stand Elevate, which is great for either a laptop or a controller. It's customizable in that it can be set up in either a C-shape or Z-shape configuration, with multiple angle adjustments and risers for height extension. In the Z-shape configuration it's a bit more stable, and can hold my Traktor Kontrol S4 in place without any side-to-side play or shaking.

​

It's a bit pricey at $79 on Amazon, but for the build quality it's definitely worth considering.

I love this stand, just a cheap amazon one. Works really well and folds nearly flat for travel.


Adjustable iPad Stand, Tablet... https://www.amazon.com/dp/B07B2WNNB2?ref=ppx_pop_mob_ap_share

Sure, VR keyboard would be nice. Huge waste of dev resourcing though I think. Just get a wireless keyboard and put it on a floating arm of your chair. Add some adhesive backed pads to select keys if the built in nubs aren't large enough for you to identify where you are placing your fingers by feel alone. You can get the pads for a couple dollars at any hardware store.

These are what I have attached to my ED chair. Simple, cheap, wireless mini keyboard mouse combo and a floating adjustable arm. Works perfectly.

keyboard

floating arm

ED chair with floating keyboard

For anyone that might be interested, I picked up this stand back when I had my Nexus 7 (went through 3 with issues, decided to get a refund + wait til Christmas to buy myself a new one.) Works great and it's cheap!

I am trying it now with my iPad Pro 12.9 and the nimbus steelseries it does work, but the buttons need to be mapped better
A is Attack, X is first skill, Y second and B last

Only left control works for movement.
Edit.. still testing as writing

A is attack and if you hold any of the other buttons it will use available skills. I play an elder and it will not heal me if I hold X , but Y will. You will have to test how your class works.

I use a magichold for my ipad, macbook and galaxy tab s3. I had to buy an extra arm for it.

Thanks to this question, playing the game has become much more enjoyable.

You might want to send him this link. That would solve his problem, he just needs something like a mic stand to mount it on. The Dremel question wasn't the brightest, but it's always nice to actually offer a solution.

I got an Amazon basics bluetooth keyboard and it's nice for the money, but too cramped imo, so I'm going to replace it with a Logitech K811 which should be arriving soon. As far as a stand, i got this and think it's good for the price

If you have an iPad, try out this IPad clamp. Pretty easy to clamp to your treadmill and watch Netflix or the hundreds or “virtual runs” that are on YouTube.

I'd argue this one looks even better. That is assuming there's a good place to attach it to like on your headboard.

Link to the Plinth on Amazon

Pocket Adjustable iPad Stand. Non-Slip Stable Support For All iPads, Tablets, iPhones, Cookery Books & More. Travel, Desktop, Office, Kitchen & in Bed! https://www.amazon.co.uk/dp/B00PHD4T1Q/ref=cm_sw_r_cp_apa_EpyMBbG3RJNY1

Love it! Not the first time I've seen someone utilize a banana keeper for a headphone stand lol

I've been struggling to decide between the Banana Keeper or Triple Headphone Stand(Tablet Holder).

​

Source: I stole both the Banana Keeper and the Triple Headphone Stand idea from Z Reviews(Zeos)

Found the American version. I'm pretty sure it's the same one, the joints, arms, and brackets look identical. They probably come from the same factory in China. http://www.amazon.com/LapWorks-Armbot-Tablets-Relaxed-Viewing/dp/B008GMGNBE/ref=sr_1_22?s=pc&ie=UTF8&qid=1453410524&sr=1-22&keywords=tablet+arm

However, the American version costs $100. I bought mine for $30.

This one. Are you using the wireless TKL Filco? Sounds like a sweet setup either way.

The setup:

1. Android phone (GS6) with RetroArch installed off the Google Play store (free). No-intro roms.
   
   
2. USB hub: https://www.amazon.com/gp/product/B00LTHBCNM/
   
   
3. USB controllers: https://www.amazon.com/gp/product/B002B9XB0E/
   
   
4. Stand: https://www.amazon.com/gp/product/B017TU5KMQ/
   
   
5. Headphone splitter: https://www.amazon.com/gp/product/B000067RC4/
   
   EDIT1: these are the RetroArch 'Cores' I run with this setup: NES: Nestopia, SNES: Snes9x, Genesis: Genesis Plus GX, N64: Mupen64Plus, Arcade: MAME, Doom: PrBoom. Enjoy :)
   
   EDIT2: rooting is not required, my phone is not rooted it's stock Android.
   
   EDIT3: this setup is not limited to smartphones. It works on laptops, tablets, or Android TV boxes (e.g. Nexus Player, Mi Box, OUYA, Nvidia Shield, Amazon Fire TV, etc.)
   
   EDIT4: here's a post I've done on my RetroArch config: https://www.reddit.com/r/gaming/comments/54qf9d/finally_found_a_use_for_the_old_nexus_7/d85u1kc

I have the same one (or one by the same OEM, but different branding). It's definitely solid, especially for the price. My only gripe (could be a pro to some) is how sticky the base pad is. Wherever you put it, don't plan on moving it around a lot.

This is the one I bought: https://www.amazon.com/gp/product/B015FH0XKE/

Tablet Stand Multi-Angle, Lamicall Tablet Holder: Desktop Adjustable Dock Cradle Compatible with Tablets such as iPad Air Mini 2 3 4 Pro, Phone XS Max XR X 6 7 8 plus More Tablets (4-13 inch) - Silver https://www.amazon.com/dp/B071K5SPKN/ref=cm_sw_r_cp_api_bCQSBbKJ472D0
Is they one I have. I love it.

I use a different version of this for my iPad and it works great in bed for movies/reading.

Plus, awesome Amazon comments.

I got this tablet stand which works great.

Tablet Stand Multi-Angle, Lamicall Tablet Holder: Desktop Adjustable Dock Cradle Compatible with Tablets Such As iPad Air Mini Pro, Phone XS Max XR X 6 7 8 Plus More Tablets (4-13 Inch) - Silver https://www.amazon.com/dp/B071K5SPKN/ref=cm_sw_r_cp_api_i_UOxNDbYW6ZYZ3

Yeah, I use mine with a cheap version of this (which is no longer available, it looks like) in tabletop mode so I can charge/play at the same time. Using an angled charger with one like this should allow you to get even more possibilities for angles, and of course, you have the upside of not having to worry if you're resting the Switch on your stomach.

Is this the original?

This version) looks like a traditional music stand.

There are already a lot of 7" tablet accessories out that would work well with it. I like the Amazon stand to hold it up like an alarm clock.

Thanks /u/SuperBabyHix, now this is in my Amazon search history.

Was checking amazon for how to get one. One step better: https://www.amazon.com/CTA-Digital-Pedestal-Stand-Holder/dp/B00AQT653G/ref=sr_1_1?ie=UTF8&qid=1467235735&sr=8-1&keywords=toilet+paper+holder+with+ipad+holder

CR-200s are getting pretty old and are prone to several common failures so it would be a risky move. If you have it hopefully you can deal with the tiny screen, we had to use a stylus on ours, no regrets the day it blew smoke and died.

I went for a bit more expensive Android tablet, looking for longer support times. I picked up a Samsung that was on sale at Costco. It is an excellent option with a 7" screen, big enough for our fat fingers and blurry eyes.

Added a stand and a magnetic power cable and it is easily portable or left sitting as a Sonos status display.

Stand - https://smile.amazon.com/dp/B01IJ5A2UA/?coliid=I2RZW1E4PZNI1J&colid=1M1MHCPFXSKHP&psc=1&ref_=lv_ov_lig_dp_it

Magnetic power cable - https://smile.amazon.com/dp/B073JGNB1P/?coliid=I28308PEHYHB40&colid=1M1MHCPFXSKHP&ref_=lv_ov_lig_dp_it&th=1

https://www.amazon.com/Adjustable-Tablet-Holders-Stands-Nintendo/dp/B07B2WNNB2/ref=sr_1_13?ie=UTF8&qid=1549325693&sr=8-13&keywords=tablet+stand

This looks like the opening is big enough. If it isn't though - there are others that are larger.

Something like this? It looks as though it will fold relatively flat and has multiple swivel directions.

I bought a very similar item last week:

https://www.amazon.ca/MoKo-Universal-Foldable-Multi-angle-Smartphone/dp/B017TU5KMQ/

If OP posted this a week sooner he could have saved me $9. OP's design is slimmer, though.

For those interested in the USA, OP is providing a UK link. Here is the same one.

Looks like this one:

https://www.amazon.com/Tablet-Stand-Multi-Angle-Lamicall-Holder/dp/B071K5SPKN

I have one of these and use it while eating lunch at work. I like it becuase I can use with my ereader or ipad. And I can tilt it up or down depending on how I’m sitting or if I need to tilt away from glare. https://smile.amazon.com/gp/product/B071K5SPKN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

The setup:

1. Android phone (GS6) with RetroArch installed off the Google Play store (free). No-intro roms.
   
   
2. USB hub: https://www.amazon.com/gp/product/B00LTHBCNM/
   
   
3. USB controllers: https://www.amazon.com/gp/product/B002B9XB0E/
   
   
4. Stand: https://www.amazon.com/gp/product/B017TU5KMQ/
   
   
5. Headphone splitter: https://www.amazon.com/gp/product/B000067RC4/
   

For those looking for a similar (more versatile but less pretty) stand, I've been eyeing the iKross 2-in-1 Kitchen Wall / Counter Top Desktop Mount Stand. Other pros: a few bucks less than the iPad stand, and ships to US.

I'll be getting one soon, and I'll post about it when I do.

I haven't come across a good case yet that does portrait mode so I ordered a folding stand like this - https://www.amazon.com/gp/product/B017TU5KMQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

I couldn’t find anything that is more than a simple tablet stand. There is a belkin one that’s nice but it has a lightning charger for the older gen ipads.

This is the closest I could find but it doesn’t have a built in usb-c charger

It's a tablet FLOOR stand. I put it on the floor in front of my bike and it has a flexible neck that I bend over the wheel to be closer to my face.

Standzout Standzfree 48" Universal Pro Tablet Floor Stand, Black (AI-16-001B) https://www.amazon.com/dp/B01AZZHNQI/ref=cm_sw_r_other_apa_eUa9Bb6WX7S3D

CTA Digital Height-Adjustable Tablet Floor Stand with Gooseneck and Metal Base for 7-13’’ Tablets, including 12.9-inch iPad Pro, 11-inch iPad Pro, iPad (2017), iPad mini, iPad Pro 12.9, Surface Pro 4 https://www.amazon.com/dp/B00HFRYAGQ/ref=cm_sw_r_other_apa_9Ua9BbNS0GKGB

It’s from Amazon:


Kitchen Tablet Mount Stand iKross 2-in-1 Kitchen Wall/CounterTop Desktop Mount Recipe Holder Stand for 7 to 13 Inch Tablet fits 2017 iPad Pro 12.9/9.7 / Air/Mini, Surface Pro, Nintendo Switch https://www.amazon.com/dp/B01AGYIAZ6/ref=cm_sw_r_cp_api_i_rFhzDbZR5Q53Y

It’s really lightweight and if you put a book under it’ll be even with the laptop screen.

iPad Pro Stand, OMOTON Multi-Angle Aluminum Stand, with Portable Adjustable Charging Dock for iPad Pro 12.9 9.7 inch, iPad Air, Samsung Tablet etc, Solid Durable Holder and Minimalist Design, Silver https://www.amazon.com/dp/B015FH0XKE/ref=cm_sw_r_cp_api_jMTZxbW8SQEN4

[Amazon] ( https://www.amazon.com/gp/aw/d/B00AQT653G/ref=mp_s_a_1_4?ie=UTF8&qid=1493083114&sr=8-4&pi=AC_SX236_SY340_QL65&keywords=tablet+holder+for+bathroom&dpPl=1&dpID=31VfUTy1y8L&ref=plSrch)

Similar for US

It's real btw. http://amzn.com/B00AQT653G

http://amzn.com/B00D3205WU

Source

The product must have an actual link to purchase.

I just use this: https://www.amazon.com/dp/B07B2WNNB2/ref=cm_sw_r_cp_apa_9oLTBbDNN1GH2

These types of stands normally go on sale, so just keep an eye out. I got mine for $5 and use it all the time!

I use this little stand for mine.
https://www.amazon.com/Twelve-South-Compass-silver-display/dp/B00IF4OL44

Here is the Macbook Pro Dock, and iPad Pro Dock.

this, or grab a 10 dollar phone stand and put it on your desk.
https://www.amazon.ca/MoKo-Universal-Foldable-Multi-angle-Smartphone/dp/B017TU5KMQ?ref_=fsclp_pl_dp_3

Ordered some additional accessories that I already think are must haves.

At the recommendation on another thread, this gooseneck clip https://www.amazon.com/Gooseneck-Tablet-Holder-Lamicall-Stand/dp/B07GQNRQ86

A desktop stand. https://www.amazon.com/Tablet-Stand-Multi-Angle-Lamicall-Holder/dp/B071K5SPKN

Desk Top,
Alex Drawers,
Desk lamp,
Camera Lense Mug,
Fake Plant,
Monitor,
Apple magic keyboard 1st gen,
Logitech G602 Mouse,
Phone Stand,
Lucario and greninja on the monitor stand!

Arkon Heavy Duty Tablet Clamp Mount with 12 inch Neck for iPad Pro iPad Air Galaxy Note 10.1 Retail Black https://www.amazon.co.uk/dp/B00BCSYZVY/ref=cm_sw_r_cp_api_.rJ.ybJABFRZT

I use one of these and just keep it on a cabinet shelf at about eye level. It does require leaving a cabinet door open though.

Here

With one of these: http://www.amazon.com/CTA-Digital-Pedestal-Stand-Holder/dp/B00AQT653G

And, it's on sale on Amazon.com! http://www.amazon.com/dp/B00AQT653G/ref=gb1h_tit_c-3_8122_628461e9?smid=ATVPDKIKX0DER&pf_rd_m=ATVPDKIKX0DER&pf_rd_t=701&pf_rd_s=center-new-3&pf_rd_r=15VJF5B2EKK55T651X3J&pf_rd_i=20&pf_rd_p=1729088122

Why not just buy this

Adjustable iPad Stand, Tablet Stand Holders, Cell Phone Stands, iPhone Stand, Nintendo Switch Stand, iPad Pro Stand, iPad Mini Stands and Holders for https://www.amazon.com/dp/B07B2WNNB2?ref=yo_pop_ma_swf

Hier für Erwachsene mit Klopapierhalter

I think there is really only one option here: Install a dedicated tablet for the bathroom configured for that one access point.

Sorry for the small gif. No idea how you can make that larger from the source.

http://www.amazon.com/dp/B00AQT653G