Reddit mentions: The best tool bags

2015! I am so ready and looking forword to moving into a new apartment with the love of my life and my fiance (one in the same. lol!) and also being able to do some work on my truck if this job goes threw. :D

and Im really not sure what (if I were to win) I would like, but this http://www.amazon.com/dp/B00775COIW/ref=wl_it_dp_o_pd_S_ttl?_encoding=UTF8&colid=2Z3DKIOGKDBRA&coliid=IXBZME93SPYNE would be great. :)

Thanks for having the contest, and good luck to everyone!

that's a pretty legit list right there. I have a trunk full of gear, probably worth almost as much as my car. I do a lot of contract work, so my list is pretty much the same just slightly beefed up.

• I have a basic tech kit from Amazon
  
• I have a buttset Sometimes reffered to as a linemans set.
  
• About 10 of these Floating around my car/trunk/tool bags and person. because i like to lose things lol
  
• A Basic cable tester
  
• This Cable mapper
  
• Coax crimper (For tv, and bnc)
  
• Crimp Kit
  
• I buy these Like candy, they're perfect for ISO's for giving to customers with instructions and/or iso's just perfect in general for a lot of things.
  
• Stinger Flash light Serves double duty as a i'm a volunteer first and second responder
  
• Cable stripper
  
  Replenishables
  
  
• I Keep at least 50 of these on hand
  
• rg59 tips (CCTV BNC Tips)
  
• RG6 tips (Cable TV)
  
• RJ45 tips (A mason jar filled with about 60-100)
  
• at minimum of box of cat5 Sometimes up to three boxes. i will have a job soon that will require six of them lol.
  
• Patch Cables 3f and 5ft usually at minimum 10 of each
  
• zip ties (Usually three containers of 500 of assorted sizes)
  
• White 2 4 and 6 port keystone faceplates
  
• White keystone blanks
  
• low voltage mounting brackets
  
• white 1 and 2 port surface mount boxes
  
• some hdmi cables (Usually just 4 or 5 of these)
  
• electrical tape (5 50' rolls of different color) for many things
  
• Pull string
  
• dikes (Not really but they dissappear so fast they feel like it) like These
  
• I actually keep two label makers
  
• Rolls of 8 inch velcro ties
  
  contractor things
  
  
• Step bits
  
• Paddle bits
  
• Hole Saw Kit
  
• Masonry bits
  
• Caulk gun
  
• caulk
  
• grommets
  
• Ladder
  
• First aid kit
  
• 150' Fish tape
  
• An 18V Cordless DeWalt Hammer Drill
  
• Regular drill bits
  
  
  
• I use these to organize my laptop bag (win surface pro with usb to rj45 adapter, usb to db9 adapter, console cable, lan cable, wifi hotspot, anker battery pack, 500gb usb hard drive etc)
  
• I use these bags to organize everything
  
  and a myriad of other small parts pertaining to surveillance system installs, and screw bits for my drill, and i even have secured walkies for when i have multiple employees on site. plus i have to admit bluetooth headsets for when i have to deal with helpdesks or tech support while i'm on site... did i mention i do a lottttt of contract work. i'm all over the place. every now and then i run into things that this kit can't handle but for the most part i come away with a rather professional look.
  
  sorry for formatting, i've seen plenty of these posts this is the first time i took time to actually look up evrything i've purchased.
  
  Edit: Some formatting. added velcro :P

For Tone gen, Fluke makes the gold standard. They also have a cheaper version.
You didn't mention a probe, so maybe you are looking for a cable certifier?. That's super expensive though. if you just have to test that there is continuity and not certify the cables, you can use this, or this if you want to look like a pro.

As for Screwdrivers, Wiha makes the best screw drivers, hands down. I have this set for working on electronics & laptop repair. Magnetic tool-kits are fine. This isn't the 80's anymore. There aren't too many magnetically sensitive items inside a computer anymore. especially with the advent of SSD drives.

As for a toolbox, depending the work, I prefer a tool bag or pouch.

Good luck, hope that helps. What helped for me when I started was to go to harbor freight and just get an assortment of tools. As I worked I slowly replaced the stuff I used all the time with quality gear, and didn't have to burn myself buying expensive tools and gear that I would never use.

If you are driving alot of screws get a good driver with Torx or square bits. Phillips or flat head screws should be outlawed.

I have tons of 18 volt tools. But 90% of the time I use my 12 volt stuff. It is lighter and plenty strong enough for most all jobs I throw at it.

https://www.amazon.com/Milwaukee-Electric-Tools-2598-22-Hammer/dp/B077ZXR2GN/ref=sr_1_3?keywords=milwaukee+m12+fuel&qid=1563798041&s=gateway&sr=8-3

​

Get a good tool bag, To keep all your tools organized.

https://www.amazon.com/DEWALT-DG5543-Inch-Tradesmans-Tool/dp/B001P30BO6/ref=sr_1_3?keywords=dewalt+tool+bag&qid=1563036747&s=gateway&sr=8-3

​

This little screwdriver is my most used electrical tool.

It will take off a faceplate in seconds without scratching it.

https://www.amazon.com/Interchangeable-Screwdriver-Klein-Tools-67100/dp/B003FC75YE/ref=sr_1_7?keywords=klien+screwdriver+fast&qid=1563037724&s=gateway&sr=8-7

​

This works great also.

https://www.amazon.com/Milwaukee-9-IN-1-RATCHET-BIT-DRIVR/dp/B07N2XRJKN/ref=sr_1_5?crid=3S4QWUWTNOHH0&keywords=milwaukee+ratchet+screwdriver&qid=1563797885&s=gateway&sprefix=milwauke+ratchet+%2Caps%2C216&sr=8-5

​

These work great as stud finders, not sure how they build your houses but in america we have 2x4 wooden studs behind our walls every 16-24". This is a strong magnet that finds the studs by finding the screws that attach the drywall to the wooden studs.

​

https://www.amazon.com/gp/product/B000IKK0OI/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

​

If you are moving any water lines or doing any plumbing look in to Pex, It is very easy to do and you can same alot of plumbing costs.

https://www.amazon.com/IWISS-Crimping-Crimper-Stainless-Clamps/dp/B019DPYQZM/ref=sr_1_4?crid=LGQIZBR2PEXY&keywords=pex+crimping+tool&qid=1563798123&s=gateway&sprefix=pex+crimp%2Caps%2C201&sr=8-4

​

If you are moving your toilet, look in to a wall mount. They are very modern and save you a lot of room.

Prying tools, a nice screwdriver, small spatulas a grounding bracelet and a nice case. $50? Fuck no.

this is just ok. For $60 you can get your self your last toolkit. This is the center piece the last screw driver set you will ever buy: http://www.amazon.com/gp/product/B008HYVG6I/ref=ox_sc_act_title_4?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

pry tools aren't common but they diabolically cheap: http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR12.TRC2.A0.H0.Xpry+tools&_nkw=pry+tools&_sacat=0

grounding bracelets are $5 bucks across the board, and you can get a nice bag for all your tools.

http://www.amazon.com/gp/product/B000BFNJES/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A37XNGS4WH2DDR

If you are barely starting gearing up throw in, a wire stripper, a soldering iron with 21G solder, flux, a pump and solder remover.

Some time down the road, throw in an internet cable crimper some internet cable connectors and have the power of fixing any cable at any lan party.

Throw in a magnetic nut and bolt tray, spare 21g wire and your set for life.

If you want you can add, a small axe, flashlight, a pack of batteries, quarter bottle of vodka, and a magnesium rod. It will bring the cost to like $150 2014 dollars but this set will make you the most popular kid in the fallout and will guarantee unlimited bottle caps.

Great point. I've been going through my bag a bit and reorganizing things. I've found that just by shifting things around, I can alter how the bag carries overall and can reduce bulk simply by organizing better.

I've been looking at some Maxpedition pouches that might be helpful in this area like the E.D.C Pocket ORganizer or a couple Custom Leathercraft bags or something more like the Eagle Creek Half Cube or a Quarter Cube.

Right now I just have a couple cheap Cumberland Concepts Zipper Bags from Walmart, but they work ok in a pinch and are something like $2-3 bucks each. When I get the chance I'm planning to upgrade, but haven't gotten there yet.

As for specific delicate items, Primarily, I have a Fenix L2D flashlight I don't want too smashed up, as well as a couple chargers I don't want too heavily banged around. I also occasionally carry around a DS Lite which has it's own case but shouldn't ride at the bottom of any pack.

I use this one as I travel to and from any type of jobsite doing any number of tasks (I literally have every hand tool you could find yourself needing in this bag, it took me months of organizing, adding/removing tools to optimize it):

Veto Pro Pac TECH PAC Service Technician Bag, 1-Pack https://www.amazon.com/dp/B00DYQLXHG/ref=cm_sw_r_cp_taa_0q26BbJFDTE9X

However, my brother who is regularly based at one jobsite for several months at a time finds this (half the size) to be more than adequate:

VETO PRO PAC TECH-MCT Tool Bag https://www.amazon.com/dp/B01CENNFYS/ref=cm_sw_r_cp_taa_Dr26Bb2DHX1HK

Expensive? Yes. The best quality? Without a doubt.

I've had mine for two years and it looks the same as when I purchased having wiped off the dirt.

That's pretty much my daily carry.

Some other things I'd suggest:

• Phillips, flat and torx screw drivers or driver bits (various sizes)
  
• Crossover cable (short as possible) and Female-Female RJ45 inline coupler - make any cable crossover!
  
• Pocket-sized router/AP like this: http://www.tp-link.com/en/products/details/?model=TL-WR710N
  
• Velcro for cable ties
  
• DVI/VGA, VGA/DVI adapters
  
• Large (500gb) USB3 external drive. Got a nice one from work which I think was a Samsung - very small and fast
  
  My bigger toolbag has more specialised tools:
  
  
• Network crimping tool, connector crimping tool
  
• Punchdown tool
  
• Basic cable tester tool, network toner and probe
  
• Wire snips, wire stripper
  
• Pliers, adjustable spanner, locking wrench
  
• Allen wrench tools (metric, imperial and torx - Bondhus GorillaGrip brand)
  
• Battery powered soldering iron, solder
  
• Multimeter
  
• Batteries of all sorts (AA, AAA, adapter for C, 9V, charger for AA/AAA)
  
• 10M and 3M Cat6 straight cables with connectors, 10M Cat6 without connectors, box of Cat5 and Cat6A connectors and boots
  
• SC-SC, LC-LC, SC-LC patch cables, SC-SC connector, LC-LC connector
  
• GLC-T, GLC-SX-MM gbics
  
• Very short C5, C7, C13 cables
  
• 1.5M and 5M power extension cables
  
• Power cord splitter (much, much better than a power board since you can always use every connector)
  
• SDXC/SDHC SD, miniSD, microSD, CF USB card reader
  
• "Twin" network cable and inline couplers (instructions)
  
• "Multi-cable" - http://www.instructables.com/id/5%2b%2b-in-1-Multi-Cable/
  
• Box of random useful screws
  
• Box of M5 and M6 cage nuts, cage nut tool
  
• Various tape (double sided, masking, easy remove, duct, electrical etc)
  
• Non-contact infrared thermometer

I got these https://www.amazon.com/gp/product/B0002YVBC0/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

They hold a variety of different things. I use the biggest one to hold documents/personal items. It holds my checkbook, some stamps, some envelopes, misc cards that I need for work. The medium sized ones holds my electronic stuff - cables, flash drives, extra batteries, battery pack. The smallest I keep snacks in - gum and mints/cough drops.

I also use this to keep documents in.
https://www.amazon.com/Eagle-Creek-Pack-Black-Large/dp/B00F9S8RRG/ref=sr_1_30?ie=UTF8&qid=1488308081&sr=8-30&keywords=pack+it+eagle+creek

I spent less than 20 for everything, and they may not be as nice as the Tom Bihn stuff, but it is perfectly functional. I got everything for a 1/3rd of the Tom Bihn stuff. It all works great with the O-rings in the bag.

Let me know if you find any accessories that work. I am always looking at Tom Bihn alternatives.

I have a small problem in that I like a lot of different kids of bags for various things. It's not just that either. I like a nice and well made leather messenger bag, too.

What really matters though is durability and utility. I've had a Spire Endo messenger bag that I've had for 8+ years and it still appears nearly new. I do take care of it but not much. My coworker has the same bag and the only part that's worn on his is the shoulder pad.

http://www.spire-bags.com/laptop_bags.php

I've put massive weight into this thing and it holds it. It's fairly water resistant. No rips or tears. You can ride a bike with it (waist strap). It'll attach to a roller suitcase. It can hold a water bottle. You can zip things away into deep pockets that pick-pockets are unlikely to get into.

However, this is not a tool bag which is what I see a lot of people talking about. Still, I thought I'd mention it. Part of me wants a new bag but I can't justify spending more money when I have a perfectly nice and nearly new one still.

EDIT: I almost forgot, my toolbag of choice is this CLC bag with side zip open pockets. It's big though, which means heavy when loaded with tools. However, I also use a collapsable hand cart or 4 wheel dolly to get in and out of buildings when I have boxes of cable and other supplies.
http://www.amazon.com/Custom-LeatherCraft-1539-Multi-Compartment-Carrier/dp/B000EDTSZG/ref=sr_1_4?ie=UTF8&qid=1458743396&sr=8-4&keywords=clc+bag

Thanks! Interesting price range. We have...

• The Harbor Freight canvas bag ($10.50) and tool tote ($13). At the price I might try both!
  
• The $10 bucket organizer, best # of pockets per dollar
  
• The $40 Husky tool bag, lots of inside pockets
  
• Similar to the above, Custom Leathercraft sells an 11in square electrician's tote for $45
  
• The $180 Veto Tech OT-MC. Definitely looks the part.

I like being a guy because of communication.

I'm usually fairly straightforward, while my wife has a thousand ways to say "No."

There's only 2 items I want right now, both for my TF2 Engineer Cosplay!

Gloves

Toolbelt -- It's a little over with shipping, but it'd be awesome to have! :D

Thank you so much for this contest!

I currently use this Custom Leathercraft, right now I do general on site Tech, but it works great for me. Larger items fit easily in the center.

I bought this Klein tool bag for my hand tools and it's great. And when I picked up a WD 4TB External, I grabbed this case to go with it. Keep all my flash drives with it.

This is a selection of what I keep in my tech go-bag. You'll build your kit as you learn and build experience, or realize you could have helped a customer out of a jam quicker if you had that tool with you.

• cheap flashlights you wont feel bad about leaving in a ceiling or inside a rack: https://www.amazon.com/Magnetic-Lights-Super-Bright-White/dp/B00I45JKTA/
  
  
• torx screwdriver for lots of little devices. I have a similar set and it's pretty decent: https://www.amazon.com/Vastar-Magnetic-Precision-Screwdriver-Electronics/dp/B015F734P0/
  
  
• power supply tester
  
  
• rechargable canned air
  
  
• zip ties
  
  
• velcro: https://www.amazon.com/iMBAPrice-Cable-Fastening-Tape-Yards/dp/B00FT2WHO6/
  
  
• leatherman/gerber multi-tool (needlenose) convenient when you need to do something quick and you don't have your bag with you.
  
  
• Set of pliers/wire cutters (leave the chanel locks at home): https://www.amazon.com/Tools-VISE-GRIP-4-Piece-Traditional-2078707/dp/B000CFMCTK/
  
  
• sharpies
  
  
• electrical tape: the good kind not the cheapo stuff
  
  
• multi-screwdriver: https://www.amazon.com/Lenox-Tools-23932-Multi-Tool-Driver/dp/B0013NX2DA/
  
  
• cordless electric screwdriver if you have lots of screwing to do.
  
  
• razor knife: https://www.amazon.com/Gerber-Lite-Pocket-Knife-31-000345/dp/B002RILCLY/
  
  
• cable tester/tone generator: https://www.amazon.com/ELEGIANT-Multifunction-Tracker-Measuring-Instrument/dp/B01HCQSHNG/
  
  
• analog phone for testing phone lines: https://www.amazon.com/Saytay-Telephone-Lineman-Tester-Connectors/dp/B01ABT7458/
  
  
• punch down tool: https://www.amazon.com/TRENDnet-Punch-Krone-Blade-TC-PDT/dp/B0000AZK4D/
  
  
• cable crimper: https://www.amazon.com/TRENDnet-RJ-45-RJ-12-RJ-11-TC-CT68/dp/B0000AZK4G/
  
  Various extra parts I've accumulated over the years like screws, ATX Molex Power to SATA Power Adapters, ATX Molex Y splitters, SATA cables etc..
  
  Good luck and some tools overlap like multi tools and pliers so if budget is low, go with the tool that covers the most jobs.
  
  Edit: I noticed your bag is kind of expensive compared to something like a Dewalt tool bag. I use a plain Dewalt bag which is not as cool as the one in the link, but it's just as tough. This might be a good and less expensive consideration for you if you don't require the look of a briefcase for your tool bag.
  
  Edit 2: You may want to mark your tools with a wrap of some crazy bright color electrical tape to be able to recognize them when they walk away.
  
  
  

DEWALT Tool bag: best materials and construction for the price (really it's the best durability i've seen at any price) of $46. Plenty of room and pockets, plus everyone thinks it's just full of tools. Holds it's shape better than most range bags i've handled.

http://www.amazon.com/DEWALT-DG5553-18-Inch-Contractors-Closed-top/dp/B001P30BOQ

The smaller bag is even cheaper @ $30.

Hello Mr. Wolf(?),

I just tried putting the shoulder strap of my netbook bag through the handle to see what that was like. It was not very comfortable for me, and difficult to remove. It might be different for something with a longer strap, though. Another possibility might be to ship with two shoulder straps and do this.

The design that I've liked the best of those I've seen and used so far is where the backpack straps go into a pocket on the back when not in use. An example can be found in this bag by STM.

When they first came out, I bought a few GRID-IT pallets but did not end up using them because they were very inefficient to store things with their random arrangement of straps—it was likely playing a game of Tetris trying to figure out how to organize things. It might be different if the straps were laid out in a regular grid, though. What I was thinking along the lines of was more like the tool pockets in this or this backpack, except in a more conventional tool pallet form that could be fastened into the backpack. Oh, zippers would work as well for that, too.

Regards,

Aryeh Goretsky

I've been using the Custom Leathercraft 1537 for a while now and I love it. It's pretty small but you can fit all your necessities in it easiliy without it getting ridiculous heavy. I keep all my larger items like powertools, battery charger, etc in my backpack which i can leave in one place on site while I carry the toolbag around. The larger variant is the 1539 which seems to beastly to be carrying around w/o wheels

I like the rothco bags you can get on amazon.

They're cheap, and unlike the HF "voyager" bags they are pretty well made, cotton canvas with thick zippers. I much prefer cotton, way more durable than the thin nylon and won't separate at the seams. I've been using this one for my work tools for ages and it's not ripped at all. Plus you can throw them in the wash to clean them.

The all leather Occidental pouch. Some cons I can think of are that it's expensive and leather is heavier than synthetic. The belt could be a little more comfortable, but it's just a leather, non padded belt. It doesn't have a really good spot for a torpedo level. The pocket I keep it in is not deep enough. It fits well enough, but it could be redesigned. On the plus side, it's going to last my entire career. Tools never fall out. It's stiff as a board when you first get it. Put your tools in with some oil on the pouch, and it really molds to them. Up and down ladders, in crawl spaces, tossing it on a cart, my tools never fall out. This, however, has a slight con where you don't really want to move tools around since the pouch does mold to them. That doesn't bother me. I will obviously replace tools, but they're always going to go in the same pocket.

TLDR: fucking nice pouch. Worth every penny.

Superior tool basin buddy

https://smile.amazon.com/Superior-Tool-03825-Wrench-Wrench-coupling/dp/B007BI7IJA/ref=sr_1_4?crid=3MVMO3N7DDBT7&keywords=superior+tool&qid=1568886959&sprefix=superior+tool%2Caps%2C130&sr=8-4

1/4 dive socket set up to 9/16 or the metric equivalent plus extensions

https://smile.amazon.com/TEKTON-4-Inch-6-Point-Ratchet-32-Inch/dp/B07P7WMK4L/ref=sr_1_4?crid=3LFRNNYLLK74W&keywords=1%2F4+drive+socket+set&qid=1568887157&sprefix=1%2F4+drive+%2Caps%2C132&sr=8-4

Tool bag ( may as well start thinking about having more then one )

https://smile.amazon.com/DEWALT-DGL573-Lighted-Technicians-Tool/dp/B00QNTVV6Y/ref=sr_1_4?crid=9LFYMX8PWTBT&keywords=dewalt+tool+bag&qid=1568887426&sprefix=dewalt+tool%2Caps%2C134&sr=8-4

I really like that tool bag, use an old tool bag for spare / rare tools

I have an entire set of Paladin network tools, as well as a leatherman type of hand tool and I can honestly say I love it for the price.

As far as general hardware goes, I'd check craftsman. I have a universal screwdriver set, T4-T8 bits and such, needlenose pliers, etc all fitting in with my fluke tools in one of these bad boys:
http://www.amazon.com/Custom-LeatherCraft-1539-Multi-Compartment-Carrier/dp/B000EDTSZG/ref=wl_it_dp_o_npd?ie=UTF8&coliid=I38JGLLY8GBCQL&colid=30HENH6XEBY2J

This is the exact kind of thing I put together for my friend on his birthday.

My wife and I got him this bag since it would be easy to pick up and go, or stash inside another travel bag:

http://www.amazon.com/G-I-Style-Mechanics-Tool-Bag/dp/B000BFNJES/ref=pd_sim_hi_8?ie=UTF8&refRID=0H02CHYN7SKDX5T2NGDD

And filled it with

Monopoly Deal

Sushi Go

Citadels

Unnatural Selection

Ogre Pocket Edition

He also got Zombie Fluxx from a friend.

Here's all of my dirty stuff. I go to uni where (I think) I'm majoring in Mech engineering but I also enjoy money so I part time at the family farm where I drive and fix tractors, do a bunch of small jobs here and there, and redistribute vehicle parts I get from junk yards across the world via eBay.


If you're dying to know what anything is beyond my descriptions in the photos, write me a letter.

oh, and I'm also in the market for a nice tool backpack (thinking of getting this one) so if you have any recommendations, hit me up.

Dunno what your need is for organisation, but this bag could help. Very usefull and holds a lot of stuff like pliers and tools that take a little more space.

https://www.amazon.ca/gp/aw/d/B001P30BOQ/ref=mp_s_a_1_7?ie=UTF8&qid=1511720220&sr=8-7&pi=AC_SX236_SY340_FMwebp_QL65&keywords=dewalt+bag&dpPl=1&dpID=41W9P5NegfL &ref=plSrch

Bought on Amazon.

Has a pocket for manual in the lid, semi-hard case. Absolutely perfect fit for the cano and supplies.

Edit: also has a shoulder strap.

You'll need both depending on what you're doing. An impact driver is for rough carpentry like screwing 2x4s together. Or putting together a bed or ikea furniture. You would be crazy to use it on an outlet replacement or to put a handle on a piece of furniture. Or really anything delicate like a decorative light fixture.

For tool storage i like big bags and boxes for the bigger stuff. Then something like this for hand tools: http://www.amazon.com/gp/aw/d/B0000DYVHS/ref=mp_s_a_1_2?qid=1451398155&sr=1-2&refinements=p_n_feature_keywords_browse-bin%3A2797707011&pi=SY200_QL40

I actually got it from Canadian Amazon.

I'm not sure who made the actual bag because I saw many tradesmen at work using it, but they're all branded Kuny, which is Canadian. Home Depot in my city doesn't seem to carry that bag anymore, so I had to resort to ordering from Amazon.

Here it is on American Amazon for Americans interested.

Super green, 0 hours IBEW Inside Wireman apprentice. This is what I've got to show up with for my first day. I have an Occidental Leather Adjust to Fit 9596 tool belt and Stronghold Light 1546 suspenders in the mail, as well as a Custom Leathercraft Tool Box , Thorogood American Heritage Emperor Toe Wedge work boots , and maxiflex cut resistant gloves . I'm still undecided as to which tester/multimeter to get. Am I good to show up to work with what I've got? Am I missing anything critical?

​

Reposted to get image thumbnail

I have a Ono laptop bag and a legal box with folder separators that can organize all my cables and my equipment. This is the smallest setup I have come up with and is easy to pull out of my truck. I also have this bag for my more advanced tools and small pieces.

Custom Leathercraft Custom LeatherCraft 1529 16-Pocket, 16-Inch Center Tray Tool Bag https://smile.amazon.com/dp/B0001ZI4K2/ref=cm_sw_r_cp_apa_.2I7BbCKF3ST5

i have been using these for a few years and they work great.
Mechanics Tool Bag $12.99 11'' x 7'' x 6''

Jumbo Mechanics Tool Bag / Duffle Bag $22.09 17 1/2" x 9 1/2" x 6 1/2"
Edit: to space them out

I bought a Rothco ammo bag from Amazon and it works really well for 1 headset, logs, and iPad. I'd imagine a larger size might do the trick. I think mine was like 13 bucks when I got it.

Edit: Actually the Mechanics Bag, not Ammo Bag

I take a tool bag in the plane and I always put the tool back in the bag and never leave them laying elsewhere. Tool inventory before going in and after leaving will help like /u/ruminatingroy said.

http://www.amazon.com/gp/product/B000EDTSYW?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 This is the one a got. Had it for only six months and it's held up perfectly so far.

I love this bag for tools when needed...

https://www.amazon.com/gp/product/B0001ZI4K2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

I'm a huge fan of the Husky Tool bags Veto tool bag and the Kline Tools Backpack.

This bag works great for making the Volcano portable.

Take a look at this.

VETO PRO PAC TECH-MCT Tool Bag https://www.amazon.com/dp/B01CENNFYS/ref=cm_sw_r_cp_api_DHQXBbRMZGE7Q

But if he is an awesome uncle get him this.

VETO PRO PAC Tech Pac LT Tool Bag https://www.amazon.com/dp/B00WZLTCHO/ref=cm_sw_r_cp_api_WJQXBb8ZC8NN6

Throw things into a heavy duty contractor tool bag. Put everything back once you're done.

https://www.amazon.com/dp/B001P30BO6/ref=psdc_553578_t3_B0006JO2CM

Edit: Brand doesn't matter here. Mine's a Husky that's still in great shape after 10 years.

• Laptop
  
  
• Logitech MX Rechargeable Bluetooth Mouse
  
• Communication Cables (USB Serial Converter, DB9 Gender Changers, AB Cables, Ethernet of various sizes, RJ45 Coupler, etc.)
  
• Wiha SlimLine Kit
  
• Fluke 789 Processmeter
  
• Test lead Kit
  
• Voltage Sniffer
  
• 5-Port Switch
  
• Wire Stripers
  
• Wiha Dikes
  
• Needle Nose
  
• Fold-up Allen Wrench
  
• Klein Tool Bag
  
• Swiss Army Backback
  
• Electrical Tape, Fuses for Field Install and Multimeter Spares, Surge Protector, USB Drives with Automation Software, Fold-up TV Dinner Table, Fold-up Chair with Cushion, Notebook, Business Cards, Pens, Sharpies, Phone, Hardhat w/ Headlamp, Safety Glasses, Electrically Insulated Steel Toed Boots.
  
  
  
  This is setup is mainly for project startups and it would probably change if I was in more of a service engineer role.

This one is compact and pretty sturdy:
https://smile.amazon.com/gp/product/B000BFJE8S/
I use mine for T&M equipment

I wanted one that closed completely and got this: https://smile.amazon.com/Custom-LeatherCraft-1539-Multi-Compartment-Carrier/dp/B000EDTSZG?ie=UTF8&colid=1BA4GBUZ6Q3IW&coliid=I3DU78ADDZS3Y&ref_=wl_it_dp_o_pC_nS_ttl

I love it, really sturdy and easy to use.

https://www.amazon.com/gp/product/B000EDTSZG very fond of this one. Great build quality.

It's not a box but I highly recommend this bag. It has more than enough room for tools + product/parts for most situations. I can't believe how well it's held up for me.
http://www.amazon.com/gp/product/B0047O3PFC?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00

https://www.amazon.com/Electrician-Tradesman-Klein-Tools-55421BP-14/dp/B00MK9UY0A/?crid=2MDIDFX26A56H&keywords=backpack+tool+bag&qid=1566228912&s=gateway&sprefix=backpack+tool%2Caps%2C152&sr=8-3

IF you work in a factory environment, this thing is great... Only wish they would make one with a hardened laptop area.

Good budget tool backpack

Custom LeatherCraft 1132 75-Pocket Tool Backpack https://www.amazon.com/dp/B0000DYVCY/ref=cm_sw_r_sms_c_api_xJaTzb3EA6NZP

I checked shipping options for this Amazon-sold toolbag and I still get both "AmazonGlobal Expedited" and "AmazonGlobal Priority" as options (plus even cheaper "Standard International" for media items) for Finland.

Which country are you in?

I'd guess (a) the carrier Amazon used for Expedited into your country (they use Landmark Global to Finland) no longer operates there, or (b) they raised their prices too much for Amazon, or (c) there is some other issue Amazon has with them, or (d) simply an issue with Amazon systems.

OH, yeah, these are the pouches I usually use:
https://www.amazon.com/Custom-Leathercraft-1100-Multi-Purpose-Zippered/dp/B0002YVBC0

I used to get them at Lowes or Home Depot, it looks like they sell similar bags under the "Husky" brand at Home Depot now. Klein makes a canvas version too.

The smaller size has my "I never want to use it" stuff (per my post) and another smaller one the snacks and stuff. A larger one has all the electrical crap, and another larger one holds toiletries. So there's 4 pouches in total, then the clothing gets jammed (rolled) into Eagle Creek Pack-It Cubes (original). That's usually 2 cubes. Regular stuff and Gym stuff. On the last trip, I went without the cubes at all, and it worked out fine. I got some of this stuff https://riptie.com/product/ripwrap/ from the company that makes it. I saw them at trade show in Amsterdam last month, and they suggested I could use it as a simple means to secure clothing rolls. I tried it out, and it definitely worked, but I'm not sure how long it will last. Will give it a try for a while and see what happens.

Do you mean something like this?

http://www.amazon.com/Custom-Leathercraft-IP489X-Suede-3-Pocket/dp/B001AIKIE4/ref=sr_1_1?ie=UTF8&qid=1382973242&sr=8-1&keywords=leather+tool+belt

Backpack, Electrician Tool Bag, Tradesman Pro Organizer, 39 Pockets and Molded Base Klein Tools 55421BP-14 https://www.amazon.com/dp/B00MK9UY0A/ref=cm_sw_r_cp_api_i_gXmyCb6K36YKJ

I have one of these and really like it.

I have this one and really like how you can unzip it all the way open and it has lots of pockets.CLC tool bag Amazon

Yes they do. I use one. The whole pouch is leather.

Edit: https://www.amazon.com/dp/B0090PJE9Y/ref=cm_sw_r_cp_apa_wiFtybPR8E19R

CLC Custom Leathertcraft 1134 Carpenter's Tool Backpack, 44 Pockets, Padded Back Support https://www.amazon.com/dp/B0047O3PFC/ref=cm_sw_r_cp_apa_i_Lrf8CbZTNM4J9

I'd guess something like this, [Tool Backpack] (https://www.amazon.com/dp/B0047O3PFC/ref=asc_df_B0047O3PFC5071782/?tag=hyprod-20&creative=394997&creativeASIN=B0047O3PFC&linkCode=df0&hvadid=167152075853&hvpos=1o1&hvnetw=g&hvrand=17626030336696576457&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9019207&hvtargid=pla-310679289974). I googled tool backpack, and this looked like the cheapest one upon a quick glance. You could definitely go more expensive, but I think you could start your search with this.

I’ve been using this for a little bit not and absolutely love it, it’s very light and the little organizer box is just the perfect size, I’ve been wanting a veto but it seems more of a plumbers bag imo
https://www.amazon.com/dp/B0000DYVHS/ref=cm_sw_r_cp_api_i_c0j7Cb7C7JJ4C

If you only need it for tools, I got this Custom Leathercraft one and have not been disappointed. Very durable.

The CLC 1132 is probably more to your budget, but it probably has more space than you'll need.

Edit: not an affiliate link, because I ain't no con artist.

My techs and I all use these http://www.amazon.com/gp/aw/d/B000BFJE8S/ref=mp_s_a_1_sc_1?qid=1422355845&sr=8-1-spell&pi=AC_SX110_SY165_QL70

They are rugged and just the right size for our cable termination tools, screwdrivers and fluke toner/tester. They are available in different colors and there are bigger sizes.

This is what I am currently using.

http://www.amazon.com/DEWALT-DG5553-18-Inch-Contractors-Closed-top/dp/B001P30BOQ

How about these [leathercraft bags] ( http://www.amazon.com/Custom-Leathercraft-1100-Multi-Purpose-Zippered/dp/B0002YVBC0)?

Similar can be found at most Lowe's or Home Depot's

CLC Custom Leathercraft 1100 Multi-Purpose Clip-on Zippered Poly Bags, 3 Pack https://www.amazon.com/dp/B0002YVBC0/ref=cm_sw_r_cp_api_i_JaSZCbQ1372JM

I bought this http://www.amazon.com/gp/product/B000EDTSZG?psc=1&redirect=true&ref_=oh_aui_search_detailpage

https://www.amazon.com/gp/aw/d/B000EDTSZG/ref=mp_s_a_1_1?ie=UTF8&qid=1496457012&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=custom+leathercraft+tool+bag&dpPl=1&dpID=51Ywt3Y%2BTLL&ref=plSrch

You can look at alice packs or this is what i use

Custom LeatherCraft 1132 75-Pocket Tool Backpack https://www.amazon.com/dp/B0000DYVCY/ref=cm_sw_r_sms_apa_.hUjybTW41N7V

Or at least similar to mine

https://www.amazon.com/gp/product/B000EDTSZG/

I use one of those, plus a laptop backpack. All my tools go in the bag, and cables/velcro/cable ties go in the backpack (with the laptop). The center part of the bag is big enough to carry lots of parts (anything short of a tower, really...I've stuck a monitor in there a few times).

Buy a homeowner's tool kit, and dump it into a tool bag. That should get you started.

Those prices are absolutely insane.

I bought this and love it https://www.amazon.ca/dp/B0047O3PFC/

I use these. I've had mine for about 5 years and they take a beating.

http://www.amazon.com/Custom-LeatherCraft-1107-Bag-Combo/dp/B0000DD5H8/ref=sr_1_11?ie=UTF8&qid=1409763515&sr=8-11&keywords=canvas+tool+bag

http://www.amazon.com/Custom-Leathercraft-1100-Multi-Purpose-Zippered/dp/B0002YVBC0/ref=sr_1_13?ie=UTF8&qid=1409763591&sr=8-13&keywords=canvas+tool+bag

Because I do different things depending on the day I've moved toward the 'go bag' idea. So I have a bag that has my sound gear, my lighting gear, my projection gear, etc. I also have my daily drive laptop/general crap bag.

After destroying a few different bags I've moved to army style bags. I use mechanic tool bags for tools and adapters and such. I carry my laptop and documents in a paratrooper style messenger bag. There is no laptop padding on the inside so I just bought a neoprene case for the laptop.