Reddit mentions: The best truck bedings & tailgates
We found 15 Reddit comments discussing the best truck bedings & tailgates. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 9 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Smittybilt 5662301 G.E.A.R. Black Tailgate Cover for Jeep Wrangler
- The ultimate storage solution for your Jeep JK
- Color: Black
- 600 denier polyester
- UV Stable
- Two MOLLE/PALs pouches
- Pouches interchangeable with entire Smittybilt G.E.A.R. family
- Also available in Coyote Tan (5662324) and Olive Green (5662331)
Features:
Specs:
Color | Black |
Height | 4 Inches |
Length | 15.5 Inches |
Number of items | 1 |
Weight | 3.59 Pounds |
Width | 15 Inches |
2. Master Lock Tailgate Lock, Stainless Steel, 8253DAT
- LOCK APPLICATION: Best used on pickup trucks to prevent removal of tailgate
- EASE OF USE: Tailgate lock installs in minutes without removing the tailgate on most models
- DURABLE DESIGN: Stainless steel body and keyway cover protects lock mechanism from corrosion
- SPECIFICATIONS: Fits most late-model Ford, GM, Dodge and Toyota trucks (Does not fit Toyota Tacoma)
Features:
Specs:
Color | One Color |
Height | 0.7 Inches |
Length | 8.7 Inches |
Number of items | 1 |
Release date | March 2012 |
Size | 1 Pack |
Weight | 0.52 Pounds |
Width | 5.7 Inches |
3. Dee Zee DZ43200 Truck Tailgate Assist
- This tailgate assist fits 2004-2014 Ford F150 and 2004-2014 Lincoln Mark LT. Does not fit Flareside Models.
- NEW and IMPROVED – We have improved the nutsert. You no longer have the little bottle of blue thread lock to mess with. The nutsert comes with thread lock on it and ready to be installed. You do not have to worry about applying the thread lock and getting it on your fingers, clothes, or your vehicle.
- Easy to use. The Dee Zee tailgate assist makes the use of your tailgate an ease. By simply installing this on your truck will give you the ability to release the tailgate with one hand and not have to worry about that loud bang when it comes down. The smooth controlled drop allows your children to safely lower the tailgate.
- By adding the heavy-duty tailgate assist to your truck will ease the strain on the cables and hinge point by not free falling. You also will no longer draw attention to yourself when everyone hears the bang as your tailgate slams down.
- Installation is a breeze NO DRILLING required and the parts are all specific to the year, make, and model truck.
- Feel assured, we have tested the tailgate assist for the use and abuse it will receive as it assists you for years.
- Fit type: Vehicle Specific
Features:
Specs:
Color | RED |
Height | 5 inches |
Length | 5 inches |
Number of items | 1 |
Weight | 1 Pounds |
Width | 22 inches |
4. Genuine Ford FL3Z-99406A10-A Tailgate Shock Assembly
- Product Type:Auto Part
- Item Package Weight:0.771 Kilograms
- Item Package Dimension:10.668 cm L X15.24 cm W X19.304 cm H
- Country Of Origin: United States
Features:
Specs:
Color | Black |
Number of items | 1 |
Release date | October 2015 |
Weight | 1 Pounds |
5. Tailgate Molding Top Protector Cap Compatible with Chevy GMC Silverado Sierra 1500 (2007-2013), 2500 3500 (2007-2014) Bolts-on with OEM Hardware no drilling
1 Rear Tailgate Spoiler with adhesive strip and adhesion promoter (uses existing factory screws, hardware NOT included)Note: Not compatible with 2007 Classic Models; Not compatible with 2014 Silverado/Sierra 1500; Compatible with Chevrolet/GMC Silverado 1500 (2007-2013), Silverado 2500/3500 (2007-20...
Specs:
Color | black |
Height | 5.25 Inches |
Length | 61.75 Inches |
Size | Tailgate Cap without hardware |
Width | 3.25 Inches |
6. Omix-Ada DMC-5454025 Tailgate
OE StyleDirect FitOfficially licensedSteel
Specs:
Height | 5 Inches |
Length | 31 Inches |
Weight | 12 Pounds |
Width | 17 Inches |
7. Genuine GM 15932239 Pick Up Box Side Molding, Left, Upper
99-05 Silverado Sierra Left Driver Upper Bed Rail Molding 6.5 FT OEM NEWLeft Hand Driver's Side Upper Bed Rail MoldingBlack159322391593-2239
Specs:
Height | 6.5 Inches |
Length | 82 Inches |
Weight | 0.93 Pounds |
Width | 2 Inches |
8. Thule Gate Mate Tailgate Pad
- Ultra durable heavy duty vinyl with foam padding protects both bike and truck tailgate
- Integrated Knock-BlocksTM prevent bikes from sliding off edge of tailgate causing damage to the vehicle and or bike
- Handle HoodTM allows for convenient access to tailgate handle without pad removal
- Strap anchors provide secure tie down points for bikes and other loads
- Sturdy nylon straps to keep pad securely attached to tailgate
Features:
Specs:
Size | One Size |
9. Bestop 52600-01 Tailgate Bar Kit for 1997-2006 Wrangler TJ
- You can't properly mount the rear vinyl window of your soft top without a Tailgate Bar
- Available for 1997-2006 Wrangler & Wrangler Unlimited
- Replaces old or damaged factory tailgate bar
- Compatible with factory soft tops, Bestop soft tops and most aftermarket soft tops
- Black finished steel construction resists corrosion and scratches
- Integrated durable rubber seal
- Includes tailgate bar, retainer clips, mounting screws and instructions
- Not for use with Bestop Classic Trektop part numbers 56801, 56802
Features:
Specs:
Color | Black |
Height | 0 Inches |
Length | 0 Inches |
Number of items | 1 |
Weight | 5 Pounds |
Width | 0 Inches |
🎓 Reddit experts on truck bedings & tailgates
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where truck bedings & tailgates are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Foot pegs will change your life.
I got some MOLLE seat covers that I enjoy, having pouches to keep things attached down with the doors off is key.
Shorty antenna. Same radio quality, only 5" long.
Bikini top is nice but personal preference really.
Flip open key is more comfortable in pocket.
Flip Key- http://www.amazon.com/Discount-Keyless-Replacement-Compatible-OHT692427AA/dp/B00LLLVW9A
Foot Pegs - http://www.amazon.com/Foot-Peg-set-Jeep-Wrangler/dp/B010TWOQGW
Shorty Antenna - http://www.amazon.com/AntennaX-Shorty-5-inch-Antenna-Wrangler/dp/B00DQJ8T00
MOLLE Tailgate - http://www.amazon.com/Smittybilt-5662301-Black-Tailgate-Wrangler/dp/B003CG9QFY
MOLLE Seat covers - http://www.amazon.com/Smittybilt-5661001-Black-Front-Cover/dp/B001CF3N9M
Bikini Top - http://www.amazon.com/Bestop-52584-35-Header-style-Wrangler-Unlimited/dp/B0032H6WR8
Finally, I had a welder friend make this for me and it's amazing. http://www.oman4x4.com/albums/cad/hammock2.jpg
Once you hopefully find it or worse have to buy a new one. I recommend one of these: https://www.amazon.com/Master-Lock-8253DAT-Stainless-Tailgate/dp/B007OSL3DY/ref=sr_1_2?ie=UTF8&qid=1487945198&sr=8-2&keywords=ford+f150+tailgate+lock
I have one on my 2012 F150. Sure it isn't THAT difficult to get through, but anything that makes it take longer to take a tailgate figured could only help.
I installed this over Christmas break:
https://www.amazon.com/Dee-Zee-DZ43200-Tailgate-Assist/dp/B001PWA0IO/
Works great.
I love my tailgate assist dampener. Installs quickly behind the tail light so it doesn't look like a cheap add on.
https://smile.amazon.com/Ford-FL3Z-99406A10-A-Tailgate-Shock-Assembly/dp/B0134UWBPO/
It was something like this https://www.amazon.com/dp/B0757762PK/ref=cm_sw_r_sms_apa_i_aiQ3Db21HMEE3
I have one of these on my truck. It's a keyed lock that prevents the tailgate from being removed but still allows the tailgate to open and close. Much handier than locking and unlocking the handle every time and more secure than a hose clamp. Also no tools required to remove the tailgate. Only $20
I'll provide an optional route for you to take. It'll require welding, and measuring to make sure it'll all work
Omix-Ada DMC-5454025 Tailgate https://www.amazon.com/dp/B001DLH2WE/ref=cm_sw_r_cp_apa_i_FXrXDbZJC6CEH
Take that, cut out your panel of your tailgate, and weld that in.
It attaches to the bottom of the window and makes a seal
https://www.amazon.com/Bestop-52600-01-Tailgate-1997-2006-Wrangler/dp/B000VLF990
Here is a link.
This one? How do you attach it to the door?
https://www.amazon.com/Smittybilt-5662301-Black-Tailgate-Wrangler/dp/B003CG9QFY
Edit: Link
tailgate I got this on amazon for $60. It really has come in handy.
I know it's not a rack, but I use a Thule tailgate cover
Time for a tailgate lock
This is the one I bought.
https://www.amazon.com/Genuine-15932239-Pick-Molding-Upper/dp/B00GUH0QO2
https://www.amazon.com/Genuine-GM-Molding-Part-15932238/dp/B00TAB80UC