Reddit mentions: The best wall surface repair products
We found 130 Reddit comments discussing the best wall surface repair products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 55 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Quakehold! 88111 Museum Putty Neutral
- Ideal for securing antiques, collectibles, and other breakable items from falling
- Works on almost any surface
- Easy to apply with its pliable texture
- Non-toxic and non-damaging to your walls, surfaces, or furniture
- Easy to remove and reuse without leaving behind unsightly residue
Features:
Specs:
Height | 6.75 Inches |
Length | 7 Inches |
Number of items | 1 |
Size | 2.64 Oz. |
Weight | 0.2 Pounds |
Width | 4.25 Inches |
2. Rust-Oleum 274232 Repelling treatment base coat-9 oz and top-coat 9-oz , Frosted Clear
Technically advanced super hydrophobic formula creates a water-proof surface where moisture simply beads up and rolls awayCovers up to 10 sq ft, dries to the touch in 30 minutes; allow to fully cure for 12 hours before exposing to water for maximum benefitDurable formula is a treatment for interior/...
Specs:
Color | Frosted Clear |
Height | 7.88 Inches |
Length | 5.25 Inches |
Number of items | 1 |
Size | 18 oz |
Weight | 1.125 Pounds |
Width | 5.25 Inches |
3. Dap 12372 CrackShot Spackling Paste 5.5-Ounce
Professional knife grade spackling paste for easy application and superior paintabilityCreamy texture applies smoothly, dries hard and sands effortlesslyQuality results every timeWill not shrink and will not flash paintFor interior and exterior use
Specs:
Height | 12 inches |
Length | 10 inches |
Number of items | 1 |
Width | 3 inches |
4. 3M High Strength Small Hole Repair Kit with 8 fl. oz Plus Primer, Self-Adhesive Patch, Putty Knife and Sanding Pad
- CONTAINS all the tools necessary for a professional repair
- KIT INCLUDES 8 fluid ounce tub of primer enhanced spackling compound, 4'' self-adhesive patch, 3" putty knife and sanding pad
- FOR HOLE REPAIRS up to 3" in diameter
- 3M SMALL HOLE REPAIR makes repairs 3x faster than traditional spackling
- NO SHRINKING, cracking, or sagging
Features:
Specs:
Color | White |
Height | 8.5 inches |
Length | 2.61 inches |
Number of items | 1 |
Size | 4 Piece Set |
Weight | 0.49 Pounds |
Width | 6.88 inches |
5. Dap 12345 drydex spackle; 1/2pt wall patch kt
- Repairs holes and cracks up to 3 inches in diameter
- For use on drywall, plaster or masonry surfaces
- Sandable and paintable
- Dry-time indicator to help eliminate finishing errors
- Includes: 8 oz. DryDex spackling; 4 in. x 4 in. flexible, self-adhesive perforated aluminum patch; 4 in. x 3 in. 100-grit sand paper; and 2 in. ergonomic plastic putty knife
Features:
Specs:
Color | Pink/White |
Height | 9.3 Inches |
Length | 22.4 Inches |
Number of items | 1 |
Size | 8 oz |
Weight | 1.05 Pounds |
Width | 8.3 Inches |
6. Walboard Tool 54-007 8" X 8" Drywall Repair Patch
- Drywall repair patch
- Self adhesive
- Rustproof aluminum
- Easy to install
- 8" x 8"
Features:
Specs:
Height | 8 Inches |
Length | 0.13 Inches |
Number of items | 1 |
Size | 8 Inch |
Width | 8 Inches |
7. Famowood 5050060 Glaze Coat Epoxy Adhesive Kit - Pint Clear
Easy 1:1 mixing ratioVersatile - use on any non waxy materialSelf-leveling - minimal spreading required
Specs:
Color | Clear |
Height | 6.19 Inches |
Length | 2 Inches |
Number of items | 1 |
Size | 1 Pack |
Width | 4 Inches |
8. Woodmate 2498 Mr. Grip Screw Hole Repair Kit,Steel,Pack of 1
Repairs holes made by screwsCan be used to fix worn and stripped screw holesFor use in wooden, metal, plastic items into cement, aluminum or anywhere screw holes need fixingJust cut strip to size needed, fit lengthwise into hole, insert screw and tightenScrew may be unscrewed if needed
Specs:
Color | Steel |
Height | 8 Inches |
Length | 0.3 Inches |
Number of items | 1 |
Size | Pack of 1 |
Width | 4.3 Inches |
9. 3M High Strength Small Hole Repair, 16 oz.
MAKES REPAIRS 3X FASTER than traditional vinyl spacklingQUICK AND EASY repair for nicks and nail holesFOR HOLE REPAIRS up to 3" in diameterPRIMER ENHANCED spackling compound for great hiding powerRESISTS FLASHING of paintNO SHRINKING, cracking, or saggingLIGHTWEIGHT spackle compoundPROFESSIONAL-LOOK...
Specs:
Color | Gray |
Height | 2.9 Inches |
Length | 4.16 Inches |
Number of items | 1 |
Size | 16 oz |
Weight | 0.6 Pounds |
Width | 4.16 Inches |
10. Instant Screen Repair Tape
- No tools required.
- Makes your damaged screen look like new again - no need to replace the whole screen.
- Works like tape.
- 10' length can be cut to size to fix any tear or hole within 2" wide.
- Mesh material bends for a seamless look.
Features:
Specs:
Color | Silver |
Size | One Size Fits All |
Weight | 0.15 Pounds |
11. Dap 34611 1 Quart Gray Pre-Mixed Concrete Patch
Ready to use no mixing or diluting
Fills and seals cracks up to 1" wide
Maintains bond and elasticity through extreme weather conditions
Easy to apply
20 40 minute skim time
Use for vertical and horizontal patches, interior or exterior
Use for concrete or masonry surfaces
Repairs rough surfaces and holes
Can also be used for re applying small broken pieces of concrete, or tuckpointing brick mortar joints
Features:
Specs:
Height | 4.9 Inches |
Length | 30.6 Inches |
Weight | 23 Pounds |
Width | 5.1 Inches |
12. Dap 10504 All-Purpose Ready-To-Use Stucco Patch, 1-Quart
- This item is a Dap 10504 All-Purpose Ready-To-Use Stucco Patch, 1-Quart
- Purpose of use for Painting Supplies, wall-surface-repair-products
- This product is manufactured in United States
- Durable and permanent.
- Easy to tool and paint.
- For interior and exterior applications.
Features:
Specs:
Color | White |
Height | 4.75 Inches |
Length | 5 Inches |
Number of items | 1 |
Size | 1 Quart |
Weight | 4 Pounds |
Width | 5 Inches |
13. Dap 12278 Elastomeric Patch and Caulking Compound, 1-Quart Tub, Packaging may vary,White
Tips for a good project:(1) Think ahead(2) Permits are important(3) Have a realistic budget(4) Expect the unexpected, and (5) Know the codeExcellent for use on smooth surfaces including masonry, brick, plaster, drywall or any surface requiring a permanently flexible seal.Superior paintability - won'...
Specs:
Color | White |
Height | 8 Inches |
Length | 5 Inches |
Number of items | 1 |
Size | Quart |
Width | 5 Inches |
14. Planitop X 10lb Bag
- The versatility and easy use make it the Duct Tape of the concrete repair industry
- Approved for Horizontal, Vertical, and Overhead concrete patching for both indoor and outdoor use
- The useable thickness is from featheredge to 4" thick, making it good for almost any concrete repair
- Fast setting, ready for foot traffic in less than 30 minutes and vehicle traffic in 3 hours
- If you keep a bag of this on your shelf, you'll easily tackle most concrete repairs
Features:
Specs:
Color | Light Gray |
Weight | 10 Pounds |
15. Stella Drywall Repair Kit Basic (12”x12”x1/2”)
- ✅Fix your drywall like professional house builders do with Stella Drywall Repair Kit
- ✅The absolutely best way to repair any hole in a drywall - drywall cut size: 12"x12"x1/2"
- ✅Comes with supporting wooden boards, joint compound, sanding pad and patch tape to fix and restore the drywall to its brand new shape in few minutes
- ✅Stella Drywall Repair Kit makes wall repairs easy and permanent
- ✅With Stella Sealants, customer satisfaction is 100% guaranteed - if you have any questions don't hesitate to contact us
Features:
Specs:
Size | 12x12 basic |
16. System Three Resins 646697001380 Window and Door Rot Repair Kit
End Rot kit is a preservative and epoxy wood restoration systemPermanently repairs architectural wood components damaged by rot, insects, weather and abuseSafe to use with low odor and solvent freeRestores windows, doors, fascia, siding, decks, beams and log homesCan be primed and painted with any h...
Specs:
Height | 8.5 Inches |
Length | 4.25 Inches |
Number of items | 1 |
Weight | 1.45 Pounds |
Width | 4.25 Inches |
17. Sheffield 1126 Porcelain Touch-Up White,1 fl oz
The product is oz wht porc touch paintEasy and simple use kitThe product is manufactured in United states
Specs:
Color | White |
Height | 1.5 Inches |
Length | 5.8 Inches |
Number of items | 1 |
Size | 1 Fl Oz (Pack of 1) |
Width | 5 Inches |
18. Homax Group Inc Homax Group 5506 Heavy Duty Self Adhesive Wall Repair Patch, x 6-Inch, 6 x 6
Refinish over the patch with spackling and spray texture to create an invisible patchThis self-adhesive patch helps prevent repeat damage in high traffic areasPatch is 6 inch by 6 inch
Specs:
Height | 9.5 Inches |
Length | 8.5 Inches |
Number of items | 1 |
Size | 6 x 6" |
Weight | 0.19 Pounds |
Width | 1.25 Inches |
19. Red Devil 0802 Crack Patch Premium Acrylic Spackling, 1/2 Pint, Pack of 1, White
Easy Application and Tooling, Interior/Exterior UseExcellent Sanding When Fully Cured, Dries FastPaintable, No ShrinkingIf the product is dry or harder than desired, simply add a couple drops of water and mix and it will return to a creamier consistencyIs PaintableIs Sand ableWont' crumble or flakeW...
Specs:
Color | White |
Height | 3.25 Inches |
Length | 3 Inches |
Number of items | 1 |
Size | Pack of 1 |
Width | 3 Inches |
20. Duck Brand 282084 Self-Adhesive Drywall Repair Fabric, 6-Inch by 25 Feet, Single Roll
100 percent fiberglass meshNo need to pre-apply a joint compoundSelf-adhesive and repositionable - great for difficult jobsQuickly repair holes and cracks in drywallSingle roll
Specs:
Color | White |
Height | 6.13 Inches |
Length | 2.88 Inches |
Number of items | 1 |
Size | 1 Pack |
Weight | 0.3125 Pounds |
Width | 2.88 Inches |
🎓 Reddit experts on wall surface repair products
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where wall surface repair products are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
A standard sized plaster wrap package will be about 10 dollars, but depending on how large your shell is going to be or how much armor you are going to make you will be needing much more than that. Standard size plaster wrap
This amount of wrap will do about 10 regular thickness masks (if that guesstimate helps?). I would buy the regular size plaster wrap and test it out, this will also help you determine how much more wrap you are going to need. If you need a lot buy in bulk, the price per amount of wrap goes down considerably the more you buy, rather than buying a bunch of the regular size.
Tutorials-
These two go over the basics of plaster wrap with the example being one of the most traditional uses of plaster wrap.
part one of traditional use of plaster wrap
part two of mask tutorial
Now I couldn't find a tutorial for the armor bit but I can explain as best I can. As the link below mentions to make armor bits you're going to need a frame or base shape for you to put the wrap on top of. Traditionally the base is someone's face or hand. The site below mentioned chicken wire being used as a base. For my base I used crumpled newspaper, masking tape (to hold it together) and plastic wrap(to keep the water out of the newspaper). I built up the shape (squirtle's shell) by adding more paper or punching down budges (haha, it was getting a little to close to the con for my comfort). Then I built a couple of layers of plaster wrap and let it dry. Be aware that that using a non-breathing base like this will take a day or more to dry fully.
this tutorial goes over surface finishing technique that i used
I used a spackle plaster for filling nail holes in a wall to cover the gauze texture and give me a surface to smooth (sand) and paint. (what was nice about the stuff I used was that it went on pink and dried white). I put the plaster on top of the wrap as smoothly as I could without fusing with it too much. I then waited for it to dry. Now I had to do a couple of layers. The first one is for filling all the divets and dips. Take a medium grit sand paper and smooth until you've got the right shape. The second, third (etc) layers are for finer and finer details. The more layer you do, the finer sand paper you'll want to use. Keep sanding until you are stratified with the smoothness. If you have OCD like me, then you can use a additional technique of primer-ing the piece then gently sanding to check for highs and lows. But this is not necessary.
I used a product like this
Aha! So I found it! By luck! I had seen this before a long time ago but didn't bookmark it.
Armor making tutorial There is a translation in the comments below. Though it's not a very good translation you'll get the gist of it.
Painting the piece.
Gently dust the surface. Primer all of the pieces in the most suitable color (black, gray, white). Then paint them. Then seal with a clear.
A can of spray paint costs about 5 bucks in my area.
A very very very rough estimate for everything would cost about 50 dollars. (£30 ).
Hope this help. Let me know if you need clarification.
Yeah nothing out there on that...thought about doing a video but too lazy X).....I used painters tape on bottom of the headlights and over the blinkers. and just sprayed the whole front fascia(using a large piece of cardboard to protect any stray spray from getting on the rest of the car)....it does kinda puddle up and drip if you put too much in any one area. Worked perfectly everywhere so i'd say you just need a nice thin coat...again not sure how long it'll last, it does seem to wipe off fairly easily as it's not permanent. Also due to all the snow on the road I couldn't use auto drive much so not a big deal...I bought this, and just used the top coat per recommendations: https://www.amazon.com/Rust-Oleum-274232-Repelling-treatment-top-coat/dp/B00DNQBFAW/ref=sr_1_4?keywords=neverwet&qid=1574971342&sr=8-4.....did a section of concrete stairs with the base and top coat that worked really well to prevent icing so i'll probably buy some more for that.
depends. You have two main routes.
A) fast and dirty. Buy http://www.amazon.com/12372-CrackShot-Spackling-Paste-5-5-Ounce/dp/B000HSENKS
and http://www.amazon.com/Great-Neck-125PC-4-Inch-Flexible/dp/B000OC4YUG/ref=pd_bxgy_hi_img_y
Put paste into holes. smooth and make flush with wall with the knife. sand and paint.
or
B) the more labor intensive but correct way.
Get a ready-made drywall patch. These are available at big-box home centers and hardware stores. They use a peel-and-stick, metal-backed patch for added strength.
Clean up the edges of the hole. Trim away frayed edges with a utility knife and press back into place any small chunks still hanging by a flap.
Cut or shape the patch carefully to fit the hole. Make sure to leave extra backing all around the patch to attach to the drywall surrounding the hole.
Clean and dry the repair area to allow maximum adhesion. To clean greasy areas (as in a kitchen), use trisodium phosphate ("TSP"), which can be found at most paint centers. Warm, soapy water can do the job, too, but don't let the drywall get too wet.
Apply the patch to the wall and smooth the taped edges with your putty knife. This will remove air bubbles.
Use a wide-blade putty knife to spread a thin topcoat of joint compound (sometimes called "mud") over the area surrounding the repair. The aim is to create a smooth transition between the patch backing and the surrounding wall. Because the patch backing lies on top of the existing drywall, there can be an unattractive layered look to your work if you don't do something to disguise it. Therefore you must learn to apply compound around the patch in such a way that the patch backing is "feathered" gradually into the rest of the wall. With practice, you'll learn the technique of making this transition smoothly. It will often require more than one coat of mud.
Example: If repairing a 2- to 3-inch (5- to 7.5-cm) hole, you will want to use a 10-inch (24 cm) putty knife to apply a skim coat of joint compound as a final topcoat. Remember to "screed" (gently scrape) the mud in one smooth, final stroke.
Apply a liberal amount of non-shrink joint compound with a putty knife. Wider putty knives will produce smoother results.
Smooth the compound with the putty knife. Pull the blade toward you in one steady, smooth motion, letting the knife make a 30-degree angle with the wall. If your finish doesn't look smooth, simply wipe off the blade, wet it and scrape the wall again. Make the mud as smooth as you can, but don't worry if it's not perfect. You will be able to sand the compound later when it's dry (although this can create a bit of a mess, so it's best to leave it as smooth as possible before it dries).
Let the patched area dry thoroughly before applying additional coats or sanding.
Once the compound is dry, lightly sand the area smooth using drywall sandpaper attached to a drywall sander. (Regular sandpaper will work, just not as well.) If there are large blobs or strips, shave these off with the putty knife first. You want to create as little dust as possible.
Hide minor imperfections with an ultra-thin topcoat of joint compound. Apply this topcoat over pin holes or hairline cracks as if you were trying to scrape it all off with your knife without leaving any behind. With experience, this step can often be accomplished without additional sanding.
This product can be applied with a 3 inch putty knife, and looks exactly like concrete from a bag when dry. It's fun to work with. Has sand in it. You may need 7 or 8 of them, but it takes very little time to get the job done. Some newspaper on the floor.
https://www.amazon.com/Premixed-Concrete-Patching-Compound-0-95L/dp/B001XW64M2/ref=pd_sbs_60_1?ie=UTF8&pd_rd_i=B001XW64M2&pd_rd_r=406XWTRXQM5WKZPHQ0FC&pd_rd_w=pXZbO&pd_rd_wg=WsyNm&psc=1&refRID=406XWTRXQM5WKZPHQ0FC
This product is also fantastic, and a 6 pack is only 35 dollars. It’s sandy and grey, shrinks a little, and can accept a second skim coat, which you may not think necessary. Also fun to work with and applies with a 3 inch putty knife.
https://www.amazon.com/32611-Phenopatch-Pre-Mixed-Concrete-Patch/dp/B015J3VTZM/ref=sr_1_4?s=hi&ie=UTF8&qid=1474932669&sr=1-4&keywords=cement%2Bcaulk&th=1
So, my dog decided that it would be a fantastic idea to make a hole in my APARTMENT wall. I've somehow successfully hid it from the maintenance guys but if I don't fix it before move out, I will owe more money than I have. I need this to put it back together and then hope that I can find the ugly gray paint at a hardware store. My dog is so ridiculous.
Thanks for the contest. These are amazing and you're amazing <3
So it sounds like a good first step would be to start with the bigger hole and the missing edges and use Planitop X to fill close to the top then Ardex CD on top to smooth it out.
Unfortunately it doesn't look like I can get either of those anywhere near where I live (I'm in Canada in a fairly small city). Are there other products that are similar? The Home Depot near me seems to only have Quickrete products.
If I rip out and re-pour the concrete around the firepit, what would need to be done differently to prevent it from cracking again?
Thanks for all of the info!
Edit: found Planitop X on amazon.ca, 10 lb bag for around $33, so I can definitely order that if it's the best product for the job.
I've always had good luck with [Earthquake Putty] (https://www.amazon.co.uk/Quakehold-Earthquake-Preferred-product-stabilizing/dp/B0002VA9NA/ref=sr_1_1?ie=UTF8&amp;qid=1467150201&amp;sr=8-1&amp;keywords=earthquake+putty) It seems to hold a bit better than the blue stuff. Maybe you can pair it with something like [this] (https://www.amazon.co.uk/Newest-Colorful-Multipurpose-Organizer-Smartphone/dp/B016KF3M44/ref=sr_1_7?s=shoes&amp;ie=UTF8&amp;qid=1467150308&amp;sr=8-7&amp;keywords=cable+tidy) for the actual cables to run through.
It's actually this stuff called "Quake Hold", which is reusable/stickable putty to hold stuff down during earthquakes and such. It's easy to ball up and manipulate to any size and it wont leave residue on the caps. Does a great job holding knick-knacks on shelves too =)
Hey, yea I was able to seal it up. Unfortunately I didn't take any pictures during the process.
But, I essentially followed all of the suggestions in here.
I removed the face plate on the inside wall. Put a piece of insulation in the slot. I had to cut it to size and pull it up the slot from the outside. Sprayed some minimal expansion foam around the edges of the metal slot. Took off the outside faceplate and put this insulating wrap over the slot. Reattached the outside faceplate and superglued it shut.
Used this drywall patch kit to fix the inside. I had to get creative with mounting the included piece of sheetrock because the metal slot in the wall didn't leave any room to mount the wood blocks to the surrounding drywall. Spackled, sanded, spackled, sanded, (rinse repeat until smooth), and painted.
I didn't color match my paint well enough but otherwise its a really smooth finish and I still like the old nostalgic look of the outside faceplate. The true test will come in the winter to see if it's insulated well enough.
I love art. Hi
[item] (http://www.amazon.com/dp/B000HSENKS/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&amp;colid=3MZKKTPS3LUTM&amp;coliid=IAQNXEEULTIQF)
like art is my favorite
Buy this Franklin Sensors stud finder or something higher, nothin lower. You will have it for life. I own one and it's the tits.
Also buy a roll of paper drywall tape. That mesh stuff is crap. You need to rebuild those holes with paper and gypsum (spackle). Any will due.
Clean holes with stiff bristle brush. Try to save any chunks that have intact, contiguous paper that are flapping around, they will increase strength.
Fill, mud and tape. Let dry. Light wet sand (wet dish rag). Let dry. Mud again if you see edges. Let dry. Wet sand. Dry sand. Paint. Dry times are 24 hours to be safe.
It is the only way!
Reference: Parent of 2 children under 5.
Not *exactly* what you're looking for, but I've had a similar situation with dry rot. There are wood reinforcing products that penetrate the wood (it acts like a wick) and restore integrity. Here's a starting point for your research: https://www.amazon.com/gp/product/B008DYN1B0 Here's something similar: https://www.amazon.com/System-Three-Resins-646697001380-Window/dp/B0015YLMUW
something like this
You just want a small all in one patch kit. If you are new to repairs, just do a little at a time give it plenty of time to dry.
Nothing wrong with checking out “drywall repair” on YouTube either.
Good luck
What you need is this. It's got everything you need.
Paint as needed.
I don't know what happened but I'm glad to hear it seems better.
Saw this on shark tank, it may make you think wtf
I located stud and cut out a section of the sheetrock/drywall with a saw. Then using the Indoor Hanging Kit, predrill and lag bolt into the center of the stud, the drywall section previously cut-out and installed the anchor.
A coat of drywall mud over the cut out section with one of those mesh patches gets things looking pretty good.
I've had some of the eye bolts bend a bit, plus 250lb rated hardware is usually 3/8" going into a 2x4 which is really 1.5". I like to cut away the drywall and make sure I'm squared up and drilled in properly.
tl;dr cut away a section of drywall and save it, drill directly into joist or stud to install your anchor. Patch up with mud and the save section of the wall.
3M Patch Plus Primer Kit with 8 fl. oz Patch Plus Primer, Self-Adhesive Patch, Putty Knife and Sanding Pad https://www.amazon.com/dp/B00IOQKUQG/ref=cm_sw_r_cp_api_RBxSBbDZW9JS0
I’d recommend that one. Use a drop cloth under the wall so you won’t get any on the carpet if you have any... good luck and I pray you find paint to match the wall.
https://youtu.be/qvtoikKG318 the guy in this video uses the same kit
You’ll need to clean all the caulk off, then treat with a rust neutralizer, then paint with special enamel repair paint before recaulking the edge.
https://www.amazon.com/Loctite-8-Ounce-Extend-Neutralizer-1381192/dp/B001000VS0
https://www.amazon.com/Sheffield-1126-Porcelain-Touch-Up-White/dp/B000BZX28Q
Drywall Repair Patch :: $5
1 Quart of Paint :: ≤10$
I don't even know if you could file a case in civil small-claims court for that small of an amount, but if you could, it would be an absolute waste of time and energy that's likely motivated entirely by the desire for payback.
Thanks, that makes sense. This looks like it would fit the bill, what do you think? https://www.amazon.com/Red-Devil-0802-Premium-Spackling/dp/B0058I43N4/
One option is furniture securing straps. If you live somewhere prone to earthquakes, you've probably seen them before.
The same people also make special putty for securing stuff to shelves. That was very helpful for childproofing at my house.
I'd actually recommend Museum Putty. It doesn't leave a residue like standard blue sticky tack and it'll provide just enough hold to keep components from blowing away. Additionally, it won't obstruct the front of the components.
We use it to prevent cat-lateral damage, but if you kept a slab of this at the table within easy reach I think it would serve you well.
Depending on how the mesh broke, you could get a screen repair kit pretty cheap. Just make sure any rough edges are on the too side so he can't scratch himself. http://m.homedepot.com/p/Phifer-Brite-Aluminum-Screen-Patch-Repair-Kit-3007751/100566717
If you need to replace the whole screen, something like this might work.
http://www.amazon.com/gp/aw/d/B000AY24FA/ref=pd_aw_sims_8?pi=SS115&amp;simLd=1
Or maybe screen tape. http://www.amazon.com/gp/aw/d/B0081S4H3O/ref=pd_aw_sims_3?pi=SS115&amp;simLd=1
Famowood epoxy resin.
https://www.amazon.com/Famowood-5050060-Glaze-Epoxy-Adhesive/dp/B008G8ON9W Start there, you can change brand/size as you see fit. :)
get something like THIS and you should be good to go even for a hole up to an inch or 2.
I use drywall repair fabric and it works great! It’s sticky too so it doesn’t shift around when you fill the pot, plus it’s cheap and one roll lasts forever
You can get these from your local hardware store. They work great for me.
Screw hole repair
Here is a link to Amazon. Looks like something similar. Might be a little easier to get there.
It's at the big box hardware stores also.
These work great if you can't simply use a thicker screw:
https://www.amazon.com/Woodmate-2498-Grip-Screw-Repair/dp/B001B38ALG/ref=sr_1_1?ie=UTF8&amp;qid=1466008472&amp;sr=8-1&amp;keywords=mr+grip
It's called Famowood Glaze coat. It was about $25 at menards for a quart which barely covered the top. First time using it. But I'm pleased with the results.
As an out of box collector I have come to rely on museum putty, cheap and very effective. http://www.amazon.com/Quakehold-88111-Museum-Putty-Neutral/dp/B0002VA9NA/ref=sr_1_1?ie=UTF8&amp;qid=1457246633&amp;sr=8-1&amp;keywords=quake+hold
If you want that specific bag to have water resistance, you can add a hydrophobic coating to it with this [Rust-Oleum spray.](Rust-Oleum 278146 NeverWet 11-Ounce Outdoor Fabric Spray, Clear https://www.amazon.com/dp/B00KRHF8E4/ref=cm_sw_r_cp_api_AuQ-zbEF5DKD1) Then it'll be perfect for everything but extended submersion.
There's also a multipurpose variant in [a can.](Rust Oleum 274232 Never Wet Multi Purpose Kit https://www.amazon.com/dp/B00DNQBFAW/ref=cm_sw_r_cp_api_EvQ-zbMNGXTYW)
Check out Never Wet. I've heard good things!
Fellow southern Californian. This product might be useful:
Quakehold! 88111 Museum Putty Neutral https://www.amazon.com/dp/B0002VA9NA/ref=cm_sw_r_cp_apa_NqvVAb0CS82N0
Something like this would work: https://www.amazon.com/3M-Repair-Compound-Self-Adhesive-Sanding/dp/B06Y4682NF or https://www.amazon.com/3M-Patch-Primer-Self-Adhesive-Sanding/dp/B00IOQKUQG/
(Drywall repair kits can also be purchased at Lowes, Home Depot, etc.)
Do you have leftover paint for touch-up?
Window screen repair tape. Yes, it's because we have cats
This stuff is really nifty for keeping stuff from falling.
Quakehold! 88111 Museum Putty Neutral
https://www.amazon.com/dp/B0002VA9NA/ref=cm_sw_r_cp_api_bWTPAbWX379DW
museum putty helps with this
If you read the packaging, on the upper left it says "FROSTED CLEAR".
If you read the description of the product on their website, it states "Sprays clear and dries to a flat light haze"
The frosted hazing is normal.
I fixed a chip in my white porcelain sink using Sheffield Porcelain Touch-up. It worked very well.
https://www.amazon.com/Sheffield-1126-Porcelain-Touch-Up-White/dp/B000BZX28Q/ref=redir_mobile_desktop?_encoding=UTF8&amp;psc=1&amp;ref_=ppx_yo_mob_b_inactive_ship_o0_img
All three are pretty sturdy actually and don't require any careful positioning. Try different surfaces as well. And if all else fails, use display putty.
Made this hole way back when I was in school. Tried hiding it with thick paper and tape. Now that im planning on repainting my walls from this pee colored yellow to a shade of grey, I need to repair this hole first.
Whats the easiest way for me to repair this without costing me too much? Take into consideration Ive never done anything like this before.
I was thinking this Patch Plus Primer, Fiber Mesh Patch, and Plastic Knife Set? Will these be all that I need?
I have a very curious cat, and I also have some sentimental, breakable items that I'd like to keep in once piece, but also have out on shelves. I invested in some museum putty, and every single thing in my home that isn't food has survived his antics. https://www.amazon.com/Quakehold-88111-Museum-Putty-Neutral/dp/B0002VA9NA/ref=sr_1_1?ie=UTF8&amp;qid=1493008406&amp;sr=8-1&amp;keywords=quakehold
Something like this should be fine.
https://www.amazon.com/gp/product/B0002VA9NA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1
You can also use the cheaper blue sticky tacky for posters, I guess, but I haven't tried that.
$31 on Amazon for 18oz
Just use nails, screws, molly fasteners or some other kind of drywall anchor. When you move, do as /u/krnewman21 says and get something like this to fill the holes. Also, maybe take a chip of paint in and get a sample jar of new paint that's the same color.
My wife swears by Quake Hold putty.
Mobocrat707, meet Quakehold. Quakehold, meet Mobocrat 707
https://www.amazon.com/GYPSUM-380270072-Gypsum-Compound-Off-White/dp/B000PDL6F0/ref=pd_cp_60_2?pd_rd_w=6ymG1&pf_rd_p=ef4dc990-a9ca-4945-ae0b-f8d549198ed6&pf_rd_r=8H8Q8B9AQY1ABEWYG868&pd_rd_r=0c287f59-a7c4-11e9-97ec-85e598983ee7&pd_rd_wg=z3If8&pd_rd_i=B000PDL6F0&psc=1&refRID=8H8Q8B9AQY1ABEWYG868
&#x200B;
https://www.amazon.com/Walboard-Tool-54-007-Drywall-Repair/dp/B003NSBQF4/ref=sr_1_3?crid=3SYGBH6UL94J4&keywords=8x8+drywall+patch&qid=1563279667&s=hi&sprefix=8x8+drywall%2Ctools%2C133&sr=1-3
Quakehold! 88111 Museum Putty Neutral
https://www.amazon.com/gp/product/B0002VA9NA/ref=oh_aui_detailpage_o01_s00?ie=UTF8&amp;psc=1
Museum putty is made for this exact application.
Amazon has it.
In fact the first search result for museum putty is called Quakehold so there you go.
Get some Quake Hold from Home Depot
This stuff
http://www.amazon.com/Quakehold-88111-Museum-Putty-Neutral/dp/B0002VA9NA
What about some of this stuff: http://www.amazon.com/Oleum-274232-Never-Multi-Purpose/dp/B00DNQBFAW
Not glue, museum putty.
Quakehold! Museum Putty
Some kind of museum putty or blu tack?
https://smile.amazon.com/Quakehold-88111-Museum-Putty-Neutral/dp/B0002VA9NA/ref=sr_1_3?crid=3GSDWI8M67Q2R&amp;keywords=earthquake+hold+museum+putty&amp;qid=1557850809&amp;s=gateway&amp;sprefix=museum+earth%2Caps%2C154&amp;sr=8-3
Museum putty:
http://www.amazon.com/Quakehold-88111-Museum-Putty-Neutral/dp/B0002VA9NA
problem solved
$29 for 4 ounces. Rustoleum Neverwet is only $15 for 18 ounces and does the same thing.
We SoCalians invest in Museum Putty. : )
https://www.amazon.com/Quakehold-88111-Museum-Putty-Neutral/dp/B0002VA9NA
Hydrophobic coatings have been a thing for a while. You can do the same thing for much, much cheaper.
Wait till you learn about Mr. Grip.
+1 for board-mounted pots, or board-mounted-something-that-also-attaches-to-the-enclosure.
But for stripboard builds I've been using a few little balls of this putty stuff on the back of the board, it works both to insulate and keep the board in place.
If you don't want to use adhesives, museum putty works too. https://www.amazon.com/Quakehold-88111-Museum-Putty-Neutral/dp/B0002VA9NA
Check out Museum Putty. It is what museums use to hold down artwork and secure it from small earthquakes. Easily removed.
https://www.amazon.com/Quakehold-88111-Museum-Putty-Neutral/dp/B0002VA9NA/ref=sr_1_1?ie=UTF8&amp;qid=1485061346&amp;sr=8-1&amp;keywords=museum+putty
Also cats generally hate sticky stuff. It may not be the most attractive option but apply some double sided tape to the surfaces of the dock. They will soon learn to leave it alone. Expecting parents with cats put double sided tape on cardboard and leave it in the crib and other surfaces they don't want cats to jump on.
Remove the caulk, sand and use a touch up paint https://www.amazon.com/Sheffield-1126-Porcelain-Touch-Up-White/dp/B000BZX28Q
then recaulk.
I would sell it as is and offer no allowances. You can add those to your negotiations. People will know, when they purchase, that things will need redoing.
https://www.amazon.com/Quakehold-88111-Museum-Putty-Neutral/dp/B0002VA9NA Makes a huge difference... not sure if it would hurt the tea things though
There are hydrophobic sprays, which might make a deck last a little longer. It will be immediately destroyed on the nose/tail when you pop off the ground, but it might slow down waterlogging.
My guess is that it wouldn't do much, but it might be worth a shot if you're desperate.
Museum putty. That shit is magic.
edit: link
https://www.amazon.com/Quakehold-88111-Museum-Putty-Neutral/dp/B0002VA9NA
Stock up! 1 package was good for me for about 100 figures. I'd post my display but my friends could identify me from it and I'm a horrible nasty person on reddit.
In addition to your aquarium, anything extremely fragile and valuable (display china plates, heirloom vases, that sorta stuff) that would fall over in a bigger quake, you may want to use Museum / Earthquake putty. http://www.amazon.com/Quakehold-88111-Museum-Putty/dp/B0002VA9NA/ref=sr_1_1?ie=UTF8&amp;qid=1314809160&amp;sr=8-1
Earthquake insurance is very expensive and not really worth it, especially if you are living in an apartment and have renters insurance (i.e. don't need to worry about rebuilding a home in a worst case scenario). The building codes and the 1989 Loma Prieta quake basically make it so that unless you are living on fill there is nothing to worry about your home falling down. If you're very unlucky your foundation may crack (thus the reason for earthquake insurance), but most likely even in a big quake any building you are in will at worst have cracks in the walls.
So that being said taking small, simple precautions is worth it, but no one thinks or worries about earthquakes on a daily (or even yearly) basis.