Reddit mentions: The best xbox one faceplates, protectors & skins
We found 78 Reddit comments discussing the best xbox one faceplates, protectors & skins. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 36 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. eXtremeRate Gray Rubberized Right Left Side Rails, Replacement Rear Handle Grips, Back Panels Faceplates Kits for Xbox One Elite Controller (Model 1698)
- Compatibility Models: Check the second picture of the listing before purchase. Only compatible with Xbox One Elite controller (Model 1698); Not compatible with Xbox One standard, Xbox One S and Xbox One X controller
- Fits Perfectly: Fit the best by far; Completely fits flush on all side; Sit properly on all the clips
- Package Includes: 1* Right side rails; 1* left side rails; 1* blue tip tool. (Important: The controller and other parts are not included)
- Easy Installation: No opening shell or any complicated action is needed to install these panels; Get installation video guide by searching 'Xbox One Elite Side Rails - Extremerate' or 'tW1MPee2rBA' on Youtube
- Personalized Feature: Rubberized side rails can enhance hand feeling and improve your gaming experience
Features:
Specs:
Color | Gray |
Height | 0.5905511805 Inches |
Length | 6.1023621985 Inches |
Weight | 0.03 pounds |
Width | 3.543307083 Inches |
2. Painted Faded and Cracked USA American Flag - Decal Style Skin fits Microsoft XBOX One Wireless Controller (CONTROLLER NOT INCLUDED)
- Pro Grade Skin - Covers front Controller
- Premium vinyl covered with glossy protective laminate protective layer.
- Thin and strong, does not effect game play.
- Made in the U.S.A.
- CONTROLLER NOT INCLUDED - Does NOT fit XBOX One Elite Controller - Skin does not cover back of controller
Features:
Specs:
Height | 4.21 Inches |
Length | 0.03 Inches |
Width | 5.96 Inches |
3. KontrolFreek Performance Grips for Xbox One | Black
PERFORMANCE GRIPS - are advanced controller grips that utilize a combination of advanced materials that give gamers better grip, support and comfortEASY TO APPLY - and can be repositioned and removed without leaving a sticky residueMOISTURE WICKING - combination of advanced proprietary materials to ...
Specs:
Color | Nightfall Black |
Height | 0.07874 Inches |
Length | 0.23622 Inches |
Weight | 0.05291094288 Pounds |
Width | 0.3937 Inches |
4. ModFreakz® Shell Kit Gloss White/Black For Xbox One Model 1537 Controllers
FOR GENERATION 1 CONTROLLERS ONLY: Model Number 1537This kit includes a full shell case set, direction pad, ABXY button parts, 2 analog sticks (thumb sticks), right and left trigger, right and left bumper buttons, view button, menu button, and sync buttonBeautiful custom designed controller housing ...
Specs:
Height | 2.6 Inches |
Length | 6.4 Inches |
Weight | 0.4 Pounds |
Width | 4.1 Inches |
5. eXtremeRate Black Soft Anti-Slip Silicone Cover Skins, Controller Protective Case for New Xbox One Elite Series 2 with Thumb Grips Analog Caps
- High quality silicone case for Xbox One Elite controller Series 2. Charging dock compatible. Important: This product does not fit the controller when it is with a headphone adapter
- This controller case can keep player hands from slipping when they are playing games with the studded handle section. It also nice for sweaty hands
- Provides improved feel and grip during playing games
- Personalize your controller and protect your controller with normal drops and scratches during use
- Come with 1pcs silicone controller case and 1 pair thumb grips
Features:
Specs:
Color | Black |
Height | 0.5905511805 Inches |
Length | 3.93700787 Inches |
Weight | 0.0661386786 Pounds |
Width | 1.968503935 Inches |
Size | Elite V2 |
6. eXtremeRate Red Shadow Soft Touch Replacement Faceplate Front Shell for Xbox One Elite Controller Model 1698
Compatibility Models: Compatible with Xbox One Elite controller (Model 1698); Not compatible with standard Xbox One, Xbox One X & Xbox One S and Xbox One Elite series 2 controllerFits Perfectly: Fit the best by far; Completely fits flush on all side; Sit properly on all the clipsPackage Includes: 1*...
Specs:
Color | Shadow Red |
Height | 0.5905511805 Inches |
Length | 6.1023621985 Inches |
Weight | 0.075 Pounds |
Width | 4.5275590505 Inches |
7. eXtremeRate Soft Touch Grip Orange Front Housing Shell Faceplate for Xbox One Elite Controller withThumbstick Accent Rings - Model 1698
Compatibility Models: Compatible with Xbox One Elite controller (Model 1698); Not compatible with standard Xbox One, Xbox One X & Xbox One S and Xbox One Elite series 2 controllerFits Perfectly: Fit the best by far; Completely fits flush on all side; Sit properly on all the clipsPackage Includes: 1*...
Specs:
Color | Orange |
Height | 0.5905511805 Inches |
Length | 6.1023621985 Inches |
Weight | 0.075 Pounds |
Width | 4.5275590505 Inches |
8. eXtremeRate Orange Soft Touch Left Right Panel Handle Side Rails Replacement Parts for Xbox One Controller
Compatibility Models: (Check the second picture of the listing before purchase.) Compatible with Standard Xbox One Controller with 3.5 mm headphone jack & Standard Xbox One Controller without 3.5 mm headphone jack. Not compatible with Xbox One S, Xbox One X & Xbox One Elite controllerFit Perfectly: ...
Specs:
Height | 0.5905511805 Inches |
Length | 2.755905509 Inches |
Weight | 0.0661386786 Pounds |
Width | 3.543307083 Inches |
9. eXtremeRate Patterned Front Housing Shell Faceplate for Xbox One Elite Controller Model 1698 with Thumbstick Accent Rings - The Great Wave
- Compatibility Models: Compatible with Xbox One Elite controller (Model 1698); Not compatible with standard Xbox One, Xbox One X & Xbox One S and Xbox One Elite series 2 controller
- Fits Perfectly: Fit the best by far; Completely fits flush on all side; Sit properly on all the clips
- Package Includes: 1* Xbox One Elite controller faceplate shell; 1* T8H screwdriver; 7* screws; 2* Accent rings. (Important: The Xbox One Elite controller, tools and other parts are not included)
- Installation Skills Required: Required customers to take apart the xbox one elite controller to install this front housing shell; Required customers handy with controller modifications; Get installation video guide on Youtobe by searching “Extremerate Elite Shell”
- Personalized Feature: The great wave patterned looks great; Great smooth grip, soft touch in hand and feels silky; Anti slip, sweat free for a long period game playing
Features:
Specs:
Color | The Great Wave |
Height | 0.6299212592 Inches |
Length | 6.1023621985 Inches |
Weight | 0.08 Pounds |
Width | 4.5275590505 Inches |
10. YTTL® Silver Chrome Controller Housing Shell for Microsoft XBOX ONE Wireless Controller with 3.5 mm headsets jack
- 100% fits for Microsoft Xbox One Original Controller with 3.5 mm headsets jack.
- if your controller not have 3.5 mm headsets jack, it's not fit
- Chrome Silver cool awesome shell to refresh your controller
- Great custom replacements for xbox one controller. You deserve it
- the open shell tool with T8 and T6 screwdriver is free
Features:
Specs:
Weight | 1.10231131 Pounds |
11. Gam3Gear Pattern Series Decals Skin Vinyl Sticker for Xbox ONE Console & Controller (NOT Xbox One Elite / Xbox One S / Xbox One X) - Wood V5
- The stoppy is incredibly versatile and will fit into any gap up to 9cm which means it will hold any door or window in your home in position.
- Made of a durable rubber the stoppy will grip onto any surface - including carpet, ceramic tiles, vinyl and laminate - and it never leaves a mark.
- It is completely safe around children and pets and can be used indoors and outdoors.
Features:
Specs:
Height | 6.5 Inches |
Length | 11.54 Inches |
Width | 0.12 Inches |
12. eXtremeRate Soft Anti-Slip Dark Blue Silicone Controller Cover Skins Thumb Grips Caps Protective Case for Microsoft Xbox One X & One S Controller Blue
- High quality silicone case for Xbox One X & One S controllers. Important: This product does not fit the controller when it is with a headphone adapter
- This controller case can keep player hands from slipping when they are playing games with the studded handle section. It also nice for sweaty hands
- Specifically designed to fit exactly over the Xbox One X & One S controller
- Provides improved feel and grip during playing games and protects your controller from bumps and scrapes
- Come with 1 sets silicone thumb stick grip caps for free
Features:
Specs:
Color | Blue |
Height | 0.393700787 Inches |
Length | 5.905511805 Inches |
Weight | 0.0661386786 Pounds |
Width | 3.543307083 Inches |
13. eXtremeRate Custom Design Unique Chameleon Purple Blue Top Shell Front Housing Replacement Faceplate for Xbox One Elite Controller with Thumbstick Accent Rings - Model 1698
Compatibility Models: Compatible with Xbox One Elite controller (Model 1698); Not compatible with standard Xbox One, Xbox One X & Xbox One S and Xbox One Elite series 2 controllerFits Perfectly: Fit the best by far; Completely fits flush on all side; Sit properly on all the clipsPackage Includes: 1*...
Specs:
Color | Chameleon Purple Blue |
Height | 0.5905511805 Inches |
Length | 6.1023621985 Inches |
Width | 4.5275590505 Inches |
14. A B X Y Buttons Letters Mod Menu Button for Xbox One Xbox One S Slim Elite Controller (White with Grey)
Buttons For XBox One /XBox One S / XBox One Elite ControllerABXY ButtonsRepair your broken ABXY ButtonsButtons with Letters Mod Kit
15. Vanknight Xbox One X Console Remote Controllers Skin Set Dragon Ball Vinyl Skin Decals Sticker Cover for Xbox One X(XB1 X) Console
This is a vinyl material decal for Xbox One X CONSOLE ONLY. NOT FOR Regular Xbox One or Xbox One S.High quality vinyl material, easy to stick and remove, no scratches left.Precision cut, easy access for buttons, controls, connectorsProtect your whole console and controllers from dust and scratchesCo...
Specs:
Height | 0.39 Inches |
Length | 11.81 Inches |
Width | 12.99 Inches |
Number of items | 1 |
16. Vanknight Xbox One S Slim Console Remote Controllers Skin Set Vinyl Skin Decals Sticker Cover
This is a vinyl material decal for XB 1 S Console ONLY.NOT for Regular XB1 or XB1 XHigh quality vinyl material, easy to stick and remove, no scratches left.Precision cut, easy access for buttons, controls, connectorsProtect your whole console and controllers from dust and scratchesComes with 1 set o...
Specs:
Height | 0.393700787 Inches |
Length | 9.842519675 Inches |
Weight | 0.18 Pounds |
Width | 5.511811018 Inches |
17. Vanknight Xbox One S Slim Console Remote Controllers Skin Set Vinyl Skin Decals Stciker Cover for Xbox One Slim (XB1 S) Console
This is a vinyl material decal for XB One S CONSOLE ONLY. NOT FOR Regular XB One or XB XHigh quality vinyl material, easy to stick and remove, no scratches left.Precision cut, easy access for buttons, controls, connectorsProtect your whole console and controllers from dust and scratchesComes with 1 ...
Specs:
Height | 0.39 Inches |
Length | 11.81 Inches |
Weight | 0.18 Pounds |
Width | 11.02 Inches |
18. Vanknight Xbox One S Slim Console Remote Controllers Skin Set Vinyl Skin Decals Stciker Cover for Xbox One Slim (XB1 S) Console
This is a vinyl material decal for XB One S CONSOLE ONLY. NOT FOR Regular XB One or XB XHigh quality vinyl material, easy to stick and remove, no scratches left.Precision cut, easy access for buttons, controls, connectorsProtect your whole console and controllers from dust and scratchesComes with 1 ...
Specs:
Height | 0.39 Inches |
Length | 11.81 Inches |
Weight | 0.18 Pounds |
Width | 11.02 Inches |
19. Dust Cover by Foamy Lizard174; The Original Made in U.S.A. TexoShield (TM) Premium Soft Lining XB1 Nylon dust Guard Cover [USPTO Patent Pending] with Back Cable Port (Horizontal)
- Custom designed to perfectly fit the Xbox One and Xbox One Elite console external dimensions, **DO NOT use while console is powered on**
- Durable exterior with soft/smooth internal lining material to protect your console from dust, minor scratches, UV, liquids (repellent) and dirt.
- Back panel cutaway allows for protection without having to remove back cables
- Proudly designed and manufactured in the U.S.A. [PATENT PENDING]
Features:
Specs:
Height | 13.50391 Inches |
Length | 10.35431 Inches |
Weight | 0.125 Pounds |
Width | 3.1496 Inches |
20. eXtremeRate Custom Design Unique Chameleon Purple Blue Glossy Top Shell Case Front Housing Replacement Faceplate Kits Xbox One Remote Controller Cover
- COMPATIBILITY MODEL: Ultra fits for Standard Xbox One controller with and without 3.5 mm headphone jack; Not compatible with Xbox One Elite controller & Xbox One S Controller.Check the second picture of the listing before purchase
- FITS PERFECTLY: Fit the best by far; Completely fits flush on all side; Sit properly on all the clips
- PACKAGE INCLUDES: 1 * Standard Xbox One controller faceplate shell; 7 Screws; 1 Screwdriver(IMPORTANT: The Xbox One controller and other parts are not included)
- INSTALLATION SKILLS REQUIRED: Required customers to take apart the Xbox One controller to install this front housing shell; Required customers handy with controller modifications
- PERSONALIZED FEATURE: Chameleon glossy vibrant color; It changes color in different lighting beautifully
Features:
Specs:
Color | Chameleon |
Height | 0.6299212592 Inches |
Length | 6.1023621985 Inches |
Width | 4.330708657 Inches |
🎓 Reddit experts on xbox one faceplates, protectors & skins
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where xbox one faceplates, protectors & skins are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
You guys have all been a great help!
After doing some more browsing, I have settled on these two products -
http://www.amazon.com/dp/B015ZSZ1WI/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=13JJ7QD4XZ9FW&coliid=I1LVTMFS7LR37R
http://www.amazon.com/dp/B00WJVWFI8/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=13JJ7QD4XZ9FW&coliid=I21QJALK89RNCN
I am basically going to replace the front plate and grips with the matte white cover, and then install the black buttons that come with it, as well as install the gold D-pad and triggers that I am ordering.
If you can't tell, my inspiration is the Lunar white controller they have, but for a fraction of the cost.
Wish me luck! And I may post a build thread if I remember to so you can see the final product!
Thanks guys
That's pretty interesting. Thanks.
>more often the problems with those are software/firmware based that can take three to four weeks.
Do you think the buttons not registering could be due to firmware and could be fixed with an update? That's the only issue I have with mine that I've noticed. Y button doesn't register all the time and my thumbsticks on the app lag/get stuck for a split second.
I bought mine through Costco and they have lifetime returns so I'm not sure if the ms warranty is worth it? I'd have to rent a car and drive over an hour to get to my closest one so that brings up the price significantly.
Also I use this controller skin and think it's so much more comfortable with it. It's funny bc the reason I bought it was bc of the grips showing signs of peeling on the v1 but I love it.
You can get pretty decent face plates on amazon for around $15, I put a red and black one on mine and the texture of it is pretty nice.
Here’s a link: eXtremeRate Red Shadow Soft Touch Replacement Faceplate Front Shell for Xbox One Elite Controller https://www.amazon.com/dp/B071CLCQW3/ref=cm_sw_r_cp_api_i_xn0qDbHQDDMJB
unfortunately there is no real easy or quick fix for this. This happens because of the "re-designed" bumpers in the 3.5 mm controllers, making them "easier" to push, both bumpers are actually one piece of flimsy plastic. Looks like the bumper snapped off. If you have the T8 screw driver you can open it up and super glue the bumpers back together, but this is only a temporary fix because they will snap again, mine lasted about a month. I had to buy this just for the replacement bumpers, so far they've worked great since I've replaced them back in April.
>(why can't they last a year...)
As for that I have found the older controllers, pre 3.5mm jack, to me way more reliable.
Here’s what I ordered specifically:
Faceplate - eXtremeRate Soft Touch Grip Orange Front Housing Shell Faceplate for Xbox One Elite Controller withThumbstick Accent Rings https://www.amazon.com/dp/B071GTZRV6/ref=cm_sw_r_cp_api_LPtLBbBQ506CP
Side rails - eXtremeRate Orange Soft Touch Left Right Panel Handle Side Rails Replacement Parts for Xbox One Controller https://www.amazon.com/dp/B01CZLH43M/ref=cm_sw_r_cp_api_NQtLBbR7HKKD0
You can look through that seller’s items (or any comparable seller’s) for different colors/styles.
The side rails have an extra tab on the original controllers compared to the elite so you’ll have to break one off. Be careful though, it took me two tries on the side rails to get the right ones. The S style controllers and original style have slightly different molds and the seller mixed them up on me the first time.
I highly recommend the “soft touch” finishes for all controllers. That’s the style that the original elite faceplate has. Swapped out all of the controllers in my house (except the Minecraft creeper controller) with soft touch faceplates and side rails.
I have an "American Flag" one, that I got as a b-day gift, so I didn't know they were <$10.00.
It's pretty durable, and feels like a laptop skin, if you have one of those. Putting it on was a little bit of a pain, as I kept getting "bubbles" on the ends and it doesn't quite cover the whole "face" of the controller, so you can get some wrinkles where the controller curves, if you aren't careful. But for that price, they are worth a shot if you're interested.
edit: This is the one I got. http://www.amazon.com/Painted-Faded-Cracked-USA-American-Flag/dp/B00HXIAGG0/ref=pd_sim_vg_1?ie=UTF8&amp;refRID=0JQ4X6YCBN81GTG2G68Y
Don’t buy SCUF. They’ll disintegrate within a few months. Go to Amazon and find some OEM side rails. If you don’t want to fork out $40 for the OEM parts; there are some that are nearly identical to OEMs and cost the same as the SCUF grips.
Here: https://www.amazon.com/dp/B01M0Q0QI8/ref=cm_sw_r_cp_api_i_r.GhDbCB3VBQZ
Yes, the SCUF grips are cheap and feel great out of the box. I thought the same thing. Then a few months in, the rubber on one of the thumbsticks felt loose and started to pull away from the metal. Even then, I told myself “no biggie, I’ll just replace it with another thumbstick.” Then another thumbstick went. Suddenly, the grips started to feel like they’d expanded. They had. The rubber had deformed and expanded like a sponge. On top of all that, the SCUF logo pattern had taken on a ton of grime that I’d never gotten on my stock elite grips.
All of that happened within six months. I’m a neat freak and make a legitimate effort to keep my stuff clean. Save yourself the headache of having to replace your grips in six months and just order OEM parts. Anything but SCUF.
eXtremeRate Patterned Front Housing Shell Faceplate for Xbox One Elite Controller with Thumbstick Accent Rings - The Great Wave https://www.amazon.com/dp/B07D8MD1C1/ref=cm_sw_r_cp_apa_i_MqyWDbRBFDNZ6
u/babyrcf $15🤙🏼 Edit: Remember this is specific to the xbox elite controller.👍🏻
I got these for mine and they look like the originals. Hopefully they ship to NZ
EDIT: Easy to install too. Took less than 5 min.
Owned mine for 2 years. It seems I am the exception to not have any issues. If you are worries about the grips coming off you can buy exterior grips for the controller that I actually like. https://www.amazon.com/gp/product/B00ZJ7RQEW/ref=oh_aui_search_asin_title?ie=UTF8&psc=1
&#x200B;
Love mine but then again it has been a tank of performance for me... bought it used off ebay too haha
https://smile.amazon.com/eXtremeRate-Rubberized-replaceable-Faceplates-Controller/dp/B01M0Q0QI8
I bought these grips a week or two ago and they work perfectly. It sure about the faceplate though.
I don't dislike woodgrain. I dislike making plastic look like woodgrain using stickers or other types of unconvincing fake veneer. ;)
&nbsp;
It all comes down to the details.
&nbsp;
For example:
&nbsp;
See the difference? The difference between 1 and 2 is like the difference between pre-1.3 and post-1.3 textures in No Man's Sky. 1 looks like wood, but 2 looks like it's supposed to be wood. 3 looks like wood but the effect is ruined by the visible plastic that tell the viewer that it's not wood.
&nbsp;
To me, it's all about whether it makes the thing look like it's legitimately made of wood, versus having a "fake wood" veneer. Looks "real" = cool; looks "fake" = cringe. Again, this is all just my own opinion. This is descriptive of my preferences, NOT prescriptive of what yours should be.
Hi, this is the one I use: https://www.amazon.co.uk/dp/B01N4GUG2N/ref=cm_sw_r_em_tai_c_OTGpDbHW2V9TD
All the best! 😺💫🚀
Thanks! I used krylon plastic spray paints, rustoleum 2x clear enamel, and 1000 grit sand paper
Controller parts:
https://www.amazon.com/dp/B07JBD9GQH/ref=cm_sw_r_cp_api_i_zYg4Cb5YCR6NJ
White buttons:
https://www.amazon.com/dp/B07CR3R7TR/ref=cm_sw_r_cp_api_i_5Zg4CbAS5RTVY
Edit:
To get the splash I sprayed into a plastic cup so I got a little pool and then just flicked the cup so it splattered
Real easy fix. Just gotta order replacements, as annoying as that is.
https://www.amazon.com/eXtremeRate-Rubberized-replaceable-Faceplates-Microsoft-Controller/dp/B01M0Q0QI8/ref=sr_1_2?ie=UTF8&amp;qid=1495821864&amp;sr=8-2&amp;keywords=elite+controller+grips
These are what I ordered, and they worked great. Unfortunately they run out of stock easily, so timing is key. However, it's a really easy fix. Just pop those suckers off and replace.
red Goku XB1
Boys in Blue XB1S
Vegeta PS4
Vegeta XB1S
PS4 PRO Goku
XB1S Goku
RES.F PS4 Pro
Goku Black and Blue PS4
Rosé Switch
Multi PS4 Pro
XBOX1X Gold Goku
PS4 Pro Kami Classic
Father and Son PS4
Show us your consoles or link any skins from Amazon below !!!!
these were perfect replacements
https://www.amazon.com/gp/product/B01M0Q0QI8/ref=oh_aui_search_detailpage?ie=UTF8&amp;psc=1
I think this is what he's talking about. This is UK but shouldn't be hard to find on Amazon in the US.
https://www.amazon.co.uk/gp/aw/d/B01M03EY72/ref=mp_s_a_1_6?ie=UTF8&amp;qid=1481602765&amp;sr=8-6&amp;pi=AC_SX236_SY340_QL65&amp;keywords=xbox+one+elite+controller+grips&amp;dpPl=1&amp;dpID=51EFI6tzhwL&amp;ref=plSrch
Edit; scratch that. Found it on Amazon in the US. It does say it's currently unavailable, but if you scroll down just a little bit under where it says currently unavailable it does have 1 that's new at just under $10 from the same supplier. Here's the link for that.
https://www.amazon.com/gp/aw/d/B01M0Q0QI8/ref=mp_s_a_1_2?ie=UTF8&amp;qid=1481603117&amp;sr=8-2&amp;pi=SY200_QL40&amp;keywords=xbox+one+elite+controller+grips&amp;dpPl=1&amp;dpID=51EFI6tzhwL&amp;ref=plSrch
In stock December 17
I bought these:
https://www.amazon.com/eXtremeRate-Rubberized-Replacement-Faceplates-Xbox-One/dp/B01M0Q0QI8/ref=sr_1_4?keywords=xbox+elite+controller+replacement+parts&qid=1571141024&sr=8-4
They're really good
Here's the same thing for half price. I bought them and can't see a difference between these and the original Elite ones.
https://www.amazon.com/eXtremeRate-Rubberized-Replacement-Faceplates-Xbox-One/dp/B01M0Q0QI8/ref=pd_sbs_147_1/132-4836104-3727462?_encoding=UTF8&pd_rd_i=B01M0Q0QI8&pd_rd_r=057f78fc-6045-4d45-8bbc-0cb5d3de9765&pd_rd_w=NAE6J&pd_rd_wg=ttaiU&pf_rd_p=d66372fe-68a6-48a3-90ec-41d7f64212be&pf_rd_r=3F6W3Q3A9XJYW9V417ZM&psc=1&refRID=3F6W3Q3A9XJYW9V417ZM
I cover mine, fits like a glove http://amzn.com/B00NB7QSRS just not while it's on obv
I have a the same controller it’s just a faceplate you can buy I got mine from amazon.
eXtremeRate® Custom Design Unique Chameleon Chamillionaire Top Shell Front Housing Replacement Faceplate for Xbox One Elite Controller https://www.amazon.co.uk/dp/B06ZZXTG57/ref=cm_sw_r_cp_api_6luRAbPVNDWQ7
or this one is cool also
eXtremeRate® Custom Design Unique Chameleon Chamillionaire Glossy Top Shell Case Front Housing Replacement Faceplate Kits for Xbox One Remote Controller Cover https://www.amazon.com/dp/B01N4GJRX2/ref=cm_sw_r_cp_apa_SewRAbVK20EJ1
search on US amazon: https://www.amazon.com/eXtremeRate-Chameleon-Chamillionaire-Replacement-Controller/dp/B06ZZXTG57/
Amazon: https://www.amazon.com/gp/aw/d/B06ZZXTG57/ref=sxts_2?ie=UTF8&amp;qid=1527558641&amp;sr=2&amp;pi=AC_SX236_SY340_QL65
You can buy the faceplates on amazon https://smile.amazon.com/eXtremeRate-Chamillionaire-Replacement-Xbox-One-Controller/dp/B01N4GJRX2/ref=sr_1_9?crid=1C9QGU790KV4I&amp;keywords=xbox+one+controller+skin&amp;qid=1570860247&amp;sprefix=xbox+one%2Caps%2C211&amp;sr=8-9
KontrolFreek Performance Grips for Xbox One Controller
I got it on Amazon.
KontrolFreek Performance Grips for Xbox One Controller https://www.amazon.com/dp/B00ZJ7RQEW/ref=cm_sw_r_cp_apa_i_SQ7BDb47DKW9V
Exact grip replacements on amazon. $25.99. CAD
LINK: https://www.amazon.ca/gp/aw/d/B01M0Q0QI8?psc=1&amp;ref=ppx_pop_mob_b_asin_title
eXtremeRate Gray Rubberized Right Left Side Rails, Replacement Rear Handle Grips, Back Panels Faceplates Kits for Xbox One Elite Controller (Model 1698) https://www.amazon.com/dp/B01M0Q0QI8/ref=cm_sw_r_cp_api_i_OZk1DbKD611KA
https://www.amazon.com/dp/B01M0Q0QI8/ref=cm_sw_r_cp_apa_i_SdZqDbG6KKM39
Is this what you're looking for?
Dust cover when not in use.
http://www.amazon.com/Lizard-ORIGINAL-TexoShield-premium-PENDING-Horizontal/dp/B00NB7QSRS
I just got these about a month ago, had the controller since launch, I think my kid started picking at the grip.
$20
https://www.amazon.com/gp/product/B01M0Q0QI8/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/eXtremeRate-Rubberized-Replacement-Faceplates-Xbox-One/dp/B01M0Q0QI8/ref=mp_s_a_1_3?keywords=xbox+elite+controller+grip+replacement&amp;qid=1571246350&amp;sr=8-3
Sorry boys!
https://www.amazon.com/eXtremeRate-Rubberized-Replacement-Faceplates-Xbox-One/dp/B01M0Q0QI8/ref=sr_1_4?crid=TW1Z7GZAWH3P&keywords=xbox+elite+controller+replacement+parts&qid=1565741617&s=gateway&sprefix=xbox+elite+controller+replacement%2Caps%2C176&sr=8-4
I bought these replacement grips and they look exactly like the ones that came with the controller. You just pop off plastic pieces on the controller and snap these replacements on. Still annoying that this happens in the first place, but if you don't want to send your controller in or Microsoft won't help you out, this is an option.