#7 in Computer internal SCSI port cards
Use arrows to jump to the previous/next product

Reddit mentions of Adaptec 2248700-R U320 PCI Express X1 1-Channel SCSI Host Bus Adapter

Sentiment score: 2
Reddit mentions: 5

We found 5 Reddit mentions of Adaptec 2248700-R U320 PCI Express X1 1-Channel SCSI Host Bus Adapter. Here are the top ones.

Adaptec 2248700-R U320 PCI Express X1 1-Channel SCSI Host Bus Adapter
Buying options
View on Amazon.com
or
Device Type: Storage controller - plug-in card - low profileInterface Type: PCI Express x1Dimensions (WxDxH): 6.6 in x 2.6 inData Transfer Rate: 320 MBpsController Interface Type: Ultra320 SCSI
Specs:
Height1 Inches
Length1 Inches
Weight0.73 Pounds
Width1 Inches

idea-bulb Interested in what Redditors like? Check out our Shuffle feature

Shuffle: random products popular on Reddit

Found 5 comments on Adaptec 2248700-R U320 PCI Express X1 1-Channel SCSI Host Bus Adapter:

u/AttackTribble · 9 pointsr/talesfromtechsupport

You can get PCIe SCSI cards, and SCSI is designed to be backwards compatible. You would need to find an adapter though.

http://www.amazon.com/Adaptec-2248700-R-Express-1-Channel-Adapter/dp/B000NX3PII

u/DerBootsMann · 2 pointsr/sysadmin

Nice! Here's one for free! I mean I don't see how I could charge you for pointing out at something!

https://www.amazon.com/Adaptec-2248700-R-Express-1-Channel-Adapter/dp/B000NX3PII

u/charonpdx · 1 pointr/VintageApple

You'd need a SCSI card in the PC.

If you have an older PC with a conventional PCI slot (pre-PCI Express,) SCSI cards are cheap and readily available on eBay.

If your only PC is a newer one, you'd need either a PCI Express SCSI card (not cheap) or an old USB SCSI adapter (really not cheap) then adapter cables to convert the "external SCSI" to an internal SCSI, or the high-density internal connector to the bigger/lower-density connector on the drive.

u/bagofwisdom · 1 pointr/pcmasterrace

That's an 80 pin SCSI drive. Making this work in your PC isn't worth the expense. There is no adapter to go from SATA controller to SCSI drive. You'd need a SCSI controller, which was obsolete when PCIe came out. However, you're in luck as controllers are still made. If this is a 10k or 15k RPM drive it's going to be super loud and super hot. I also never trust used hard drives to last long at all. You'll need a SMART report on the drive and hope it logs its power up/down counts and run times.