Reddit mentions of Inkbird ITC-308 Temperature Controller with IHC-200 Humidity Controller
Sentiment score: 3
Reddit mentions: 5
We found 5 Reddit mentions of Inkbird ITC-308 Temperature Controller with IHC-200 Humidity Controller. Here are the top ones.
or
- 🙌🙌【Temperature】Temperature controller is ON/OFF model. You can connect heat and cool devices which can work separately.
- 🙌🙌【Humidity】 Humidity controller is ON/OFF model. You can connect humidifier and dehumidifier which can work simultaneously or separately.
- 🙌🙌【Calibration】Both of them have the calibration function. You can calibrate what you need.
- 🙌🙌【Alarm & Delay Function】 They can alarm if the temperature or humidity level is over what you set. Cool and dehumidification delay function can extend your device's life.
- 🙌🙌【Multiple Use】Widely used for mushroom, mini greenhouse,etc.
Features:
Specs:
| Color | Blue White Green |
| Size | ITC-308+IHC-200 |
Okay so I had an extra minifridge laying around, which is where the plan started.
I then got
the Inkbird temperature & humidity controllers
a cheap little humidifier that activates as soon as you power it
[a dehumidifier (as I also use the chamber for curing meats sometimes)]
(https://www.amazon.com/gp/product/B07CPQMMR2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
and then also a regular incandescent lightbulb on a lantern cord
So how it works is the temperature and humidity controllers each have two power sockets, one that activates when the temp/humidity goes lower than what you set it to, and the other when it gets higher.
So I plug the fridge itself in to the high temp socket,
the lightbulb in to the low temp socket,
the humidifier in to the low humidity socket,
and the dehumidifier in to the high humidity socket
The humidity controllers sit on the bottom of the fridge, and the lightbulb is hung from the top.
I then took off the door of the fridge and ran all the wires between the door and the body, and then put the door back on. All the wires are hidden in a box sitting on top of the fridge, and the Inkbird control units sit next to it.
I have some koji growing in it right now but when it's all done I can pull it out of the corner and take some pics of the setup
Temp and humidity controllers. Inkbird ITC-308 Temperature Controller with IHC-200 Humidity Controller with Outlet, 10A 120V 1100W https://www.amazon.com/dp/B01N56KEU6/ref=cm_sw_r_cp_apa_i_xW16CbEFMTR7S
Use the humidity controller on the humidifier. And buy a fan speed controller for your fan.
I'm not sure if this is available in Australia but this is the combo I have for my cheese fridge https://www.amazon.com/gp/product/B01N56KEU6/
I have the humidistat hooked up to https://www.amazon.com/gp/product/B00PAK245E/ inside a 1 gallon self-filling dog bowl with a usb fan blowing on it. I couldn't get a regular humidifier to keep up with the fridge, but this setup will keep 85% RH even when the fridge is running
Nice. You going with Alibaba QBs or HLG? Have you used these for temp/humidity? https://www.amazon.com/dp/B01N56KEU6/ref=cm_sw_r_cp_apa_i_ODHlDbV3P9ZGP
I was thinking about running my inline fan and a small space heater (winter grow in wood stove cabin) off the temperature controller and then humidifier/dehumidifier off the humidity control.
Hello guys. Thanks for joining. This time the giveaway is ended. The winners are u/rohofosho & u/static_Illmatic . Congratulations! I will PM you, please check your message. Hope you guys have a good day. (If the winner does not reply within 72h, we will re-draw the winner at random.)
Here is 15% off coupon code for WiFi ITC-308 temp controller if you interested: 56NLH799 https://amzn.to/32mxhtW
15% coupon code for IHC-200 humidity controller: DO2DUYOC https://www.amazon.com/dp/B01FQKXRXA
15% coupon code for ITC308+IHC-200 suit: XNVLPIHU https://www.amazon.com/dp/B01N56KEU6
Thanks all !٩(๑>◡<๑)۶