Reddit mentions of MaxPower 336579B Steel Piston Stop Tool Replaces Stihl 1107-191-1200
Sentiment score: 0
Reddit mentions: 1
We found 1 Reddit mentions of MaxPower 336579B Steel Piston Stop Tool Replaces Stihl 1107-191-1200. Here are the top ones.
or
- Tool for locking pistons
- 14mm tread machined steel
- Locks pistons in 2-Cycle engines to help the removal of clutches & flywheels
- No assembly required
Features:
Specs:
| Height | 0.75 Inches |
| Length | 2.75 Inches |
| Weight | 0.23 Pounds |
| Width | 0.75 Inches |
Sure! To do it you will need a piston stop. This is that I used. You take out the spark plug and thread it in it’s place. Then you’ll want to unbolt the kick starter (10mm) and unbolt the 8mm bolts that hold the black cover on. Be sure to push against the kick starter rod when pulling the cover off or you might mess up the gears inside and it’s a pain to get them back to the right place, (ask me how I know lol). You should see a 17mm nut on the left side. You will want to remove that nut and washer. Then the variator should slide off. You’ll need to unscrew the cover. It might be stuck on there pretty good, so you can take a flathead screwdriver and push against it from the other side. It’ll come off. Here are some pictures of the Variator and where it is on the bike. You’ll see where the six slots hold the weights. You’ll just need to pull three out and then drill the holes in the other three. Then slap it back on and put the BX31 belt on as well and you should be all done.