Reddit mentions of MELASTA 2 packs 11.1V 1500mAh 40C 3S LiPo Battery with XT60 Plug for RC Car,Skylark m4-fpv250,Mini Shredder 200,Qav250,Vortex,Drone and FPV.
Sentiment score: 0
Reddit mentions: 2
We found 2 Reddit mentions of MELASTA 2 packs 11.1V 1500mAh 40C 3S LiPo Battery with XT60 Plug for RC Car,Skylark m4-fpv250,Mini Shredder 200,Qav250,Vortex,Drone and FPV.. Here are the top ones.
or
Parameter: 11.1v 3S 1500mAh Lipo battery; peak discharge rate: 40C, Charge Plug: JST-XH-4P; Discharge plug: XT60 connector; Battery Dimension: 2.69*1.01*1.36inchs,Weight:120g/0.27lbAdvanced Material: Superior Japan and Korea Lithium Polymer raw materials, Anode is made with 100% Co,Separato is used Korea imported material,aluminum laminate film is used Japan imported material,.Fast charge at 4C,lifetime up to 150 times minimum,high energy electrolyte,up to 200Wh/kg energy density. 12AWG strong silicone lines.Wide Fitting: Specially designed for RC Hobby, RC Car, RC Buggy, RC Truck, RC Truggy, Skylark m4-fpv250, Mini Shredder 200, Indy250 plus mojo 280, Qav250, QAV180/210,Vortex 285,Mini H,Vortex,FLIP FPV 250S MINI, Emax nighthawk 250, FLIP FPV FRAME,Drone, ZMR 250,VECTOR 250,FPV, etc.(Only if the voltage, dimension and the plug match, then it will fit)Great Warranty:We guarantee within 30 days for a full refund if you are not satisfied and offer with 12-Months Limited Warranty.Certificated: CE,UL,UN38.3,MSDS Certificated
Specs:
| Height | 1.36 Inches |
| Length | 2.69 Inches |
| Width | 1.01 Inches |
Guide
Motors
Xt60 (Sub for your connector if your lipo isn't an Xt60, or carefully resolder your lipo - NEVER CROSS THE STREAMS! - so it is)
Wire
Heat Shrink
Switch (Genuine Omron Switch )
Epoxy Putty (to mount switch)
Flywheel Cages
And Wheels: Artifact, OOD Insutanto, Worker, CC Cyclone
Also good to have an Alarm, I'm partial to the style listed so you can check voltage between rounds and leave it off the rest of the time, though he sells others.
Also a good battery setup for up to 60 Amps motor draw, according to /u/LukeKoboJobo:
>I'm in love with these lipos paired with these expanded trays. They fit together perfectly.
Some footnotes: You don't need wheels, cage, or motors right away, but plan for the motors to go bad at some point if you don't. DO NOT replace just the wheels & cage if you're not replacing the motors, or replace the motors & wheels without also doing the cage (if you'll want that). Mounting and unmounting the wheels can wreck them.
/u/outofdarts sells other mod parts specific to your build not linked, if you want to look around. Containment Crew and Foamblast are also good shops, but OOD is also in the PNW so I gotta throw him all the bones.
It's so I can plug in my Lipo. I dremeled out the stock tray to fit the battery (length and width-wise) and will be adding a custom cover to fit it height-wise. This is the battery I'm using.