Best welding protective equipment according to Reddit
Reddit mentions of Neiko 10908A Fiberglass Welding Blanket and Cover, 4' x 6' | Brass Grommets For Easy Hanging and Protection
Sentiment score: 3
Reddit mentions: 8
We found 8 Reddit mentions of Neiko 10908A Fiberglass Welding Blanket and Cover, 4' x 6' | Brass Grommets For Easy Hanging and Protection. Here are the top ones.
- 100% FLAME RETARDANT WELDING BLANKETS: This fireproof blanket is extremely durable and used for general purpose welding to prevent property damages from sparks and flames.
- HEAVY-DUTY FIBERGLASS MATERIAL: The fire blanket retardant fiberglass is 19.8 ounce per square yard that provides excellent thermal fire-resistant protection.
- WEAVING PATTERN DESIGN: These welders blankets have a 30 x 30 per square inch weave design for extreme durability, which stands up to long term repeated use.
- REINFORCED HEM: These fire-retardant tarps have a 3/8” I.D. brass grommet every 11 inches for secure and easy hanging.
- WORKING TEMPERATURE: Each welding blanket can withstand up to 1000°F (537°C) to ensure fireproof protection.
Features:
Specs:
| Color | Clear |
| Height | 1 Inches |
| Length | 12.2 Inches |
| Number of items | 1 |
| Size | 4 Ft. x 6 Ft. |
| Weight | 3.5 Pounds |
| Width | 12 Inches |
▼ More
#1 of 8
This is what I use to help reduce the effect from the elements when it's cold and windy, works pretty alright:
Neiko® 10908A Heavy Duty Fiberglass Welding Blanket and Cover with Brass Grommets Size 4 FT. x 6 FT. https://www.amazon.com/dp/B0057RJD0E/ref=cm_sw_r_cp_apa_aLgmybP3FJ95W
Perhaps if they made walls with large, draped tarps and drop cloths? If the materials were draped loosely, they'd absorb the impact of rubber bullets and tear gas. Better yet, use a fibreglass welding blanket because it'd be difficult to penetrate AND it would be completely fireproof.
I think a better tactic would be to absorb the kinetic energy of rubber bullet and smoke grenade impacts, rather than try to outright stop it with something rigid, as a material that bends will last longer; no issue of fracturing.
I haven't tried it yet myself (far northern NY), but I've been told that draping a WSM with a welding blanket can do wonders for winter temps.
http://www.amazon.com/Neiko-Heavy-Duty-Welding-Blanket/dp/B0057RJD0E/ref=sr_1_1?ie=UTF8&qid=1420249680&sr=8-1&keywords=welding+blanket
I bought a fiberglass welding blanket to insulate my smoke vault as it is getting colder here in central Ohio. I am smoking 5lbs of chicken breasts. I let the temperature stabilize at 271-273, and then put the blanket over it as shown. Now, 12 minutes later, the temp has risen to 298-300.I might sew the blanket into a jacket or just leave it like it is. I'm happy with the $23 I spent oon this.
EDIT 1: It is 50 degrees Fahrenheit here, with a "reelfeel" of 43.
EDIT 2: I think a second blanket, configured the same but draped from the front would be an easy addition for the really cold/windy days.
EDIT 3: I added two more pictures of the discoloration on the blanket from the lower side vents. This was from a two hour smoke at 275 degree Fahrenheit.
https://imgur.com/a/X5R9s62
https://www.amazon.com/gp/product/B0057RJD0E/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Welding Blanket should work just fine. Plywood for a windbreak if you really need the extra help after that.
I have to admit that I've never heard of welding cloth. Would this do the job?
Yessir. I use this one from Amazon. $20.
Careful. They work really really really well. Make sure you don't cover your thermo or you may melt it. Keep your air intakes and exhausts uncovered. Check it frequently or use a thermo with a remote alarm.
Well that answers that. I would suggest using a Welders Blanket instead if you were actually going to attempt this.