Reddit mentions of Wright's Copper and Brass Cream Cleaner - 8 Ounce - Gently Cleans and Removes Tarnish Without Scratching
Sentiment score: 5
Reddit mentions: 8
We found 8 Reddit mentions of Wright's Copper and Brass Cream Cleaner - 8 Ounce - Gently Cleans and Removes Tarnish Without Scratching. Here are the top ones.
Buying options
View on Amazon.comor
Long-Lasting Shine - The finest ingredients keep copper, bronze & brass beautiful for many years to comeEasy - It takes just seconds to effortlessly polish, rinse & dry for a brilliant, mirror-like shineEffective - Helps bring your copper back to its original beauty by erasing the discolorationProtect - Anti-tarnish formula leaves behind a protective coating that delays tarnish from reformingUse On - Tarnished copper mugs, pots, pans, sinks, doorknobs & other copper pieces around your home
Specs:
Color | Multi |
Height | 2.6 Inches |
Length | 3.6 Inches |
Number of items | 1 |
Size | 8 Fl Oz (Pack of 1) |
Weight | 0.15 Pounds |
Width | 3.6 Inches |
https://www.amazon.com/Wrights-Copper-Cream-Cleaning-Polishing/dp/B0083PEZ00 My old man uses this make sure its real copper, but if it's looking like the statue of liberty it probably is.
I would start with this stuff in a small area and see how it works out before you get into any sanding.
If you do have to sand, I would use a non-woven abrasive drum similar to these in the finest grit available. Only go coarser if you have to as you'll be making more work for yourself. I wouldn't sand in circles, straight sanding lines will look better if you cant get them all out. If you don't have a lot of scratches, start with a 220 emery cloth. Then move on to a buffing wheel and compound if needed.
I've used Wright's Copper Cream on heavily tarnished copper bells and it worked pretty well. I used hot water on the metal first, then scrubbed with a sponge, then rinsed. It does take some elbow grease, but if you can warm up the metal it comes off more easily.
https://smile.amazon.com/dp/B0083PEZ00/ref=cm_sw_r_cp_apa_i_h9XUCbY93CZ26
I use this stuff. Works great.
https://www.amazon.co.uk/dp/B0083PEZ00/ref=cm_sw_r_oth_tai_MmPZzbY4QPX37
That's a bronze shell, not a brass shell. Close enough, but Ludwig didn't make non-plated brass shells until recently.
I'd get some Wright's Copper Cream and a microfiber cloth and just take your time and work the shell over. If the tarnishing is really bad, you can get some fine-grade steel wool (hardware stores generally have down to 0000) and use it with the Wright's polish.
I use Wright's Copper Cream to clean my cymbals too, when I feel like doing that. Works better than anything else I've ever seen.
I have a copper sink that looks exactly like that after a couple weeks of use. This stuff is what you need. Makes the sink look brand new and it's super easy to use!
Take one off and polish it. Almost certainly copper plated:
https://www.amazon.com/Wrights-Copper-Brass-Cream-Cleaner/dp/B0083PEZ00
Wright's Copper Cream works wonders. Rub it onto the copper and let it sit for a little while (5 min or so) and then rub it off under running water. I'm not sure this will remove sticky tape residue, but it will give a nice polish, so this could be a final step after following /u/fashionforward's advice.