(Part 2) Best products from r/350z
We found 26 comments on r/350z discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 109 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. OTC 7034 Disc Brake Pad Spreader
- Designed to work on standard and four-piston caliper disc brakes
- Also will help to shorten installation time
Features:
22. Magnaflow 10791 Tru - X Stainless Steel 2.5" Exhaust Pipe
Designed to channel out the emitted gas from the engine of the vehicleMade from stainless steelFeatures a gentle radius which allows a better gas exhaust scavengingOffers increased torque and powerBacked by lifetime warranty
23. SanDisk Cruzer Fit CZ33 32GB USB 2.0 Low-Profile Flash Drive- SDCZ33-032G-B35
- Low-profile drive for notebooks, tablets, TV's and car audio systems
- 32GB of Capacity in a tiny portable USB Drive
- Guard your data with SanDisk Secure Access software
- Built-in LED light to monitor drive's activity
- USB Specification: USB 2.0,Backed by a 2-year limited warranty
Features:
24. Car Rear View Camera & Night Vision HD CCD Waterproof and Shockproof Camera for Nissan 350Z / 370Z / Fairlady Z
- High-definition and 170 degree wide viewing angles
- With good waterproof function.
- Applicable to variety of Vehicles: car, truck, RV, mini-van etc
- Solve the issue of bad car Rear view effect, can help parking and reduce incidents and accident.
- With its elegant and contemporary design, this camera is very popular
Features:
25. Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle
- ✅ THE MOST ADVANCED PAINT PROTECTION FOR YOUR VEHICLE! Adam’s Ceramic Paint Coating is a clear, nanocrystalline coating that protects your vehicle from weather, chemicals, and UV rays while repelling water, dirt and other contaminants. Providing 9H hardness, 5+ years of protection even in the harshest conditions.
- ✅ PATENT PENDING UV TRACING TECHNOLOGY! Infused with patent-pending Ceramic Glow Technology. This feature acts as an application aid allowing users or professionals the ability to never miss a spot and make sure the coating is perfect every time you apply it!
- ✅ ULTRA HIGH GLOSS! The key to the coatings unbeatable “shine” is in the preparation stage. You’ll want to wash, clay, and remove any contaminants from the paint before polishing the paint to perfection. Then using the provided Coating Prep, you can wipe the vehicle down to remove any waxes or sealants left behind! Next, you can apply the ceramic coating using 50/50 overlapping to ensure full coverage.
- ✅ EXTREMELY HYDROPHOBIC! Adam's New Ceramic Paint Coating is a super durable barrier to protect paint from dirt and bonded contaminants, with outstanding water beading that makes water almost jump off the surface! This nano coating is safe on clear coat, single stage, vinyl wraps, and lacquer paint finishes and can minimize the chances of creating swirl marks and scratches while washing and drying.
- ✅ 110% SATISFACTION GUARANTEE! Proudly crafted in the USA, this state of the art nano ceramic car coating kit is specially designed using the most advanced technologies available. We pride ourselves on customer service and satisfaction and believe that this is THE BEST Ceramic Paint Coating on the market! If you don’t agree, we’ll do everything we can to make it right.
Features:
26. Lisle 24680 Spill-Free Funnel
- The new clear funnel allows a quick visual check of the coolant from across the shop. Comes with a lid to keep contaminants out as well as store the caps and adapters.
- The Spill-Free Funnel eliminates trapped air pockets which usually cause erratic cooling system and heater performance.
- It controls the proper amount of coolant entering system and enables unattended filling of the cooling system.
- The funnel eliminates squeaky belts caused by coolant overflow and protect the environment.
- Five adapters fit most domestic and import cars, light trucks and Ford vehicles.
- Straight extension and 45 degree elbows allow use on radiator caps that are placed at an angle or other hard-to-reach applications.
Features:
27. Arkon Car or Truck Seat Rail or Floor Phone Holder Mount for iPhone X 8 7 6S Plus 8 7 6S Retail Black
Mega Grip phone holder’s side grip arms open up to 3.25 inchesApple iPhone X 8 7 6S Plus 8 7 6S compatibleRecommended for fleets and service vehiclesFloor brackets included for screwing the mount into the vehicle floorLifetime limited warranty
28. uxcell 30 Pcs 8mm Hole Retainer Clips- Plastic Drive Rivets Mud Flaps Bumper Fender Push Clips for Nissan
- PERFECT REPLACEMENT FOR OEM- the retainer clips are made of high quality plastic, have a good fit and are of equal quality to the originals
- THE SAME SIZE & SHAPE AS ORIGINAL - Head dia:20mm/0.8inches; stem length:9mm/3.5inches & fits:8mm/0.32inches hole;
- UNIVERSAL FIT- These push-type plastic clips will fit on most of auto parts with 8mm hole, hold your parts very tightly
- WIDELY USE-Apply, plastic panels,wheel liners,bumper frames etc.
- total length: 22mm/0.88 inches
Features:
29. Scosche NN03B Wire Harness to Connect an Aftermarket Stereo Receiver for Select 1995-Up Infiniti/Nissan
- Harness is used when installing an aftermarket stereo
- Select 1995-Up Infiniti/Nissan Vehicles
- Connects the aftermarket stereo harness to the vehicles factory harness
- Made from OEM quality materials
- Standard color coded wires provide a consistent and simplified installation
Features:
30. Original Engine Management 80021 Oil Pressure Switch
- Manufactured to OE specification for fit, form, and function
- Quality construction and materials
- High grade materials are used to ensure peak conductivity and perfect connections and avoid failure of associated core units
- Package Dimensions: 11.112 H x 12.7 L x 11.590 W (centimetres)
Features:
31. 3M 39008 Headlight Lens Restoration System 2-Pack
- 3 step process requires as little as an hour to get rid of scratches and restore dull and cloudy lenses
- Polishing compound to restore hazy and dull headlights
- Restore two headlight lenses
Features:
32. 2003 2004 2005 2006 2007 2008 2009 03 04 05 06 07 08 09 350Z Compatible 350 Z ***UNIQUE BLUE*** 4 BUTTON REMOTE FOB CLICKER KEYLESS ENTRY CASE SHELL & PAD ONLY WITH FREE DISCOUNT KEYLESS GUIDE
33. Metra '06 - up Nissan 350Z Radio Install Kit
- Metra patented Snap In ISO Support System
- Comes with oversized under radio storage pocket
- All necessary hardware included for easy installation
- Includes Double-Din Radio Trim
- Included components: dash kit
- hardware
- manual
Features:
34. Pumpkin 6.95" Android 5.1 Car Radio 2 Din In Dash Auto GPS Nav Head Unit AM FM Radio Stereo Receiver Bluetooth SWC 3G Wifi OBD2 DVR 1080P Mirror Link with Backup Camera
35. SCOSCHE NN1647B Compatible with 2003 to 2005 Nissan 350Z Double DIN Car Stereo Installation Kit
MATCHING DESIGN: Aligns with factory dash to match the aesthetics of your vehicleDOUBLE DIN KIT: Dash kit works with a double DIN aftermarket stereo or CD playerCOMPATIBLE NISSAN VEHICLES: Our car stereo in-dash installation kit is compatible with 2003 to 2005 Nissan 350Z vehiclesBUY WITH CONFIDENCE...
36. Classy Autos Nissan 350Z White Interior LED Package (5 Pieces)
WHITE interior LED Package deal (5 pieces) for 2003-2008 Nissan 350ZMap light (2 pieces)License plate light (2 pieces)Trunk/Cargo area (1 piece) (MADE IN JAPAN CLASSY AUTOS)All LED bulbs are 100% plug and play, with no modification needed.
37. VicTsing Bluetooth FM Transmitter, Wireless In-Car Audio Adapter /w USB Port, Support AUX Input 1.44 Inch Display TF Card Slot - Silver Grey
Wide Compatibility: VicTsing wireless in-car Bluetooth FM Transmitter is well compatible with most devices on the marke that Bluetooth enabled devices such as Samsung, HTC, Blackberry, Sony, Tablet etc.1.44'' Large LCD Backlight Display Screen: 1.44 inches screen provides clear display: song name, i...
38. KLTECH 4Pcs Auto Door Clip Panel Trim Removal Tool Kits for Car Dash Radio Audio Installer Pry Tool
- Unique design allows access under trim to remove piece correctly--at the fastener point
- Versatile tool set that pays for itself with just one use; saves time and frustration
- Professional-grade kit of 4 incredibly useful tools for removing auto body trim and molding
- Easily remove Trim, Molding, Door panels and Dashboards.
- Works on interior and exterior trim, wide edge remover, narrow edge remover, pull-type remover, handle remover and upholstery clip remover
Features:
39. BATIGE Square Single Port USB 3.0 Panel Flush Mount Extension Cable with Buckle for Car Truck Boat Motorcycle Dashboard 3ft
This batige square USB 3.0 panel flush mount cable design for car,boat and motorcycle.Single port USB 3.0 panel cable is made of premium material, it is a nice heavy duty cables. You can use this USB 3.0 dash mount cable as an USB extension for not only a car,boat,motorcycle dashboard, but also a st...
Yep you can do it all in car. Just did it.
Don't even have to remove the core support and bumper. I removed it during reassembly and would HIGHLY recommend pulling the core support and bumper. It's not much more work and it helps a ton.
Engine pull is absolutely not required though.
Pull the two bolts in the oil pan first so you don't forget.
Also this tool is absolutely worth every penny to pry the timing cover apart without damaging it
https://www.amazon.com/OTC-7034-Disc-Brake-Spreader/dp/B0002SQUHW
You can slip that in between the two casting tabs on the engine and it will pop it right off without damaging it or screwing with the seal.
Any questions let me know. Job is quite labor intensive the first time it took me around 50 hours taking my time . But once you do it a few times it can be done in about four hours.
Plan a 3 day weekend at least.
I was actually looking at this very exhaust myself not too long ago. From what I've gathered, the system sounds very raspy and makes the Z sound a bit like a civic a la fart cannon.
However it seems that a popular thing to do with this exhaust is to remove the H pipe and replace it with an aftermarket Xpipe. That seems to clear up almost all of the rasp as well as the drone and leaves you with a pretty good sounding dual exhaust for cheap.
Also something to look out for is that this exhaust may be made out of cheap steel that will not hold up very well overtime.
I definitely love the bluetooth features for music. Driving an '03, of course this wasn't an option but when I replaced the deck with an aftermarket one I absolutely love the option of bluetooth / USB drive / AUX port.
I bought this tiny flash drive that's smaller than my thumb nail and play off that primarily.
Now that I'm using my Z has a daily driver, I decided to upgrade it a little. It's an 07 base, so it didn't come with much. Starting with the interior I switched out the head-unit with this Pioneer 4200-NEX that supports both Bluetooth and Apple Carplay / Android Auto for navigation etc. I also wired up a backup camera as I liked the feature on a different car I own and the Pioneer unit supported it. Finally, I switched out the shift knob with a Nismo carbon-fiber one. It feels a lot better than the stock knob! I'm currently working on daylight-running lights in place of the reflectors at the front and an AEM intake.
Backup Camera: Car Rear View Camera & Night Vision HD CCD Waterproof and Shockproof Camera for Nissan 350Z / 370Z / Fairlady Z https://www.amazon.com/dp/B06XQ1VBSL?ref=yo_pop_ma_swf
Trim: SCOSCHE NN1456B 2006-Up Nissan 350z Double DIN or DIN w/pocket Install Dash Kit https://www.amazon.com/dp/B000NWEJVQ/ref=cm_sw_r_cp_apip_xdjJfxrmXZ48i
Camera Installed Photos: https://imgur.com/a/MbmEL
Definitely! There are DIY threads all over the place. There are kits on Amazon that are decently priced.
Edit: Forgot to mention Adams ceramic coating on Amazon is pretty decently priced and the outcome is fantastic!
Link:https://www.amazon.com/dp/B01NA7LKEO/ref=cm_sw_r_cp_apa_i_SuDsDb6YBTJ7Q
The easiest way is to just break down and pay for a Lisle funnel. They make the whole process incredibly easy and they're worth every penny. I spent a day or two dicking around with bubbles and squeezing and revving and all that and THEN bought the damn funnel. Or ask if a friend has one. It took 20 minutes to do and the system has been great for a few months now.
uxcell 30 Pcs 8mm Hole Black Plastic Rivet Fastener Bumper Clip https://www.amazon.com/dp/B00MJU673S/ref=cm_sw_r_cp_apap_CFm1UTXvcFX9y
These are the ones I bought and used. Worked like a charm and great quality. They will work on the bumper cover, wheel well inserts and under hood trim.
No offence but if you don't understand the wiring diagram maybe you should get someone to do it for you?
If you're determined to do it yourself maybe you just need a wiring harness kit like this:
https://www.amazon.com/Scosche-NN03B-Harness-1995-07-Standard/dp/B0007KPS0A/ref=sr_1_2?ie=UTF8&qid=1494895498&sr=8-2&keywords=nissan+350z+wiring+harness
It all depends on your setup. I don't know what plugs Joying comes with and whether or not you have a bose system in your car etc.
ya pretty common problem. it failed on me twice already. you can replace the sensor, its very easy it just unscrews from the oil pan (might as well change the oil sense you will have to drain some of it once the sensor comes out).
easy to get to from under the car. just be easy screwing it back in, dont wanna strip the threads by over tightening. i purchased mine on amazon. hope this helps
http://www.amazon.com/gp/product/B00JLJI648/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
This polishing kit is what I used.
I am very skeptical of how long it will actually last but they definitely made them look better, not like new but much more clean.
Links:
Notes:
The Z keychain isn't sharp (corners) at all; I don't even notice it in my pocket.
The red remote is just a plastic shell and rubber buttons. You need to either take the circuit board and battery out of a current key fob, which is extremely easy, or order an extra remote (3rd link) to use the internals from it. Reprogramming a new keyless remote is even easier than swapping the "guts" out, and it comes with instructions. A quick Google search will also reveal said instructions.
Even though the extra remote says "2003-2006," it will work with 2007. In my case, the car only came with one remote. This was a pretty cheap (and unique) option for an extra. It works perfectly, just like the original key fob.
Look around on Amazon for extra colors. I have seen blue and red, but not sure about white or any others.
It was extremely easy. I used this wiring diagram: http://s222.photobucket.com/user/HOTTTiEBOi7/media/g35_pacoem2_to_jvs_kw-avx820_zps17433e60.jpg.html
I had to splice some wires, but everything was plug and play from there. I wouldn't recommend the headunit/adapter combo I got because I had to sand down the adapter a bit to fit it over the head unit.
I have an 08 so when I bought this I didn't quite read to see that it clearly says the years its recommended for but there's pictures of success in the comments
https://www.amazon.com/gp/product/B001EBRXTK/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Classy Autos Nissan 350Z White... https://www.amazon.com/dp/B005FUU7EY?ref=ppx_pop_mob_ap_share. I bought these and they work great took less then 5 min to install
For the radio, one option is a Bluetooth FM transmitter that plugs into the cigarette lighter. You can pair your phone with it via Bluetooth or it also supports an aux cable connection if needed. Also has a usb port to charge your phone. I got this one for $16, but there are lots of similar options out there. Congrats on the new ride!
https://www.amazon.com/dp/B01DDPUQTS?ref=yo_pop_ma_swf
I bought a cheap automotive pry tool set from Amazon for a couple of bucks. These are the ones I purchased: https://www.amazon.com/gp/product/B00HNMLQAG/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
To take the driver's side panel off, I shimmied one pry tool at each end of the panel that runs perpendicular to the door, and they popped out. After that, you need to pull the window switches out. I couldn't get the clips with my fingers, so I popped them out with a pry tool.
The passenger is a little easier IMO. You need to pry out the aluminum finisher on the door handle first, then there's two 10mm bolts that you need to unbolt, then the door handle will come out. After that, you should be able to get the passenger switch cover by hand. The clips to get the switches out are the same.
After I dipped mine and put them back in the car, I found a good tutorial on it (figures, lol) by someone on Youtube named AnthonyJ350. I painted mine a fair bit differently, but dissablemly is mostly the same.
https://www.youtube.com/watch?v=6vopxhHPTGA
He also has a lot of other tutorials for our cars, so he might have a video on the center console. I've put in and taken out an aftermarket head unit in mine so I've done it, but I can't remember exactly what's in there.
OK, as long as there really isn't a power decrease while driving I am fine with it. It looks/sounds cool (and I kept the stock intake just in case).
Before I add the next mod, is this a good idea: http://www.amazon.com/Motordyne-Plenum-Spacer-Basic-350Z/dp/B0040TCMU8/ref=sr_1_2?ie=UTF8&qid=1405050365&sr=8-2&keywords=jwt+pop+charger
I've recorded and taken pictures of everything I could to make a video of how to upgrade the head unit and install a backup camera in a roadster while keeping the Bose Amps and Speakers. It will include how to install this port. But basically all it is is this cable connected to my Pioneer head unit and run through the center console. I just popped the blank out, measured the cable end and dremeled out the hole to fit. Then cable popped in and I hooked it to the radio.
https://www.amazon.com/gp/product/B078LRSZDB
Video of the whole process will be here when it is done. https://www.youtube.com/channel/UCOtOH3yThzz-1VJWHhIH50g
Sorry about the delay guys, busy weekend :-P
It attaches to the passenger seat bolt on the floor, it basically works on any car. I had the same system on my last 3 cars, I will never look at any other solution. They have different lengths. I think mine is this one
are these what your looking for
uxcell 30 Pcs 8mm Hole Black Plastic Rivet Fastener Bumper Clip
https://www.amazon.com/dp/B00MJU673S/ref=cm_sw_r_cp_apap_CFm1UTXvcFX9y
https://www.amazon.com/gp/product/B00JLJI648/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Used to have one, although I prefer the iOttie One Touch now.
Link: https://www.amazon.com/Arkon-Phone-Floor-iPhone-Retail/dp/B004M8ST3Q
Uses the seat rail bolt.