(Part 2) Best products from r/AR10

We found 21 comments on r/AR10 discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 59 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.

Top comments mentioning products on r/AR10:

u/gwhunter280 · 2 pointsr/AR10

If you want quality, get an American Defense, Larue, or a Bobro. I have a couple of the AD mounts and love them.

u/UDPGuy · 2 pointsr/AR10

Yes I got this one because it has quick release and is a lot more adjustable. This one was quite a bit more, so it really just depends on your taste really. Either way I recommend one with a quick release if you don't want it on all the time

u/Crashes556 · 1 pointr/AR10

Depending on your budget I do like the vortex strike eagle or the primary arms FFP 4x14x44 . Either scope will be perfect for 556/308

Primary Arms 4-14X Tactical Scope with Front Focal Plane PA4-14XFFP https://www.amazon.com/dp/B00L5IL5X2/ref=cm_sw_r_cp_apa_-Itazb1FKKZ55

Vortex Optics Strike Eagle 1-6 x 24 AR-BDC Reticle https://www.amazon.com/dp/B00S2P2KKS/ref=cm_sw_r_cp_apa_IKtazbDKD5V12

You will need a pepr style mount in 30mm for either of these.

Here is the 4x14 on my 308

AR10 https://imgur.com/a/euDyO

u/k31advice96 · 1 pointr/AR10

https://www.amazon.com/Athlon-215028-Talos-Direct-Riflescope/dp/B01APT0G0E

Athlon Talos BTR 4-14x44mm.

Maybe too much zoom? Maybe too thin and complicated for hunting? But an excellent optic.

u/Flaccidacid987 · 1 pointr/AR10

Based on everything you said here, this covers most of it. An easy reticle for ranging and calculating drop. low enough power for close shooting and you can still mount a RMR on top. I had one on my SBR and just got rid of it for a no magnification because the eye relief isn't enough on my SBR.

I will be getting one for my AR10.

http://www.amazon.com/Vortex-Optics-SPR-1303-Spitfire-EBR-556B/dp/B00HYRGNLM

u/Ryan_Extra · 1 pointr/AR10

Burris 300178 AR Prism Sight Ballistic Cq Reticle with Free Fastfire III Reflex Red Dot Sight, AR-536, 5x36mm, 3 MOA with Picatinny Mount, Matte Black https://www.amazon.com/dp/B079562SJK/ref=cm_sw_r_cp_api_i_t.b0DbJ82SG6G

u/KingOG · 2 pointsr/AR10

I got a tekton one for about $40 on Amazon, it doesn't have to be high dollar as the torque range is huge. I built my dad's without one and just went to the next gas tube spot past "tight" never had any issues and that thing shoots. That method wouldn't work so well for the aero Handguards that have 4 spots for the gas tube and a set of shims though so I got one for a friend's build.

TEKTON 24335 1/2-Inch Drive Click Torque Wrench (10-150 ft.-lb./13.6-203.5 Nm)
https://www.amazon.com/dp/B00C5ZL0RU/ref=cm_sw_r_cp_apa_LNTWAbP1FXQPT

u/EasyP · 2 pointsr/AR10

You need something like this: https://www.amazon.com/dp/B00NTZ5738

Attach the M-Lok Pic rail to the bottom of your handguard, attach the bipod to the Pic rail.

u/OfficerPewPew · 1 pointr/AR10

I just bought that same exact scope for my AR10 (is yours the SFP scope?).

I havent gotten a chance to take it to a longer range yet. Have you? How do you like it? It's my first real "tactical" long range scope. ALl my others are 1-x CQB scopes, red dots, and a cheapo 3-9 for my 10/22.

edit: I'm also mad I couldnt find 308 carbine buffer sets anywhere or I would have gotten that stock as well. The MBA-1 doesnt have the rail for the monopod :(

edit 2: Apparently I can add a rail. Yay me!

u/Melbeachmoose20 · 5 pointsr/AR10

I would go with something designed for the AR platform that gets the scope out a bit farther so you can charge the rifle easily.

Like so

u/BadderBanana · 2 pointsr/AR10

Nikon M308 has BDC which might be sketchy for long range precision but is adequate for hunting. I've shot 10" steel at 300 yards with it, and the BDC runs a little high.

https://www.amazon.com/Nikon-M-308-4-16x42mm-Riflescope-Reticle/dp/B00M85OUCY

u/OJ241 · 1 pointr/AR10

Yeah I got you.

XAegis 2 in 1 Bipod 6 Inch to 9 Inch Adjustable Height Rail Mount Adapter Included (Black bipod with Keymod Adapter) https://www.amazon.com/dp/B07JB614QS/ref=cm_sw_r_cp_api_i_Ne.QCbPVQ0M31

XOPin Rifle Scope Combo C4-16x50EG Dual Illuminated with Green Laser Sight 4 Holographic Reticle Red/Green Dot for Weaver/Rail Mount (Updated Laser+104 Red Dot) https://www.amazon.com/dp/B07KTBHXW1/ref=cm_sw_r_cp_api_i_bg.QCbP0R85D7

u/Vol_fan · 2 pointsr/AR10

These work. I have used them in 3 M4E1 builds and one M5 build. And like the other guy posted the place for the set screw is not the same as an ar15. https://www.amazon.com/gp/product/B0006O72M4/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

u/19Kilo · 1 pointr/AR10

Harbor Freight many not have it. When I ran into this a couple weeks ago, mine didn't have the 1 3/8 inch (1/2 inch drive) in their sets.

This one from Amazon will work if you haven't found one yet.

u/10-15AR · 1 pointr/AR10

https://www.amazon.com/gp/aw/d/B003KP4WGU#Ask

I think that's it but can be sure..its been over a year since I got it. It did have 2 screws that were loose when I got it but I put a drop a drop of loctite and its performance has been perfect even under some really heavy recoil rifles