Best products from r/AutoPaint
We found 15 comments on r/AutoPaint discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 14 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Rust Oleum 280704 American Accents Ultra Cover 2X Spray Paint, Gray Primer, 12-Ounce
- Ideal for interior/exterior use on virtually any surface including wood, plastic, metal, wicker, plaster, unglazed ceramic and more
- Provides long lasting protection with any-angle spray comfort tip that reduces finger fatigue and makes it easy to reach hard to paint places
- Dries to the touch in 20 min and covers up to 12 sq ft for quick project completion
- Superior durability with smooth, full coverage and vivid color
- Gray primer provides a surface ready for painting
Features:
2. 3M Versaflo Heavy Industry PAPR Kit TR-300-HIK"
Versaflo heavy industry PAPR kit. The battery life is 10 - 12 hoursReady to use HE PAPR system for industrial applicationsHeadgear type: hard hat | Operation type: facility safety, maintenance, repair and operations and overhaulSuggested industries include automotive, food and beverage manufactur...
3. 3M Ultimate FX Full Facepiece Reusable Respirator FF-402, Mold, Painting, Sanding, Chemicals, Gases, Dust, Medium
SECURE FIT: Durable, long lasting head harness features a 6 strap configuration for a secure fit; Comfort cradle positions the respirator more comfortably on the headCOOL COMFORT: 3M Cool Flow Valve helps provide cool, dry comfortSOFT SILICONE NOSE CUP AND FACE SEAL: Silicone full face piece design ...
6. Automotive Body Repair & Painting Haynes TECHBOOK
- affordable proucdts
Features:
7. Advanced Custom Painting Techniques
- detailed step by step color photos
Features:
8. How to Paint Your Car on a Budget (Cartech)
- automotive-diagnostic-tools
Features:
9. 3M Accuspray ONE Spray Gun System with Standard PPS, 16580
- ONE GUN FOR ALL PAINT SPRAY NEEDS – 3M Accuspray original handheld HVLP paint gun works with original PPS or PPS 2.0 disposable lids, liners and nozzles to measure, mix, filter and spray a variety of paint materials
- ALL-INCLUSIVE PAINT SPRAY KIT – Includes 1 Accuspray spray gun, 4 nozzles (1.2 mm, 1.3 mm, 1.4 mm, 1.8 mm), 1 plastic paint cup, 1 collar, 5 disposable lids (4 with 200-micron filter, 1 with 125-micron filter), 5 disposable liners, universal mix ratio insert and sealing plugs. Air compressor and hose coupler not included
- PICK YOUR PROJECT – Comes with 22-ounce standard-size cup, ideal for any painting project including cars, boats, furniture, equipment, cabinets, arts and crafts
- VARIETY OF MATERIALS – The different nozzle options allow you to spray paints, stains, varnishes, basecoats, undercoats, primers, sealers, clearcoats, gelcoats, sprayable adhesives and more
- LIKE-NEW PERFORMANCE AGAIN AND AGAIN – With replaceable atomizing heads, you get the performance of a brand-new gun each time you replace the nozzle
- 360 DEGREE PAINT RANGE – When used with included PPS cup system, you can consistently spray at any angle, even upside down
- LESS WASTE, MORE EFFICIENCY – Less paint waste, mess and contamination than traditional methods. Use up to 70% less cleaning solvent, and shorten prep and cleanup time by as much as 50% compared with conventional metal paint cup systems
- For industrial/occupational use only. Not for consumer sale or use.
Features:
10. 3M Accuspray Spray Gun Kit HGP, 16587, 1 per case
3M Marine 16587, MMM16587.Pressure Cup not inluded, sold separately.
11. Rust-Oleum 7701830 Stops Rust Spray Paint, 12-Ounce, Gloss Crystal Clear
- Weather and corrosion resistant coating protects exterior/interior surfaces like wood, metal, concrete, masonry and more
- Oil-based formula provides a durable protective coating with excellent rust prevention
- Dries to touch in 2 to 4 hours and covers up to 15 sq ft
- Excellent resistance to abrasion, fading and chipping
- Glossy finish provides a fresh shine to surfaces
Features:
12. Graco-Sharpe 288879 HVLP FX3000 Paint Spray Gun, 1.3 mm
1.3 mm HVLP Gravity Feed Spray GunLightweight and compactIncludes FX3000 gun, 600cc aluminum cup, wrench and cleaning brush
13. TCP Global Brand HVLP Spray Gun Set - 3 Sprayguns with Cups, Air Regulator & Maintenance Kit for All Auto Paint, Primer, Topcoat & Touch-Up, One Year Warranty
Spray the Full Spectrum of Coatings Using this Quality 3 Gun Set of High Performance HVLP Spray Guns. You Get All the Premium Features and Benefits, without the Premium PriceSpray Base-coats, Clear-coats, Single Stages, Primers and More. Guns Provide Fully Atomized Spray Patterns, So You Can Achieve...
14. SPRAYIT SP-33000K LVLP Gravity Feed Spray Gun Kit
One-piece lightweight aluminum gun body with 20 oz./0.6 l plastic cupSeparate and Adjustable fluid, fan pattern and air controls for precise applicationAir consumption 3.5 to 3.9 CFM @ 30 PSIWorking pressure 28-45 PSI. Maximum pressure 60 PSIFan Pattern: 7.0'' to 10.9''
Wash everything down with soapy water first (even if it's new and doesn't look dirty). I'd replace the adhesion promoter with a good plastic compatible primer, I've had a few issues with Krylon primers and plastic, but this stuff worked great for me. Also, make sure you know what grits to reach for during the sanding process. You'll want to sand the primer at about 400-600, base coat 800-1000, clear coat 1000-2500. With dry times, make sure you know the paint's recoat window. Also, before sanding, make sure the paint is hard or it will gum up the sand paper and tear it off the surface you're painting.
Also, after clear coat you'll want to sand again, you will need some rubbing compound and polish for this step as well since sandpaper is too coarse to get the shine back.
I'd recommend a fresh air respirator hood if you have a large beard. If it's just some scruff their full face respirators work just fine when adjusted and fit tested.
Fresh Air Respirator Hood System:
3M Versaflo Heavy Industry PAPR Kit TR-300-HIK" https://www.amazon.com/dp/B007PB4C38/ref=cm_sw_r_cp_apa_i_wlMTCbTFT2AXJ
3M Full Face Respirator:
3M Ultimate FX Full Facepiece Reusable Respirator FF-402/89421, Respiratory Protection, Medium https://www.amazon.com/dp/B009POIVWG/ref=cm_sw_r_cp_apa_i_KnMTCbM80ZYXX
I'm not sure what 2 pack is but 2k means 2 component. The primer and the hardener. Same thing with paint. If the paint/clear is in good shape then you can scuff and respray.
Check out SWRNC on YouTube. He's a good resource, he also has a channel called diyautoachool.
Also check out the refinish network and collision hub.
I also bought a few books off Amazon on how to repaint your car. I'll go track them down and post some links for you
How to Paint Your Car on a Budget (Cartech) https://www.amazon.com/dp/1932494227/ref=cm_sw_r_cp_apa_R68wzbHG79CEQ
How to Paint Your Car (Motorbooks Workshop) https://www.amazon.com/dp/0760315833/ref=cm_sw_r_cp_apa_678wzbRQSC94Z
The Haynes Automotive Body Repair & Painting Manual https://www.amazon.com/dp/1850104794/ref=cm_sw_r_cp_apa_M98wzbRDWH7D4
Advanced Custom Painting Techniques https://www.amazon.com/dp/1929133146/ref=cm_sw_r_cp_apa_t-8wzbD3QD1JW
Pro Paint & Body HP1563 https://www.amazon.com/dp/155788563X/ref=cm_sw_r_cp_apa_S-8wzb8BRY3TQ
3M Has a great disposable gun with multiple tip sizes.. you’ll need to buy their liner system as well.. Harbor freight has some decent inexpensive guns.. But if cost is not a factor Sata is always a good choice .. https://www.amazon.com/3M-16580-Accuspray-System-Standard/dp/B01497MZB6
Try something with a plastic air cap. Much more beginner friendly and cheaper to replace. One I started with was this or something very similar Accuspray 3M (16587) Spray Gun Kit https://www.amazon.com/dp/B00AJVE1ZU/ref=cm_sw_r_cp_api_i_e-mlDb6EFSAMK
I used this Rust-Oleum Clear Coat . I know it's cheap but this paint has been drying a long time.
Thinking about getting the Graco-Sharpe Fx3000 https://www.amazon.com/gp/product/B001A4FKTG/ref=ox_sc_act_title_5?smid=ATVPDKIKX0DER&psc=1#customerReviews
heh, I just found this entire sub by accident while looking to see if there are any subs about painting as I'm also getting into it for some of the same reasons, but I'm a few steps ahead of you. So let me share what I've learned.
HVLP guns will most likely not get enough CFM from your compressor, that said there are now LVLP guns that you can get which take less air, they also put down a bit less paint, but you should be able to get away with your 8 gallon depending on cfm. I've got a 26 gallon that puts out something like 5-6 cfm around 40 psi, and the LVLP gun that I got I'm shooting 25-30 psi . The gun itself should only consume around 3.5-4ish cfm so I should theoretically be able to shoot continuously. The tank size just determines how long you can go without the pump coming on, its the deliverable cfm that matter the most, if your pump can outpace the guns usage you're good, if not you will be constantly stopping to let it catch up.
this gun
I got a sprayit sp33000 kit, which comes with one gun, a 1.3/1.5/1.7 tip. I've only shot 2 coats of primer so far, and I had problems with the paint having tiny bubbles and a small fan size even with the fan all the way open, I think I've resolved the fan size problem with an extra 5 psi, was shooting 20psi before; just realized its supposed to be 28 psi minimum. The gun comes with a pressure regulator that works quite well, so you could run it direct from your tank without a pressure regulator on the tank. Word of warning, if you have a small pressure regulator, TAKE IT OUT OF YOUR SYSTEM! I had a small little one that couldn't flow enough air through it and it was wrecking havok on my ability to use any air tools, it will also kill the consistency of air flow to your paint gun. Also, you will need a water trap to get moisture out of the air, get one that attaches to your gun, or goes tank side, but don't think you can get away without one.
As to paint, for my situation I'm just using tremclad aka rustoleum in 'merica. For the purpose of spraying if you decide to go with an older oil based enamel, you will need to thin with paint thinner / mineral spirits / or acetone, the hotness of those three solvents are listed in order ( how quick it will dry ). Also you will need to find some enamel hardener, well not need, but if you just shoot the paint straight it will take 24 hours to cure, with hardener a coat of paint can dry to the touch in 1-2 hours and the finished paint will dry tougher and harder.
Most recommended hardener for rustoleum online is valspar enamel hardener
I chose to go with rustoleum because it's cheap, the thinners / solvents are cheap, and it should be a good learning material. There are also lots of people out there getting good results with it, so it's not like you will be dead in the water unless you spend a boatload on more expensive paints. Also worth mentioning whatever you do get a good paint respirator, especially with the expensive paints as some of them have some cyanide in them!
Lastly is your paint a straight color or metalic? If you want to replicate metalic you need to paint a base color, then mix the metalic flakes ( you can buy them on amazon ) into clearcoat and shoot some layers of clear coat over the paint. Rustoleum also has a gloss clear coat paint you can use for that.