(Part 2) Best products from r/CafeRacers
We found 24 comments on r/CafeRacers discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 82 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. HANSWD Fork Clip-ons Handle Bars CNC Riser Regular Handlebar for 1969-1982 Honda Suzuki Yamaha (33mm)
- CNC Machined high quality.
- Ergonomic design reduces driving fatigue and discomfort
- Angled 10 degrees down for optimal riding position,enhance better motorcycle control
- Easy to install. Direct bolt-on your mounting point.
- Please ensure this part fits for your motocycle before bidding.
Features:
22. BikeMaster Folding Bar End Mirror FHM005F-K
- Bar end mirros with a difference
- Beautifully case mirror backing plate and arm are one-piece, eliminating screws and mirrors vibrating loose
- Nylon swivel allowing just the right amount of tension to be maintained for easy adjustment
- Not only do they have the usual adjustments, but they have a patented featue that allows them to quickly be folded in, reducing the width of the bike, and makin them less conspicuous
Features:
23. QAZAKY Replacement for Control Turn Signal Horn Light Low High Beam Left Switch Dirt Bike ATV Suzuki Yamaha Kawasaki KTM Kymco Polaris Universal 520 450 530 500 wr wrf xr 600 650 7/8" Handlebars
- ✪ Original high quality brand new ”QAZAKY” parts, 100% tested before sending out.
- ✪ Fits universal switch for 7/8inch diameter handlebars. Built in turn signal switch, horns switch and hi/lo beam switch.
- ✪ Fits most motorcycle, motorbike, ATV, quad, scooter, go kart, moped, chopper, pit bike, dirt bike, racing bike, mini bike and other bike.
- ✪ Compatible with Suzuki, Yamaha, Kawasaki, Ducati, Aprilia, Vespa, Kymco, Piaggio, Agusta, Banshee, Polaris with 7/8 inch handlebars.
- ✪ All of the original “QAZAKY” parts are backed by 180 days’ carefree return, BUY WITH CONFIDENCE!
Features:
24. Innovate Motorsports (3844) MTX-L Wideband Air/Fuel Ratio Gauge Kit, Bosch LSU 4.9 - includes LSU 4.9 Sensor
Patented DirectDigital wideband sensor control, 100% digital wideband air/fuel ratio technology!52mm (2 1/6”) diameter gauge bodyDigital display in AFR or LambdaBosch LSU4.9 Wideband O2 Sensor is compatible with all fuel types (Leaded, Unleaded, Diesel, Methanol, E85, etc)Ability to calibrate O2 s...
25. PEDA Cafe Racer Seat Frame Hoop Loop w/ LED Light Lamp Upswept Kick Up Brat Style Bent Steel Iron For HONDA CG YAMAHA SUZUKI
- Condition: PEDA MOTOR Brand Italy, New and High Quality Motorcycle Accessory.
- Material: Bare Steel Finishing Iron (NOT PAINTED! )
- Dimension: L x W = 21cm(8.26") x 22.5cm(8.85")
- Features: 3 in one LED! Custom Made Seat Frame Hoop/Loop with Led Light,Turn Signal Light (Indicator winker), Brake Light (lamp). LED is In Tube Inside, NOT Glued by Sticker.
- Attention: Universal Parts But Modification May be Required to Mount. Pls Check Photo and Dimension Before Ordering.
Features:
26. SpeedMotoCo Black LED Headlight Motorcycle Streetfighter Cafe Racer Stock
- All steel bucket cafe racer motorcycle headlight LED black
- Low Beam
- High Beam
- Park / Side Light
- 6.5" wide
Features:
27. Uni Pk-92 High Flow Pod Filter Kit 2-1/4"
Straight/Black foam elementDeluxe urethane end capCompletely washableRubber base for perfect fitLooks like new after every cleaning
28. Wecade 7" Round Daymaker LED Projectior Headlight for Jeep Wrangler Motorcycle (7" Inch Black with Halo)
- Various- American Epic: Best Of Country
Features:
29. Rust-Oleum 248944 Automotive Rust Preventive Engine Enamel Spray Paint, 11 Oz Aerosol Can, Clear
Durable, long-lasting finishResists Oil, gas, grease, rust, salt, humidity and solventsAvailable in industry standard colorsModel number: 248944
30. Battery for WP3-12 Backup 12 Volt 3.5AH 12v 3.5 Amp-hr
Chrome Battery 12V 3.5AH - 42 Watts - T1 terminals - 2.98 lbs(H)2.38" x (L)5.28" x (W)2.64" Polarity: [- +], Maintenance Free and Fully ChargedSealed Lead Acid and AGM Design Prevents Leaks and CorrosionUnmatched 60 Day Money Back Guarantee with an Exceptional 18 Month WarrantyFree Shipping 1-3 days...
31. INNOGLOW Motorcycle Turn Signal Lights Bulb Amber Universal Incandescent Lens Indicators Blinkers Lights for Custom Honda Suzuki Yamaha Kawasaki Harley Davidson Choppers Cruisers (2 PCS)
- Multifunction:Can be used as front/rear turn signal or daytime running light
- High Quality:Solid black steel construction, smoke lens,durable
- High Performance:2-wire connection,faster on/off response time
- Package Included:1x pair of bullet motorcycle turn signals;instruction manual is not included
- Note:Please check the detail information and size carefully before your purchasing
Features:
32. USC Spraymax Matte Clearcoat 3680065
- Designed with a low gloss sheen
- Flat clear coat
- Works great over most all types of paints
Features:
33. BikeMaster Daytona Bend Handlebars - Black
Color: BlackSize: One SizeBikeMaster Daytona Bend Handlebars for AdultsBikeMaster Daytona HandlebarsBikeMaster Daytona Bend Handlebars
34. AstroAI Digital Multimeter with Ohm Volt Amp and Diode Voltage Tester Meter (Dual Fused for Anti-Burn)
- VERSATILE DIGITAL MULTIMETER - Accurately measures AC/DC Voltage, DC Current, Resistance, and Diode. This Multimeter is a really useful tool for solving industrial and household electrical issues. Suitable for Household Outlets, Fuses, Batteries (including Vehicles), Automotive Circuit Troubleshooting, Charging System, Testing electronics in Cars etc.
- TROUBLESHOOTING WITH Accuracy - This Multimeter has a sampling speed of 2 times per second; Built-in a backlight LCD display with 3 ½ digits (1999 count) 0.6”, and high polarity including negative and positive readings.
- ENSURES SAFETY - Double ceramic fuse is anti-burn and protects from overloading.The silicone cover is able to protect the multimeter from failing damage and prevent electric shocks. And low battery indication will be displayed when battery power is low.
- EASE OF USE - Support Data Hold, low battery indicator and continuity buzzer. Includes Convenient feature like LCD Backlit Screen makes it easy to use in dimly light areas. Battery / Set of Test Leads / User Manual/ are Included.
- ADDITIONAL TIPS - This Multimeter is designed to troubleshoot a variety of automotive and household electrical problems safely and accurately. It’s a suitable tool if you want to do some household or commercial improvements whether DIYers or Hobbyists. (NOTE: This meter can not test AC Current; Ensure your multimeter is set to the correct setting before testing)
Features:
35. Biker's Choice Mini Tachometer
- At Biker's Choice, they know quality, value and performance when they see it.
- It's not only their passion but their personal promise to provide their customers only the best products the world has to offer.
- They know their products like they know each other, because they ride what they sell.
- The heart of Biker's Choice - the entire company - is filled with riding enthusiasts just like you; people who have a passion for what they do, the industry they're in, and the product they sell.8,000 RPM tachometer.Wiring instructions included.12-volt, l
Features:
36. SAMDO Universal GPS Speedometer Boat Gauge With Odometer 85mm 160MPH , ATV Motorcycle Marine GPS Speedometer
- Universal GPS Speedometer for all car, motorcycle ,boats,and off-road vehicles
- SAMDO Marine Speedometer Characteristic : IP67 waterproof , Rainproof, Dust proof , Anti fogging,Indicating Range: 0-250 Km/h; 0-160MPH
- SAMDO GPS Boat Speedometer Less power consumption, longer life, higher precision,quick location confirmation, short start up time
- SAMDO Marine GPS Speedometer Read from Zero, the mileage is not re-settable, it is like on a car and just keeps adding miles
- The signal comes directly from the satellite signal receiver ( GPS Speed Sensor), It has power off memory function. Odometer still keep on recording without power.
Features:
37. Tune to Win: The art and science of race car development and tuning
- Tuning of race car
- Tune to win
- Vehicle Dynamics
Features:
38. Carroll Smith's Nuts, Bolts, Fasteners and Plumbing Handbook (Motorbooks Workshop)
Used Book in Good Condition
39. Prepare to Win: The Nuts and Bolts Guide to Professional Race Car Preparation
Prepare to WinCarroll Smith
40. SKTYANTS 7" 7 Inch Headlights Housing Bucket with 7 inch Headlight (White DRL Amber Signal Light) for Harley Motorcycle (Black)
7" Round LED Headlight, High Performance High-Low Beam, DRL is white;Turn signal is AmberSuperior Light Output but Soft Light, Efficiently Relieve Driving FatigueAE / DOT Compliance assures accurate beam pattern distribution & precise fitment .Fits FXWG, FXDWG, and FXST models with 7" LED Headlight ...
The good news is you have awesome carbs.
If you have the scratch, you might consider one of these:
http://www.amazon.com/gp/product/B004MDT8MW/ref=s9_simh_gw_p263_d5_i1?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-7&pf_rd_r=1CHWYHHQHCSMFYQCT780&pf_rd_t=101&pf_rd_p=1688200482&pf_rd_i=507846
That is the absolute ultimate carb-tuning tool. It tells you absolutely whether you're rich or lean. You want an air/fuel ratio of 14.7:1 most of the time as 12.8:1 balls-out-wide-open. As you make mods to the pipe, carbs and/or air cleaner this will tell you exactly what's up. Even once you have everything straight you can leave it on as a diagnostics tool, or pull it and plug the sensor bung location with a screw.
We're not seeing this tech on bikes yet but...makes a ton of sense to me. I've wrestled with carb tuning for years and can't wait to build a bike with this baby.
Removed the original headlight mounts
Sanded down all the rust under the headlight mounts
Removed aftermarket drag bars
Installed clip-ons
Installed new levers
Bought custom length brake cable and banjo bolts (bought locally, no link)
Mounted headlight on new brackets
Made custom bracket for speedometer out of metal bought from Lowes
Bar end mirrors
Grips
Horn+turn signal+headlight switch
For some reason I can't remember where I got my throttle. It's kinda Gerry rigged together. So buy something you're comfortable with.
Edit: Feel free to contact me for details on the changes I've made. I'd be glad to share details where needed.
Thank you!!! Down the road I want to put the light actually inside the hoop. Kind of like this: https://www.amazon.com/PEDA-Racer-Upswept-YAMAHA-SUZUKI/dp/B075LPHNQV
It's actually an entire assembly with space to tuck wires in it. I haven't had a chance to test it at night but the lights seems like they have good output. Here's where I bought it: https://www.amazon.com/dp/B00IEC8TJU/ref=cm_sw_r_cp_apa_UDDvxbPTM6ZJS
I've had good experience with Uni pods. Dip them in a bit of oil before installing and it'll give you a more favorable flow resistance. http://www.amazon.com/Uni-Pod-Filter-Kit-Chrome/dp/B000GZMZKC/ref=sr_1_10?s=automotive&ie=UTF8&qid=1417452486&sr=1-10&keywords=uni+filter
How old is your CX? If it was from 1979, you should be able to not MOT it anymore... Also, it looks like HIDs are an instant fail, but there's no mention of LEDs, so as long as you can aim your lamp right it should be ok.
I've had one of these for the last 2 years which has a DOT marking and it never has a problem with inspection, but I'm in NY, although a fella by the name of Motobob on youtube/instagram has a really similar one on his Triumph and he's London based, so there may be a version that has the right pattern for RHD (yeah I realize that's a bit of a misnomer) bike.
/u/BASE1530 nailed it. If you're looking for a chrome finish from a plain steel tank you're going to have a bad time. If it were that easy everyone would be doing it and as you've found, they are not. If the question is just the gas resistant clear coat that one is easily solved with a can of this.
Zip-tied under the seat :) Told you it's a work-in-progress.
I'm using something like this.
Here are the turn signals!
https://www.amazon.com/dp/B01LXI8YW4/ref=cm_sw_r_cp_apa_i_fofsDb75J33GN
The stoplight is actually a super cheap generic one that my buddies and I fabricated a bracket for!
This is matte automotive clear coat- Amazon. It's the only matte 2k clear coat I've found
I have something similar...they're Bikemaster Daytona bars.
My bike. Best pic I could find showing them.
Tach Here
Speedo Here
I may change speedo out, not sure. This one is fairly big, but I like the GPS part.
If you read these four Carroll Smith books you'll be more knowledgeable than just about every person here. They are by an large the foundational bibles of modern race car building, maintenance, and design. Don't let any engineer tell you differently. All of this info is easily applied to motorcycle mechanics, design, and engineering.
https://www.amazon.com/Tune-Win-science-development-tuning/dp/0879380713/ref=asap_bc?ie=UTF8
https://www.amazon.com/Engineer-Win-Carroll-Smith/dp/0615754090/ref=asap_bc?ie=UTF8
https://www.amazon.com/Fasteners-Plumbing-Handbook-Motorbooks-Workshop/dp/0879384069/ref=asap_bc?ie=UTF8
https://www.amazon.com/Prepare-Win-Bolts-Professional-Preparation/dp/0615547338/ref=asap_bc?ie=UTF8
I thought about it some more and I think white light will grow on me. I was looking at this headlight in Amazon and I think I'd like it.
The specs say it will work with 12V, which is what my headlight voltage is. My power is 60/55W while the replacement one is 80W for the fixture.
I'm guessing this wouldn't work with my bike?