(Part 2) Best products from r/Dynavap

We found 47 comments on r/Dynavap discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 258 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.

23. Boveda for Herbal Storage | 62% RH 2-Way Humidity Control | Size 8 Protects Up to 1 Ounce (30 Grams) Flower | Prevent Terpene Loss Over Drying and Molding | 10-Count Resealable Bag

    Features:
  • Struggling with dry and stale items? Looking to keep your supply fresh? Grab our 10 count Boveda humidity pack sealed in an airtight zip lock bag keeping your container packs fresh and ready to use for up to two years. Avid users know the key to good items is freshness, take advantage of Boveda's bulk 62% container packs and keep the good times rolling. As the global leader in two way container put your faith in Boveda to protect the potency and effectiveness of your items.
  • Made with patented formula of all-natural salts and purified water, Boveda container packs help retain the natural items within your supply for a cleaner and more effective product. Our Boveda two way container packs allow for long lasting potency and aroma, place your humidity pack in an airtight container keeping it dense and moist for up to 2-6 months of freshness. Add more humidifier packs in your glass storage container to keep them lasting for an extended period of time.
  • Boveda keeps the Relative Humidity (RH) stable within your glass storage container, choose between our 58% or 62% container packs depending on your need. The 58% Boveda packs for container are ideal for your smaller supply and the container packs Boveda creates at 62% work best with larger amounts of product. When your Boveda container packets start to become ridged or hard it is time to change it out.
  • The 62% size 8 Boveda container packets fit perfectly into various sizes of storage containers, bulk airtight tubs, container and much more. Their compact size allows you to store more product while keeping it fresh. Boveda created a formula of all-natural salts and purified water that help create a restorative barrier of monolayer water molecules that hydrate and protect the natural items within your product.
  • Each 10 count of our Boveda container packs are securely packaged in an airtight high-barrier resealable zip lock bag. Keeping your extra container hydration packs securely stored while not in use will extend their life span up to two years. Experience high quality items even months after purchase due to our precise Relative container when using Boveda 62% container packets. The Boveda 62% size 8 packet is compact making it ideal for smaller glass storage containers and travel.
Boveda for Herbal Storage | 62% RH 2-Way Humidity Control | Size 8 Protects Up to 1 Ounce (30 Grams) Flower | Prevent Terpene Loss Over Drying and Molding | 10-Count Resealable Bag
▼ Read Reddit mentions

35. Cofufu 5 Pcs Dual Row 6 Position Screw Terminal Strip 600V 15A + 400V 15A 6 Postions Pre Insulated Terminal Barrier Strip Red /Black 10 Pcs

    Features:
  • PACKAGE INCLUDED - 5 PCS Terminal Strips, 10PCS (red:5 + black:5) Jumpers. Terminal strips rated voltage: 600V. Jumpers voltage: 400V. Optional Current: 25A or 15A. Cofufu is all about quality and customer service. 24 months warranty! If for any reason you are not satisfied, please give us an opportunity to improve your experience by contacting us through "Your Orders" tab in your Amazon account.
  • EASY INSTALLATION - Installation is a breeze. There are two screw holes at each sides of the terminal blocks, you just need to fix them with screws and connect cables. We provide various of terminal blocks, to meet your different needs of wiring on machinery, electrical power, home appliance, computer or other automatic equipment.
  • PRACTICAL TERMINAL BLOCKS - Our screw terminal strips can help you to connect bare wires to avoid clutter, while jumpers allow signals or power to be distributed neatly, making wiring connection simpler and more efficient. With screw terminal blocks, you can quickly disconnect a wiring branch without removing the entire system.
  • SAFETY DESIGN - Compared with traditional terminal strip blocks, ours’ come with protection covers to avoid accidental touching when use. We also provide red and black jumpers to help customers distinguish positive and negative wire when installation.
  • HIGH QUALITY MATERIAL - The wiring terminal strips are made from polycarbonate and nickel-plated brass with excellent electrical al conductivity and anti-oxidation performance, to keep working stably and extend lifespan.
Cofufu 5 Pcs Dual Row 6 Position Screw Terminal Strip 600V 15A + 400V 15A 6 Postions Pre Insulated Terminal Barrier Strip Red /Black 10 Pcs
▼ Read Reddit mentions

Top comments mentioning products on r/Dynavap:

u/kent1146 · 4 pointsr/Dynavap

I did a thing again.

​

I love Dynavap. I love Nintendo from my childhood. I found a way to combine them. The rough steps I used are:

​

  1. Chassis: Disassemble the NES Advantage. (guide). Clean all of the parts in warm, soapy water, because joystick is probably gross after 30+ years.
  2. Joystick: Take out the joystick. Slice off the "stick" part of the joystick with a dremel. Slice half of the bottom off with a dremel (to make room for the induction heater power supply). Drill 2 holes for the induction coil wire to pass through.
  3. PCB: You want to retain the PCB so that all of the buttons on the controller can still be pressed. They will be non-operational, but still fun to press. You need to replace A/B button switches. Use momentary switches; I used 2 spare mechanical keyboard switches (Kailh Box Navy), because I'm a keyboard nerd and like switches that are clicky as hell. In any case, drill the PCB to make room for the switches.
  4. A/B buttons: The plastic stem of the A/B buttons probably will not be the right height for your new switches. Use a dremel to shave off the plastic stem until it is the right height for your switches.
  5. Induction Coil Power Supply: Bend the two "coils" off to the side. You will likely need to cut the copper coils going to the PCB, and re-solder them back on. The coils will not have enough "slack" to allow you to bend them without modification. Once done, the two coils fit perfectly in two of the joystick mounting posts.
  6. Power: Install a 12V DC input jack; install an on/off switch for main power.

    Parts List


  • (O) = Optional; (R) = Required
  • (R) Heating: Induction Heater power supply & coil ($13)
  • (R) Glass Stem: Cloupor Cloutank M3 Pyrex Glass($4)
  • (R) Power Delivery: MOSFET trigger module 400W / 15A ($7) <-- you can find this for $1 on eBay; but delivery takes 1 month.
  • (R) DC Input jack: DC Input jack 5.5mm x 2.1mm, 10 pack ($11)
  • (R) Switch (operating on/off): [Momentary push button switch]. I chose to use 2 Cherry-clone mechanical keyboard switches.
  • (R) Power Supply Unit: Kastar 12V 6A Power supply (link). Thank you /u/crossfires for the recommendation! Works beautifully!
  • (O) Switch (main power, only DC or batteries): On/off toggle ($3) <-- Look for any switch that is single-pole single-throw (SPST) toggle switch. Buy this switch if only using 1 power source. Buy the switch below if you are using both DC power and batteries.
  • (O) Terminal block: 6-position terminal strip blocks ($12 for 10-pack)

    ​

    Miscellaneous parts:


  • Electrical wire
  • Electrical tape
  • Various screws, nuts, bolts, etc.
  • Craft glue
  • Sandpaper
  • Scrap craft wood / boards (you can buy this at home depot or craft shops. Look for 1/4" craft wood boards; about $10 per large board)
  • Tools used: Screwdriver | wire stripper | needle-nose pliers | hacksaw | dremel/rotary tool | soldering iron | drill | drill bits and spade bits Wire everything up, close up the chassis, and you're good to go.

    ​

    ​
u/Naaarrfff · 1 pointr/Dynavap

[503 Torch](QG Mini Jet Pencil Flame 503 Torch https://www.amazon.com/dp/B06Y2J74T8/ref=cm_sw_r_cp_api_GT9TBbBEN4KSH)

Single flame, pretty cheap, works well. Just make sure to turn it off before you put it down😁

As others are saying double/triple flame will be better outside but might give you a little less control on temps/a faster heat up.

Edit:
I also picked up a titanium tip and a water wand and use that directly on a bubbler, pretty much my favorite combination.

u/stonocrates · 2 pointsr/Dynavap

Updated from a post I made last month:

Welcome to the fam!

Cheap option: This 5-pack of Eagle lighters.

Pro option: This Blazer micro torch.

Fancy option: This Xikar Allume lighter.

Impatient option: This dual-jet Xikar Tech lighter.

A year later, two of the five Eagle torches are still working, which is good for the price and they make fine backups. The Xikar Allume is lovely, feels great, lights every time, the tank is really small though. The Blazer is my all-day everyday torch.

The Allume line also has a dual torch, which has a larger gas tank but burns it faster. In general I prefer single torches, they heat more slowly, so the heat has more time to "soak" into the tip, which means the oven stays hotter for longer when you take your drag, providing fuller extraction and more satisfying clouds.

u/greenops · 1 pointr/Dynavap

Then you are probably good on the butane. I had your same issue even with good butane. Went through two torches in a matter of weeks and I don't even use every day. Bought this torch and it's worked great with my vector 14 times filtered butane.

u/Pickles_1989 · 2 pointsr/Dynavap

I used three 18650 batteries soldered in series with a battery manager. Yeah removing the button harness would have definitely saved space.

u/Bridalph · 5 pointsr/Dynavap

If you have an OmniVap, be sure to spend the extra 2 bucks to get the ti version! LOL https://www.amazon.com/dp/B079VD5635

u/low_blocker_side · 7 pointsr/Dynavap

Hey u/beasthoss! thanks for posting this. You saved me some money and clarified a few things regarding what components i should be looking for but i have a question regarding the battery options. I know that wiring in the 18650 battery pack would require a BMS but as an alternative, would an external pack like this work https://www.amazon.ca/gp/product/B00MF70BPU/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 with a male to male power cable if i wanted to go portable?

u/SimianSlacker · 1 pointr/Dynavap

I just got this: https://www.amazon.com/gp/product/B074BCLPN3/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 and it's been pretty awesome. My second favorite is the Vertigo Cyclone II and third is my Vertigo insert for my Zippo. The butane quality makes a big difference, here is the stuff I've been using and had no issues: https://www.amazon.com/Colibri-Premium-Butane-Refill-Lighter/dp/B005ME902S/ref=sr_1_4_s_it?s=hpc&ie=UTF8&qid=1537313074&sr=1-4&keywords=colibri+butane+fuel

I think there is a chart on FC that has different butane and their quality, Ronson is probably the worst.

u/trump_farted_beaver · 3 pointsr/Dynavap

Krud Kutter has been my best degreaser for DV products; just it... ivory to wash and rinse.

its on amazon https://www.amazon.com/gp/product/B00B8WHOLM/

u/gordo58 · 1 pointr/Dynavap

I haven't tried it yet. I read about it recently on FC and just orderedthem this morning. But, yes, it's supposed to push/scrape the condenser clean iirc.

​

https://www.amazon.com/gp/product/B01913RBYY/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

u/Srb3ard · 3 pointsr/Dynavap

I have two like the one pictured and a few triple and a quad flame and yes one was a lemon. I settled on this one https://www.amazon.com/gp/product/B000L7V5JM/ref=ox_sc_saved_title_3?smid=ATVPDKIKX0DER&psc=1 and while it's pricey it's always worked.

u/reddit455 · 1 pointr/Dynavap

FWIW.. they might all be gone. they have the same message up on both versions.

https://www.interplanetarydevelopment.com/products/silo-xl

Note: We are currently working on an improved version of the Silo. It should be ready in 4-7 weeks!

​

​

but amazon has a lot of "doob toobs"..

Doobie Doob Black Tube Steel Metal Air Tight Oder Resistant Stores Cannabis Marijuana King Sized Doobs Joints

https://smile.amazon.com/Doobie-Tube-Resistant-Cannabis-Marijuana/dp/B07D6YYVPP

​

packs of plastic ones

https://smile.amazon.com/dp/B07MVRYC5T/ref=psdc_10342497011_t1_B072FGR1FF

​

if you can't find those in the UK.. try "cigar" tubes.

u/bobandshawn · 3 pointsr/Dynavap

Had this one for three weeks now. Sleek, Powerful, Expensive looking, cheap!

​

https://www.amazon.com/gp/product/B07VF5CDTV/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

u/cirenj · 2 pointsr/Dynavap

The enclosure I used: https://www.amazon.com/dp/B07TS6RY85/ref=cm_sw_r_cp_apa_i_AyhxDbV7EHBCN

The 5A power supply (5A and you don't have to use a mosfet): https://www.amazon.com/dp/B01461MOGQ/ref=cm_sw_r_cp_apa_i_GzhxDbQWPT5QR

I used a glass slide tube for inside of the coil. You will have to rewrap the coil on the IH to fit around the slide, not hard at all: https://www.amazon.com/dp/B001FWYAWQ/ref=cm_sw_r_cp_apa_i_MAhxDbTK5P2YY

The actual IH: https://www.amazon.com/dp/B01GDVVANA/ref=cm_sw_r_cp_apa_i_lChxDb0DGE3TM

The 5v switch w/ wiring harness (you don't need any extra wires this way): https://www.amazon.com/dp/B075QBJVTS/ref=cm_sw_r_cp_apa_i_fDhxDb7HTYE19

A Unibit would be a good thing to have to get the 3 holes drilled in the box. A hotglue gun and a screwdriver and your set....

u/danderingnipples · 1 pointr/Dynavap

I've been through a few lighters, this is the best I've found yet... it's quite bulky, but I have to carry epipens anyway, and it's roughly the same size (if not a little thinner).

u/Environmental_Act · 2 pointsr/Dynavap

The one u/Kent1146 recommends they were 2 for 10 on amazon the 25amp bms

2Pcs 3S 11.1V 12.6V 25A W/Balance 18650 Li ion Lithium Battery PCB Protection Board https://www.amazon.com/dp/B07JMY631D/ref=cm_sw_r_cp_api_i_48fADbGR1XBYE

u/cakeuser420 · 4 pointsr/Dynavap

Silver
Bey-Berk Doobie Doob Tube Steel Metal Air Tight Oder Resistant Stores Cannabis Marijuana King Sized Doobs Joints https://www.amazon.com/dp/B075VCZRHZ/ref=cm_sw_r_cp_apa_i_LQ8iDbYTKBRWC

Black
Doobie Doob Black Tube Steel Metal Air Tight Oder Resistant Stores Cannabis Marijuana King Sized Doobs Joints https://www.amazon.com/dp/B07D6YYVPP/ref=cm_sw_r_cp_apa_i_BR8iDb2YC3BKX

Purple
Doobie Doob Matte Purple Tube Steel Metal Air Tight Oder Resistant Stores Cannabis Marijuana King Sized Doobs Joints https://www.amazon.com/dp/B07HCP9J13/ref=cm_sw_r_cp_apa_i_vP8iDbGEERVFM

u/SmurfJerky · 1 pointr/Dynavap

https://www.amazon.com/Blazer-PB207CR-Butane-Refillable-Lighter/dp/B001EDW9ME is this the one you mean? im hoping to get a good torch cuz im tired of fuckin around with the shitty ones