(Part 2) Best products from r/FZ07

God I hope this formats correctly - I am a neophyte.

Exhaust - http://www.ixilusa.com/ixil-l3xb-black-hyperlow-xl-full-exhaust-yamaha-mt-07-2014-2015/

Super deep and loud sound - videos online don't do it justice, its unbelievably loud when the baffles are out. Had to have the cat cut out of it. Be aware they have a cat in the V section before the end of the pipe.

Removed the snorkel covering the airbox - I was told its basically blocks airflow.

ECU Flash / Dyno by 2wheelDynoWorks - https://2wheeldynoworks.com/shop/ecu-flashing-service/15-17-yamaha-fz07-mail-in-ecu-flashing-service/

Nels himself worked on my bike - super stoked (shout out to Nate too) They have the best customer service.

Active Tune - https://2wheeldynoworks.com/shop/ecu-flashing-service/yamaha-activetune-afr-closed-loop-self-tuning-ecu-kit-2/

Tune as you go

Bike side harness - https://2wheeldynoworks.com/shop/ecu-flashing-service/ftlink-v1-1-6-pin-bike-side-harnesses/

For tuning later

Windscreen - https://www.revzilla.com/motorcycle/puig-touring-naked-new-generation-windscreen-yamaha-mt-07-2018

I got light smoke, I think it goes better with the bike and pushes wind over my shoulders even at 80+ mph

Protection - https://tstindustries.com/Womet-Tech-Total-Crash-Protection-Pack-for-Yamaha-FZ-07-MT-07-2015.html

Basically got everything from this except the bar ends

Bar Ends - https://motostarz.com/collections/mt-07-2018/products/rhinomoto-barends-mirror-mounts-for-yamaha-fz-mt-models

Super easy to replace mirrors etc with these - and they add protection

Throttle tube - https://www.amazon.com/gp/product/B005C59NO2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

90 to 60 degree conversion - its amazing for the price

Dash Screen Protector - https://www.amazon.com/gp/product/B078SMP4ND/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Mirror stem deletes - https://www.amazon.com/gp/product/B07BN8QGPV/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Current Mirrors - https://www.amazon.com/gp/product/B01N6GB7DZ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Mirrors in photo - https://www.amazon.com/gp/product/B003RESHVU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I like the CRG Mirrors but they get bumped and are hard to readjust - the cheap ebay/amazon mirrors work great

Headlight replacement - https://www.amazon.com/gp/product/B01H6NZ5QW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Signal replacement LED bulbs - https://www.amazon.com/gp/product/B06XK4PL33/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Super bright replacements for stock bulbs - used the original housings, they plug right in

Running light LED replacements - https://www.amazon.com/gp/product/B00JRE38EA/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

For inside the headlight housing

Tail Tidy - https://www.amazon.com/gp/product/B01BH5YGOM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Flasher Relay for LEDs - https://www.amazon.com/gp/product/B00RM26LXO/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Levers - https://www.ebay.com/itm/CNC-Brake-Clutch-Yamaha-MT-07-FZ-07-2014-2018-Adjustable-Engrave-Long-Lever/123350737715?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20131003132420%26meid%3D17a37c1b2d204ffcba65903d19a97b4a%26pid%3D100005%26rk%3D4%26rkt%3D12%26sd%3D122997203335%26itm%3D123350737715&_trksid=p2047675.c100005.m1851

Passenger peg deletes - https://www.ebay.com/itm/for-YAMAHA-MT07-FZ07-Footrest-Cover-Passenger-Footpeg-Removal-Delete-Kit-2014/253869999740?hash=item3b1bd4c67c:g:3qEAAOSw0JVbm1FQ:rk:1:pf:0

I removed the passenger pegs, needed a bracket to hold the brake fluid reservoir - also cleaned up the pegs

Havent done the brakes yet - going to replace the lines etc with steel braid.

Also want to do a sprocket / chain swap for acceleration

I used a quadlock phone mount for a little bit - but took it off because I was playing with my phone too much.

Amazon or Revilla or if your in Canada like me, Fortnine

There's lots of brands and they're as far as I can tell all the same. You definitely want one with an applicator (pro grip and Oxford definitely do) and while 1 roll IS enough for both sides of two wheels, it's JUST enough. Get two, or else when you inevitably mess up a bit applying it you're gonna be short.

It is fairly easy to put on (it's just tape, after all) but you kinda need to learn how to hold the applicator and keep some tension on the tape to apply it smoothly. It's not a challenge, but you'll almost certainly screw a bit up when first doing it.

You want if at all possible to have the wheel you're working on off the ground to apply it. If not, you'll definitely need a friend as applying it takes two hands - you'd need a friend to slowly roll the bike if you can't get wheels up.

Edit: the red and white are reflective, the orange/green/whatever else are fluorescent. I don't know what the flourescent looks like, but I'm REALLY happy with the reflective. It looks awesome even in broad daylight.

Hey y'all! Some of you asked about mods so here is a full list of what I have done so far with links.

Radiator guard - Has a nice little FZ-07 etched at the bottom.
https://www.amazon.com/gp/product/B075MCXCM7/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

Shorty levers - Mine are gray but they come in lots of colors.
https://www.amazon.com/gp/product/B0197N3KA2/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Bar end mirrors - You can find these for less but I chose these because the reviews indicated that they might be better quality than others.
https://www.amazon.com/gp/product/B00Q3UL6S6/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

Yoshimura fender eliminator - Kinda pricey for what it is but it looks really nice.
https://www.amazon.com/gp/product/B00T6J9IM2/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

Motodynamic integrated tail light - I also looked at the TST but after looking at some videos decided on this one.
https://www.amazon.com/gp/product/B015NN3YUG/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Proton 500 flush mount LED - These things are brighter than the sun. You can also change the signal pattern which I thought was cool.
http://www.hightechspeed.com/products/Proton500/yamaha.html

Flasher relay - Prevents hyper flash and let me get rid of resistors.https://www.amazon.com/gp/product/B00RM26LXO/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Stompgrip volcano black - I really like these and they have great grip. You can also get them in clear from their website if that's your thing.
https://www.amazon.com/gp/product/B018NH74BE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Akrapovic TI - This exhaust sounds sweet, I also purchased the CAT for it through cyclegear.
https://www.amazon.com/gp/product/B00L44J56G/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1


Other mods that i'm considering in the future
Stainless Steel braided brake lines, FTECU on the bike flash kit, T-Rex Racing no cut combo.


Bonus - https://i.redd.it/en8vfnpv46u01.jpg

It’s not hard, just take your time with it and make it looks pretty. I used 1” wrap, I like the look of a tighter wrap though. And it claims to “increase performance” because your keeping more heat away from the engine, not sure if I buy that or not, I did it for cosmetic purposes tbh lol. I think it looks awesome, here’s a link for the stuff I used :)

Wrap-
Design Engineering 010107 Exhaust Heat Wrap, 1" x 50' Roll - Black https://www.amazon.com/dp/B000E267JM/ref=cm_sw_r_cp_api_i_KoGjDb06KEJQT

High temp Silicone paint-
Design Engineering 010301 High-Temperature Silicone Coating Spray - Black https://www.amazon.com/dp/B000MY3ML8/ref=cm_sw_r_cp_api_i_LvGjDb07SXQKQ

The reviews on this are all over the map, but I love it. Once you spray it on it sticks to the rim and eats away at the chain lube, mud, and other road grossness that accumulates on your wheels. Get a nice solid brush to help reach into the crevices and enjoy your showroom wheels.

I bought one of these to clean my chain. Super cheap and works like a charm for almost any bike.

I've had bad luck with torque wrenches in the past, so I decided to go a different route. I gave some "Torque Adapters" a try from ACDelco, and I was really pleasantly surprised! They come in 1/2 inch and 3/8th inch flavors. They are quite easy to use as well!

Not OP, but I use S100 with great results. The wheels always look brand new when I'm done, and I'm never not shocked at how clean they wind up.

Nelson Rigg Sport Touring Tailbag and Nelson Rigg SPRT-40 Saddlebags. Haven't used them much yet but I'm happy with the fitment and ease of install/ removal.

This is what I used. Then just drilled a hole in the top corners of a license plate frame and ran the wire through. I will get a picture of them when it is light outside.

Here is a picture I made when I first did them, the white ones you see here wasnt very bright but these black ones seem to be better. They also look better with the black frame. http://imgur.com/3E44Dtn


Partsam LED Strip Light Bar 2X 6 LED Black Third Brake Light Motorcycle Turn Signal Backup License Plate Universal Amber Lights Strip https://www.amazon.com/dp/B015H90NBO/ref=cm_sw_r_cp_apa_i_pZbIDbBPDH7BV

I actually just watched the oil change video from Jake TheGardenSnake where he links the crush washers he used for his 2016 FZ07. Thanks for the help!

Video: https://www.youtube.com/watch?v=wwAQx7WCObM

Crush Washers: https://www.amazon.com/gp/product/B00K3B595M/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=jakesnake-20&linkId=c4a1fcd63fb9b300320c5cad4b0c189c

I think they are 14x22.3 but other sizes might work okay. https://www.amazon.com/dp/B00K3B595M/ref=cm_sw_r_cp_api_PxEVybFFTKRX2