(Part 2) Best products from r/G35
We found 12 comments on r/G35 discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 32 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. MagnaFlow 11386 Exhaust Muffler
Stainless steel constructionAll mufflers are engineered with a wide open performance designDeveloped using our signature deep tone soundMade in U.S.A.In/Out Diameter:2.5 inch/2.5 inchFit Type: Vehicle Specific
22. F2C 2200W Heavy Duty Electric Demolition Jack Hammer Concrete Breaker Power Tool Kit 2 Chisel 2 Punch Bit Set W/Case, Gloves
- Voltage: 110V/60Hz, Input motor:2200 watt
- No Load Speed: 1900 Impacts Per Minute(55j)
- Blowmod Case Inculded
- Includes: 1-1/8" Bull Point Chisel, 1-1/8" Flat Chisel
- Perfect for demolition, Trenching, Chipping, breaking holes in concrete, block, Brick, Tile Stucco, Removing a foundation, concrete slab, oil chimney and much more
Features:
23. 3M General Trim Adhesive, 08088, 18.1 oz Net Wt
- Recommended for bonding carpet fabric and plastic to metal
- Secure bonding to hard, impervious surfaces
- Aerosol adhesive offers easy application
- Dries to a clear color for a low profile appearance
- Offers good heat and water resistance
- For industrial/occupational use only. Not for consumer sale or use.
Features:
24. EpandaHouse Compatible with 03-05 Infiniti G35 Coupe (W/Stock HID) LED CCFL Halo Black Projector Headlights
Black housing Headlights with CCFL (Cold Cathode Fluorescent) Angel Eye Halo RingsComes with driver and passenger sidesMade to meet or exceed original manufacture standard.SAE and DOT complaint to FMVSS-108 standards. Street legal.Direct replacement. Please see description for fitment.
25. Rear Window Louver Compatible With 03-07 Infiniti G35 Coupe Unpainted PP by IKON MOTORSPRTS
- Fit for 03-07 Infiniti G35 Coupe
- Material: ABS Plastic | Color:Unpainted Matte Black
- Package Includes: 1x Rear Window Louver
- Instruction is not included, professional installation is highly recommended.
- 30 Days Limited Warranty
Features:
26. PAC ROEM-NIS2 System Interface Kit to Replace Factory Radio and Integrate Factory Amplifiers for 1995-2002 Nissan Vehicles with Bose Audio Systems,Black
- System interface to replace factory installed receivers and integrate factory amplifiers
- Adjustable 4-channel RCA outputs
- Isolated transformer inputs and outputs
- For 1995 - 2002 Nissan vehicles with Bose audio system
- Easy Installation
- System interface to replace factory installed receivers and integrate factory amplifiers
- Adjustable 4-channel RCA outputs that provide Line Level Matching
- Isolated transformer inputs and outputs
- Trigger wire included
- For 1995-2002 Nissan vehicles with Bose audio system
Features:
27. Toyo Extensa HP Performance Radial Tire - 255/35R20 97W
- This product is not for sale in the state of Arkansas
Features:
28. StanceMagic Set of 20pcs Chrome 12x1.25 Closed End Lug Nuts - OEM Mag Washer Style Seat, 1.5 inch Length, 13/16" 21mm Hex - Compatible with Nissan and Infiniti Factory Wheels
- Please check Year/Make/Model in Description. Compatible with Infiniti FX35 FX45 FX50 G20 G35 G37 I30 I35 J30. Compatible with Infiniti M30 M45 Q45 Q50 Q60 Q70 QX50 QX60 QX70. Compatible with Nissan 200sx 240sx 240z 260z 280z 300zx 350Z 370Z. Compatible with Nissan Altima Axxess Cube Maxima Murano Primera Rogue Sentra. Vehicle Must Have M12x1.25 12x1.25mm Studs.
- Total Length: 1.50 inches | Thread Size & Pitch: 12x1.25 | Seat Type: Mag Style | Color: Silver / Chrome | HEX SIZE: 21mm (13/16") | STYLE: OE/Factory Mag Style Lug Nuts. See Diagram for Measurements.
- SAFETY ADVISORY: Wheel hardware is an important safety component. Ensure these lug nuts are the proper size before installing. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion.
- INCLUDED: One Package contains a 20 Pack of OE/Factory Mag Style Lug Nuts. These chrome Lug Nuts arrive in a small compact box that is portable for easy storage. You will need certain tools for lugnut installation, including floor jacks and torque wrench. You'll also need a 21mm (13/16") Hex Socket Key Tool.
- These 12x1.25 lug nuts are not an oem or genuine OE part, but are compatible with various Geo, Chevy, Infiniti, Mercury, Nissan, Subaru, Suzuki vehicles. We are confident you'll find our lug nuts to be a comparable OEM replacement, at a significant cost savings. Our lug nuts are made with with strong cold forged steel. Heat treated to ensure dependable strength, durability and performance. Triple coating provides the ultimate in corrosion, rust and scratch resistance.
Features:
29. Gorilla Automotive 73027SMB Short Mag Open End Lug Nuts (12mm x 1.25 Thread Size)
12mm x 1.25 Thread size13/16" Hex size1.125" Overall lengthShort mag with .500" shank/.685" shank diameterPack of 4 with washers
30. ECCPP Replacement Parts for 5x4.5 Hubcentric Wheel Spacers 25mm 5x4.5 to 5x4.5 5x114.3mm to 5x114.3 M12x1.25 1" for Nissan 370Z 300ZX Altima for Infiniti 350Z FX35 G35 G37 I30 I35
【WHEEL SPACERS 5x4.5 1 inch FITMENT】The hubcentric wheel spacers 5x4.5 compatible with【5x4.5 WHEEL SPACERS HUB CENTRIC PARAMETER】Thickenss:1" or 25mm;Inner Diameter:66.2mm;Vehicle Bolt Patter:5x4.5 or 5x114.3mm;Wheel Bolt Pattern:5x4.5 or 5x114.3mm;Thread Pinch:12x1.25【5X114.3 WHEEL SPACER...
31. 20mm (0.75 inch) Hubcentric 5x114.3 Wheel Spacers (66.1mm bore, 12x1.25 Studs) Compatible with Nissan Infiniti G35 G37 Q50 Q60 Q70 FX35 FX50 350z 370z Altima Maxima 300zx Sentra - Black 66.2mm 2pcs
StanceMagic Hubcentric Wheel Spacers with Lip for vehicles with 5/114.3 (5/4.5") Bolt Pattern and 66.1mm Centerbore. Compatible with Nissan 1995-1998 240SX (non Base Model), 300ZX, 350Z, 370Z, 2002-2019 Altima, 1989-2018 Maxima, 2003-2019 Murano, 2008-2019 Rogue, 2007-2012 Sentra SE-R, 2012-2019 Sen...
Sorry I completely missed this comment man. Here is the link to the one i purchased. Just so you know, its not a direct fit. You actually have to cut the resonators off the replica and weld the xpipe in its place. I remember paying around $80 i think for them to cut the resonators and weld the xpipe. I did think about getting different kind of tips down the like but i'm currently trying to sell the car so all the projects for it are on hold. Sorry for the late response, hope i'm not too late. https://www.amazon.com/gp/product/B000XQJZ34/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1
https://www.amazon.com/F2C-Electric-Demolition-Concrete-Breaker/dp/B0718W1M14/ref=asc_df_B0718W1M14/?tag=hyprod-20&linkCode=df0&hvadid=310828259700&hvpos=1o3&hvnetw=g&hvrand=7162423722310718020&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9028248&hvtargid=pla-568083986606&psc=1&tag=&ref=&adgrpid=65583250281&hvpone=&hvptwo=&hvadid=310828259700&hvpos=1o3&hvnetw=g&hvrand=7162423722310718020&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9028248&hvtargid=pla-568083986606
I got you bro ;)
I used 3M General Trim Adhesive to fix mine. I did it 2 years ago and it’s still holding up fine.
Yo get these instead
EpandaHouse Compatible with 03-05 Infiniti G35 Coupe (W/Stock HID) LED CCFL Halo B... https://www.amazon.com/dp/B00SNNNSDW/ref=cm_sw_r_sms_c_api_i_TijSDbYV7TKA8
https://www.amazon.com/Window-Infiniti-Unpainted-IKON-MOTORSPRTS/dp/B07P7SX3W8
I'm not a 100% sure... I bought all the parts and then had a shop install it...
I did purchase this so I was under the assumption that the Bose stuff was still being used: PAC ROEM-NIS2 System Interface Kit to Replace Factory Radio and ... https://www.amazon.com/dp/B000CE9OY2/ref=cm_sw_r_sms_awdb_t1_kewKBbKMG7D5B
The installer said he wasn't needed, but I didn't get it back, so I'm not sure if it was installed or if they just kept it.
Toyo Extensa HP Performance Radial Tire - 255/35R20 97W https://www.amazon.com/dp/B008ZVAJK2/ref=cm_sw_r_cp_apa_i_zoxbBbDBDBFSE
These look bad ass on mine. The front are 90W and rear is 97W.
20pc Silver Chrome Mag Style Lug Nuts - 12x1.25 Thread Size - 1.5" Length - Installs with 21mm or 13/16" Hex Socket - For many 5Lug Nissan & Infiniti Vehicles Cars https://www.amazon.com/dp/B00OJO89WY/ref=cm_sw_r_cp_api_ttNZBbK6Y8Z93
I ended up buying these. Fingers crossed they work
They are OEM G37S 19” rims. I had the same vibrations with the spacers on with my stock 18” rims as well. No vibrations without spacers w/ the stock 18” wheels. I’m sure I’d have no vibration with the 19” wheels without spacers, but haven’t tried it because the spacers are necessary for fitment.
They’re both 66.1 bore size as well as the spacers. I don’t have pics of the spacers but I’ll add the links. Disclaimer, they are cheap spacers which would very well be my problem, but I’ve heard of vibrations on the forums even with high quality spacers ... due to a deep bore?
20mm spacers
25mm spacers
Edit: spelling
BEFORE YOU DO THIS. Try this instead as it's cheaper. Buy some Motul DOT 5.1.
Find the clutch fluid reservoir. Open it up and look at the fluid. It's most likely brown and sludge like when it should be a more golden yellow. Get a turkey baster or some type of syringe and pump that stuff out. Once it's all out, get in your car and pump your clutch around 30 times. Get out and if there's more fluid in the reservoir, suck that liquid out as well. Repeat this procedure until all the liquid is out.
Then pour the 5.1 fluid in. The reason your clutch is getting stuck is because the fluid is boiling over and no longer functional. People recommend DOT-4 but in my experience it still boils over in summer time. I've been using 5.1 ever since and not have had any problems.