(Part 2) Best products from r/InfinityTheGame
We found 19 comments on r/InfinityTheGame discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 36 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. Tamiya America, Inc Masking Tape, 6mm, TAM87030
- Made from high quality materials and designed for long lasting performance.
- Use Tamiya stock and hop-up replacement parts, accessories, and more to get the most out of your models
- This is for use on RC and model products, consult your user's manual for exact parts listings.
Features:
22. 3M Double Coated Urethane Foam Tape 4008 Off-White, 1 Inch x 4 Yards 1/8-inch
1/8 inThick Open Cell Urethane Foam Flexible Carrier with High Shear, High Temperature Resistant Acrylic AdhesiveUse to Fill Gaps and Bond Irregular SurfacesDistributes Stress Uniformly Over Bonded AreaApply by Hand or with DispenserThick Open Cell Urethane Foam Flexible Carrier with High Shear, Hig...
23. Hallmark Keepsake Christmas 2019 Year Dated Blade Runner Police Spinner Ornament
- Take a futuristic look at the year 2019 with this Police Spinner Christmas ornament featuring the law enforcement hover car from the 1982 science-fiction film "Blade Runner."
- This artist crafted Christmas tree ornament features wheels that turn. Pre-packaged in a box for easy gift giving, preservation and storage. Dated 2019 in copyright.
- With unparalleled artistry and exceptional detail, each festive and collectible Keepsake Ornament is made for years of celebrations.
- From preserving precious memories to commemorating special milestones and interests, there's a Hallmark ornament for everyone on your gift list.
- Plastic Christmas tree ornament is lead-free and measures 2.43" W x 1.24" H x 4.14" D.
Features:
24. IGOGO 100 PCS Clear Epoxy Stickers Craft Bottle Caps Stickers for Hair Bows Pendants Scrapbooks 1 Inch
- Measurements:1 Inch
- Quantity:100 Pieces
- Materials:Epoxy Resin
- Seals and Protects Pictures to 3D Effect
- Clear Epoxy Stickers for Bottle Caps Pendants Christmas Decorations ect
Features:
25. Bob Smith Industries Maxi-Cure Extra Thick, 2 oz.
Maxi-cure extra thick 2oz ca adhesive glueMaxi-cure extra thick ca is the best ca for most plasticsWorks best on: Soft wood, hard wood, glass & metal, fiberglass, ceramics, hard plastics, rubber
26. Mod Podge CS11302 Waterbase Sealer, Glue and Finish, 16 oz, Matte
Multipurpose, all-in-one sealant, glue, and finish. Matte finishQuick-drying for multiple coat build up. Dries clearApply with brush or sponge applicatorDries in approximately 15-20 minutes and can be sanded to a smooth finishWater-based, non-toxic, made in the USAQuick-drying for multiple coat buil...
27. Universal Work Holder PEG CLAMP VISE+ 8 pins
- This is a new universal holder
- Used for repairing and engraving jewelry
- The eight removable pins accommodate large and small items during engraving or repair
- Jaws open to 3/4" (19 mm) and close to securely hold items in place
- Pins measure approximately 1/8" (3 mm) diameter x 1/2" (13 mm) tall
Features:
28. Beadaholique 200-Piece Epoxy Stickers for Bottle Cap Pendants, 1-Inch, Clear
Color: ClearQuantity: 200 PiecesStyle/Shape: Epoxy Stickers
29. Cutters - Xuron Micro-Shear Flush 410
Country Of Origin: United StatesModel Number: 410Item Package Dimension: 8.299999991534" L x 2.899999997042" W x 0.599999999388" HItem Package Weight: 1.0 lb
30. Master Airbrush Multi-purpose Gravity Feed Dual-action Airbrush Kit with 6 Foot Hose and a Powerful 1/5hp Single Piston Quiet Air Compressor
- Professional Master Airbrush Airbrushing System with A Model G22 Multi-Purpose High Performance Precision Airbrush with A 1/3 Oz. Gravity Fluid Cup and A 0.3Mm Fluid Tip.
- Premium Master Airbrush High Performance 1/5 Hp Air Compressor with Air Filter Water Trap with Pressure Regulator Along with An Airbrush Holder For 2 Airbrushes.
- Includes Master Airbrushes Best Selling User Friendly and Versatile Gravity Feed Airbrush That'S Commonly Used For: Hobbies, Crafts, Auto Graphics, Temporary Tattoos, Cake Decorating, Fine Art, Nail Art and More!
- Great Starter Airbrush Kit For Beginners and Students, As Well As For Advanced Artists Since It Works Excellent For Most Airbrushing Applications and Also with Most Types of Paint Spray Media. Includes Bonus How-To-Airbrush Manual & Guide Booklet By Master Airbrush.
- Buy with Confidence, If you are not satisfied with this airbrush system at anytime within the First Year of Purchase Or The Compressor At Anytime within The Second Year of Purchase, We'Ll Provide A Refund Or Replacement.
Features:
31. Bob Smith Industries BSI-151H Insta-Set Super Glue Accelerator,Clear, 2 fl. oz.
- Made in the USA
- Compatible with All Surfaces & Super Glues
- Strawberry Scent
- Activates CA in 6 to 8 seconds without any degrading of the CAs strength
- Proud Sponsors of Wounded Warrior Project
Features:
33. Beadaholique 100-Piece Epoxy Stickers for Bottle Cap Pendants, 1-Inch, Clear
Color: ClearQuantity: 100 PiecesStyle/Shape: Epoxy Stickers
34. Fiskars 174360-1001 Medium Circle Squeeze Punch, 1 Inch, White
- Use cleanly punched-out designs as embellishments on homemade cards, scrapbook pages, collages and much more
- Unique design makes it up to 2X easier to punch shapes than other shape punches on the market
- Size: 1 inch
- For best results, use on 65-lb. cardstock and lowerLifetime warranty
Features:
https://www.amazon.com/Tamiya-300087030-Masking-Tape-6mm/dp/B0000WRZZQ/ref=sr_1_7?ie=UTF8&qid=1479390004&sr=8-7&keywords=tamiya+masking+tape
Use this / they also have a tape for curves. It helps a ton and has low adherence so you don't have to worry about pulling paint up. I really enjoy the profile and the model itself looks cool to me but it's all preference. I do have to say it was the easiest tag to put together that I've done.
I use Double Sided Foam Tape. It's designed to hold stuff like mirrors on tiles so it's super strong and it's easy enough to remove from minis since all you need to do is slip a knife into the foam bit then roll off the remaining tape from the mini contact point. I usually attach it to whatever I'm going to hold on to when I paint the mini..normally a cork bung.
For smaller bits or for things that have 2 sides like a cape I use Blu-Tak (mounting putty in the USA). Forms a decent hold but lets you remove it and remount in seconds.
I bought this punch today so I could make my own counters.
I printed out the official counters that you can download off the main site. I had to cut the page into long strips so they'd fit in the punch, but I popped out an entire page in minutes.
If you want something more substantial in thickness, like the pro made counters, I suggest these. They're already adhesive.
http://www.amazon.com/gp/product/B00AFRWINA/ref=od_aui_detailpages00?ie=UTF8&psc=1
-d
On the subject of tokens, I have Icestorm, and those tokens are pretty vulnerable...
So would these things then make it so that the tokens would be a 3D element? I really like the Micro Art Studios tokens, but they're sold out. Would these be equivalent?
Maxi-Cure and then Insta-set. Dab glue with the end of a toothpick, place ear to ear-hole with tweezers/pliers/etc, ask friend to spray glue on or somehow do it yourself (I've done it myself by just laying the model on its side).
Maxi-Cure: https://www.amazon.com/Maxi-cure-extra-thick-Bob-Smith/dp/B0000DD1QH
Insta-Set: https://www.amazon.com/Bob-Smith-151-Insta-Set-Accelerator/dp/B0000DD1QR/ref=pd_sim_21_1?_encoding=UTF8&psc=1&refRID=BWSCD72426BCYAMM6H0X
Go here: http://www.caseyswood.com/shoppingcart/zen-cart/index.php?main_page=product_info&cPath=54&products_id=702
And buy ~200+ of those. It'll run you about $20.
Go to Michael's (or similar store) and buy:
http://www.amazon.com/Podge-CS11302-Original-16-Ounce-Finish/dp/B001IKES5O (note the matte finish)
and
http://www.michaels.com/darice-17-compartment-bead-organizer/10091119.html?cm_mmc=Sq1_Search-_-GooglePLA-_-Darice-_-Darice%2017%20Compartment%20Bead%20Organizer&utm_source=GooglePLA&utm_medium=cpc&utm_campaign=Darice&utm_term=Darice%2017%20Compartment%20Bead%20Organizer&utm_content=10091119&srccode=cii_17588969&cpncode=42-25094047-2
Also grab a cheap brush (you'll need it for the mod podge).
After you've printed and punched the tokens, paint a thinish layer of glue on a disc, apply the token, set aside and let it dry. Do... 50+ at a time. Do it while you watch your favorite TV show re-runs or something. Keep the tokens in vaguely first to last order. Once you've attached the last token to a disc, apply a thin layer of mod podge as a seal coat, starting with the first token you did. Apply a total of two sealing coats. Make sure they're thin and applied smoothly. Mod podge can add a texture if you brush it on that way.
Dirt cheap per token (somewhere in the neighborhood of $0.19/token) and they're nigh indestructible.
EDIT: The box is to store your tokens, by the way... I seemed to have forgotten to mention that.
I got one off Amazon after seeing it in his last painting post. I like the weight of it, mitigates some of my shakiness.
https://www.amazon.com/gp/aw/d/B000RB547G/ref=ya_st_dp_summary
Don't buy wire cutters. What you want are flush cutters; Xuron 410 Micro-Shear Flush Cutter https://www.amazon.com/dp/B000IBOOWQ/ref=cm_sw_r_cp_api_UGAEybYWNV2D7
Ah, searching myself I see that. There is even ones for the same price that I paid that come with more..
But this is it: http://www.amazon.com/Master-Airbrush-Multi-purpose-Dual-action-Compressor/dp/B001TO578Q/ref=sr_1_3?ie=UTF8&qid=1450800716&sr=8-3&keywords=airbrush
Combined Army Decals 02 https://www.amazon.com/dp/B07B3MWPMF/ref=cm_sw_r_cp_apa_i_pvZTCbE3J2ZE8
I think this is the EI pack and they have one for shasvastii and morat
https://www.amazon.com/Bob-Smith-Industries-BSI-151H-Accelerator/dp/B0166FFCCS/ref=mp_s_a_1_3?keywords=ca+glue+setting+spray&qid=1571069378&sr=8-3
The models are metal, so regular plastic model cement won't work. I recommend a good gap filling CA glue. Any hobby shop would carry it, and it's available on Amazon.
http://www.amazon.com/dp/B0000DD1QQ/ref=cm_sw_r_tw_s_awdm_V0tLxbFCMCDQP
Maybe try this brand too: https://www.amazon.com/Insta-cure-filling-Bob-Smith-Ind/dp/B0000DD1QQ
It cures fast and the tube I have has lasted a long time. I have used some department store bands and had trouble. Never used gorilla, though.
Alright so here's what I would go with. The more you play, the more you'll realize what you need/use more than others.
One thing to note, I like having extra tokens, in case you lose some/faster to find at times, so something like Fireteam tokens you only need 1, but I put 2, etc.
20 Regular Order Tokens
5 Irregular Order Tokens
5 Impetuous Order Tokens
5 Extreme Impetuous Tokens
1 Lieutenant Order Token
4 Command Tokens
2 Team Leader Tokens
2 Harris Team Leader Tokens
5 Wounds
8 Dogged Tokens
15 Unconscious Tokens
2 Battle Ravaged Tokens
15 Prone Tokens
5 Suppression Fire Tokens
5 Unloaded Tokens
5 Targeted Tokens
5 Mine Tokens
10 Camo Tokens
5 40mm Camo Tokens
Instead of just buying them, I would go to http://inf-dice.ghostlords.com/markers/ and print out everything you need (if you go this route, I would make 2 of all the other Negative Effects Tokens, and a bunch of TAK tokens just to have them). Then get a 1 inch circle hole punch from your local craft store and punch them all out, then get some epoxy stickers and stick them together. That way, if you need more you can just make them.
Hope this helps!
Edit: forgot one.