(Part 2) Best products from r/Phanteks
We found 20 comments on r/Phanteks discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 35 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. Phanteks 140mm Cooling Fan (PH-F140SP_BK),Black/White
- PH-F140SP has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational stability. To create better structural strength and reduce the vibration occurrence, Phanteks redesigned the back frame of PH-F140SP.. Air flow - 82.1 CFM. Noise level - 19.0 decibels
- With the noise reduction challenges in mind, we modified the component for lower actuator noise, PCBA for lower electromagnetic noise, brushless motor structure for lower operating noise and frame rib for lower wind and vibration noise.
- The new nine high pressure MVB blades are precisely angled to generate a silent controlled airflow. The blades produces a downdraft vortex allowing for greater amount of air passage through and reduce airflow turbulence across the surface of the blades
- Composed by MOSS and SSC systems, Phanteks' UFB bearings have an effective hub-tip ratio to achieve a state of equilibrium reducing air and vibration noise.
- Eight pre-installed rubber pads are now bigger and designed to reduce more vibration.
- 400mm extension cable included to provide for better cable management and flexibility.
- PH-F140SP has a larger base size with a magnetic brushless DC motor to avoid the effects of resonance and for rotational stability. To create better structural strength and reduce the vibration occurrence, Phanteks redesigned the back frame of PH-F140SP.
- With the noise reduction challenges in mind, we modified the component for lower actuator noise, PCBA for lower electromagnetic noise, brushless motor structure for lower operating noise and frame rib for lower wind and vibration noise.
- The new nine high pressure MVB blades are precisely angled to generate a silent controlled airflow. The blades produces a downdraft vortex allowing for greater amount of air passage through and reduce airflow turbulence across the surface of the blades
- Composed by MOSS and SSC systems, Phanteks' UFB bearings have an effective hub-tip ratio to achieve a state of equilibrium reducing air and vibration noise.
- Eight pre-installed rubber pads are now bigger and designed to reduce more vibration.
- 400mm extension cable included to provide for better cable management and flexibility.
Features:
22. Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable 200mm AC-053-CN1OTN-C1
- Compatible with most GPU/motherboard components
- Redesigned for improved compatibility
- PCI E x16 3.0 compatible with 200 millimeter cable length
- EMI shielded design reduces interference
Features:
23. Phanteks - Stackable 3.5" HDD Bracket Duo Pack Cases PH-HDDKT_03,Black
Material: metal. Chassis support: Phanteks chassis - Evolv x/ future modelsApplication: 3.5” HDD/ 2.5” SSDStackable: Yes. Color: black
24. ASUS WS C621E Sage Extreme Power Intel Xeon Processor Workstation Motherboard for Two-way XEON CPU performance, with U.2, M.2 connectors, dual Gb LAN, USB 3.1 Type-C & Type-A, 10 x SATA 6Gb/s ports
- Extreme power with diverse GPU validation, even up to 4-way Multi-Graphics and total of 12 DIMM slots for hardware-intensive programs to run at brisk pace
- Two-way Xeon performance to provide extreme performance with 2-way Xeon overclocking, finely picked components with Platinum efficiency
- Reliable and stable support server-class Intel Xeon CPU and error-correcting code (ECC) memory
- Expandable on demand for feature enhancement with plentiful connectivity, including U.2., M.2, USB 3.1 Type C & a, and supporting Thunderbolt EX3 card and more
- ASUS control Center for a complete, centralized server management quick and Easy BIOS update with BIOS Flashback and ASUS Q-Design
Features:
25. CableMod Vertical PCI-e Bracket - HDMI + DisplayPort - Black
- Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall
- Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
- Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly
- Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
- Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 pcs brass extruder nozzles(1x0.3mm/1x0.4mm/1x0.5mm), 4 pcs brass volcano extruder print head(1x0.6/1x0.8/1x1.0/1x1.2) and a volcano heating block, 2Pcs teflon tube within 1.75mm stainless steel nozzle throat
Features:
26. Phanteks - ITX Upgrade Kit for Cases with Dual System Capability Riser Pcie 3.0 X1 Extension Cable Cases PH-ITXKT_02
- Material: metal. Motherboard support: Mini ITX
- Application: Phanteks chassis (Evolv x)
- Power button: Yes
Features:
27. Phanteks Eclipse P400A ATX Mid-Tower (PH-EC400ATG_BK01), Mesh Front Panel, Tempered Glass, Fan Controller, Black
Optimal cooling performance with the ultra-fine performance mesh front panel and features a tempered Glass Side panel in a compact Mid-towerSpacious open interior: supports up to *E-ATX motherboard, 280/360mm radiator in front and 240mm on top, vertical GPU mounting support (with PH-VGPUKT_02)Two pr...
28. Noctua NF-A14 iPPC-2000 PWM, Heavy Duty Cooling Fan, 4-Pin, 2000 RPM (140mm, Black)
- Heavy duty cooling fan, 140x140x25 mm, 12V, 4-pin PWM, max. 2000 RPM, max. 31.5 dB(A), >150,000 h MTTF
- Award-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior cooling efficiency
- 12V 2000rpm model (31.5dB) with 4-pin PWM connector for automatic speed control via 4-pin PWM fan headers, broad 500-2000rpm speed range
- High-speed industrialPPC version for industrial heavy-duty applications that require extreme cooling performance and advanced ingress protection
- Ruggedised fibre-glass reinforced polyamide construction and IP52 certified water and dust protection
Features:
29. Phanteks PH-ES518XTG_DBK01 Enthoo Evolv X ATX Case Tempered Glass Windows Digital RGB Black
Strongly enhanced airflow Design. Front I/O support (USB 3. 1 Type-C, 2x USB 3. 0, mic, headphone, LED controlClean interior design. Cable management 2. 0 (cable door covers). smart space utilization for ultimate flexibilityMassive storage capacity (up to 10x HDD and 9x SSD simultaneously). high-end...
30. Phanteks Eclipse P400A Digital ATX Mid-Tower (PH-EC400ATG_DWT01), Mesh Front Panel, Tempered Glass, Digital-RGB, White
Optimal cooling performance with the ultra-fine performance mesh front panel and features a tempered Glass Side panel in a compact Mid-towerSpacious open interior supports up to E-ATX motherboard 280/360mm radiator in front and 240mm on top vertical GPU mounting support (with PH-VGPUKT_02)Integrated...
31. Phanteks PH-CBRS_PR22 – 220mm Premium Shielded High-Speed Technology PCI-E 3.0 x16 Riser Cable, 90o Adapter
- Over 64GB/s via rare shielded twin-axial wires and dedicated power lines for lossless signals at range.
- Flexible sectional design allows for aggressive orientations and better airflow.
- Quality hand soldered gold-plated contacts for signal integrity.
- Individual laneway shielding prevents external EMI/EFI and interference between channels.
- Compatible with Evolve X and Eclipse P600S
Features:
32. Phanteks PH-DRGBLED_COMBO_01 Digital RGB LED Strip Combo Set 2x 400mm 1x M/B adapter ASUS/MSI compatible Retail (Works only with DRGB boards)
- Input : 3 pin female, Compatibility : Phanteks 3 pin connector / M/B 3 pin DRGB Header (+5V,DATA,N/A,GND)
- Connector : Extension: male to female extension cable M/B Adapter: Digital RGB adapter 3pin (+5V,Data,N/A,GND)
- Phanteks Digital RGB LED strip has integrated magnets in the silicone housing allowing for easy installation to the metal chassis. For a really secure fit, our strip includes double-side 3M tape.
- With our 1 orientation connector, you can rest assure that the connectors are in the right position. The Digital RGB strip is also chainable so you can expand the length by adding more light strips.
- The Digital RGB Strips Combo Set comes with a Digital RGB LED adapter that allows the Digital RGB strips to work with motherboards only that features a Digital RGB Pin header (+5V, DATA, NA, GND).
- Phanteks Digital RGB LED strips are extremely bright and is a great addition to any case. The LED are digitally addressable to allow you to control individual LED on the strip with supported software. Works only with DRGB boards
Features:
33. Phanteks Halos 140mm Digital LED Fan Frame, Black (PH-FF140DRGBP_BK01)
- There is no compromise on performance. Even high-quality fans made from PBT material, like Phanteks’ MP and SP fans, can now be illuminated.
- Light is spread evenly thanks to high density Digital LED’s and diffuser.
- Daisy chain all of Phanteks’ Digital RGB products together.
- Sync the Digital RGB LED lighting with any Digital RGB equipped Phanteks digital RGB and motherboard. Compatible with Asus (Aura Sync), MSI (Mystic light).
- The Halos Lux series Digital RGB Fan Frame can be mounted directly to the fan with the included fan screws or mounted to a radiator mounted fan using the UNC 6-32 radiator screws.
Features:
34. DEEPCOOL FH-10 Integrated Fan Hub, Powering up to 10 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Header
If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED.If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only...
35. WS2812B RGB LED Strip Light 30 Pixels/M Digital Programmable, Aclorol WS2812B Individually Addressable 16.4ft 150 5050 RGB SMD Pixels Dream Color Black PCB 5V
- INDIVIDUALLY ADDRESSABLE. You can control each LED individually! Yes, that's right; this is the digitally-addressable type of LED strip. You can set the color of each LED's red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). WS2812B Led strips are work great with FastLED library
- FULL COLORFUL: 256 brightness display and full 24-bit color display. Each 5050 SMD w/ WS2811 build in can have its own color and brightness. You can control each LED Pixel individually and set it to any color or animation you want
- CUTTABLE&CONNECTABLE: This WS2812B Pixel can be cut off without damaging the rest pixels. Each LED strip comes with 3pin JST-SM connectors and can be connected end to end, Maxim base on you controller. So you can DIY for length you want.
- HOW TO GET IT WORK: First, you will need an output is 5V power supply and controller (Both don’t include). Second, Connect Power and Ground from Power Supply. AND Connect Ground and Control (data) wire to whatever you are driving the string ESP8266 or any controller.
- SAFETY & EASY INSTALLATION. Work under DC6V, low voltage for human safety, low power consumption, energy-saving, super-bright but running with low temperature. It comes with self-adhesive 3M tape on its back, so you can fix it on any dry and flat surface without any screws and clips.
Features:
just get a new fan. it's $15 in US. https://www.amazon.com/Phanteks-140mm-Cooling-Fan-PH-F140SP_BK/dp/B00E9NZV4Y?th=1
Yeah, but could you only use the one from them? What about the on from Thermaltake or did Phanteks made the holes so you can only use their?
Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable 200mm AC-053-CN1OTN-C1 https://www.amazon.com/dp/B06Y5YNGDJ/ref=cm_sw_r_cp_apa_o7gYBbPAE5SDM
I found most of their accessories on Amazon.
3.5" HDD tray 2 pack.
Phanteks - Stackable 3.5" HDD Bracket Duo Pack Cases PH-HDDKT_03 https://www.amazon.com/dp/B07GY2B3WP/ref=cm_sw_r_cp_apa_i_9SLFDbRQEC2W8
There is a "SL" part and a "PR" part. The "PR" designates it as their "premium" cable. It has the individual ribbons of insulated cable as opposed to one single ribbon. The screw hole placement looks VERY similar to the Lian Li riser cable they sell for the O11 case.
I kept checking Amazon until it showed it was in-stock, which took about 3-4 days.
https://www.amazon.com/Phanteks-PH-CBRS_PR22-High-Speed-Technology-PCI/dp/B07H7MHHP6/ref=sr_1_2?keywords=phanteks+riser&qid=1551379815&s=gateway&sr=8-2
This is the one I ordered for it.. I won't be able to test until I get my case in a week https://www.amazon.com/gp/product/B00KFCRMSG/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
Here you go.
edit: not in-stock yet tho.
https://www.amazon.com/Phanteks-Upgrade-Capability-Extension-PH-ITXKT_02/dp/B07H7M3SHC/ref=mp_s_a_1_78?ie=UTF8&qid=1538789867&sr=8-78&pi=AC_SX236_SY340_QL65&keywords=phanteks&dpPl=1&dpID=31DeLO0RBEL&ref=plSrch
https://www.amazon.com/CableMod-Vertical-PCI-Bracket-DisplayPort/dp/B07D7NM2P6
https://www.amazon.com/gp/aw/d/B07BHWCGDD/ref=psdcmw_1048424_t1_B00NYVGA7E
It seems they just listed the silver one. The link for the black one is this one. Currently is not listed by Amazon but when I click my order, it takes me there.
Phanteks Eclipse P400A Digital ATX Mid-Tower (PH-EC400ATG_DWT01), Mesh Front Panel, Tempered Glass, Digital-RGB, Whit https://www.amazon.com/dp/B07TTDW37F/ref=cm_sw_r_cp_api_i_xOKuDb91S40J9
I’m not exactly sure supposedly I think it’s early this week
You bought "wrong" strip and wrong halos.
These are standard strips and standard halos, the 12V RGB.
Your EVOLV X case is meant to be used with ADDRESSABLE lighting, so Digital halo this one https://www.amazon.com/Phanteks-Halos-140mm-Digital-PH-FF140DRGBP_BK01/dp/B07BGWLH14
And WS2812B addressable strip like this https://www.amazon.com/Programmable-Aclorol-Individually-Addressable-Raspberry/dp/B07BKNS7DJ
or this (if you want to overpay for Phanteks overpriced strips) https://www.amazon.com/Phanteks-PH-DRGBLED_Combo_01-Digital-Adapter-Compatible/dp/B07C1ZFRWW/
With these, then everything will check out. And you will be able to sync both your case with halo, strip and motherboard.
If you don't want your current purchase to go to waste (or can't return it), you need to purchase this https://www.amazon.com/Phanteks-Adapter-Specified-Control-PH-CB_RGB4P/dp/B01BZIBJAK/ and then you can connect HALO's and strips to your motherboard 4-pin 12V G R B headers but then, they wont sync with case, as case has to be connected separately to ADD_Header (5V data GND).
Check page 22 and 23 of case manual.
No, that’s the complete kit. I was referring to the cable only: https://www.amazon.com/dp/B07H7MHHP6
Well, i found the probem, it is the fucking fan-hub. The white header is kind of defect. I ordered five silent wings 3 140mm and every fan connected to the white header makes stranges noises and spins slower than the other four:
https://youtu.be/sF8T_Ofohr8
I ordered a fan-hub from amazon (deep cool) and now everything works like a charm.
I read that is fan-hub problem is very common on the evolv x, since the release. So did i get an old produced case or is phanteks lazy as shit? Damn, my nerves...
I have the Evolv X and Asus Hero Z390 with 2 x HALO just added and WS2812B strip bought from Amazon but not installed yet.
​
Two questions: