(Part 2) Best products from r/SwitchHacks
We found 25 comments on r/SwitchHacks discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 46 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. ELUTENG M.2 Enclosure for SATA B/B+M Key NGFF External SSD Reader (NOT for NVME) and Writer Superspeed 5Gbps M2 HDD to USB 3.0 Adapter with UASP, Support NGFF M.2 2230 2242 2260 2280
✎ M.2 SSD hard drive enclosure, ONLY support M.2 NGFF SATA SSD B key / B+M key, **NOT Support M key , or any PCIE / Nvme SSD interface. **Please format your new ssd before using it, otherwise, it may not be recognized on PC.✎ USB 3.0 high speed interface, Transmission rate up to 5Gbps, support U...
▼ Read Reddit mentions22. Pace 6993-0082 Master Cir-Kitr Repair Kit for PCBs
- CIR-KIT, MASTER A97
- A simple, low cost solution to damaged circuitry
- A deluxe version of Cir-Kit with a full complement of Trak Pad Frames, Eyelets, Funnelets and additional tools/accessories
- Master Cir-Kit contains the following:
- Eyelet 1347-0016 x 100 pcs
Features:
▼ Read Reddit mentions23. Satisfye - New Grip, Accessories Compatible with Nintendo Switch - Comfortable & Ergonomic Grip, Joy Con & Switch Control. #1 Switch Accessories Designed for Gamers. BONUS: 2 Thumbsticks
OUR NEW ANTI-SCRATCH silicone tabs floating solution keeps your Switch from coming into direct contact with the Switch grip itself and leaves room for warm air to evacuate on the backside, so that your Switch gets the protection it deservesWHILE OTHER GRIPS will leave you fatigued after some time, o...
▼ Read Reddit mentions24. Sabrent 2.5-Inch SATA to USB 3.0 Tool-Free External Hard Drive Enclosure [Optimized for SSD, Support UASP SATA III] Black (EC-UASP)
- Tool free design, easy to install,Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port,Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.
- Suitable for 2.5” SATA/SSD; Supports Standard Notebook 2.5″ SATA and SATA II Hard drives
- Optimized for SSD, Supports UASP SATA III,Backwards-Compatible with USB 2.0 or 1.1
- Hot-swappable, plug and play, no drivers needed
- Operating System: Supported Operating Systems: Mac,Windows;Supported Windows Versions: Windows 7, Windows 8, Windows Vista, Windows XP; Supported Mac Versions: Mac OS X and Higher
Features:
![Sabrent 2.5-Inch SATA to USB 3.0 Tool-Free External Hard Drive Enclosure [Optimized for SSD, Support UASP SATA III] Black (EC-UASP)](https://m.media-amazon.com/images/I/311m+ah4SDL._SL300_.jpg)
▼ Read Reddit mentions25. AUKEY Ground Loop Noise Isolator for Car Stereo Systems and Home Audio Systems, 3.5mm Audio Cable Included
Eliminating Buzzing Noise: Eliminate hiss, buzz, and other background interference caused by ground loop noise. Designed to improve sound quality on car stereo systems and home speaker systems when the audio source is physically connected by 3.5mm audio cableWorking Principle: Filters out noise inst...
▼ Read Reddit mentions26. COCOCKA Micro SD Card Reader, 3-in-1 USB 2.0 Memory Card Reader OTG Adapter for PC/Laptop/Smart Phones/Tablets
[3-in-1 SD Card Reader] The SD Card Reader with a standard USB 2.0 plug, micro USB plug and USB C plug combination, making this card reader compatible with all USB C device, tablets and Android smartphones that support OTG function.[Micro SD Card Converter] Micro sd card reader for data transmission...
▼ Read Reddit mentions27. ZIOCOM Ground Loop Noise Isolator for Car Audio and Home Stereo System with 3.5mm Aux Audio Cable,Black
Eliminating Buzzing Noise : Eliminating the buzzing noise, caused by ground loops which happens when the audio source and the speaker use the same power source in some car speakers / home stereo systems when using the Bluetooth receiver.Working Principle: Filters out noise instantly for clear, unint...
▼ Read Reddit mentions28. Anker PowerCore+ 26800 PD with 30W Power Delivery Charger, Portable Charger Bundle for MacBook Air / iPad Pro 2018, iPhone 11 / 11 Pro / 11 Pro Max / XS / X, S10, and USB C Laptops with Power Delivery
- The Anker Advantage: Join the 50 million+ powered by America's leading USB charging brand.
- Huge Charging Power: high-speed charging for phones, tablets and USB-C notebooks. Boasts 1 USB-C (30W) and 2 USB ports (5V/3a each).
- Colossal capacity: 26800mAh of power charges most phones over 7 times, tablets at least 2 times or notebooks at least once.
- Recharge 3X faster: time for a full recharge is reduced to 4. 5 hours thanks to Power delivery input (27W). Compatible charger included.
- What you get: Power core+ 26800 PD, 30W USB-C wall charger, Micro USB cable, USB-C to USB-C cable (Lightning cable not included), travel pouch, welcome guide, our worry-free 18-month and friendly customer service.
Features:
▼ Read Reddit mentions29. 40 Pieces NFC Sticker NTAG 215 Compatible with Amiibo and TagMo Fully Programmable NTAG215 NFC Tags Circular Stickers Works with Android and All NFC Enabled Devices,Round by Timeskey NFC
- 【Size】The parcel contains 40 NTAG215 labels, Diameter 25mm/1 inch.
- 【Material】 The circular tag is made of environmentally friendly PET material. The surface is smooth and wear -resistant and shiny. The round stickers are adhesive and easy to paste on the surface of most items.
- 【Chip】Genuine NTAG215 chip developed by NXP Semiconductors, 540 bytes of memory, password protected authentication, high scan strength, easy to program. The NXP 215 chip has a read-write lock function, which can be edited repeatedly or read-only. Tags cannot be edited or reset once they are set as read-only. Service life: 10 years, 100,000 erasing and rewriting (making Amiibo can only be written once, not repeatedly erasing and rewriting)
- 【Features】Compatible with Tagmo Amiibo and all NFC-enabled devices (note that some iPhone models can only passively read data, not actively write data, please understand.), you can use them to quickly share your social information, music, connect to WiFi, Build smart homes and more to make your life more colorful.(stickers cannot be used on metal surfaces)
- 【Professional NFC product seller】If you encounter any problems during the shopping process, you can contact us at any time, TimesKey will sincerely serve you. TimesKey offers many exclusive and popular labels for NFC tags for you to choose, TimesKey welcomes bulk order or customization, please contact us if you need it.
Features:
▼ Read Reddit mentions30. SanDisk 256GB Ultra microSDXC UHS-I Memory Card with Adapter - 100MB/s, C10, U1, Full HD, A1, Micro SD Card - SDSQUAR-256G-GN6MA
- Ideal for Android Smartphones and Tablets, and MIL Cameras
- Capacities up to 512GB (1GB=1,000,000,000 bytes; Actual user storage less) to store even more hours of Full HD video (Approximations; Results and Full HD (1920x1080) video support may vary based on host device, file attributes and other factors)
- Up to 100MB/s transfer read speed (Based on internal testing; Performance may be lower depending on host device, interface, usage conditions and other factors) lets you move up to 1000 photos in a minute (Based on 4.1GB transfer of photos (Average file 3.5MB) with USB 3.0 reader; Results may vary based on host device, file attributes and other factors)
- Load apps faster with A1 rated performance (A1 Performance is 1500 read IOPS, 500 write IOPS; Based on internal testing; Results may vary based on host device, app type and other factors)
- Class 10 for Full HD video recording and playback (Full HD (1920x1080) video support may vary based upon host device, file attributes, and other factors)
Features:
▼ Read Reddit mentions31. SanDisk 32GB Extreme microSDHC UHS-I Memory Card with Adapter - C10, U3, V30, 4K, A1, Micro SD - SDSQXAF-032G-GN6MA
- Ideal for 4K UHD and Full HD video2
- Transfer speeds of up to 100MB/s
- Rescue PRO Deluxe data recovery software
- SanDisk Memory Zone app for easy file management
- Shock-, temperature-, water-, and X-ray-proof
Features:
▼ Read Reddit mentions32. AmazonBasics USB Type-C to Micro-B 2.0 Short Charger Cable - 6 Inches (15.2 Centimeters) - Black
- Connect a computer with a Type-C USB port (MacBook, Chromebook Pixel, Galaxy Note 7, etc.) to a Micro-B USB 2.0 enabled device
- Offers reliable connectivity for easy charging or syncing of a tablet, smartphone, digital camera, or legacy USB peripheral device with Micro USB
- Reversible design - easily insert the Type-C connector into any Type-C enabled device (does not matter which side is up)
- Type-C port is half the width and one-third the height of a standard USB-A connector (slightly larger compared to Lightning or Micro-USB ports)
- Up to 480 Mbps data transfer speed; power output up to 5V, 3 Amp
- Certified by USB-IF to be compliant with USB 2.0 Standard; backed by an Amazon Basics 1-Year Limited Warranty
Features:
▼ Read Reddit mentions33. Samsung Evo Plus 32GB MicroSD HC Class 10 UHS-1 Mobile Memory Card for Samsung Galaxy S7 & S7 Edge with USB 2.0 MemoryMarket Dual Slot MicroSD & SD Memory Card Reader
Samsung Evo Plus 32GB MicroSD HC Class 10 UHS-1 Mobile Memory Card1 year factory warrantySpeed: UHS-1 Class 10 Memory Card with read speed up to 80mb/sMemoryMarket Dual Slot MicroSD and SD USB 2.0 Memory Card Reader (reads up to 200GB)Listing includes: 1x Memory Card, 1x Adapter, 1x Card Reader
▼ Read Reddit mentions34. [2 in 1 Pack] Anker USB-C (Male) to Micro USB (Female) Adapter, Allows Micro USB to USB-C Data Transfer, Uses 56K Resistor, Works with Galaxy S9, MacBook, iPad Pro, LG V20 and More
- Country of Origin: CHINA
- Package Weight: 0.02 kilograms
- Compatible devices: google nexus 5x
- Allows Micro USB to USB-C Data Transfer
Features:
![[2 in 1 Pack] Anker USB-C (Male) to Micro USB (Female) Adapter, Allows Micro USB to USB-C Data Transfer, Uses 56K Resistor, Works with Galaxy S9, MacBook, iPad Pro, LG V20 and More](https://m.media-amazon.com/images/I/31aJo9nDxHL._SL300_.jpg)
▼ Read Reddit mentions35. CableCreation Micro USB 2.0 OTG Cable Flat On The Go Adapter Micro USB Male to USB Female for Samsung S7 S6 Edge S4 S3 Android or Other Smart Phones Tablets with OTG Function 6 Inch, Black
- Short On-The-Go (OTG) micro USB cable enables Android or Windows micro usb phones and tablets to work as a host for connection with USB peripherals such as DJI Spark, Mavic RC,keyboards, mice, flash drives, external hard drives, USB card readers, game controllers and more. **Please make sure that your phone/tablet supports OTG**
- Versatile OTG cable is for watching movies, viewing pictures,listening to music and transferring files by connecting a flash driver or camera; expanding storage from a flash drive,TF card or external hard drive; editing files and documents with keyboard and mouse; playing games by connecting a game controller such as PS4; connecting an android device as a flight display for DJ I Mavic and spark drones;emergency charge from a phone/tablet to another phone/tablet, Bluetooth earphone,camera,etc.
- Plug and play. Powered by micro USB port, No external power supply required.
- Premium USB OTG adapter engineered with molded strain relief connectors for durability and grip treads for easy plugging and unplugging.
- CableCreation provides item with 2-years warranty and lifetime technical support.
Features:
▼ Read Reddit mentions36. Charging Dock Stand for Nintendo Switch KINGTOP Joy-Con Controllers Charger Station with Individual LEDs Indicator and Type C Charging Cable
Joy-Con charging dock--Best solution for charging your Nintendo Switch Joy-Con Controllers and keeping track of themTime-efficient charging--Fast Charges all 4 controllers in about 3.5 hours,never worry about your joycons not being charged,you’re always get ready to playClear Led Indicators--indiv...
▼ Read Reddit mentions37. Nyko Kick Stand Multi-Pak - 3 Various Color Replacement Kickstands with Built-In SD Card Storage for Nintendo Switch
- Kick Stand Multi Pak includes 3 different color options (purple, clear and black)
- Easy installation
- Store an additional Micro-SD card inside the kick stand
Features:
▼ Read Reddit mentions38. BASSTOP DIY Replacement Housing Shell Case Set for Switch NS NX Console and Right Left Switch Joy-Con Controller Without Electronics (White Set)
- Specially designed DIY Replacement Housing Shell Case Set for Switch NS NX Console and Right Left Switch Joy-Con Controller (no electronics part included)
- Precise cutout and 100% original size, you can DIY your personalized switch NS NX Console and Right Left Switch Joy-Con Controller with this case set
- Easy to install: Just take out the original Switch NS NX Console case and Right Left Switch Joy-Con Controller case, then install this replacement case set(screw drivers and screws are not included, you can use the original Nintendo switch tools to finish this installation).
- You can have a lot of fun by DIY your personalized Nintendo switch NS NX Console and Right Left Switch Joy-Con Controller with this anti-scratch replacement case
- What you get: replacement case set for Switch NS NX Console and Right Left Switch Joy-Con Controller, 12 Month 100% Satisfaction Guarantee and 24 Hour dedicated email support.
Features:
▼ Read Reddit mentions39. ICESPRING Phone Clip Holder Clamp Mount Stand Bracket for Playstation 4 Slim Pro PS4 Wireless Controller
- PS4 Game holder controller for your Android mobile phone. Real gaming experience solution
- Adjustable angle range from 0 to 270 degree. You can easily adjust the PS4 Phone Clamp to the most comfortable position to you
- 2 in 1 holder: With an OTG cable you can enjoy your game with PS4 controller and it can be a smart mount itself.
- PS3 Phone Holder is flexible enough to easily snap onto your PS4 controller, but strong enough to provide a solid mounting platform for your phone
- This PS4 Phone Mount fits phones with maximum width 3.4” (88mm). This PS4 Phone Clip Comes with data cable. Simply clip, plug and play, Compatible for Android phone, such as Samsung Galaxy Note, HTC, Sony Xperia etc
Features:
▼ Read Reddit mentions40. Nyko Clip Grip Power - Joy-Con Grip with Cell Phone Mount, rechargeable battery pack, game storage and SD Card holder for Nintendo Switch
- Attach the Joy-Cons to Clip Grip Power for added comfort
- Easily attach most smart phones
- Ideal way to interact with the Nintendo Switch online app
- Store up to 7 Nintendo Switch games and 2 Micro-SD cards
- Internal battery provides extra play time for Joy-Cons, smart phone or Nintendo Switch
Features:
▼ Read Reddit mentionsTop comments mentioning products on r/SwitchHacks:
Summary
21. ELUTENG M.2 Enclosure for SATA B/B+M Key NGFF External SSD Reader (NOT for NVME) and Writer Superspeed 5Gbps M2 HDD to USB 3.0 Adapter with UASP, Support NGFF M.2 2230 2242 2260 2280
✎ M.2 SSD hard drive enclosure, ONLY support M.2 NGFF SATA SSD B key / B+M key, **NOT Support M key , or any PCIE / Nvme SSD interface. **Please format your new ssd before using it, otherwise, it may not be recognized on PC.✎ USB 3.0 high speed interface, Transmission rate up to 5Gbps, support U...
▼ Read Reddit mentions22. Pace 6993-0082 Master Cir-Kitr Repair Kit for PCBs
- CIR-KIT, MASTER A97
- A simple, low cost solution to damaged circuitry
- A deluxe version of Cir-Kit with a full complement of Trak Pad Frames, Eyelets, Funnelets and additional tools/accessories
- Master Cir-Kit contains the following:
- Eyelet 1347-0016 x 100 pcs
Features:
▼ Read Reddit mentions23. Satisfye - New Grip, Accessories Compatible with Nintendo Switch - Comfortable & Ergonomic Grip, Joy Con & Switch Control. #1 Switch Accessories Designed for Gamers. BONUS: 2 Thumbsticks
OUR NEW ANTI-SCRATCH silicone tabs floating solution keeps your Switch from coming into direct contact with the Switch grip itself and leaves room for warm air to evacuate on the backside, so that your Switch gets the protection it deservesWHILE OTHER GRIPS will leave you fatigued after some time, o...
▼ Read Reddit mentions24. Sabrent 2.5-Inch SATA to USB 3.0 Tool-Free External Hard Drive Enclosure [Optimized for SSD, Support UASP SATA III] Black (EC-UASP)
- Tool free design, easy to install,Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port,Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.
- Suitable for 2.5” SATA/SSD; Supports Standard Notebook 2.5″ SATA and SATA II Hard drives
- Optimized for SSD, Supports UASP SATA III,Backwards-Compatible with USB 2.0 or 1.1
- Hot-swappable, plug and play, no drivers needed
- Operating System: Supported Operating Systems: Mac,Windows;Supported Windows Versions: Windows 7, Windows 8, Windows Vista, Windows XP; Supported Mac Versions: Mac OS X and Higher
Features:
▼ Read Reddit mentions25. AUKEY Ground Loop Noise Isolator for Car Stereo Systems and Home Audio Systems, 3.5mm Audio Cable Included
Eliminating Buzzing Noise: Eliminate hiss, buzz, and other background interference caused by ground loop noise. Designed to improve sound quality on car stereo systems and home speaker systems when the audio source is physically connected by 3.5mm audio cableWorking Principle: Filters out noise inst...
▼ Read Reddit mentions26. COCOCKA Micro SD Card Reader, 3-in-1 USB 2.0 Memory Card Reader OTG Adapter for PC/Laptop/Smart Phones/Tablets
[3-in-1 SD Card Reader] The SD Card Reader with a standard USB 2.0 plug, micro USB plug and USB C plug combination, making this card reader compatible with all USB C device, tablets and Android smartphones that support OTG function.[Micro SD Card Converter] Micro sd card reader for data transmission...
▼ Read Reddit mentions27. ZIOCOM Ground Loop Noise Isolator for Car Audio and Home Stereo System with 3.5mm Aux Audio Cable,Black
Eliminating Buzzing Noise : Eliminating the buzzing noise, caused by ground loops which happens when the audio source and the speaker use the same power source in some car speakers / home stereo systems when using the Bluetooth receiver.Working Principle: Filters out noise instantly for clear, unint...
▼ Read Reddit mentions28. Anker PowerCore+ 26800 PD with 30W Power Delivery Charger, Portable Charger Bundle for MacBook Air / iPad Pro 2018, iPhone 11 / 11 Pro / 11 Pro Max / XS / X, S10, and USB C Laptops with Power Delivery
- The Anker Advantage: Join the 50 million+ powered by America's leading USB charging brand.
- Huge Charging Power: high-speed charging for phones, tablets and USB-C notebooks. Boasts 1 USB-C (30W) and 2 USB ports (5V/3a each).
- Colossal capacity: 26800mAh of power charges most phones over 7 times, tablets at least 2 times or notebooks at least once.
- Recharge 3X faster: time for a full recharge is reduced to 4. 5 hours thanks to Power delivery input (27W). Compatible charger included.
- What you get: Power core+ 26800 PD, 30W USB-C wall charger, Micro USB cable, USB-C to USB-C cable (Lightning cable not included), travel pouch, welcome guide, our worry-free 18-month and friendly customer service.
Features:
▼ Read Reddit mentions29. 40 Pieces NFC Sticker NTAG 215 Compatible with Amiibo and TagMo Fully Programmable NTAG215 NFC Tags Circular Stickers Works with Android and All NFC Enabled Devices,Round by Timeskey NFC
- 【Size】The parcel contains 40 NTAG215 labels, Diameter 25mm/1 inch.
- 【Material】 The circular tag is made of environmentally friendly PET material. The surface is smooth and wear -resistant and shiny. The round stickers are adhesive and easy to paste on the surface of most items.
- 【Chip】Genuine NTAG215 chip developed by NXP Semiconductors, 540 bytes of memory, password protected authentication, high scan strength, easy to program. The NXP 215 chip has a read-write lock function, which can be edited repeatedly or read-only. Tags cannot be edited or reset once they are set as read-only. Service life: 10 years, 100,000 erasing and rewriting (making Amiibo can only be written once, not repeatedly erasing and rewriting)
- 【Features】Compatible with Tagmo Amiibo and all NFC-enabled devices (note that some iPhone models can only passively read data, not actively write data, please understand.), you can use them to quickly share your social information, music, connect to WiFi, Build smart homes and more to make your life more colorful.(stickers cannot be used on metal surfaces)
- 【Professional NFC product seller】If you encounter any problems during the shopping process, you can contact us at any time, TimesKey will sincerely serve you. TimesKey offers many exclusive and popular labels for NFC tags for you to choose, TimesKey welcomes bulk order or customization, please contact us if you need it.
Features:
▼ Read Reddit mentions30. SanDisk 256GB Ultra microSDXC UHS-I Memory Card with Adapter - 100MB/s, C10, U1, Full HD, A1, Micro SD Card - SDSQUAR-256G-GN6MA
- Ideal for Android Smartphones and Tablets, and MIL Cameras
- Capacities up to 512GB (1GB=1,000,000,000 bytes; Actual user storage less) to store even more hours of Full HD video (Approximations; Results and Full HD (1920x1080) video support may vary based on host device, file attributes and other factors)
- Up to 100MB/s transfer read speed (Based on internal testing; Performance may be lower depending on host device, interface, usage conditions and other factors) lets you move up to 1000 photos in a minute (Based on 4.1GB transfer of photos (Average file 3.5MB) with USB 3.0 reader; Results may vary based on host device, file attributes and other factors)
- Load apps faster with A1 rated performance (A1 Performance is 1500 read IOPS, 500 write IOPS; Based on internal testing; Results may vary based on host device, app type and other factors)
- Class 10 for Full HD video recording and playback (Full HD (1920x1080) video support may vary based upon host device, file attributes, and other factors)
Features:
▼ Read Reddit mentions31. SanDisk 32GB Extreme microSDHC UHS-I Memory Card with Adapter - C10, U3, V30, 4K, A1, Micro SD - SDSQXAF-032G-GN6MA
- Ideal for 4K UHD and Full HD video2
- Transfer speeds of up to 100MB/s
- Rescue PRO Deluxe data recovery software
- SanDisk Memory Zone app for easy file management
- Shock-, temperature-, water-, and X-ray-proof
Features:
▼ Read Reddit mentions32. AmazonBasics USB Type-C to Micro-B 2.0 Short Charger Cable - 6 Inches (15.2 Centimeters) - Black
- Connect a computer with a Type-C USB port (MacBook, Chromebook Pixel, Galaxy Note 7, etc.) to a Micro-B USB 2.0 enabled device
- Offers reliable connectivity for easy charging or syncing of a tablet, smartphone, digital camera, or legacy USB peripheral device with Micro USB
- Reversible design - easily insert the Type-C connector into any Type-C enabled device (does not matter which side is up)
- Type-C port is half the width and one-third the height of a standard USB-A connector (slightly larger compared to Lightning or Micro-USB ports)
- Up to 480 Mbps data transfer speed; power output up to 5V, 3 Amp
- Certified by USB-IF to be compliant with USB 2.0 Standard; backed by an Amazon Basics 1-Year Limited Warranty
Features:
▼ Read Reddit mentions33. Samsung Evo Plus 32GB MicroSD HC Class 10 UHS-1 Mobile Memory Card for Samsung Galaxy S7 & S7 Edge with USB 2.0 MemoryMarket Dual Slot MicroSD & SD Memory Card Reader
Samsung Evo Plus 32GB MicroSD HC Class 10 UHS-1 Mobile Memory Card1 year factory warrantySpeed: UHS-1 Class 10 Memory Card with read speed up to 80mb/sMemoryMarket Dual Slot MicroSD and SD USB 2.0 Memory Card Reader (reads up to 200GB)Listing includes: 1x Memory Card, 1x Adapter, 1x Card Reader
▼ Read Reddit mentions34. [2 in 1 Pack] Anker USB-C (Male) to Micro USB (Female) Adapter, Allows Micro USB to USB-C Data Transfer, Uses 56K Resistor, Works with Galaxy S9, MacBook, iPad Pro, LG V20 and More
- Country of Origin: CHINA
- Package Weight: 0.02 kilograms
- Compatible devices: google nexus 5x
- Allows Micro USB to USB-C Data Transfer
Features:
▼ Read Reddit mentions35. CableCreation Micro USB 2.0 OTG Cable Flat On The Go Adapter Micro USB Male to USB Female for Samsung S7 S6 Edge S4 S3 Android or Other Smart Phones Tablets with OTG Function 6 Inch, Black
- Short On-The-Go (OTG) micro USB cable enables Android or Windows micro usb phones and tablets to work as a host for connection with USB peripherals such as DJI Spark, Mavic RC,keyboards, mice, flash drives, external hard drives, USB card readers, game controllers and more. **Please make sure that your phone/tablet supports OTG**
- Versatile OTG cable is for watching movies, viewing pictures,listening to music and transferring files by connecting a flash driver or camera; expanding storage from a flash drive,TF card or external hard drive; editing files and documents with keyboard and mouse; playing games by connecting a game controller such as PS4; connecting an android device as a flight display for DJ I Mavic and spark drones;emergency charge from a phone/tablet to another phone/tablet, Bluetooth earphone,camera,etc.
- Plug and play. Powered by micro USB port, No external power supply required.
- Premium USB OTG adapter engineered with molded strain relief connectors for durability and grip treads for easy plugging and unplugging.
- CableCreation provides item with 2-years warranty and lifetime technical support.
Features:
▼ Read Reddit mentions36. Charging Dock Stand for Nintendo Switch KINGTOP Joy-Con Controllers Charger Station with Individual LEDs Indicator and Type C Charging Cable
Joy-Con charging dock--Best solution for charging your Nintendo Switch Joy-Con Controllers and keeping track of themTime-efficient charging--Fast Charges all 4 controllers in about 3.5 hours,never worry about your joycons not being charged,you’re always get ready to playClear Led Indicators--indiv...
▼ Read Reddit mentions37. Nyko Kick Stand Multi-Pak - 3 Various Color Replacement Kickstands with Built-In SD Card Storage for Nintendo Switch
- Kick Stand Multi Pak includes 3 different color options (purple, clear and black)
- Easy installation
- Store an additional Micro-SD card inside the kick stand
Features:
▼ Read Reddit mentions38. BASSTOP DIY Replacement Housing Shell Case Set for Switch NS NX Console and Right Left Switch Joy-Con Controller Without Electronics (White Set)
- Specially designed DIY Replacement Housing Shell Case Set for Switch NS NX Console and Right Left Switch Joy-Con Controller (no electronics part included)
- Precise cutout and 100% original size, you can DIY your personalized switch NS NX Console and Right Left Switch Joy-Con Controller with this case set
- Easy to install: Just take out the original Switch NS NX Console case and Right Left Switch Joy-Con Controller case, then install this replacement case set(screw drivers and screws are not included, you can use the original Nintendo switch tools to finish this installation).
- You can have a lot of fun by DIY your personalized Nintendo switch NS NX Console and Right Left Switch Joy-Con Controller with this anti-scratch replacement case
- What you get: replacement case set for Switch NS NX Console and Right Left Switch Joy-Con Controller, 12 Month 100% Satisfaction Guarantee and 24 Hour dedicated email support.
Features:
▼ Read Reddit mentions39. ICESPRING Phone Clip Holder Clamp Mount Stand Bracket for Playstation 4 Slim Pro PS4 Wireless Controller
- PS4 Game holder controller for your Android mobile phone. Real gaming experience solution
- Adjustable angle range from 0 to 270 degree. You can easily adjust the PS4 Phone Clamp to the most comfortable position to you
- 2 in 1 holder: With an OTG cable you can enjoy your game with PS4 controller and it can be a smart mount itself.
- PS3 Phone Holder is flexible enough to easily snap onto your PS4 controller, but strong enough to provide a solid mounting platform for your phone
- This PS4 Phone Mount fits phones with maximum width 3.4” (88mm). This PS4 Phone Clip Comes with data cable. Simply clip, plug and play, Compatible for Android phone, such as Samsung Galaxy Note, HTC, Sony Xperia etc
Features:
▼ Read Reddit mentions40. Nyko Clip Grip Power - Joy-Con Grip with Cell Phone Mount, rechargeable battery pack, game storage and SD Card holder for Nintendo Switch
- Attach the Joy-Cons to Clip Grip Power for added comfort
- Easily attach most smart phones
- Ideal way to interact with the Nintendo Switch online app
- Store up to 7 Nintendo Switch games and 2 Micro-SD cards
- Internal battery provides extra play time for Joy-Cons, smart phone or Nintendo Switch
Features:
▼ Read Reddit mentions
Normally somebody would use one of These. The pad would be glued in place using a special heat curing paste. Then, the conformal coating of the trace leading up to the pad needs to be scratched away with a very thin needle. From there, you can solder the two pieces together.
The other option is to follow a trace to the next component, and then solder a wire to both the component and the connector. But you'd also need to glue the connector down for normal use.
Yes, mine had a case. Here you go:
https://www.amazon.com/ELUTENG-Enclosure-External-Superspeed-Compatible/dp/B07H95GRSQ
Looks like they sell it on Amazon now
Here is the hdd enclosure I use
Sabrent 2.5-Inch SATA to USB 3.0 Tool-free External Hard Drive Enclosure [Optimized For SSD, Support UASP SATA III] Black (EC-UASP)
I have one from [Aukey] (https://www.amazon.com/AUKEY-Ground-Isolator-Systems-Included/dp/B01L1NP7YI)
Edit: apparently the 14.50 dollar isolator from Kript is better at handling bass according to the top review, but it's also more expensive.
This one works fine for me: https://www.amazon.de/gp/product/B019FC6ZQQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
And here's the one the other guy mentioned:
https://www.amazon.de/dp/B01LX0H29W/ref=cm_sw_r_tw_dp_U_x_opB0CbHJXRZGH
Well some thing like this work for a switch https://www.amazon.com/dp/B07F6T9KHW/ref=cm_sw_r_cp_tai_yP4nDb5TV883C
It’s a ubs c to sd card
My microsd reader broke
With my own personal use case, I like this thing https://www.amazon.com/gp/product/B01MZ61PRW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 - Its an external USB C battery pack, but it doesn't add much weight to a backpack / bag if you'll be carrying one of those around. I mostly use mine for travel.
I just bought some super cheap NFC tags on Amazon. I think the only catch is only some Androids can program it. Maybe the ActionReplay thing too I guess. https://www.amazon.com/Nintendo-Programmable-Circular-Devices-40pcs-TimesKey/dp/B075CKHH8R
its one of those, bought in store
https://www.amazon.co.uk/SanDisk-Extreme-microSDHC-Adapter-Performance/dp/B06XWMQ81P
Has anyone gotten a MicroUSB to USBC adapter to work with the Switch for Goldleaf/Payload Injector via TegraRCM?
It does charge the device when plugged into the PC, but the PC does not detect it.
https://www.amazon.com/Anker-Adapter-Transfer-Resistor-MacBook/dp/B01AHKYIRS/ref=sr_1_7?s=electronics&ie=UTF8&qid=1550641019&sr=1-7&keywords=micro+to+usb+c
There's also these Nyko kickstands with a built in micro sd slot.
https://www.amazon.com/Nyko-Kick-Stand-Multi-Pak-Replacement-Built/dp/B07DNRFKN7
Nyko has this plastic replacement coming out at the end of the month: Nyko Kick Stand Multi Pak - Nintendo Switch https://www.amazon.com/dp/B07DNRFKN7/ref=cm_sw_r_cp_apa_GDxVBbG9AHDKE. They already have a metal version but it's known to dig into the switch's plastic.
The .NSP install time for the U1 card seems extremely long. RE Revelations 2's file size is 26gb.
In my experience, it typically only takes 15 to 20 minutes to install that size of NSPs, when writing to from my U1 microSD card to itself. Your 53+ minutes experience is much much longer than typical, at least compared to my U1 256gb Sandisk card (link).
What are you using to install NSPs? Tinfoil?
A cable you obtain when you purchase this
You can actually get the full set slightly cheaper on amazon.
I use this controller to hold my multiple cards and games. https://www.amazon.com/Nyko-Clip-Grip-Power-Nintendo-Switch/dp/B072KHSYDD
https://www.amazon.com/Wireless-Controller-Holder-Bracket-Playstation/dp/B01MQ0BGOL/ref=mp_s_a_1_3?keywords=ps4+phone+mount&qid=1564324505&s=gateway&sprefix=ps4+phone+&sr=8-3
You've got options.
You can hook up an OTG cable to your phone and connect the controller to your phone through that!
https://www.amazon.com/AmazonBasics-USB-Type-C-Micro-B-Cable/dp/B01LONQ7R6/
I'm personally using this. Anything labeled UHS-1 is gonna be the fastest card the Switch is compatible with.
https://www.amazon.com/gp/product/B01DAYHMAS/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1