(Part 2) Best products from r/airsoftmarket
We found 21 comments on r/airsoftmarket discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 85 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
21. Camouflage Tactical Vest Airsoft Ammo Chest Rig 5.56 9mm Magazine Carrier Combat Tactical Military
High quality of 500D Nylon, lightweight and durablePadded cross-back shoulder strap with webbing, the strap is adjustable from 40-69cm/15.7-27inch, one size fits mostCome with 1*recycle pouch, 3*5.56 mg pouch , 3*9mm mag pouch , 2*mag pouch support frameAllows you use it with the tactical backpack o...
22. UTG 3X Magnifier with Flip-to-side QD Mount, W/E Adjustable
Broadband Multi-coated Lens to Provide Crystal Clear 3X Image, Wide Field of View - 30% Bigger Than Comparable Models from Other Brands.Compatible Rail-Picatinny/Weaver.Windage/Elevation Adjustability for Optimum View Centering. Refer user manual for list of compatible manuals42mm Center Height for ...
23. Rothco 550lb. Type III Nylon Paracord
Commercial paracord ideal for utility use7-strand core made to 550-pound test100-percent nylon constructionMade by certified US Government contractorMeasures 5/32 inches in diameter
24. High Speed Gear Single Rifle Taco Pouch | Universal Rifle Magazine Holster | Rapid Response and MOLLE Compatible (Multicam, Two Pack)
- RAPID RESPONSE – For quick and decisive actions, there is no product better than the High Speed Gear TACO line. Without using loud and obnoxious velcro straps, the TACO pouches securely holds your magazine or hardware in place, and is fully adjustable to fit a variety of magazines or tools. With no extra tabs to pull or remove, your reload actions are faster and simplified.
- UNIVERSAL – The HSG Rifle TACO is designed to hold almost any rifle magazine. From an M4 style to an AK style, the nylon exterior with bungee allows the pouch to stretch if necessary. Ultra durable polymer clips can be tightened with the bungee cord to create a tight fit, keeping your mag in position for faster reloads.
- MULTI-FUNCTION – Capable of holding more than just rifle magazines, the HSG Rifle Taco can also hold a variety of radios, flashbangs, smoke grenades and more. Adjustable tension allows you to securely hold your accessories of choice, while maintaining the rapid response ability High Speed Gear products are known for.
- MODULAR DESIGN – Capable of being mounted onto a duty belt, shooters belt, or MOLLE systems, the rifle TACO easily fits into your tactical loadout. Proprietary MOLLE clips make for easy addition to a tactical vest or belt, and also functions as a belt loop if necessary. At only 3” H x 1.2”W x 5”L, a single rifle taco easily fits on most setups.
- MADE IN USA – Every High Speed Gear product is 100% made in the USA, and is backed by a lifetime warranty. Made with the highest quality materials and with a rigorous testing process, every High Speed Gear product is meant to outperform and outlast any competitor product.
Features:
25. AIM Sports M-14/M1A Scope Mount, Small, Black
Finish is black anodized aircraft grade aluminumside scope mount/weaverN.W. (OZ): 10.9Feature is accepts all weaver standard rings
26. beileshi 2x42 Green & Red Dot Scope Reticle Scope with Red Laser
- 2x magnification, 2.5 MOA Dot reticle designed for quick acquisition
- Flip-up lens caps, optical-quality, all-weather, rheostat for brightness control
- Lightweight / easy to mount, multi-coated lenses, 20mm Weaver Mount Base
- Ideal for shotguns, handguns, rifles, muzzleloaders, paintball and crossbows, black finish
- Waterproof , fog-proof. unlimited eye relief, wide field of view, lifetime limited warranty
Features:
27. Sig P226 Holsters, OWB Holsters for Sig Sauer P220 P226 Full Size 4.4'' Barrel, Tactical Outside The Waistband Belt Carry with 360°Adjustable Polymer Paddle-RH
OWB Holster: Only fit Sig Sauer p226 full size nitron/tacops/mk25, p226 emperor scorpion, legion/nitron p220 full size, Right Handed Draw.Paddle Holster: Paddle design securely slides on to pants or belt, and easy to take it off. Fully adjustable and 360 rotations cant for all application so you can...
28. 400mAh 2S 7.4V 30C LiPo Battery Pack with JST Plug for Micro FPV Racing Drone Quadcopter
This 2S 400mAh Lipo battery weighs about 22g with small size of 1.5 * 0.75 * 0.75 inchesCompatible for: Specially designed for Micro FPV Racing Drone Quadcopter like EMAX BabyHawk mantis 85 DM007The connector of Crazepony 400mAh 2S battery is JST, so you can connect it your micro FPV racing drone qu...
29. 3V Gear Ranger Padded Double Gun Case - 36 Inches
- Rugged 600D PVC polyester construction; Water resistant
- Detachable backpack straps; EVA foam padded sides and internal center divider
- Front Velcro ID panel; Weapons are secured via internal Velcro keeper straps
- Large zippered front compartment (24" x 10" x 2") with two padded pistol pockets; Exterior: 3 pockets for ammo and range gear
- Exterior: 3 pockets for ammo and range gear; Exterior pocket measurements: two pouches; (9" x 5" x 2") and single (9" x 7" x 2"); Overall measurements w/external: 36"L x 12"H x 8"D
Features:
30. SKYRC iMAX B6 Mini Professional Balance Charger/Discharger for Nimh/Li-po Batteries RC Model AC/DC 15V 4A Battery Charger Power Supply Adapter (US Plug)
- Genuine, Authentic, Original iMax B6AC V2 Charger by SkyRC w/ Anti-Fake Holographic Serial Number on the back of the charger. This number can be inputted into SkyRC's website to prove its authenticity.
- LITHIUM BATTERY METER: Plug your LiPo/LiIon/ LiFe balance plug into the charger and use the battery meter as a voltage tester to quickly see the voltage readings from each cell.
- INTERNAL RESISTANCE METER: Use this function to measure the resistance in each of your lithium battery's cells. This helps determine the health of your cells, to be sure you are getting the most power out of them.
- TERMINAL VOLTAGE CONTROL: The voltage at which the charger cuts off the charge to each cell can be adjusted. LiPo 4.18V-4.25V (Default 4.20V) / LiIo 4.08V-4.20V (Default 4.10V) / LiFe 3.58V-3.70V (Default 3.60V)
- PC CONNECTIVITY & UPGRADABLE FIRMWARE: Control your charger and update it with new firmware via the built in USB port. The software (PC Only) can be downloaded from SKYRC's website for free.
Features:
31. ACETECH AC6000 Airsoft Gun Speed Tester BBS Chronograph
- AC6000 is an airsoft chronograph with high quality and accuracy.
- User-friendly interface with 128*128 pixel OLED in white color
- Easier to control: Equipped with 4-way push button
- More durable: IR sensor self-calibration as well as IR sensor calibration in production
- Friendly UI: Enables user directly select and change ammo parameters in main screen
Features:
32. Soft Air Swiss Arms Tactical Airsoft Vest
- Tactical vest for storing SoftAir shooting essentials
- Multiple pockets hold all types of shooting accessories
- Extremely durable construction holds up to heavy use
- Adjustable straps deliver secure, comfortable fit
Features:
33. Tenergy B450AC 45W AC/DC Compact Balance Charger for NiMH NiCd LiPo Li-ion LiFePO4 Lead Acid Battery Packs
- Support Multiple Battery Types NiMH/NiCd: 1-10 cells in series; LiPo/Li-ion/LiFePO4: 1-4 cells in series; SLA: 2-12V
- Adjustable charging current Charging current can be adjusted between 0.1 and 4.5A
- Easy-To-Read LCD Display B450AC’s LCD display is capable of displaying your battery’s real-time charging status, such as charging current, charging voltage and timer
- Displaying Cell Voltage For lithium-based battery packs, B450AC is capable of displaying individual cell voltage
- Dual AC & DC Power Inputs Dual AC & DC power inputs give you the flexibility to charge your battery indoors or on the go.
Features:
34. Valken Airsoft Battery - LiPo 7.4v 1300mAh 30c Split Style(Dean)
- Dimension: 130 x 21x 12mm
- Valken Energy LiPo 7.4v
- 7.4v LiPo 1300mAh
- (Female Dean)
Features:
35. TacMark QTY 3 Rails KeyMod Picatinny Accessory Set
- TacMark product -
- QTY 3 Rails KeyMod Picatinny Accessory Rail Set
- 1x 4.5" 8 Slots, 2x 3.35" 5-slot
- KeyMod Picatinny Accessory rail, mounts onto KeyMod Spec. handguards.
- Black Anodized Aluminum Construction
Features:
36. AIRSOFTPEAK 2 Pack, 5-Slot 2" Keymod Rail Section Picatinny Rail for Key Mod Handguard Mount Rail System
- Short Length Picatinny rail, 7 slots or 3 inches long, for use with standard Keymod rail systems
- Picatinny 1913 rail accepts standard Picatinny accessories
- Rail installs quickly to any universal Keymod platform, allowing for fast modular attachment of grips, bipods, sights, or other accessories
- Package includes all necessary screws and locking nuts, as well as a hex wrench. No additional tooling necessary for installation
- Available in Black or in Flat Dark Earth
Features:
37. GVN Keymod Picatinny Rail Section 4 Inch/9 Slot Picatinny/Weaver Rail (2 Pieces Matte black)
- Quality Built with lightweight aerospace grade aluminum alloy with durable black matte finish
- Perfect for attaching your 1913 picatinny lights, bipods, forward grips, sights, or other accessories
- Mil-spec 9-slot picatinny rail section fully compatible with any key mod handguard mougntin sytstem system
- The rail have the protrusions that lock into the Key Mod holes. Solidly attached using the keymod rail interface, for rifles, shotguns paintball & airsoft
- Package includes all necessary screws and locking nuts, as well as a L hex key for easy installation
Features:
38. Monstrum Tactical 7 Slot/3 inch Picatinny Rail for Keymod Systems (Black)
- Short Length Picatinny rail, 7 slots or 3 inches long, for use with standard Keymod rail systems
- Picatinny 1913 rail accepts standard Picatinny accessories
- Rail installs quickly to any universal Keymod platform, allowing for fast modular attachment of grips, bipods, sights, or other accessories
- Package includes all necessary screws and locking nuts, as well as a hex wrench. No additional tooling necessary for installation
- Available in Black or in Flat Dark Earth
Features:
39. MAPLON 1x30 True Fiber Optic Green Dot Sight Sighting
- Certification: SGS and CE,it indicate this jump stilts is safe to play
- Load Range:Weight: 155~200 Ibs/70~90kg
- Manufactured By:Beijing 2008 Olympic Games Special Product's Supplier
- DHL / EMS SHIPPING,N.W:7 KG
- It is newest and popular sports gear in the world
Features:
Not a shill, but I recently got this clone and it's been pretty alright. The inserts have "Kydex" or some kind of plastic that aids with retention.
Assuming no one sells you one, there's a pretty good one on Amazon: UTG 3X Magnifier with Flip-to-side QD Mount, W/E Adjustable https://www.amazon.com/dp/B00S2FWRGK/ref=cm_sw_r_cp_apa_6y6VBbFWXPC3M
I have this one myself and its sturdy and well built, especially for the price
Hey Tech, just a heads up, here on amazon you can get 100' bundles of Rothco paracord for 7.99 with free shipping from Army Universe (in other sellers on the side). You may want to adjust your price, and I may be interested if you do.
I recently have been running mine in normal single taco's. Just a free bit of info. :)
Alright I can do $12 shipped.
Also by link I assume you meant amazon, so here it is. By my math $12 plus $6 shipping = $18, which is not too far off from a brand new one from an extremely trustworthy company, and for me peace of mind is worth $2.
anyways enough of that PMing you now.
and also if anybody replies to this with /r/theydidthemath I'm going to kill you.
2 Options for you, 3-9X40 NC Star Scope (with regular RIS rings to mount) or 2X42 red dot sight.
Let me know if you're interested in either and I can take real pictures / send some pricing. Also have a few metal hi-caps that I can toss in, thanks!
Don't know if I can do this, but it's only $24 on Amazon. Probably a better deal than getting it used for a similar price.
If you already have an AEG M4 (or other compatible platform) just get the following parts and build your own HPA gun for just about $500. It is really easy, much simpler than working on a regular AEG Gearbox.
TANK
REGULATOR
AIR LINE
POLARSTAR JACK
TINY BATTERY FOR FCU
Install the HPA Engine in your gearbox shell, attach reg, tank, and remote line and have fun!
I have one of these, interested? I'll sell for like 25 plus shipping
Here's a great charger/discharger
https://www.amazon.com/Acetech-Airsoft-Tester-Shooting-Chronograph/dp/B01GPVARTG/ref=sr_1_1?ie=UTF8&qid=1497283813&sr=8-1&keywords=acetech
Seriously. Best one on the market, and when mine broke, they sent me a new one. Also comes with free one day shipping.
it looks like this: http://www.amazon.com/Soft-Swiss-Arms-Tactical-Airsoft/dp/B0013CJLRW
and since its $50 normally i think 30 dollars would be fair.
This is the one I have and it works beautifully. Comes with a deans plug and tamiya/mini-tamiya one.
https://www.amazon.com/Valken-Energy-Airsoft-Saddle-Battery/dp/B01C04R0CO/ref=sr_1_32?s=sports-and-fitness&ie=UTF8&qid=1466450867&sr=1-32&keywords=airsoft+lipo+battery
Just make sure you have room for it. Or anything similar to that. I actually prefer admiral lipos from motion rc or venom lipos.
honestly, if you just go with a cheap chinese production or polymer segment, you're going to pay about the same price you would here.
Monstrum
Suregear
TacMark
GVN
Pro-tip you can use the crosman c11 mags. It's like 15 bucks for 2 stick mags ;)
https://www.amazon.com/2-Pack-Magazines-Crosman-Airsoft-Pistol/dp/B0017WZQDQ
This is the one I have. Trades are accepted as is paypal.
http://www.amazon.com/gp/product/B004MX3MYC/ref=oh_details_o05_s00_i01?ie=UTF8&psc=1
http://www.amazon.com/Fiber-Optic-Green-sighting-system/dp/B004MX3MYC/ref=sr_1_1?ie=UTF8&qid=1458014021&sr=8-1&keywords=fiber+optic+red+dot
If you can't find one here I have this one and it works well.