(Part 2) Best products from r/boostedboards

Alright, I'm gonna try to answer all of your questions to the best of my ability. So if I'm wrong, someone correct me.

1. The only thing you really need to fix are the belts. They go for around 10-20 depending on where you buy from. They break around 200-400 miles of riding so it's not that expensive. Links for some examples are listed below
   
   https://www.amazon.com/Boosted-Board-Belts-Factory-Quality/dp/B07L3DP6SM/ref=sr_1_4?keywords=boosted+belts&qid=1554994183&s=gateway&sr=8-4
   
   https://boostedboards.com/accessories/motor-belt-service-kit
   
   The one on boosted's site is a little more expensive but they also come with some extra screws for the motor caps and a hex key. If say a motor breaks or your battery starts to malfunction, you can email boosted support, and they'll usually repair it for you and send it back in a reasonable amount of time for free.
   
   
2. You will get around at least 11-13 miles. It also would depend on what board you get and the amount of power your board supplies.
   
   
3. If you don't ride it in the rain, a few puddles won't damage the board. I wouldn't suggest washing it with water, but using wet towels to wipe it down won't affect the board.
   
   
4. I have had a V2 board for 2 years and aside from a few scratches, the board doesn't appear to be rusting.
   
   
5. Ok, so this is completely up to you. If you want to get at least 13km of range, I would suggest getting the mini x, plus, or stealth. While the If you want a more relaxed ride with a lot of flat roads, I would go for the stealth or plus. If your commute consists of tight turns and you like to carve a lot, get the mini x.
   
   
6. The app allows you to track the total number of miles and allows you to be able to record your trips. You can also change the speed of your board on your phone or your remote and the app actually calculates how far you'll be able to travel according to your height and weight.
   
   
7. No
   
   Overall, like u/stubrauer said, if you buy cheap boards, it won't be great and it won't last long. My board has been immensely helpful for my commutes and is really an impressive piece of technology. They focus really on quality and making it a long-lasting product. Do not buy another cheap knock off. Save up money and go for a boosted board. You won't be disappointed.

For a long time, I preferred the wind in my hair, freedom of less equipment to tote around, and thought I could handle any situation (overconfidence) without major physical damage. This goes back decades, long before esk8, but since purchasing my first Boosted board, rode over 1k miles without a helmet until I took a fall that was unavoidable and (among other injuries) included bouncing my eyebrow and jaw off the pavement. Long story short, I now appreciate proper protection, but value light weight, comfort, breath-ability, slim profile, and reasonable price. I bought the helmet below and couldn't more highly recommend. The adjustable visor can be removed, but I ended up putting it back on. It helps perfectly hold a powerful headlamp in place and sometimes useful in blocking high beams pointed in your direction (if you have ever used a baseball cap to do the same, you know what I'm talk'n about). I actually liked the original paint job/styling, but know a buddy with equipment, so had it powder-coated with this pretty sweet charcoal color with reflective properties.

https://www.amazon.com/gp/product/B00E5OMVAY/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

I'm really confused with this comment... I got the same skate tool with my stealth and my Mini X. It has the hex key (the stick), the L shaped smaller hex key, and the third (larger) piece that the stick is housed in. The larger piece has 2 hex sockets, one on each end... and it fits the wheel nut perfectly. THe larger (other) side of it fits the kingpin nut perfectly. The little L shaped hex key fits the brackets for wheel cover's 2 screws.


The setup was identical on both boards. It comes with everything you need to change the wheels and the belts. The stealth even came with spare belts, though my Mini X did not. Hit me up if you have questions brother, you should be good to go for changing out the wheels.


Also:


If you want to buy the same exact tool that they advertise the process with on their videos:
https://www.amazon.com/gp/product/B000RUBY1C/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Grab the 3mm and 4mm version and also one of these:
https://www.amazon.com/gp/product/B072LY5824/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

​

The quality on all of those is fantastic. Lastly, I highly recommend a bit of Frog Lube paste for your pivot cup and bushings, just a very thin coat will lubricate your trucks for buttery smooth turns, and it smells like wintergreen lifesavers. :)

​

Yes, I know what Froglube was made for, it also happens to be a perfect product for skate applications LOL. Active duty Marine, had a lot in stock and needed a basic lubricant for those pivot cups. It was like the stuff was made for this!

This is NeverWet:

https://www.amazon.com/gp/product/B00KRHF8E4?pf_rd_p=d1f45e03-8b73-4c9a-9beb-4819111bef9a&pf_rd_r=WT9QFP6MHG1QQMKSKKCM&th=1

Another option is made by Scotchgard:

https://www.amazon.com/Scotchgard-Heavy-Water-Shield-13-Ounce/dp/B01M5BI455/ref=sr_1_5?ie=UTF8&qid=1537155943&sr=8-5&keywords=scotchguard%2Bfabric%2Band%2Bupholstery%2Bprotector&th=1

Both are silicone based products -- the bag has an application of a similar type of product already, but all of these types of waterproofing sprays will require periodic re-application to maintain effectiveness. I prefer the Scotchgard product only because I think it is easier to apply, but there are a number of different products that would probably do a good job. As always, follow the directions on the can/bottle and you shouldn't run into problems.

No spray will make the bag completely waterproof so it's listed as water-resistant. The zippers (and to a lesser extent the seams) are the most vulnerable points of entry on a bag like this -- it sounds like you have already tested it somewhat -- I just wouldn't let it get completely soaked since it's not constructed to be a dry bag and the contents inside will get wet eventually.

ps. Also not sure I’d advocate this method of locking up the board but I guess it depends on where and when you’re doing this — you are the best judge of that so if it’s something you feel comfortable with then good on ya!

Thanks for the tip man. This is a little heavy weight-wise though power wise it's awesome.

Someone on these forums deduced that the capacity of the Rev battery(boosted doesn't list it on the website) is around 370wh, so the 500 wh capacity would be great but I need something smaller and lighter for my commute.

I found this, which is apparently 116wh capacity. If I divide 116/370 I get around 30% charge which would be ideal because I only need a little bit extra.

https://www.amazon.com/dp/B07SPBR5YH/ref=psdc_7073960011_t1_B07F119R6P?th=1

It's much lighter and easier to carry and I'm hoping something like this would give me that small, extra boost.

Pun intended.

WTS: 2019 Boosted Board Stealth V3 with 320 miles,

ALL YOURS FOR AN EASY $1,000.00 USD or trade..let me know what you got...I am in Central Florida

included is 2 Extended Range Battery Pack,

I have upgraded the pulleys to "Speed Pulleys for Abec11 Refly Longboard Wheels - 97mm 74a,

3 sets (total of 6) belts LithiumCore Boosted Board V2 Belts ( Fits Mini S, Mini X, Plus & Stealth),

Kutrick Boosted Board Kevlar Belts for Boosted Board V2, Mini S, Mini X, Plus, and Stealth,

Bones® BIG BALLS™ REDS® Skateboard Bearings 8 pack,

(2) sets total of 4 Shredlights: Two Skateboard Headlights - Three Brightness Levels - Water Resistant - Easily Removable and Rechargeable,

EXTENDED RISER – FOR BOOSTED,

BASH GUARD M (SINGLE) – FOR BOOSTED BOARDS rear and front boosted board,

FL3D PRO BUSHINGS ( I have both the Hard Blue - 92A and a Soft Grey - 84A .),

WEDGE RISER (SET OF 2) – FOR BOOSTED BOARDS ,

RETRACTABLE REMOTE LANYARD,

Hubro Designs Slimfit Backpack XX (G5.1) - Boosted Board Travel Bag ,

way to many Skateboard Longboard Speed Washers and Spacers Set for Truck Axle Mounting Equipment Accessories, 104pcs, Hardware, Bearing Performance ,

Sector 9 Bolt Pack Set, Black, 2-Inch,

Ampulla Oricycle Rechargeable Bike Tail Light LED - Remote Control, Turning Lights, Ground Lane Alert, Waterproof, Easy Installation for Cycling Safety Warning Light,

DIYE Skateboard Longboard Nose Guard Tail (2 pcs) for Boosted Board V2 V1,

DECK HOOK: Professional Skateboard, Longboard & Electric Skateboard Holder Carrier | Compatible with Most Dual Shoulder Strap Backpack | Adjustable Straps& Hands Free Use,

Merkapa Ratchet Skateboard T Tools,

Sk8ology Carabiner Skate Tool 2.0 Black Red,

Pro Bike Tool Mini Ratchet Tool Set - Reliable and Stylish Multitool Repair Kit for Road and Mountain Bikes - Versatile EDC Multi Tool for Your Bicycle, Home or Work - Hard Case Pouch,

Im sure I am forgetting some things but there it is..

ALL YOURS FOR AN EASY $1,000.00 USD

or trade..let me kln ow what you got...

I am in Central Florida

Awesome video, love the multiple shots/angles. How many cameras did you bring?!?! lol

Regarding the crash, I'm not as big of an advocate for pads as I should be considering I sometimes ride with the same outfit (shorts, short sleeve tee) but I ALWAYS wear full fingered gloves. I'm a dev so if anything happens to my hands or they get scraped up too much to type I'm kinda f**** lol. I wear these (http://amzn.com/B00NIQR1PK) tactical gloves because they breath really well in the 50-70 degree weather here. I'll probably be getting more pads for my knees and elbows too for when I ride with shorts and short sleeve. I'd recommend buying a new helmet as well if it looks like its been deeply impacted just to make sure it holds up in the future.

I used to have these issues when inline speedskating and walkers taking up the entire bike path... Then I got on of these https://www.amazon.com/Shoreline-Marine-Air-Horn-1-4/dp/B01NCSJGGC that fit in my palm with ease. A simple blast was sufficient to get them to jump rather quickly out of the way. If they get in your face, it's pretty easy to just toot it again saying "what's that, I can't hear you!" ;*)

Also I got pretty good at mimicking a police siren with my voice which also clears the path pretty well.

Here's what I have-

Backpack: https://www.dakine.com/en-us/bags/backpacks/street-backpacks/mission-25l-backpack-17w/

Helmet: https://triple8.com/product/the-certified-sweatsaver/?category_name=skate

Shoes: https://www.vans.com/shop/suede-canvas-old-skool#hero=0

Pads: https://triple8.com/product/saver-series-3-pack-box/?category_name=skate

I only used all of the pads for about the first week or so, but I still wear the wrist guards-they've prevented serious injuries!

​

Board light (tail of the board): https://www.amazon.com/gp/product/B015IEJ0GC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Board light #2 (front of the board): https://www.amazon.com/gp/product/B015IFA03I/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Front Backpack light (goes on my backpack strap, or hooked to my jacket on my forward facing shoulder): https://www.olightstore.com/h1r-cool-white.html

Back Backpack light (goes around my backpack): https://www.amazon.com/gp/product/B00N1SM2NQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

The board lights aren't super bright, they're mostly so people can see what I'm riding. The O light makes riding at night very safe, and my back light has great visibility.

As for tools, I carry my skate tool and a couple of hexes, and some spare belts. I have a charger I leave in my office and one in my backpack all the time.

​

Hope this helps!

I love this one ...

T-REIGN Outdoor XD Retractable... https://www.amazon.com/dp/B005JI7UJM?ref=ppx_pop_mob_ap_share

It's not up your sleeve ... But I prefer it on my belt..

I like that if I bust my ass and simply let go of the remote it's snaps back to my waist..

I also like the idea that I'm never going to lay my remote down and forget about it...

And when I fall I can simply let go of the remote and use my hands to protect myself rather than trying to protect what's in my hands..

http://www.amazon.com/Loctite-Blue-Threadlocker-6-Milliliter-209728/dp/B000I1RSNS/ref=sr_1_1?ie=UTF8&qid=1462848673&sr=8-1&keywords=loctite+blue
Try to apply this product on the screw which tight the motor mount to the truck. based on what the boosted customer service said, those screws were designed to hold motor mount to the truck, temporarily while the epoxy completely dry. But, thread locker and screw hold motor mount really well. It has been almost 4months after I apply thread locker. and it still holds with any problem. but send them back to boosted before ur warranty ends just for check up, which i ll do pretty soon:)

Make sure to leave ur board for 24hours after u apply thread locker. make sure do not touch or ride for 24hours!!

What's up guys!
Still trying to find something better, battery-wise, but overall I like the aesthetic of it. Here's what I bought:
https://smile.amazon.com/gp/product/B013FZHD1K/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1

I attached the battery pack on the side of the Boosted battery with gorilla tape (duct tape) and used hot glue around the board to stick the lights. Here's a pic of the back of the board.
https://drive.google.com/file/d/0B0EaUVYwJYZESVF6cnJIM3lzWEE/view?usp=sharing

If you have any suggestions about it, let me know. I'd like some feedback

I bought a rifle case to travel with. I thought it would offer more protection than the box or a board bag. This is the one I got:
Plano All Weather Tactical Gun Case, 42-Inch https://www.amazon.com/dp/B00E2217I6/ref=cm_sw_r_sms_apip_45jEn9AEXWpbd

It's almost perfectly sized; you need to take out the bottom layer of foam but it still fits and feels well protected.

Regarding cost, I was lucky that bags were included in my ticket cost. However I definitely see how it would suck if you had to pay an extra baggage charge.

I personally have the Amazon Basics version and its awesome.

https://www.amazon.com/AmazonBasics-Folding-Acoustic-Electric-Guitars/dp/B018FCZKR2

Consensus from other users that bought both is that the Amazon Basics one is better quality.

-This is a good idea to get so you don't scuff up the board early on. Otherwise I wouldn't mod anything until your first 100 miles.

Surf Co Tail Guard (Choose Color & Size) (Black, Regular) https://www.amazon.com/dp/B0779F2DWH/ref=cm_sw_r_cp_apa_i_LyrmDb8MRF48S

-Definitely get a guitar stand as well. (you'll have to bend the it up a bit so the tail isn't sitting on the ground

ChromaCast CC-MINIGS Universal Folding Guitar Stand with Secure Lock https://www.amazon.com/dp/B00BU9KCXK/ref=cm_sw_r_cp_apa_i_qCrmDbMY159CE

If you're having a motor simply, stop running sometimes, try deoxit. I'll add a link in a minute

That fixed my issue, it's 15 bucks and it's good to have anyway. If it's still not working then I guess you'll have to send to boosted:/

Edit: CAIG Laboratories D100L-2DB Electric Cleaner https://www.amazon.com/dp/B0002BBVN2/ref=cm_sw_r_cp_apa_i_cL7LDb0M6DDRF

This stuff really helps with bad electrical connections, if it's just one motor. It very well could be an issue with the Esc though. Good luck

https://www.amazon.com/gp/product/B00E2217I6/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

I use this and it works great. I like how the hard case offers some protection. I travel with my board by air a few times a month and after carrying it around I think spending a little more for a wheeled case would be totally worth it.

https://www.amazon.com/Classic-Army-Hard-Wheeled-Case/dp/B01BN627VO/ref=sr_1_7?ie=UTF8&qid=1493491359&sr=8-7&keywords=wheeled+rifle+case

Not a dumb question exactly, you're just not putting in the effort!

Loctite Heavy Duty Threadlocker, 0.2 oz, Blue 242, Single https://www.amazon.com/dp/B000I1RSNS/ref=cm_sw_r_cp_api_v9ugzb8P1PS7R

Google is your friend :)

Thanks!

lychee Neon Glowing Strobing Electroluminescent Light El Wire w/Battery Pack for Parties, Halloween Decoration (Orange, 9ft) https://www.amazon.com/dp/B013FZHD1K/ref=cm_sw_r_cp_api_i_CB19AbB3J7SX8

Powering EL wire along the side.

I love this one. Been using it for months with no issues
Hubro Designs Boosted Board Longboard Backpack - 20L Backpack with Electric Skateboard Carry Panel https://www.amazon.com/dp/B07HB89Y7P/ref=cm_sw_r_cp_api_i_5XUDCbBKH64A9

How do shredlights compare to something like this https://www.amazon.com/dp/B01HR2Y6N0/ref=cm_sw_r_cp_apa_S0qgzb33G7E0Z

I saw another post with someone having the BLITZU ones. They're cheaper, but I'm wondering which one is easier to take on/off for charging.

​

Order these bearings instead. Better than stock and the same price:

Boosted Board Ceramic Bearing Upgrade Service Kit by ACER Racing (V2) https://www.amazon.com/dp/B01MYG7WT0/ref=cm_sw_r_cp_api_82BGAbWY8JCA7

> I need a nighttime setup. I'm thinking headlamps + rear lights attached to the board. Any suggestions?

Shred lights or this & this is working pretty well for me

It stands my V2 up perfectly

AmazonBasics Guitar Folding A-Frame Stand for Acoustic and Electric Guitars https://www.amazon.com/dp/B018FCZKR2/ref=cm_sw_r_cp_api_i_4E9EDb327X3AR

No but what I did was bought this bag
https://www.amazon.com/dp/B07HB89Y7P/ref=cm_sw_r_cp_api_i_DzoACbWBKY9PC

And then these bungees
https://www.amazon.com/dp/B00AHV3DMO?ref=ppx_pop_mob_ap_share

And tied 4 to the front of the bag so you can wrap top and bottom support around all the wheels/trucks and it holds it right in place and doesn’t move either.

check this case out, also you might want to check Uline.com, find boxes with 275 test strength.

https://www.amazon.com/Plano-Weather-Tactical-Case-42-Inch/dp/B00E2217I6/ref=sr_1_4?s=hunting-fishing&ie=UTF8&qid=1474248254&sr=1-4&keywords=rifle+case

Bearings:
Boosted Board Ceramic Bearing Upgrade Service Kit by ACER Racing (V2) https://www.amazon.com/dp/B01MYG7WT0/ref=cm_sw_r_cp_apa_UKHJzbDETJTXR

Wheels, cheap!
97mm Longboard Flywheel Solid Black https://www.amazon.com/dp/B071YCD1TP/ref=cm_sw_r_cp_apa_GLHJzbD0DQ2S3

Instead of this, Would the boosted board fit on a , Plano All Weather Tactical Gun Case, 42-Inch?

https://www.amazon.com/gp/aw/d/B00E2217I6/ref=mp_s_a_1_3?ie=UTF8&qid=1518321101&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=rifle+case&dpPl=1&dpID=41TFfftJoWL&ref=plSrch

I live in NYC with bunch of reckless drivers. So I got a full face helmet.

and these fairly priced knee, elbow and wrist guards

For gloves, I got this as I will not be wearing the wrist guard because I'm more of a commuter than a fun rider so I need my hands fully functional at all times.

And finally, these reflective vest for the night zombies.

If you have to, Bag it and nobody asks questions. Hubro Designs Slimfit Backpack XX (G5.1) - Boosted Board Travel Bag https://www.amazon.com/dp/B07KSQXK73/ref=cm_sw_r_cp_api_i_dEplDbX9E7P12

Hubro Designs Boosted Board Longboard Backpack - 20L Backpack with Electric Skateboard Carry Panel https://www.amazon.com/dp/B07HB89Y7P/ref=cm_sw_r_cp_apa_AGQ3Bb47EKK60

I use this one:

ChromaCast CC-MINIGS Universal Folding Guitar Stand with Secure Lock https://www.amazon.com/dp/B00BU9KCXK?ref=yo_pop_ma_swf

Plano All Weather Tactical Gun Case, 42-Inch https://www.amazon.com/dp/B00E2217I6/ref=cm_sw_r_cp_tai_0-7uxb1KD4ERF

I have this one. It is perfect and is much cheaper. I primarily leave this case in the car/trunk and put the board in there while doing local commuting. This case is likely an oversize item when boarding planes. So check in fee + oversize fee. Haven't tried tho

AmazonBasics Guitar Folding A-Frame Stand for Acoustic and Electric Guitars https://www.amazon.com/dp/B018FCZKR2/ref=cm_sw_r_cp_apa_i_JZH2Cb50D8T8T


Fits the mini and longboard well on smallest setting.

It's this one: Plano All Weather Tactical Gun Case, 42-Inch https://www.amazon.com/dp/B00E2217I6/ref=cm_sw_r_cp_api_zdTCxbQQ99P0G

It fits ok. Just ok. It bulges a bit when you close it. Still does the job, though.

$12 from amazon! https://www.amazon.com/AmazonBasics-Folding-Acoustic-Electric-Guitars/dp/B018FCZKR2

These are them on Amazon - https://www.amazon.com/Boosted-Ceramic-Bearing-ACER-Racing/dp/B01MYG7WT0/

I've made a couple comments in the past that you can check out for gear recommendations:
https://old.reddit.com/r/boostedboards/comments/993v45/mini_x_arriving_today_commuter_gear/e4l7smn/

https://old.reddit.com/r/boostedboards/comments/8vx25x/about_to_pull_the_trigger_on_a_mini_x_what_gear/e1r37d6/

I've also found this long list, but it contains some products I wouldn't recommend purchasing, so use cautiously.

Regarding a rack, simply purchase a cheap guitar stand. They do an excellent job at holding a board while not in use.

Regarding bash guards, Flatland 3D is by far the best option.

Regarding water, avoid it like the plague. If the Boosted Board has an enemy, that enemy is moisture. Even a small amount of moisture is enough to gum up the bearings and ruin motors. I used to keep my board in the bathroom and even though I always kept the window open, the humidity from showering caused one of the motors to go bad. Plus, riding on wet pavement is a great way to fall off your board. The pavement becomes slicker than ice.

Be sure to clean the screw threads first with acetone. This will remove any old Loctite or dirt so that the new Loctite will adhere. Use Blue Loctite: http://amzn.to/2xpsbl6 but only a small amount, don't over do it.

Most people tend to suggest this one here
But personally I prefer the rifle cases way more and will be getting this one as soon as I get my V2!

Here

https://www.amazon.com/dp/B01HOUN7NA/ref=cm_sw_r_cp_apa_g0qgzbG1WHQ8J

https://www.amazon.com/dp/B01HR2Y6N0/ref=cm_sw_r_cp_apa_S0qgzb33G7E0Z

Is this the type of stand you are using?

https://www.amazon.com/ChromaCast-CC-MINIGS-Universal-Folding-Guitar/dp/B00BU9KCXK/ref=sr_1_5?s=musical-instruments&ie=UTF8&qid=1540143451&sr=1-5&keywords=Guitar+Stand

I use this attached to the front of my board. I find it works more so that other people see me, then so that I can see in front of me.

https://www.amazon.com/gp/product/B015IFA03I/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

AmazonBasics Guitar Folding A-Frame Stand for Acoustic and Electric Guitars https://www.amazon.com/dp/B018FCZKR2/ref=cm_sw_r_cp_api_i_jbvCDb1DW4ND9

It is: https://www.amazon.com/dp/B018FCZKR2

AmazonBasics Guitar Folding A-Frame Stand for Acoustic and Electric Guitars https://www.amazon.com/dp/B018FCZKR2/ref=cm_sw_r_cp_api_UsORBbDF68Z1C

Testing out these belts (Will check it out for a few days and leave some feedback) : https://www.amazon.ca/gp/product/B07L3DP6SM/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

I ordered some of these: https://smile.amazon.com/dp/B01MYG7WT0/ref=cm_sw_em_r_mt_dp_U_FJIvCbWT2RQRG

does anyone have experience with that brand?

​

Also, some new axle nuts according to this post: https://www.reddit.com/r/longboarding/comments/16ryx6/getting_cheap_and_custom_mounting_hardware_from/

I absolutely hate how fingerless gloves doesn’t protect my fingers from the grip tape fray when transporting the board. I bought these and will report in once I use them for a spell:

FREETOO Tactical Gloves Military Rubber Hard Knuckle Outdoor Gloves for Men Full Finger Gloves Black (M) https://www.amazon.com/dp/B00NIQR1PK/ref=cm_sw_r_cp_api_i_nJl8AbFWW6B6N