(Part 2) Best products from r/enail
We found 14 comments on r/enail discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 32 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.
22. 12 Volt 10 Amp DC Power Supply Adapter, Standard
World Wide Input Voltage 100-240VAC 50/60HzOVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection)Tested Units. In Great Working Condition.UpBright 30 days money back guarantee. 1 full year service warranty.UpBright Ne...
23. Etekcity Infrared Thermometer 774 (Not for Human) Temperature Gun Non-Contact Digital Laser Thermometer-58℉ to 716℉ (-50 to 380℃), Standard Size, Yellow & Black
- NOT FOR HUMAN: Temperature readings from these devices are inanimate objects. The measured temperature for humans or animals will be inaccurate
- BETTER ACCURACY: 12:1 D:S, meaning it can accurately measure targets at greater distances compared to most others; For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17 inches (36 cm)
- TARGET QUICKER: Measure surface temperature ranging from -58℉ to 716℉(-50℃ to 380℃), with 2 units ℉/℃ to choose; Response time: ≤500Ms; A built-in laser gives you the precision to hone in on the exact space you want to measure
- VERSATILE DESIGN: Infrared technology makes it to measure the surface temperature of various objects especially temperatures above boiling points and below freezing points; Use it for cooking, ovens; AC, refrigerators; or soapmaking cats toy etc
- Note: This color model don't contain emissivity adjustment feature and max temperature feature
- ADDED FUNCTIONS: The LCD screen is backlit, also has an auto-off function to extend the battery life, and features a low battery indicator so you never accidentally run out of juice (battery included)
Features:
24. AGPtEK PID Temperature Controller TA4-SNR Solid State Relay with 1 Alarm, SSR Control Output Relay Alarm Output
♦ Step Control: This PID temperature controller is applied with step control, 2 independent PID control for heating/cooling over temperature, pressure, level, flowm, etc.♦ 7 Kinds of Alarm Mode: high / low / high deviation / low deviation/ interval / out of interval/breakage alarm.♦ Easy Opera...
25. Opto 22 Z240D10 Z Model DC Control Solid State Relay, 240 VAC, 10 Amp
- Solid state relay for fast response and high vibration resistance
- 4,000V of optical isolation for insulating the circuits
- Push-on quick-connect terminals for high-volume applications
- Zero-voltage switching to reduce arcing and extend the life of the device
- UL Recognized for safety, CSA and CE certified for quality assurance
Features:
26. Kromedome Essential Oil Aromatherapy Diffuser Control Box
LCD DisplayUSB port6-1 universal Nailfast heating 16MM Coil
27. Opto 22 120A10 AC Control Solid State Relay, 120 VAC, 10 Amp, 4000 V Optical Isolation, 1/2 Cycle Maximum Turn-On/Off Time, 25 - 65 Hz Operating Frequency
- Solid state relay for fast response and high vibration resistance
- Panel mount for attaching to a conductive panel or heat sink
- Zero-voltage switching to reduce arcing and extend the life of the device
- Built-in snubber for preventing arcing across contacts
- UL Recognized for safety, CSA and CE certified for quality assurance
Features:
28. Elenco Sound Activated Switch Soldering Kit [ SOLDERING REQUIRED ]
Hone your DIY soldering techniques on the Sound Activated Switch Soldering Kit; Enjoy the pleasure of having assembled and soldered it yourselfClap your hands together twice and watch the Sound Activated Switch turn on the light emitting diode (LED); Clap twice more and watch the LED turn offA monos...
29. Parts Express Electronic Solder 60/40 1.2mm (0.050") Diameter 1 lb. Spool
60% tin and 40% lead with flux in the coreSolder for electronic and electrical work
30. Blazer GT8000 Big Shot Butane Torch
- Anti-flare, brass-frame nozzle, for safety and flame control
- Attachable tabletop base, for hands-free use
- Gas-flow adjustment dial, to control flame length
- Piezoelectric ignition system, requires no electrical connection
- 2,500-degree F, torch flame, for a more precise flame tip
- Treat your torch as you would any fine instrument. Do not drop or otherwise abuse
Features:
31. Etekcity Lasergrip 1080 Non-Contact Digital Laser Infrared Thermometer Temperature Gun -58℉~1022℉ (-50℃~550℃), Yellow and Black
- NOT FOR HUMAN: The instant read thermometer can't measure the internal temperature of an object; The readings from it are inanimate objects, and the measured temperature for humans or animals will not be correct; Class 2 laser, optical power 0.5-0.9Mw
- BETTER ACCURACY: 12:1 D:S, this temperature gauge can accurately measure targets at greater distances compared to most other thermometers; For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17 in
- TARGET QUICKER: Measure surface temperature ranging from -58℉ to 1022℉/-50℃ to 550℃, and unit switching ℉/℃. A built in laser gives you the precision to hone in on the exact meat cooking, griddles, pools, refrigerators, and any you want to measure
- ADDED FUNCTIONS: The LCD screen of the infrared thermometer is backlit, also has an auto-off function to extend the battery life, and features a low battery indicator so you never accidentally run out of juice (battery included)
- VERSATILE USES: With Infrared technology, the temperature gun can measure the temperatures above boiling points and below freezing points; Use it for cooking, pizza ovens, griddles, BBQ grills; A/C, refrigerators, pools; candy&soap making, etc
Features:
Pocket Clear Straw https://www.amazon.com/dp/B07JR4NPPD/ref=cm_sw_r_cp_apa_i_AfD1Db2ABKX2Z
I don't see why you would do that when you could just make a 12v unit and then plug an ac to dc power brick http://www.amazon.com/gp/product/B00B8TRF0A/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 into it when you want to use it in the house and then just plug the battery into it when you leave the house.
Edit: just make sure that the battery and the wall adapter are wired to the same plug that you are going to use on the unit. And also that the battery outputs enough continuous amps to run the unit.
I've never had a problem with this temp gun. If you can afford a Liger, you can afford this.
Etekcity Lasergrip 1080 Non-contact Digital Laser Infrared Thermometer Temperature Gun -58℉~1022℉ (-50℃~550℃), Yellow and Black https://www.amazon.com/dp/B00DMI632G/ref=cm_sw_r_cp_apa_i_3P14AbZ9RCK9B
This is the one I've used for over a year for my dab setup and it works flawlessly. $17 on Amazon, elegible for prime
This is a bit thicker than what i've been using lately.. i've got some .032 60/40.. http://www.amazon.com/Electronic-Solder-050-lb-Spool/dp/B0002KR9F2/ref=sr_1_14?ie=UTF8&qid=1398719851&sr=8-14&keywords=solder
http://www.amazon.com/Elenco-K-36-Sound-Activated-Switch/dp/B00123COBW
http://www.amazon.com/gp/aw/d/B0058UX04U/ref=mp_s_a_1_3?qid=1417659618&sr=8-3&pi=AC_SY200_QL40
I think I'm going with this model. Just going to find it cheaper
could it be that i should have bought http://www.amazon.com/Digital-Display-Temperature-Controller-Alarms/dp/B005NGL4KG/ref=sr_1_1?ie=UTF8&qid=1376442730&sr=8-1&keywords=mypin+ta4
instead of
http://www.amazon.com/AGPtek-Temperature-Controller-TA4-SNaRWith-alarm/dp/B00BVWYHVO/ref=sr_1_4?ie=UTF8&qid=1406390962&sr=8-4&keywords=mypin+ta4
Checkout this one! Heats up fast and has a USB port!
6-1 universal
https://www.amazon.com/dp/B073G8Y13R/ref=cm_sw_r_cp_api_W9HKzbP2WCKC6
but in the end you get what you pay for non annealed china glass, her tube is small is enough to convert with an adapter imho. adapter plus banger from dhgate maybe 20-30$ torch 40 at bb&b. i would honestly buy a big shot on amazoninstead. im not a fan of the bb&b torches the pizo ignitor ALWAYS fails after about 9 months causing you to have to return and get a new one id rather have something last 4-6years. i have had my blazer gb2001 for 8 years now still lights everytime.
The out light blinks on the PID so I'm assuming that means it's attempting to send power to the SSR and in turn to the coil. So either the SSR is bad, or there is something wrong with my XLR jack. This is the jack I used http://www.amazon.com/gp/product/B00H3SKKRK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1