(Part 3) Best products from r/ft86
We found 20 comments on r/ft86 discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 361 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 41-60. You can also go back to the previous section.
42. Optimum (20451 Opti-Clean - 18 oz.
- Soy-based polymers combined with strong lubricants and release surface debris to prevent abrasion for easy removal with a micro fiber or cotton towel
- Dries clear and non-sticky with a gloss agent for shine and protectant that leaves a slick surface to help repel dirt and road grime; Makes follow up cleanings easier too
- Conserves water with no wash or rinse water required. Contains no harmful surfactants, cleaning agents or VOCs. Ideal for areas with water restrictions; Great for anyone living in an apartment or condo with no access to water for car washing
- Clean and shine your vehicle anywhere in minutes
- Same proven polymer system as Optimum No Rinse Wash and Shine in an easy to use anywhere spray formula
Features:
43. Optimum (22752 Opti-Clean - 32 oz.
- Soy-based polymers combined with strong lubricants and release surface debris to prevent abrasion for easy removal with a micro fiber or cotton towel
- Dries clear and non-sticky with a gloss agent for shine and protectant that leaves a slick surface to help repel dirt and road grime; Makes follow up cleanings easier too
- Conserves water with no wash or rinse water required. Contains no harmful surfactants, cleaning agents or VOCs. Ideal for areas with water restrictions; Great for anyone living in an apartment or condo with no access to water for car washing
- Clean and shine your vehicle anywhere in minutes
- Same proven polymer system as Optimum No Rinse Wash and Shine in an easy to use anywhere spray formula
Features:
44. SCOSCHE MPD-XTPP1 MagicMount Pro Universal Magnetic Mount Holder for Mobile Devices, Black
Compatible Phone Models: Samsung Galaxy S8 Iphone X Iphone 8
45. Drop Stop - The Original Patented Car Seat Gap Filler (AS SEEN ON Shark Tank) - Set of 2
- Drop Stop provides 100% Gap Coverage in front of, surrounding and behind seat belt catch. Drop Stop attaches to the seat belt catch via built in slot; moves with the seat and no need to readjust or reinstall.
- As Seen on Shark Tank, Drop Stop blocks that annoying yet ever so dangerous gap between your car or truck seat and center console.
- Drop Stop is the Original and Patented Seat Gap Filler. Drop Stop will never fall apart and lasts a lifetime.
- Each package comes with 2 Drop Stops (1 for the driver side and 1 for the passenger side; universal fit). You also get two bonus gifts; a Slide Free Pad and an LED Credit Card Light.
- One size fits most vehicles. High Grade Neoprene casing allows Drop Stop to contract or expand to whatever size gap you have. One color blends all. The Gap is always a dark shadow so once you install Drop Stop, you won't know it's there until it Stops the Drop.
Features:
46. Metra 95-8202 Toyota DDIN Multi Dash Kit
- Easy conversion from 2-shaft to din opening
- Includes easy to use instructions and all necessary hardware
- Grand prix 1994-2003
- Designed Specifically For The Installation Of Double Din Radio Or Two Single Din Radios
- High-Grade Abs Plastic
- Included Components: Dash Kit
- Hardware
- Manual
- Designed Specifically For The Installation Of Double Din Radio Or Two Single Din Radios
- High-Grade Abs Plastic
- Contoured And Textured To Match Factory Dash
- All Necessary Hardware To Install An Aftermarket Radio
- Comprehensive Instrution Manual. All Necessary Hardware To Install An Aftermarket Radio
Features:
47. Meguiar's X2000 Water Magnet Microfiber Drying Towel, 1 Pack
- REDUCED DRYING TIME: This means less wring-outs and better absorbency
- BEST IN CLASS: Absorbs up to two times the water of traditional terry towels
- NO STREAKS: Leaves a spot-free finish without streaking
- REUSABLE: High-quality means you can use again and again (machine washable)
- LARGE SIZE: 22” X 30” waffle weave texture microfiber towel
Features:
48. PAC USB-TY1 Toyota/Lexus OEM USB Port Retention Cable
- Usb port retention cable
- For 2012-up Toyota and Lexus vehicles
- Retains the use of the OEM USB port when replacing the factory radio
- Simple installation
- Connector Type:4 pin USB Type A
Features:
49. EvZ 22AWG 4pin LED Electric Wire 22 Gauge 66ft 20m Conductor Extension Cable Line Cord for RGB LED Strip 5050 3528
led cable extension wire rgb connector strip conductor splitter 4pin 5050 3528 22 gauge awg ga lightingHigh qulity PVC, fetures flame retardant, high compressive strength adopted, anti-aging, excellent performance in corrosiveness resistance.Max Voltage: 300V, Max Current: 3.2A, Color: Black\Green\R...
50. AspenTek 10mm Wide White LED Strip Light Connector Adapter 4 Pin Connector for Connecting 3528 5050 RGB LED Light Strips and 44key/24key Wireless Infrared Controller, No Need Welding,10 Pack
Suitable for 10mm wide 3528 or 5050 RGB LED lighting strips and wireless infrared controllerNo need welding or soldering;easy to use10mm wde;15cm length for every cable; 4 pin 22AWG flexible copper wire allow you bend the wires whatever angle you require4pin male connector included make it as a male...
51. ESUMIC LED Strip 3528 5050 RGB 4 Pins Splitter Connector Cable White (1to4 splitter cable)
- For led strip light single color 3528 5050
- Product Name : RGB Light Strip Cable
- This DC Power Adapter Cable Pigtail splits 1 power signal into 4
- Package Content : 1 x RGB LED Strip splitter Connect Cable ;4 x 4pin plug adapter
Features:
52. TEKTON 15353 3/8-Inch Drive by 11-Inch Breaker Bar
- Breaks loose rusted or stuck nuts and bolts
- 180-degree, chrome moly flex head lets you work at any angle
- Spring-loaded ball bearing retains sockets
- Forged and hardened chrome vanadium steel construction
- Meets or exceeds ANSI torque standards
Features:
53. TEKTON Combination Wrench Set, 15-Piece (8-22 mm) - Pouch | WRN03393
- Includes 15-pc. combination wrenches: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 mm; Roll-up storage pouch
- Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces
- 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers
- Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off
- Made of premium chrome vanadium steel with a mirror chrome finish
Features:
54. TEKTON 3/8 Inch Drive Deep 6-Point Impact Socket Set, 13-Piece (7-19 mm) | 47925
- Includes 13-pc. 3/8 in. drive deep 6-pt. impact sockets: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm; Storage case
- High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off
- Extra-deep broach accommodates longer fasteners
- High-contrast permanent laser etched size markings are easy-to-read, even in low light
- Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish
- Meets or exceeds ANSI performance standards
- High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off
- Extra-deep broach accommodates longer fasteners
- High-contrast permanent laser etched size markings are easy-to-read, even in low light
- Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish
- Meets or exceeds ANSI performance standards
Features:
55. TEKTON 3/8 Inch Drive Click Torque Wrench (10-80 ft.-lb.) | 24330
Includes: 1-pc. 3/8 in. drive torque wrench; Storage case; Product manual with torque conversion chartWrench emits a click that can be heard and felt when the preset value is reachedHigh-contrast dual-range scale is easy to read, even in low lightReversible ratchet head drives in both directions and...
56. TEKTON 14932 3/8-Inch Drive x 7-Inch Low Profile Polished Ratchet
- Low-profile oval head slides into tight spaces
- Fine, 72-tooth ratchet needs only 5-degree swing arc
- Lock-on, quick-release drive tang prevents dropped sockets
- High-strength chrome vanadium steel handle and chrome moly steel ratchet gear
- Corrosion-resistant fully polished chrome plated finish
Features:
57. TEKTON WRN53190 Ratcheting Combination Wrench Set with Roll-up Storage Pouch, Metric, 8 mm - 19 mm, 12-Piece
- Includes 12-pc. ratcheting combination wrenches: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm; Roll-up storage pouch
- 6-point box end snugly fits hex-shaped fastener heads and resists slipping off while you work
- Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off
- 72-tooth ratchet gear needs only a 5-degree working swing arc
- Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces
Features:
58. Nilight GA0007 1 2Pin Way 16AWG Waterproof Wire 1.5mm Series Terminal Connector-5 Pack,2 Years Warranty
- 16 AWG male & female waterproof connectors with 10cm wire.
- Operating temperature : -40℃~+120℃
- 2 position rectangular black housing connector (hole dia: 0.24")
- Applied with the good quality rubber seal to make it better dustproof and waterproof. It most use for marine, car, truck, boat, motorcycle, and other wire connections
- Package Includes: 5 Pack Waterproof Connector
Features:
59. Micro USB Host OTG Cable with Micro USB Power for Samsung i9100 i9300 i9220 i9250 by AtomicMarket
60. RioRand 3-01-0076 Buck Converter (Step Down Module Power Supply Output 1.23V-30V (1Pcs-LM2596), LM2596 DC)
INPUT: DC 3V to 40V (input voltage must be higher than the output voltage to 1.5V above can not boost)Output: DC 1.5V to 35V voltage continuously adjustable, high-efficiency maximum output current of 3AFeatures: all sanyo solid Capacitors, the 36U thickening circuit boards, high-q inductance with ou...
I'm a complete psychopath when it comes to the detailing of my car. My home set-up costs literally $900 not including my back-up product.
In your situation, I would go to Obsessed Garage's Youtube channel and watch his waxing process. You can't use all of his tips but what you can do is use his guide on Collinite 845 + Jescar Power Lock waxing and that will put a great seal on your car.
https://www.amazon.com/Collinite-Liquid-Insulator-Wax-845/dp/B000JK2D06/ref=sr_1_1?s=automotive&ie=UTF8&qid=1504300193&sr=1-1&keywords=collinite+845
https://www.amazon.com/Jescar-Power-Polymer-Paint-Sealant/dp/B0050IQH9K/ref=sr_1_2?s=automotive&ie=UTF8&qid=1504300205&sr=1-2&keywords=jescar+power+lock
Beyond that waxing, I would strongly recommend putting in an Amazon order for some Optimum Opti-Clean which is the best waterless wash on the market.
https://www.amazon.com/gp/product/B003CH9KCM/ref=ox_sc_act_title_3?smid=ATVPDKIKX0DER&psc=1
https://www.amazon.com/gp/product/B00GG9FCW0/ref=ox_sc_act_title_2?smid=ATVPDKIKX0DER&psc=1
It will be a pain the first time around but that wax lasts an easy 6-8 months and is better than most detailing shops will give you.
If you have any other questions I'd love to help anymore that I can!
Bear with me here: it’s a bit expensive and hacking two mounts together, but I think this is the best solution.
The Scoche Magic Mount is magnetic and awesome, but it needs to adhere to the interior. No thanks. The Beat Sonic QBF13 is a clip that fits on the passenger side panel and doesn’t adhere to anything, but requires the use of one of their bulky cases that don’t seem too stable.
They actually use the same ball joint to swivel the phone, so I tried just doing that, but t didn’t quite let me swivel the Magic Mount the way I liked. I ended up just unscrewing and pulling the plastic bits off the QBF13, drilling holes in the Magic Mount, then attaching it via the screws that came with the QBF13.
Granted, I basically paid $36 for a small piece of metal and some screws (honestly, isn’t that what all the other mods are anyway?), but I love it and wouldn’t trade it for any other mount.
Scoche Magic Mount:
https://www.amazon.com/dp/B01DBAVFI6
Beat Sonic QBF13:
http://www.beatsonicusa.com/qbf13.html
Installed (sorry it’s dark but you get the idea):
https://imgur.com/gallery/JXp1y
There are 3 different connectors that you'll have to hook up to the connector that comes with the head unit that plugs into the head unit itself. The other 3 connectors are VERY easy to install. 0 electrical engineering education, but common sense and the color coded instructions on the back of the packaging explains all you need to know.
Radio Antenna harness
Main connection (two main connectors that came out of the factory head unit)
USB Connector (if your car came with usb at the bottom right of the center console)
Should mention that the stock AUX connection won't function. You will have to run an extension from the back of the head unit to somewhere in your car. I routed mine to the left side of the passenger seat held up by this thing.
I don't use the microphone for bluetooth so that's not connected. I don't plan on using my head unit for displaying for any video sources so I didn't bother hooking up the hand brake bypass. The GPS antenna I just stuck to some metal plate that was inside the head unit cavity (pretty strong magnet and pretty accurate).
You may want to pick up a bracket like this. to fill in the rest of the head unit cavity along the sides. I'm not too sure if this is the exact one for the head unit. Crutchfield automatically told me what parts I would need to completely setup the head unit including the bracket and connectors. I couldn't find yours on the site so I can't tell you exactly which bracket to get. They're both Pioneer head units so it's worth a try. The bracket is a generic bracket made for most Toyota cavities to support double DIN sized head units. I had to do some slight Dremel work to get everything to line up with the stock mounting bracket. A solid afternoon with everything and I was set by the end of the day.
I had to contact OEM Audio Plus about how to get power to their amplifier because they have a replacement harness for the stock harness. But that's information that doesn't pertain to you unless you own their system with a subwoofer.
Tl;dr: Links 1-3 are what you need to connect everything. Link 4 is some random accessory I bought that happened to work things out. Link 5 is a bracket adapter to the stock bracket. Last link is the site that showed me all the stuff I needed and I just looked them all up on Amazon.
get these towels: https://www.amazon.com/Meguiars-X2000-Magnet-Microfiber-Drying/dp/B0009IQZFM/ref=sr_1_2?s=automotive&ie=UTF8&qid=1497666477&sr=1-2&keywords=meguiars+drying+towel
i know they're kinda overpriced but they're amazing and as long as you dont do something stupid like drop them and keep using them, they dont swirl your clearcoat. theyre quite absorbent too, so soft. 2 of these will dry an FR-S. The first one will be soaked, but is enough to get the beaded water off your finish, then use the 2nd one to mop up.
In terms of wax, that Meguiars Ultimate Paste Wax is amazing. Synthetic so it lasts much longer than carnauba, and ive never had a wax go on and off so easily. Dries in like 5-10 minutes, and buffs right off. I was amazed! Leaves a helluva shine too. I put it on my glass and exterior lights as well.
I did it all myself so that saved money but basically this
1 roll, 2 to be safe. (I got this kit because it was cheaper than buying spools on their own at the time, didnt use the controller from here though you could and save more money. They were on sale at the time for like 15$ or something cheap af)
https://www.amazon.com/gp/product/B004T0BM0O/ref=oh_aui_detailpage_o02_s02?ie=UTF8&psc=1
Extra wiring
https://www.amazon.com/gp/product/B00XFSNKXS/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Bluetooth controller
https://www.amazon.com/gp/product/B00ZQVWU2O/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1
connectors to make life easier
https://www.amazon.com/gp/product/B00G1BYJQS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
splitters to make life easier
https://www.amazon.com/gp/product/B00OMKDUB0/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I wired mine up with switches and whatnot which cost a few extra bucks.
But overall should be able to do it sub 100$ easily.
I just put together a tool kit for my BRZ, and I ended up getting a set of Tekton metric sockets and a Tekton low-profile 3/8s inch ratchet. I've used Tekton quite a bit and I found them to be pretty great. These metric sockets will cover just about everything on the car that can be loosened or tightened with a socket, and since they're deep sockets you can loosen lug nuts with them.
I'd suggest getting a breaker bar or torque wrench if you want to get an additional accessory. The breaker bar is great for loosening tough nuts, and the torque wrench is terrific for tightening a fastener to the exact amount of force it specifies in the manual.
If you really want to go above and beyond, an open ended wrench set (also metric) can be great for when a socket just won't fit. They even make a version with a built-in ratcheting mechanism
In summary, a metric ratchet set that goes from about 8mm to about 20mm is a great gift idea, and you can easily add on other accessories or wrenches if you want to make your gift a bit bigger. I can personally vouch for the Tekton stuff--sure it's not the most expensive fancy set of tools out there, but they look, feel, and work well.
Hope this helps!
Equipment
Must Have Apps
Very excited to be ~95% complete with the install. A couple things left:
More than happy to try to answer questions for anyone else looking to do the same thing. Very happy with the outcome thus far.