(Part 2) Best products from r/genesiscoupe

We found 22 comments on r/genesiscoupe discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 79 products and ranked them based on the amount of positive reactions they received. Here are the products ranked 21-40. You can also go back to the previous section.

30. Cougar Motor LED Headlight Bulbs All-in-One Conversion Kit - H11 (H8, H9) -10000Lm 6000K Cool White CREE

    Features:
  • True 1:1 Size: Extreme 1:1 design of Cougar Motor new generation plug-in led bulb is comparable to of original bulb, without additional wiring harness and drive. To ensure smooth installation, there is no need to worry about modifying the fixed lamp housing, easy upgrade and replace the halogen bulbs instantly.
  • High-brightness Chips: Adopting the new multi-core eutectic technology with 12 high-brightness chips, which can light up to 12000LM brightness. And equipped with 50W high power and 6500K cool white, +300% brighter than the original halogen bulbs. Restore your sight of driving in the daylight, no longer fear driving at night under dim.
  • Comfortable and Durability: Integrated precision aluminum shell and fanless design. H11 LED lights work comfortable and ultra-quiet without any fan hassle and annoying noise. 360° high-efficiency all-in-one aluminum body heat dissipation and IP65 waterproof and dustproof, which ensure a longer lifespan up to 50,000 hrs.
  • Perfect Match Beam: The luminous point of the led bulb is surpass to the perfect effect to the halogen bulbs, you can get the perfect focusing cut-off line and beam pattern without shadow areas and dark spots. The beam projection distance is farther and wider and no blinding or glare to oncoming traffic, ensuring you can driving comfortably and safely at night.
  • Intelligent + Intimate: The exquisite lamp body built-in highly integrated EMC and drive, no radio interference. Intelligent Canbus ready can match 99% of vehicle’s computers. In addition, we not only have high-quality products and rich installation experience, but also provide high-quality 24-hour customer service support. "Note: The filter system may not be 100% accurate. Please check your owner's manual or look at the original bulb model."
Cougar Motor LED Headlight Bulbs All-in-One Conversion Kit - H11 (H8, H9) -10000Lm 6000K Cool White CREE
▼ Read Reddit mentions

Top comments mentioning products on r/genesiscoupe:

u/wrexecute · 1 pointr/genesiscoupe

Beware most of them. They're fine for inside but placing them outside is risky unless you find ones with quality board and construction. These work great in my map-lights and glovebox, but blink like hell randomly in the tag light. I have the same brand of switchback signals like these and they're perfect so YMMV with Grandview lights. YITAMOTOR also makes the T10s similarly, and will blink in the tag. Haven't tried others yet.

u/BloodRaven99 · 3 pointsr/genesiscoupe

Sorry, I've forgotten the exact sizes of the bolts on the ECU & TCU carrier but I do recall that I had to buy this extension to be able to reach the 2x 10mm screws that hold the carrier in place within the engine bay
https://www.amazon.com/gp/product/B00943AKH2

This youtube vid might help you (mind you I got a 2014 2.0t like this vid but it should be relatively the same)
https://www.youtube.com/watch?v=5lMxWcYMI3Y

EDIT: Ok, the video says all the bolts on the carrier and the ECU are 10mm

u/FrankEBones · 2 pointsr/genesiscoupe

The grill is actually this stuff, https://www.amazon.com/uxcell-Balck-Aluminum-Bumper-Rhombic/dp/B072KDHF5J, and the paint I used was from here, https://www.automotivetouchup.com/, which was an exact match. All in all, it was about $80 worth of parts and paint, and a few hours of my time. Definitely better than the M&S grill.

u/CrayAB · 2 pointsr/genesiscoupe

Gotcha. Well hope it gets revolved soon! Car looks great man.

https://www.amazon.com/EPAuto-Portable-Compressor-Digital-Inflator/dp/B01L9WSTEG

I bought one of these bad boys a few years back.. got me out a few jams like yours where I had a small leak causing a flat. Keep it in my car in my "emergency" kit!

u/jacksrdtt · 1 pointr/genesiscoupe

I've been using a magnetic CD mount for the past 6 or so years. I have had to replace it a couple times... But most recently I got one off amazon for 11$

https://www.amazon.com/gp/product/B06Y42RKPF/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

Looks like gone up a couple dollars since, but well worth it IMO. I've hit some big potholes and my phone was still sturdy.

u/hmagg68 · 1 pointr/genesiscoupe

I have an extended arm magnetic mount that rests slightly on the dash to make it stable. Works perfect. Link here to amazon

u/Bazzzam · 1 pointr/genesiscoupe

I love these behind my Lamin-x yellow film. I have to toggle them every time, but it's cool to have the option and I toggle my traction control every time anyway, so I'm used to it.

https://www.amazon.com/gp/product/B01NAJFKNJ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

u/trappez · 1 pointr/genesiscoupe

The OEM rubber mats aren't a bad choice. You can order them straight from Hyundai for about $60. I went through their Amazon vendor. They aren't meant for the 2010, but they still fit. I know because I have a 2010. Genuine Hyundai Accessories U8130-2M100 Front All Weather Floor Mat for Hyundai Genesis Coupe https://www.amazon.com/dp/B008KZK8F4/ref=cm_sw_r_cp_apip_g18VEiEKoGcJG

u/BrewMaiden · 2 pointsr/genesiscoupe

Fog Lights, Switchback LEDs, and the Headlight bulbs a got from a local stereo place. like I stated before, most LEDs run at 6000k so it is likely safe to assume any kind you buy will match the rest of the set up

u/Buzzlightyr · 1 pointr/genesiscoupe

I bought this one on sale at Best Buy. Has Apple car play and Android Auto. No complaints with it so far.

I did install my sub a long time before changing out the head unit and still have the volume knob others had mentioned. Just mounted something like this near my right knee.

u/icharlie0909 · 2 pointsr/genesiscoupe

2010 2011 2012 2013 2014 2015 1pc Genesis Coupe ART of Speed Matt Plain Black Wing Logo Badge Emblem Trunk Grille Lid Tail Gate Kdm https://www.amazon.com/dp/B00MWEZS3G/ref=cm_sw_r_cp_tai_u9zJxb22V92HT.

Sorry for the huge link, don't know how else to share it. And no I didn't buy them in pairs, the one on my trunk is the hollow version.

2010 2011 2012 2013 Hyundai Genesis Coupe Wing Emblem in Flat Black Matte Black https://www.amazon.com/dp/B0091ZHLNO/ref=cm_sw_r_cp_tai_4.zJxbYYV6HTW

Just be careful with the one with wording on it. I had to send mine back and get a new one because the wording was a bit crooked, and I read that I wasn't the only one to receive one like that.

u/MrKingBot · 1 pointr/genesiscoupe

I am currently using these caps from Amazon with my Fanned LED low beams. They work great, and reccomend them so the fans can suck in clean air.
https://www.amazon.com/dp/B07KXXCTJZ?ref=ppx_pop_mob_ap_share

u/Malikj10 · 1 pointr/genesiscoupe

Completely stock.. and yea got he badge on eBay I recommend getting one on amazon [here](2010 2011 2012 2013 2014 2015 2016 1pc Genesis Coupe ART of Speed Gloss Shine Glossy Shinny Black Wing Logo Badge Emblem Trunk Grille Lid Tail Gate Kdm https://www.amazon.com/dp/B00MWEXY4Q/ref=cm_sw_r_cp_api_xsuuybC009WMT) because mine didn't come with the "art of speed" backing I had to order it separate

u/MEatRHIT · 2 pointsr/genesiscoupe

https://www.amazon.com/gp/product/B01N5D0678/

they were like 30 bucks when I had ordered. Might be able to find them cheaper other places by searching for that part number.

u/Wheres_Your_Car_Dude · 2 pointsr/genesiscoupe

Damn that sucks. You could get a lip like this one to cover it up.
https://www.amazon.com/2013-2016-HYUNDAI-GENESIS-BUMPER-SPLITTER/dp/B075NPLQNJ?ref_=fsclp_pl_dp_1

That's what I did when I caught a curb last year. It's not a perfect fix but it should cover that up nicely.

u/Deep_Thought-42 · 1 pointr/genesiscoupe

Just an FYI about those cheap catch cans, they come with really shitty tubing I went ahead and picked up some of this:
3/8" tube size

1/2" tube

I used a good bit of this tube to get the position I wanted, still have to relocate the turbo side one to somewhere besides by the battery it gets way too hot around where I have it.

u/KraddyOP · 3 pointsr/genesiscoupe

The ones that most Genesis owners get are either custom made, or the ones from Amazon.


https://www.amazon.com/Eppar-Carbon-Hyundai-Genesis-2009-2013/dp/B07797H77B