(Part 2) Best products from r/mazda6

Griot's Garage products have served me well. I use their Interior Cleaner and Leather Care Spray. Links are below.

Leather Care Spray: https://www.amazon.com/gp/aw/d/B00469KZY2/

Interior Cleaner: https://www.amazon.com/gp/aw/d/B00IUE5S7I/

Once a month or so, I use the Interior Cleaner on EVERYTHING, then follow up with the Leather Care Spray on the steering wheel, shift knob, and seats.

The part number for the steering wheel is; TK49-32-982A-02, but is something like $200+. This is actually a high-quality cover (not the cheap target covers and will take some time to install) amazon link, but I think it looks really good. Otherwise, like you said you can go aftermarket or get the leather redone by a professional.

https://www.amazon.com/dp/B006FKAHFM/ref=cm_sw_r_cp_api_i_a6FYCbTM1M7VV

I had a bit of free time today and I happened to find it pretty quick.

Heres the dash kit
https://www.crutchfield.com/p_003MAZK860/American-International-MAZK860-Dash-Kit-Painted-silver-black.html

Remember you’re not going to use those side plastic pieces. You’ll have a better fit using the metal ones already on the stock radio

Took a few pics after getting home.

Got the DRL on Amazon. I like them for what I paid, plus they're super easy to install or change if I want down the road. The listing for my exact ones is now a broken link, but here's ones from the same seller that should be pretty close.

I have a 2014 which has very limited options for aftermarket grills.
My understanding is that you have to remove the entire front bumper if you wished to change it so i'm thinking it just isnt a popular mod.

In my search i did see more options for the series 2 so perhaps its easier?
Anyway, im guessing this is closest to what you're looking for.

I ended up getting a mesh cover from Russia and really love it!

$200
https://www.amazon.com/Front-Eline-Replacement-Rotors-Ceramic/dp/B07256W3RN/ref=sr_1_11?ie=UTF8&qid=1511658296&sr=8-11&keywords=mazda+6+brake+kit+2014+rear

You don't have to buy a kit, you can just buy the rotors and get the brakes from Auto Zone for instance. I understand wanting everything all together, I did my brakes on my own for the first time this summer. I'm just putting it out there.

If you do get the kit you listed make sure you follow the break-in instructions to the letter. They'll whistle if you don't. And unless you are doing it for looks or performance I wouldn't get drilled rotors. they are really easy to warp.

This is the air vent one I purchased and have used. It held my Galaxy S9+ firmly without issue and does the same with my S10. I like that it has two grips to hold the vent, and also rotates to a landscape view. I really recommend it.

https://www.amazon.com/dp/B07GQMM65Q/ref=cm_sw_r_cp_apa_i_IqiWCb8AYXDVT

I bought these (https://www.amazon.com/gp/product/B00K61CG5U/ref=oh_aui_search_detailpage?ie=UTF8&psc=1) about three years ago for my 2015 Mazda 6 Touring. It was plug and play. Just needed to remove the wheel well cover to be able to get to all the lights. I think the low beams are H11 and the high beams are 9005. Note that the high beams also act as DRLs and in that mode, there is slight flicker due to its low power. It works fine in high beam mode. I bought the same H11 Led bulbs a year later for my fog lights. These are all working pretty well with no issues since then.

You've got a sport trim, right? Sport from from '10 doesn't have bt, so I'm assuming it doesn't on the '09. I bought this Bluetooth FM transmitter and it works perfectly.

Hey dude I just bought this for my 08 Mazda 6 and it works great. It was on sale for 10 dollars. I remember buying a POS back in 2005 that cost me near 80 dollars and this thing blows it away. https://www.amazon.com/gp/aw/d/B07GJ7DHMP?psc=1&ref=ppx_pop_mob_b_asin_title

I went with this mini 0906. A note about the the fuses: even though the fuse box is designed for mini low profile fuses, I'd recommend not using those, and just use mini fuses (not low profile). This is because there is plastic housing on the fuse box that prevents the fuse from being inserted completely. So the choice between not going in enough with the low profile and sticking out a bit with the non-low profile was easy, as at least the non-low profile felt secure. I used 2 empty fuses for both to make things work, one for the constant and one for the ACC (to enable parking mode). On my 2017 6 GT there were enough open slots to do so, not sure if things are the same with the 2018.

The cx-5 is very similar in the front, so the video is accurate enough for us. Obviously the back will be different, but it's basically just the same as the front for us. You'll need to avoid the airbag in the back too, in the same way as the front. I fished the wire around the air bags first, then routed them through the headliner/pillars (giving plenty of slack to play with). I was about to do things with only popping the a/b/c pillars off ~1 inch at the top edge.

Trunk is the OEM from factory. The roof one is from kingspoiler. It ran about 70 when I bought it. It comes unpainted, if you want to paint it as the photos show you have to use a flexible paint. The spoiler is made out of a flexible material. I left it unpainted.
Amazon link: Mazda 6 4dr Rear Window Roof Spoiler (700814235901) https://www.amazon.com/dp/B00KAHLNTA/ref=cm_sw_r_cp_api_vWmJybPYJA3ZC

Spark plugs diy: https://youtu.be/-SelzJ5YUTA

Cabin and Air filter diy: https://youtu.be/saf1K5_ne18

Cabin filter you need ($8) :
EPAuto CPJ6X (KD45-61-J6X) Replacement for Mazda Premium Cabin Air Filter includes Activated Carbon https://www.amazon.com/dp/B01LWV2W5M/ref=cm_sw_r_cp_apa_i_D5qhDbW5XVH0V

Air filter you need ($15):
ECOGARD XA6280 Premium Engine Air Filter Fits Mazda 3, CX-5, 6, 3 Sport https://www.amazon.com/dp/B00I8IP28G/ref=cm_sw_r_cp_apa_i_M6qhDbKWRM26A

Spark plugs you need ($40):
NGK 94124 ILKAR7L11 Laser Iridium Spark Plug, Pack of 4 https://www.amazon.com/dp/B01DMFGYRC/ref=cm_sw_r_cp_apa_i_F7qhDbM7RD9W0

As promised, here are the links I have bookmarked:

Stock USB Adapter: https://www.carid.com/axxess/retains-oe-usb-adaptor-mpn-ax-mazusb.html?singleid=185736977&url=78716414

Backup Camera Adapter: https://www.crutchfield.com/p_120MAZCM6V/Axxess-AX-MAZCAM-6V-Backup-Camera-Harness.html?tp=3486

Backup Camera Adapter Instructions: https://pdf.crutchfieldonline.com/ImageBank/v20170911125100/Manuals/120/120MAZCM6V.PDF

Antenna Adapter: https://www.crutchfield.com/p_12040HD10/Metra-40-HD10-Antenna-Adapter.html?tp=2569

Trim Kit: https://www.crutchfield.com/p_120957522B/Metra-95-7522B-Dash-Kit.html?tp=3121

Dash disassembly (CX-5 is identical to 6): https://www.youtube.com/watch?v=aoncFAELsDQ

Wire Harness: https://www.carid.com/metra/aftermarket-radio-wiring-harness-mpn-70-7903.html?singleid=4732120&url=78716414

Maestro RR (Steering wheel control adapter): https://www.amazon.com/ADS-MRR-Maestro-RR-Universal-Replacement/dp/B00E4W1644

Guide by someone who has done this before: https://www.mazda6club.com/threads/2014-m6gt-pioneer-mvh-2300nex-install-w-bose.434058/

Reverse wire location: https://www.mazdas247.com/forum/showthread.php?123840216-2014-mazda-6-reverse-sensor-wire-found-looking-for-VSS-wire-anyone

My Headunit: https://www.kenwood.com/usa/car/navigation_multimedia/ddx9703s/

You might look into this. I saw it browsing Amazon, and according to the seller it should fit.

https://www.amazon.com/dp/B07FPWV3KG/ref=cm_sw_r_cp_api_i_8HtnDbXDCG02G

I got some 303 aerospace protectant wipes like these:

https://www.amazon.com/gp/product/B00KMYYTD8/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1