(Part 2) Best products from r/onewheel

Master List of aftermarket companies for OW upgrades that all should know about.

https://float-supply.com - Float plates, footpad, sidekicks, tires, bearing, fender, stands, protective gear, apparel, etc.

https://www.flightfins.com - Fins, fender, FF tires, extended rails, FF plates, apparel, etc.

https://craftandride.com - everything (usually carries items from other sites so this list would be extensive, check them out)

https://owarmor.com - cobra pads, concave front pad, reflective rail wrap, sidewinders, protective gear, etc

https://land-surf.com - fangs, bone-flex handle, battery holster, light fender, etc.

https://www.prorideusa.com - traction pads

Instagram: NJcustom - carbon custom fenders (original magnetic fender) (different curvature than Craft and Rid)

http://float365.club - custom reflective rail wraps, stickers, apparel (can give you any look for your rails)

https://eight2ten.com - custom rail guards, custom grip tape, grind plates, etc.

https://www.elitecustomsow.com - reflective rails, aluminum plates, stickers, etc.

Amazon: XLR female Noise Reducing Caps - PTFE (Teflon) Insulation - Nickel Plated - Pack of 2

https://www.badgerwheel.com - water protection, snow traction cover, bearing cover, etc.

https://eliteinnovationsllc.com - Recon rails, flight fin extenders

https://1wheelparts.com - full custom rails, custom plates, custom stands, custom fenders, tires, etc.

20michael08@gmail.com (Michael Broussard) - metal custom anodized rails guards, plates, stands, and custom made parts.

https://www.facebook.com/PinkOakOW/?ti=as - Custom rail guards.

http://flexfender.com/product/flex-pad/ - Frontpad soft concave pad

https://www.fishbones.life - frontpad concave add-on

https://www.electricbigfoot.com - front concave pad that layers above sensor.

https://carvepower.com - battery + collabs (kush pad)

https://carbon-smith.com/shop?olsPage=t%2 - Frontwheel detachable handles, wheels, bumpers with handles and wheels

www.sonnywheels.com - extended battery mods (VNR / PNR) for all models + OW jewelry +

http://gofullsend.com - FF extender and Go full send system

https://two-x.com - OW Plus battery extension modification.

https://buckwilders.com - Tires + extras

https://armor-dilloz.com - Tire Sealant + stainless steel plates

https://plugbrush.com - multipurpose power cover

power plugs - Etsy shop

https://www.etsy.com/ca/shop/3Dway - High quality Pint 3D printed accessories.

https://www.amazon.com/dp/B07WGFZ39F/ - OW mounted carrying sack

www.stokebutter.com - OW apparel.

Float One Love Shirt - apparel

http://leehweno.com - jokes

(Some of these sites also have tires, clothing, and other upgrades to check out)

Also should check out what users have created to 3d print for OW


Please add if you know if others

Vihir Adult Water Sports Skate Bike Helmet - Multi Skating Skateboard Scooter Surf Men Women Dial Helmet https://www.amazon.com/dp/B072V7XB2Y/ref=cm_sw_r_cp_apa_i_qfKsDb64N1KA7

I friggin love this helmet! Softer padding and super comfortable! Prob sacrifice a little protection but I actually like wearing it unlike my triple 8 that was hard and actually hurt to wear! GL. Hope it helps

Just barely fits...but it fits!! This is a beefy lock and I’m very happy with it. 8/10 security rating and a $3000 Anti-theft offer (whatever that means) Gold rated bike lock. The rubberized coating makes it a little tricky to get it to fit. I needed to push it down through the wheel while rotating it so it would slide down passed.

I will only be using this lock to lock it up in my office while I’m working. Don’t leave your Onewheel unattended in an area that isn’t somewhat secured. If you’re looking for a beefy lock that actually fits the Onewheel Pint

https://www.amazon.com/dp/B07CBK48XN/ref=cm_sw_r_cp_apa_i_qKnYCbYTY38F0

And he's right, it's awesome. I didn't even use the roller they say you need.. Still works amazing

i got these for wrist guards. ive taken 2 falls (3 counting tripping at the top of the stairs) and each time they really saved me.

https://www.amazon.com/gp/product/B00BFPH19M/ref=ppx_yo_dt_b_asin_title_o07_s01?ie=UTF8&psc=1

​

but then i ordered this entire set for the same price...cause i wanted one elbowpad.

https://www.amazon.com/gp/product/B01HI1613S/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

​

and and they come with a similar style wrist guard, but feels lower quality, but still provide the same area of coverage. so you can probably just get that second set.

​

and for the helmet, there are so many around the same price point.

the only reason i chose this one was cause of that slight little brim in the front of it hah

https://www.amazon.com/gp/product/B07CWMGQC5/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

​

but its been comfortable and my dome feels well covered

Here's my routine. Should I do anything else?

​

I just clean off all the debris around the wheel and the board with a basic snow brush like this.

​

https://www.amazon.com/Mallory-532-Integrated-Scraper-Handle/dp/B000BPLNXC/ref=sr_1_4?crid=2HU6FZCEDUJV&keywords=snow+brush&qid=1562084249&s=automotive&sprefix=snow+%2Cautomotive%2C247&sr=1-4

​

And let the board air dry on a basic rug like this.

​

https://www.amazon.com/MAYSHINE-Non-Slip-Machine-Washable-Absorbent-Microfibers/dp/B071QXGNJG/ref=sr_1_41?keywords=bathroom+rug&qid=1562084402&s=gateway&sr=8-41

I don't think you'll find any actual counterfeits on Amazon. They probably just mean don't buy something like this.

I'm guessing they don't sell on Amazon because the margins would suck. The suggestion about cashing out your Amazon credit to a gift card was a good one.

The Ryobi is a very useful multipurpose tool, and I have one, to inflate car tires and balloons for kids' birthday parties and air mattresses and rafts and inflatable pools and soccer balls.

If you JUST want something for your OW, I suggest something smaller, that you can throw in your backpack if you want. I have this:

https://www.amazon.com/gp/product/B019FIERRO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

There are similar, and similarly-priced models on Amazon that have even better reviews than that one (though I've had no problems at all with mine).

I recently purchased this cleaner: https://www.amazon.com/dp/B00AJW0CY8

I was able to clean dirt and mud from my grip tape in around 10 minutes and make it look like new ;)
For $9.5 you will get probably like 20-30 through cleanups of both pads.

POWERTEC 71002 Abrasive Cleaning Stick for Sanding Belts & Discs Natural Rubber Build | For Woodworking Shop Sanding Perfection | A"Must Have" Sanding Accessory https://www.amazon.com/dp/B00AJW0CY8/ref=cm_sw_r_cp_api_i_eSVSDb217ERJ1

Get this, you will never use all of it and it’s only 10$

I was wondering - can you charge an XR a few times with a solar panel like this one https://www.amazon.com/dp/B07FH85FW9?psc=1&pf_rd_p=e5769fff-2926-4753-918b-93331cd26e61&pf_rd_r=BXWWRP2RMF6CEPVT3CAB&pd_rd_wg=lkT27&pd_rd_i=B07FH85FW9&pd_rd_w=yaefb&pd_rd_r=e16bbf20-f72f-488c-8a7d-d497fdee0a8c&ref_=pd_luc_rh_crh_rh_bxgy_03_01_t_img_lh

​

and a battery like this?

https://www.amazon.com/gp/product/B07NS7F1FW/ref=crt_ewc_title_dp_1?ie=UTF8&psc=1&smid=AZF6YB7UVA7OU

​

I may be taking Burner Express so don't really want to deal with getting a gas generator and a gas tank off and on the bus.

Thousand helmet and Hillbillys FTW.

https://www.explorethousand.com/collections/thousand-products?gclid=EAIaIQobChMIoIXZnrjl5QIVMCCtBh0WxAraEAAYASAAEgLHp_D_BwE

​

https://www.amazon.com/Hillbilly-Wrist-Guard-Gloves-Finger/dp/B0046F2I5K/ref=pd_sbs_468_t_0/137-2591588-9703326?_encoding=UTF8&pd_rd_i=B0046F2I5K&pd_rd_r=6a7f0511-968f-434a-8182-1c3e9fbc3d13&pd_rd_w=eTWD1&pd_rd_wg=xHRQF&pf_rd_p=5cfcfe89-300f-47d2-b1ad-a4e27203a02a&pf_rd_r=DQ58PE249B1GBEJ69CWH&refRID=DQ58PE249B1GBEJ69CWH

I went with this from TireJect when I got my FF Hoosier after scouring the web for a couple hours. It came highly recommended from a specialty ATV blogger with no affiliation with the brand. It's only 4 ounces and is supposed to be better than Slime (and everything else) pretty much across the board for a sealant meant to last the lifetime of the tire, as many slime knock-offs and other automotive tire sealants are meant to be only temporary solutions before tire replacement/repair. I've yet to pull any nails out but if ATVs can handle it, we can too. https://www.amazon.com/gp/product/B07L24ZMK1

i keep two hands on the bars and run the leash between my fingers and the bar, so i can pull her back in, but if she ran around a pole the leash would slip off. she is only 35#, but if she were 80 i would not do this for fear of being pulled over.

​

You might also check out a [springer](https://www.amazon.com/Springer-Dog-Exerciser-Biking-your/dp/B0017NM4OE/) it keeps your hands free and absorbs shock from the dog pulling. does a great job. i just got lazy trying to adjust it so i dont use it much but its on my todo list to get it set up again.

Triple8 Baba..
Tried and tested...
Won’t regret it...
I m 5.10
185lbs,
And I usually like to put elbow and knee pads over my clothes so after few good returns of different pads I would recommend u this...
Triple Eight Saver Series Pad Set... https://www.amazon.com/dp/B002WTUY7G?ref=ppx_pop_mob_ap_share

FIGURED THIS OUT: 3m Spray Adhesive Super 77 is the fix for this. Even after Jeff @ FloatLife generously sent me replacement set they continued to pull back and lose adhesion at the ends after many bails but the 3m spray is a easy cheap way to keep your sidekicks alive, no need to cut the ends.

https://www.amazon.com/3M-Multipurpose-Permanent-Adhesive-Cardboard/dp/B01MFA2EEE/ref=sr_1_4?crid=VKKPJP2F32N5&keywords=3m+spray+adhesive+super&qid=1570644597&sprefix=3m+sp%2Caps%2C203&sr=8-4

I personally would recommend a helmet that complies with U.S. CPSC Bike and ASTM F-1492 Skate safety standards, so you can use for both. I got myself a Triple Eight Gotham. There's a version with MIPS and another without.

https://www.amazon.com/Triple-Eight-Gotham-Rubber-X-Large/dp/B00JS6XVK8/

No store near me had any kind of thread repair kit that was smaller than a sparkplug. So I ordered https://www.amazon.com/gp/product/B002KWFRHM/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 and chose to keep it SAE #10-32. So, effectively it will like factory except stainless steel rather than soft @$$ aluminum. FM really ought to be putting these inserts in at the factory!

Considering one can get a squished hoverboard for a third the price of a pint, you're not wrong.

Similar thing happened to me and someone suggested the 3m spray on adhesive


3M Super 77 Multipurpose Permanent Spray Adhesive Glue, Paper, Cardboard, Fabric, Plastic, Metal, Wood, 13.44 fl. oz. https://www.amazon.com/dp/B01MFA2EEE/ref=cm_sw_r_cp_api_i_pGAFDbW4103NE

please add https://www.amazon.com/dp/B07WGFZ39F/

I picked up one of these digital inflaters for accurate pressure in my wheel- it has a battery for on-the-go use and works quite well for $45:

Fineed Portable Air Compressor... https://www.amazon.com/dp/B019FIERRO?ref=ppx_pop_mob_ap_share

Triple Eight Gotham Dual Certified Skateboard and Bike Helmet, Black Matte, Large / X-Large https://www.amazon.com/dp/B00JS6XVK8/ref=cm_sw_r_cp_api_i_dR4kDbNWX5PDF

>this one? https://www.amazon.com/Hillbilly-Wrist-Guard-Gloves-Finger/dp/B0046F2I5K

POWERTEC 71002 Abrasive Cleaning... https://www.amazon.com/dp/B00AJW0CY8?ref=yo_pop_ma_swf

Been using this works great. Little elbow grease and one of these and the tape will be looking brand new.