Best products from r/paint
We found 12 comments on r/paint discussing the most recommended products. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 10 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. HomeRight C800971.A Super Finish Max Extra Power Painter, Home Sprayer HVLP Spray Gun for Painting Projects, Multi
- PAINT SPRAYER FOR COUNTLESS DIY PROJECTS: The HomeRight Super Finish Max paint sprayer offers the ultimate DIYing experience. It’s great for applying a great finish on small to large projects like fences, decks, furniture, cabinets, dressers and more.
- ADJUSTABLE SETTINGS TO SUIT ANY PROJECT: You can adjust the air cap to spray horizontal, vertical, and round. You can also adjust the material flow control knob to quickly increase or decrease the material output
- MORE POWER=SPRAY MORE MATERIALS: Offers 450 watts of powerful spraying experience. It sprays a wide variety of paints and stains such as chalk type paint, milk paint, latex paints, enamels, primers, clear sealer, polyurethane, stain and varnish
- 3 BRASS SPRAY TIPS: Brass spray tips offer superior performance over plastic counterparts. Use the 4.0mm (red) tip for primer/latex paint, 2.0mm (green installed on sprayer) for latex and chalk paint, and 1.5 mm (blue) for stains and sealers.
Features:
2. Wooster 1832/1831 Painters Brush Comb
- 2 Side Painters Comb
- Non-Rusting Brass Bristles Gently Remove Heavy Paint Buildup
- Stainless Steel Comb Has 12 Pins To Speed Wash & Rinse Steps
- Also Reshapes The Paint Brush Prior To Storage
- Two-sided tool improves paintbrush cleaning
- Non-rusting brass bristles gently remove heavy paint buildup
- Stainless steel comb has 12 pins to speed the wash and rinse steps and can help reshape the paintbrush prior to storage
- Durable polypropylene handle
- Overall 8 1/4-Inch length
Features:
3. Rust-Oleum 261845 EpoxyShield Garage Floor Coating , 2 gal, Gray
- Durable, 2-part epoxy formula works on interior concrete surfaces, such as garage floors, workshops, basements and more
- Professional glossy finish is easy to clean and provides a long lasting protection that is 5X harder than 1-part epoxy floor paint
- Walk on ready in 24 hours, vehicle and drive-on ready in 3 days
- Superior adhesion coating ensures no hot tire pickup and protects against gasoline, antifreeze, motor oil, and salt
- Low odor, low VOC gloss finish provides a show room shine
Features:
4. Aqua Coat, Best Wood Grain Filler. Clear Gel, Water Based, Low odor, Fast Drying, Non Toxic, Environmentally Friendly (Pint)
- DESIGNED WITH EVERYONE IN MIND: From the DIYer to the contractor this is the perfect product to fill the grain and seal the pores of wood before or after staining or on raw wood to get a smooth finish on oak, ash, mahogany, walnut and other porous woods. A favorite product for tabletops, desktops, cabinets, vanities, millwork, pianos, guitars and furniture refinishing. For that glass smooth finish, start and finish all your hard to fill wood projects with Aqua Coat.
- WATERBORNE AND ECO- FRIENDLY: Our entire line of products are MADE IN THE USA, low VOC, low odor, non-flammable, non-combustible, water-based fast drying, easy to apply, easy sanding, excellent adhesion, water clean up, environmentally friendly. This makes it the healthier option for your employees and your family. Achieve that beautiful glass smooth finish while keeping the environment and your health in mind.
- VERSATILE AND COMPATIBLE WITH OTHER PRODUCTS: Filling your wood grain before you stain not only creates that beautiful smooth finish you are looking to achieve it will also seal the pores and help minimize absorption of your top coat, saving you time and money. Aqua Coat Clear Grain Filler can be mixed with water soluble pigments/dyes.
- EASY TO USE- Work the Clear Grain Filler generously into open wood grain and pores against the grain with a small squeegee, bondo blade, old credit card, or fingers with a glove. Scrape off excess with a squeegee, bondo blade, or an old credit card with the grain. Let dry 45-60 minutes. VERY lightly sand with a 320 or higher grit sandpaper or a fine scotchbrite sanding pad immediately before your next application of grain filler. 2-3 coats are recommended.
- LONG LASTING- A little goes a long way. You can use one quart to do 2 coats on a medium sized kitchen (30-40) drawers and doors, or one pint to use on 5-6 guitars.
Features:
5. Carhartt Legacy Tool Roll, Carhartt Brown
Tool roll made of rugged synthetic material with Rain Defender durable water repellent for protecting and organizing tools19 slots for various size tools; 3 small parts pockets with hook and loop closure for small tools or utility itemsDual side release buckle closure and top haul handle for conveni...
6. STANLEY PTST03508 8 Piece Paint Kit, TAN
- EASY AND EFFICIENT: STANLEY Paint Roller Covers are manufactured with high-density fabric which holds a large amount of paint and releases it evenly for a fast finish. A sturdy solvent resistant core provides easy cleaning and reuse.
- THE BEST IN BRUSHES: STANLEY Paint Brushes are designed for the professional painter or do-it-yourselfer who expects the best results. From baseboards to furniture STANLEY brushes make work and projects easier and more enjoyable.
- ALL IN ONE SET: STANLEY paint kits are designed to perform well with all paints and have superior performance with today’s low VOC and paint and primer in one. Microfiber rollers paint with smooth lint free results combined with brushes or other accessories so you can start the job off right.
- PERFORMANCE IN ACTIONS: Since 1843, we’ve set the standard for excellence in everything we do. No company on earth has a stronger or more compelling history of delivering the hardworking, innovative, powerful tools that help professionals around the world build, repair, and protect the world’s most valuable objects.
- PRODUCT SPECIFICATIONS: Package contains (1) STANLEY Home Paint Kit - 8 Piece. Kit contains 9” sturdy roller frame, (2) 9” high capacity roller covers, 3” trim frame, 3” high capacity trim roller cover, 2” trim brush, heavy metal tray, and plastic tray liner.
Features:
7. Purdy 144152725 Pro-Extra Glide Angular Paint Brush, 2-1/2 inch
- Pro-Extra Glide Nylon/Polyester/Chinex Brush Angle Sash
- Use with all paints
- Extra length out and thickness of the filaments provide extra wear and paint-holding capacity
- Angular trim and fluted, natural hardwood handle
- Round edge, stainless steel ferrule
- Handcrafted in the USA
Features:
8. Bon 15-319 Professional 3-Inch by 14-Inch Blue Steel Taping Knife with Contoured Poly Handle
- Country Of Origin: Taiwan, Province Of China
- Package Width: 34.544 Centimeters
- Package Height: 3.302 Centimeters
- Package Length: 21.59 Centimeters
Features:
9. Wagner 0529021 FLEXiO 890 Stationary HVLP Paint Sprayer, Sprays Unthinned Latex, Includes two Nozzles, iSpray Nozzle and Detail Finish Nozzle, Complete Adjustability for All Needs
PERFECT FOR A VARIETY OF PROJECTS: The FlexiO 890 paint sprayer is great for applying a superior finish on furniture, walls, ceilings, cabinets, trim and morePORTABLE PAINT SYSTEM: The turbine sits on the ground, keeping the weight on the floor and reducing hand fatigue for long projects. It then de...
Yes I'm a novice painter. I've done a few rooms in my home. The garage has been the largest project so far (just finished the walls which needed quite a bit of spackling and re-taping). I'll look at that solution you suggested and let you know if I have any questions. I appreciate the response, thanks!
edit
ok i looked at this on Amazon and read the popular reviews (link: https://www.amazon.com/Rust-Oleum-261845-EpoxyShield-Garage-Coating/dp/B006ZUZ9QE). One question I still have is the power washing. Should I tape plastic drop cloths to the walls so I don't ruin them with the power washer? I can't see how I could possibly power wash inside the garage without soaking the drywall. Also, i have a water filter in the garage with a boot that sits on the floor. Removing this thing is not trivial. I need a plumber if I were to do that. Would I be able to go around it knowing that one spot on the floor will be old/unfinished? I may be able to put a neat square around it or something. What would you recommend for something like that?
The rest seems pretty straight forward (thought a lot of work) based on the first reviewers instructions. I think I can tackle this when the weather warms up.
My only concern is that the negative reviews say this stuff tends to come up after a few months, especially if tires go on it. Have you had any experience with this? Do you know why this might be happening for them?
Oak grain filler for cabinets. People use this but there are others available too. The best thing to do is test your process on one or two doors first and see if your system works. Cabinets are all about the prep work. Good luck!
I carry mine in a plastic bread bag, haha. It happens to be a good size for 2-4 brushes on the go. I’ve always thought about a tool roll type thing though. Or similar to a chefs knife roll. Carhartt makes a tool roll
Thank you much for this advice. I am reading him all these comments. I hadn't known about skin injection. That doesn't not sound good.
Hey, would skin injection be a problem with a sprayer like this? This isn't a high pressure sprayer right?
https://www.amazon.com/HomeRight-C800971-Painter-Painting-Projects/dp/B071X9FZ7R/ref=sr_1_1?crid=3LA8KMD06TAVN&keywords=homeright+super+finish+max+paint+sprayer&qid=1567987497&s=instant-video&sprefix=homeright+super+finish+max%2Cinstant-video%2C177&sr=8-1
use soapy water and a wire brustle brush/brush cleaner to brush out dried paint and rinse until water is clear https://www.amazon.com/WOOSTER-BRUSH-1831-Side-Painters/dp/B000LDLPC8/ref=sr_1_1?keywords=wooster+brush+cleaner&qid=1567717325&s=gateway&sr=8-1
Thanks for the detailed reply!
/r/travtele844 , what do you think of this kit?
Gitcha one of these.
https://www.amazon.com/15-319-Professional-3-Inch-14-Inch-Contoured/dp/B000L3LWDK/ref=mp_s_a_1_4?keywords=taping+knife+14+inch&qid=1566064783&s=gateway&sprefix=taping+knife+14&sr=8-4
This is my daily latex driver
This is a possibility.
Wagner Spraytech 0529021 Paint Sprayer, Flexio 890 https://www.amazon.com/dp/B00IA8EVIQ/ref=cm_sw_r_cp_tai_FcaMDbJW21YD6
You could try using something like a deglosser, but I'd be wary of the finish you would end up with. And there is always the potential of damaging the fabric.
The paint is fully cured, right?