Reddit mentions of Pure Citric Acid, 5 Pound - Food Grade & Non-GMO- Natural Food Preservative, All Purpose Cleaning Agent, Beauty Ingredient- by Spicy World

> You put lemon juice and/or 'Fruit Fresh' (powdered citric acid

...or if you're like me, you buy a 5lb bag of citric acid powder ridiculously cheap and then get Looks of Disapproval from the wife because now we have a 5lb bag of citric acid taking up cabinet space. But it was so cheap!

You can buy citric acid on Amazon and coat anything* to become a 'sour' verison.



^^^*Don't ^^^put ^^^it ^^^on ^^^or ^^^in ^^^your ^^^penis

Considering citric acid is in citrus fruits you could likely just use lemon juice. A small enough concentration that it won't affect the taste.

Or you could buy a 5lb bag of citric acid in powder form from Amazon and dilute it yourself. http://www.amazon.com/Spicy-World-Citric-Acid-5-Pound/dp/B000OZFECU

I get zero residue on my dishes. The recipe I use calls for citric acid, which really helps to get rid of that residue. I bought a giant bag of it on Amazon for pretty cheap, though honestly I didn't need to buy that much - the recipe I have only calls for 1/2 cup at a time, and each recipe lasts for several months.

Use citric acid instead. No funky smell or foaming to worry about. $20 for 5 pound may be a bit expensive initially, but you only need a couple tablespoons each time so it'll probably last you a lifetime. It's exactly what's inside these.

$1.97 for 7.5 oz is $4.02/lb.

If you wanted to buy from Amazon you can get 5lbs @ $2.98/lb and not have to worry about finding it in stock.

(not trying to criticize you - just wanted to provide a link that may be helpful to others)

http://www.amazon.com/Spicy-World-Citric-Acid-5-Pound/dp/B000OZFECU/ref=sr_1_1?ie=UTF8&qid=1397684913&sr=8-1&keywords=citric+acid

Just saw this pop up on Slickdeals. Citric acid, which a lot of people have been recommending around here for hard water to help build a better lather. I can't comment on its effectiveness since I've never bothered to try it, but figured I'd throw it up on here in case anyone is interested, since it's apparently .30 cheaper than last time it went frontpage: https://www.amazon.com/gp/product/B000OZFECU/

https://www.amazon.com/gp/aw/d/B000OZFECU/

I really need some citric acid to finally start making bath bombs, but I'm afraid that it's too expensive (around $20) so I also need these storage containers for making yummy lip balms.

Yeah, the only difference is that I used the Fluval diffuser. The glass diffuser is a lot more fragile - I dropped mine and it shattered. The Fluval one is a clunky piece of plastic, but holds up well. I've been re-evaluating my setup and will be replacing my DIY system with something more robust. Before I get into why, let me go share some advice with they DIY system...

 

First off, I'd also get a check valve. This will prevent siphoned water to back up into your CO2 setup. There are bubble counter/check valve combinations, even a diffuser/counter/check valve combo.

I haven't purchased these, so I can't comment on the quality. I will say - I purchase most if not all my supplies from Amazon with great success. I always buy the least expensive equipment. Most of it I can tell comes from China, but the quality is still pretty good - it gets the job done.

 

Second, the DIY setup is good, but does not last. The DIY kit you can get on Amazon is awesome - fits right on any standard soda bottle and has a nice needle valve and pressure gauge. My problem is durability, the setup I used to create the tank I have in the picture has recently broken down. The pressure gauge ripped off (because the tubing wore down) and although I tried to reattach and seal it, there was a slow leak that I wasn't willing to try and repatch. This is the second DIY kit I've broken, they both broke at the tubing piece that connects the gauge and the bottle cap. The main reason why it breaks down is because I shake the shit out of those bottles to stir up the Baking Soda and/or Citric Acid. I never really paid attention to the pressure gauge flopping to and fro, but now I realize that after enough "fros", the tubing worn down until it tore off. So if you stick with the DIY setup, try to either not shake it like a polaroid picture - or hold the pressure gauge steady.

 

The DIY system is cool because it makes you look like Walter White and also provides a "cheap" way of getting CO2 into your tank. All you have to buy after you have your setup is Baking Soda and Citric Acid. Baking Soda, I get at Costco for cheap and is so big it will last forever. Citric Acid - I haven't really looked in depth at purchasing local - but Amazon sells these 5lb bags for $15. I think it's the best deal on Amazon. I've only bought two bags total (I tried it in my 75 gallon tank - STUPIDEST IDEA EVER - but that was when I was really new to the hobby). I'd say for a 5-10 gallon tank, 1 5lb bag of Citric Acid should last you for maybeee a year - depends on your bubbles per second obviously.

 

One major con I have for the DIY system besides durability is that it's all manual. Sure - you can figure out how to rig up a solenoid of some sort and what not to get it on a timer- but seems like more trouble than it's worth for a DIY system. I let my CO2 run 24/7 which isn't ideal - but as the picture above clearly shows - it works. The other downside of it being manual is that baking soda surprisingly doesn't mix all the way with water. So when you introduce it to the citric acid solution (which mixes well with water) - the entire reaction may not occur until you shake it and baking soda then reaches the citric acid. Having to periodically check my CO2 system isn't terribly difficult, especially if you chose the DIY setup to save money - but sometimes if too much citric acid is transferred into the Baking Soda side - a fuckton of CO2 is created and now either is pumping into my tank or my soda bottles look like they're ready to explode. I will say - this has happened to me very rarely. I've seen my soda bottles build a lot of pressure before - but never bursted. So it's not the end of the world, just an unexpected inconvenience.

 

The other major con I have is refilling. Sure refilling doesn't take that long, empty the neutral baking soda/citric acid solution and add a the the right amounts of the new solutions in. But after doing it so many times - I'm kinda tired of it. I sometimes have extra soda bottles at the ready with the solutions and unscrew the old ones and pop in the new ones. Good plan, but still takes time and effort.

 

If you're careful not to shake the tubing of the pressure gauge, content with either having CO2 run 24/7 or manually turn it on and off AND are willing to periodically refill soda bottles, then I'd say give the DIY system a shot.

 

I chose the DIY setup when I first started the hobby and wasn't sure how dedicated I would be. Also - I didn't have a great paying job that would warrant me paying more for a convenient/foolproof CO2 setup.

 

Which brings me to what I plan on doing now. Now that I'm more interested in the hobby, I've decided to step my game up. For starters, I have a 75 gallon tank rigged up to a 20 lb CO2 tank that I have to refill every 3-4 months. I live by a small hydroponics shop that refills my CO2 tank for $20. I don't know if $20 is cheap, but the store is close, convenient and gets the job done. I also attached a $40 solenoid to it so I could connect it to a timer. This setup has been AWESOME. Very simple, and 100% reliable. I just take my empty 20 lb tank to the store and get it filled and plug it back into the solenoid.

 

Because my 20lb CO2 tank setup has been so successful in my 75 gallon, I've decided to do something similar for my 5 gallon. While a 20lb CO2 tank is complete overkill - there are pretty good alternatives out there. I've looked at using the Fluval 20G CO2 kit and using Threaded CO2 Bike Tire Cartridges. The diffuser that comes with the Fluval system is huge and I would never use it. So basically I'm paying $30 for a regulator that can't even easily attach to a solenoid. Also those 16g bike tire cartridges seem small and wasteful. So your costs are $30 for the setup and ~$30 for the CO2 cartridges - which who knows how long those last. The main benefit to this setup is that it's super small. This seems like a good setup for sure and was very close to going for it, but I've decided to go with something else.

 

I'm buying a 24 oz Paintball CO2 tank ($25) , a CGA 320 Adapter (CGA 320 is the size of the standard CO2 tank threading) ($10), and a regular solenoid ($40). The prices seem reasonable except for that CGA 320 adapter piece. $10 for a piece of metal. Unfortunately, I couldn't find the same piece at Home Depot or Lowe's and I'm also lazy. So I'd rather pay the $10 then figure out how to jerry-rig my own. The adapter allows the threading of a Paintball tank to connect with the threading of a standard CO2 solenoid. Considering the Fluval setup is $60, I'd say this $75 paintball setup is worth it - especially since it now has a solenoid! The main difference is CO2 refill. Dick's Sporting Goods (also local for me) refills 24oz paintball CO2 tanks for $5 and every 5th fill is free. I think 24 oz will last me a long time anyway. In any case - I think the main obstacle whether it is using a 20lb CO2 tank or using a 24oz Paintball tank is where you're going to get that CO2 filled. You can search for a local Airgas or like a place that sells/refills Fire Extinguishers. Bars use CO2 as well for beer - but you don't need food grade CO2, that's just overpaying.


 

I know I went a little overboard, but this is all information that I've recently researched and figured I'd share it. I can't comment on the performance on the paintball tank setup just yet, but I assume it will work fine.

 

TL;DR DIY systems are cheap and good, but not 100% reliable/consistent and must be manually turned on/off/. You may or may not marry a woman named Skyler White during the process. Major costs are $15 for DIY rig, $15 for a 5lb bag of Citric Acid. I'd recommend using a 24oz Paintball CO2 tank because they can attach to a solenoid and are reliable and consistent. Major costs are $25 for a 24oz Paintball Tank, $10 for a CGA 320 Adapter, a $40 solenoid. $5 fill ups at Dick's Sporting Goods.

It is super cheap, but any way you do it, you're going to need a lot of acid. You could probably just make a smaller amount and just use a ladle or something to make sure all surfaces stay wet