Reddit mentions: The best aquarium decor tank dividers
We found 17 Reddit comments discussing the best aquarium decor tank dividers. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 7 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Ioffersuper 4 Pcs Grid Divider Tray Egg Crate Louvre Aquarium Fish Tank Bottom Isolation,Black
- Size is 10mm;The size of aquarium filter grids is 30*15cm/12*6inches.
- Our fish tank dividers and supporty feet are made of High Quality plastic.
- perfect for all types of freshwater and saltwater aquarium.
- Isolate fish,build platform,bottom filter.
- Package:You will get 4pieces black aquarium separation grids.
Features:
Specs:
Color | black |
Weight | 0.220462262 Pounds |
2. 20 Gallon Aquarium Divider with Suction Cups - Fish Tank Divider Perfect for Betas
- 20 gallon fish tank divider ONLY! (Does not include aquarium). Approx 12in x 12in. Please measure your tank before purchasing!
- Suction cups that attach divider on top and bottom of aquarium
- Pins that hold mesh and side/top rails together
- Seperates aggressive fish, breeding fish or fry
- Seperates fish without extra filteration or heaters needed
Features:
Specs:
Height | 2.48 Inches |
Length | 12.72 Inches |
Size | 20 Gallon Long |
Width | 3.39 Inches |
3. 4X Aquarium Fish Tank Plastic Clips Glass Cover Strong Support Holders 10mm
4. Ioffersuper 4 Pcs Grid Divider Tray Egg Crate Louvre Aquarium Fish Tank Bottom Isolation,Mix
Made of food-grade plastic material, environmental protection won't affect water quality.This item can cropped and free splice combinationEffectively separate the fish and avoid bites each other.Size: 30cmx15cm/11.8"*5.9"Package includes: 2 Pcs fish tank bottom isolate
Specs:
Color | mix |
5. Lee's AQ2 Aquarium Divider System for 10-Gallon Tanks
- Divider size: 10-inch by 12-inch
- Fits most 10-gallon aquariums
- Maintains overall heat circulation and unobstructed filtration
Features:
Specs:
Color | Multi-colored |
Height | 12.625 Inches |
Length | 4.5 Inches |
Number of items | 1 |
Size | 10-gallon |
Weight | 0.31461538461538 Pounds |
Width | 1.5 Inches |
6. toyuto 22.8" x 22.8" 120 Gallon Fish Tank Acrylic Divider Aquarium Isolation Board (Suction Cup No Included) (120 Gallon, Clear)
<p><b>perfect fit the US standard 120 Gallon tank size 22.8" x 22.8" </b></p><p><b>Easy maintenance, easy to clean, soft cloth scrub</b></p><p><b>perfect light transmission, up to 92%</b></p><p><b>excellent resistance avoid yellowing and hydrolysis due to years</b></p><p><b> Divider need suction(Not...
Specs:
Color | clear |
Size | 120 Gallon |
7. Alfie Pet - Comi Hang-on Nursery Fish Tank with Isolation Breeding Hatchery
This nursery fish case measures: 8" long; 4" wide and 4" high.Ideal as maturation tank for fry, or isolation tank for aggressive or injured fish.Removable center divider allows two fish to be safely isolated.Space saving design that hangs on the inside of the aquarium.Please remove the protection fi...
Specs:
Height | 1.6 Inches |
Length | 11 Inches |
Weight | 0.2 Pounds |
Width | 5.7 Inches |
🎓 Reddit experts on aquarium decor tank dividers
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where aquarium decor tank dividers are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
https://www.amazon.com/Gallon-Aquarium-Divider-Suction-Cups/dp/B079NSQC9S
Suction cups always suck imo, but as dividers go, I cant say I hate this one.
That said, you can put together a square of PVC. Go to a Michaels or hobby lobby and buy like 5 sheets of this mesh. (#5 mesh is better for breeder net, #7 will kinda work as a divider)
https://www.michaels.com/plastic-canvas--7-mesh--clear--18-x-12-inches/D059202S.html?cm_mmc=PLASearch-_-google-_-MICH_Shopping_US_N_ArtSupplies_N_N_N_N_GOS-_-Art+Supplies&amp;gclid=CjwKCAjw5fzrBRASEiwAD2OSVwgwvup5vsT2VrJnZx6YnM7VDOzLIZWSLJMJwLoNirSfQMmBNTFqSRoC6KgQAvD_BwE
And if you have them, tiny zip ties, or just grab some acrylic yarn and a plastic yarn needle that can still pass through the holes, and sew together a box from it with a bottom. And then sew it around the pvc. It's all of 8 seams and you just have to seal it enough to prevent fry from escaping. You could make a breeder net up in maybe an hour. If you had to buy pvc it wouldn't be worth it. But if you had a stick laying around and maybe just needed the 4 elbows, it'd be a fun little project.
Here's an example. He doesnt use a pvc ring to tie it to.
https://youtu.be/J5sfn7EIW9g
Sure! Here's a better shot of it.
The legs are made out of PVC pipe with some elbows. Then I wrapped it with some plastic mesh I found on amazon. The top is this [egg crate] (https://www.amazon.com/gp/product/B078Q2N1BC/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&amp;psc=1) that I got on Amazon as well. The back is supported with suction cups and zip ties. The top has reptile carpet that I bought from Petsmart and zip tied it to the egg crate. Then I put a fake plant suction cupped to the side of the tank as my final touch.
It's worked well for me so far, my Sideneck spends basically all afternoon up there most days.
They came on the tank. I got the tank from Kmart (Australia) for $25. It's a 5 gal and came with a filter that you can change the output from really strong to literally nothing.
Edit: I found this listing on Amazon.
https://www.amazon.com/gp/aw/d/B017SO9DJY/ref=pd_aw_lpo_199_lp_img_3?ie=UTF8&amp;psc=1&amp;refRID=F0P9M7KZ692VWKR9TDWK
They have other ones as well, but these were the cheapest :)
>https://www.youtube.com/watch?v=M6D0metbbcU
Got the idea from here and tracked down the seller here. While not Prime, arrived in 4 days. The reviews were spot on about it. Excellent quality. They also have 24" stalks. Used fish tank "egg crates to hold it at the top.
https://smile.amazon.com/gp/product/B005CM7HAW/ref=ppx_yo_dt_b_asin_title_o01_s00
https://smile.amazon.com/gp/product/B078Q3Z966/ref=ppx_yo_dt_b_asin_title_o02_s00
&#x200B;
https://imgur.com/6Mkr7ng
Ok! I was thinking about getting this http://www.amazon.com/Aquarium-Divider-System-10-Gallon-Tanks/dp/B0002APS2S?ie=UTF8&amp;psc=1&amp;redirect=true&amp;ref_=ox_sc_sfl_title_1&amp;smid=ATVPDKIKX0DER would this work better?
You can buy a tank divider or make your own divider or box with plastic canvas and suction cups. Prefab dividers will be tough to find for your size tank but you could attach them together. It would be expensive.
I've used plastic canvas to make isolation boxes. I just sewed edges together with fishing line. If you want a full tank dividers you'll need to do the same as individual sheets won't be big enough for a 300g. It's a cheap and effective solution. Just choose plastic canvas with larger holes to reduce impact to water flow. You can even cut the smaller holes into larger holes, further reducing the effect.
No, it's just holes like an egg crate or milk crate.
https://www.amazon.com/BraveWind-Divider-Aquarium-Filter-Isolation/dp/B07KQ2HB48/ref=sr_1_5?keywords=egg+crate+light+diffuser&qid=1562868146&s=gateway&sr=8-5
https://www.amazon.com/Ioffersuper-Divider-Louvre-Aquarium-Isolation/dp/B078Q2N1BC/ref=sr_1_1?keywords=egg+crate+light+diffuser&qid=1562868170&s=gateway&sr=8-1
I assume it's normal use is to diffuse light but I've never seen them used in their traditional purpose. I've only seen them used as aquarium lids, dividers, aquascaping, and DIY filtration systems.
People call them egg crates. I found these on amazon. The ones I got had to be modified to snap them together. Here is the link although I would probably look at other ones than these, but it will get you going in the right direction.
https://www.amazon.com/dp/B078Q2N1BC/ref=cm_sw_r_other_apa_i_FLnBCbTWNRVHE
Ioffersuper 4 Pcs Grid Divider Tray Egg Crate Louvre Aquarium Fish Tank Bottom Isolation,Black https://www.amazon.com/dp/B078Q2N1BC/ref=cm_sw_r_cp_api_i_Ii02DbWKYQHDJ
im using a slightly modified one of this, I just replaced the middle part with craft mesh
>I’d actually put the Domino in an acclimation box
https://www.amazon.com/Alfie-Pet-Hang-Isolation-Breeding/dp/B00JVIYWS8/ref=sr_1_3?keywords=acclimation+box&qid=1570492218&sr=8-3
That link is what I have for the Domino without the divider in the middle, How long would you leave the Domino in it before reintroducing?