Reddit mentions: The best cymbal hi-hat stands
We found 5 Reddit comments discussing the best cymbal hi-hat stands. We ran sentiment analysis on each of these comments to determine how redditors feel about different products. We found 5 products and ranked them based on the amount of positive reactions they received. Here are the top 20.
1. Gibraltar Quick Release"Drop" Hi-Hat Clutch
- Cymbal Tilter
- Die-Cast Joint
- SureStrut/Double Braced Legs
- Lifetime Warranty
- Lifetime Warranty
Features:
▼ Read Reddit mentions2. Yamaha HS-650A Hi-Hat Stand - Lightweight, Single Braced, 600 Series
Light weightsingle-bracedcompact designChain linked5-year warranty
Specs:
| Height | 6.8 Inches |
| Length | 25.1 Inches |
| Number of items | 1 |
| Release date | March 2011 |
| Size | 600 Series |
| Weight | 8.8 Pounds |
| Width | 6.1 Inches |
3. Gibraltar SC-QRHHDC Quick Release Hi Hat Drop Clutch
Hand Orientation: AmbidextrousThe Package heigt of the product is 6.1 centimetersThe Package Length of the product is 17.53 centimetersThe Package Width of the product is 10.92 centimeters
Specs:
| Height | 2 Inches |
| Length | 3 Inches |
| Number of items | 1 |
| Size | -inch |
| Weight | 0.432 Pounds |
| Width | 2 Inches |
4. Pearl H900 Direct Drive Hi-hat Stand
Direct Pull driveStandard clutchDouble-braced legs
Specs:
| Height | 5 Inches |
| Length | 25 Inches |
| Number of items | 1 |
| Release date | July 2010 |
| Width | 5 Inches |
5. DW DWCP5520-2 Hi-Hat Stand
- DW’s patented Delta Ball-Bearing Hinge is a state-of-the-art lightweight aluminum design that incorporates ball bearings at both sides.
- The unique Bearing Link Connector, which connects the footboard chain to the pull rod, for reduced friction and increased sensitivity.
- Swivel Legs allow easy positioning of bass drum pedals and other stands around the Hi-Hat Stand.
- Upper Rods come standard in two lengths (21" and 15"), allowing you to customize the Hi-Hat Stand for your specific needs.
- The Turbo (TD3) concentric drive system maintains a direct relationship between the sprocket and the footboard to provide a solid, powerful, consistent feel and response.
Features:
Specs:
| Height | 10 Inches |
| Length | 34 Inches |
| Number of items | 1 |
| Size | -inch |
| Weight | 29 Pounds |
| Width | 15 Inches |
🎓 Reddit experts on cymbal hi-hat stands
The comments and opinions expressed on this page are written exclusively by redditors. To provide you with the most relevant data, we sourced opinions from the most knowledgeable Reddit users based the total number of upvotes and downvotes received across comments on subreddits where cymbal hi-hat stands are discussed. For your reference and for the sake of transparency, here are the specialists whose opinions mattered the most in our ranking.
Interested in what Redditors like? Check out our Shuffle feature
Shuffle: random products popular on RedditTop Reddit comments about Cymbal Hi-Hat Stands:
Summary
1. Gibraltar Quick Release"Drop" Hi-Hat Clutch
- Cymbal Tilter
- Die-Cast Joint
- SureStrut/Double Braced Legs
- Lifetime Warranty
- Lifetime Warranty
Features:
▼ Read Reddit mentions2. Yamaha HS-650A Hi-Hat Stand - Lightweight, Single Braced, 600 Series
Light weightsingle-bracedcompact designChain linked5-year warranty
Specs:
| Height | 6.8 Inches |
| Length | 25.1 Inches |
| Number of items | 1 |
| Release date | March 2011 |
| Size | 600 Series |
| Weight | 8.8 Pounds |
| Width | 6.1 Inches |
3. Gibraltar SC-QRHHDC Quick Release Hi Hat Drop Clutch
Hand Orientation: AmbidextrousThe Package heigt of the product is 6.1 centimetersThe Package Length of the product is 17.53 centimetersThe Package Width of the product is 10.92 centimeters
Specs:
| Height | 2 Inches |
| Length | 3 Inches |
| Number of items | 1 |
| Size | -inch |
| Weight | 0.432 Pounds |
| Width | 2 Inches |
4. Pearl H900 Direct Drive Hi-hat Stand
Direct Pull driveStandard clutchDouble-braced legs
Specs:
| Height | 5 Inches |
| Length | 25 Inches |
| Number of items | 1 |
| Release date | July 2010 |
| Width | 5 Inches |
5. DW DWCP5520-2 Hi-Hat Stand
- DW’s patented Delta Ball-Bearing Hinge is a state-of-the-art lightweight aluminum design that incorporates ball bearings at both sides.
- The unique Bearing Link Connector, which connects the footboard chain to the pull rod, for reduced friction and increased sensitivity.
- Swivel Legs allow easy positioning of bass drum pedals and other stands around the Hi-Hat Stand.
- Upper Rods come standard in two lengths (21" and 15"), allowing you to customize the Hi-Hat Stand for your specific needs.
- The Turbo (TD3) concentric drive system maintains a direct relationship between the sprocket and the footboard to provide a solid, powerful, consistent feel and response.
Features:
Specs:
| Height | 10 Inches |
| Length | 34 Inches |
| Number of items | 1 |
| Size | -inch |
| Weight | 29 Pounds |
| Width | 15 Inches |
>I've been playing for 6 years but I still don't know hardware names lol sorry
You're cool.
I didn't learn what any of that stuff was called untill I started hanging around here a lot. I've been playing for eighteen years and learn new stuff everyday!
There are a ton of different options for what you're looking for. From the basic quick release to boutique clutches with cool features like the Coady Clutch and everything in-between. I'm not a double bass player, so I don't really have a recommendation for you, hopefully someone else will chime in.
I have one almost exactly like this (probably the exact same but an earlier version), and it's perfectly fine. It has served me for years with no problems whatsoever.
https://www.amazon.com/Yamaha-HS-650A-Hi-Hat-Stand-Lightweight/dp/B000RVZXSG#customerReviews
People on this sub love to try to talk people into more expensive or heavier duty gear than they really need. But they don't understand that the inexpensive hardware that's available today is far better than the hardware most of the famous pro drummers were using in the '70s and earlier.
Gibraltar makes a good one that's pretty inexpensive.
https://www.amazon.com/gp/product/B00184W8GG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
This is my favorite hi hat stand, and it can be found for about 100 bucks total.
In my teens and early 20s (I'm almost 40 now) I used a double. Once i got in to more marketable acts doing pop/dance songs, it wasn't needed and removing it allowed me to compact the setup a little bit. I've thought about bringing it back but I'm to accustomed to my hihat/snare placement..... then i saw this:
https://www.amazon.com/Drum-Workshop-Inc-DWCP5520-2-Hi-Hat/dp/B0009R1TUE
Places the slave to the outside of the hihat. The only thing holding me back is that they don't offer it in the 9000, which i use now. I haven't touched a 5000 in so long, i need to stop by a shop and feel one out.