#1,294 in Industrial & Scientific
Use arrows to jump to the previous/next product
Reddit mentions of 3D Printer Nozzles + 4 DIY Tools for J-Head E3D V5 V6 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm Nozzle Tool for Nozzle Replacement, Spanner, Installation Tools …
Sentiment score: 2
Reddit mentions: 5
We found 5 Reddit mentions of 3D Printer Nozzles + 4 DIY Tools for J-Head E3D V5 V6 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm Nozzle Tool for Nozzle Replacement, Spanner, Installation Tools …. Here are the top ones.
or
No more burnt fingers for you! This is a must have tool for changing print nozzles. Having the right tools makes all the difference in the world!Multi-size High-precision extruder nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mmCompliant all M6 thread 3D printer: The nozzles used M6 thread, same as MK8 MK7 UM2 CR10 etc.Special tools: special spanner and multi-function screwdriver can help you adjustment 3D Printer and change extruder nozzle more easy!Note: Screwdriver maybe rust, but No effect on use. Spanner only fit for E3D heat block (20*16mm and 16*16mm)
Specs:
I purchased one of the craptastic nozzle sets off Amazon. They work and are fine for basic testing. I've read reports of them shearing off, particularly with higher-temp materials. The wrench and socket are worth the price in any case.
As you start to do more serious and expensive prints, consider some better quality nozzles. On AliExpress, Triangle Labs has a nicer clone set that's a bit more expensive but looks to be of far higher quality. I've ordered a set, but they've not arrived yet.
I've worked with a variety, and tend to buy an E3D version of whatever sizes I'm going to work extensively with for consistency. My notes on nozzle sizes are here.
https://www.amazon.com/gp/product/B0796C4S5P/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
https://www.amazon.com/Printer-Nozzles-Replacement-Spanner-Installation/dp/B0796C4S5P/ref=sr_1_4?keywords=nozzle+tool&qid=1572426121&sr=8-4
​
it comes with other things, but the red tool alone is worth all the money alone
This might be wider knowledge than I think but I frequent this sub a lot and after owning my MK3 for about 6 months and going through about 4 spools of material (1 of which was wood filament), I began having issues with stringing and a drop in quality, under extrusion, etc..
I saw the post last week about Woodfill being abrasive so I decided to order some nozzles. Sure enough! My nozzle had worn down!
I even went to the discord two weeks ago asking why I'm having to drop my live-z by 0.0## every week. It was because I was grinding the tip of the nozzle or something. That was the reason!
I'm still not totally sure how this happened but it was likely the woodfill. I suspect 3 rolls of PLA didn't do it. I'm betting it was the 1 roll of Wood.
Check your nozzles people! They're super cheap. This is what I got. -- I want to fiddle with a 0.2 for some high detail prints. :)
I usually buy my nozzles on Amazon. I would look for a variety pack so you can try different nozzle sizes.
Here's a link for one I found on Amazon. I don't know how good it is, it's just the first one that popped up.
https://www.amazon.com/dp/B0796C4S5P/