#11 in Sculpture supplies
Use arrows to jump to the previous/next product
Reddit mentions of Art 'N Glow Clear Casting and Coating Epoxy Resin - 16 Ounce Kit
Sentiment score: 3
Reddit mentions: 5
We found 5 Reddit mentions of Art 'N Glow Clear Casting and Coating Epoxy Resin - 16 Ounce Kit. Here are the top ones.
or
- READY, SET, GLOW: Art ‘N Glow’s clear resin epoxy kit is designed to work with our glow in the dark and other craft pigments to ensure the perfect match. Easy one to one mix ratio by volume with forgiving 40 minute work time. Artists and creators from all over the world use our resin epoxy kit to create their works of art. We decided to remove the guesswork and formulate our own epoxy system so you can keep on creating!
- HIGH-QUALITY FORMULA: Trying to find clear epoxy resin that is self-leveling, self degassing, and resistant to turning yellow? Our two part epoxy resists turning yellow due to UV exposure to maximize the longevity of your creation. (We don’t recommend leaving outdoors permanently. Eventually all resin epoxy will turn yellow from extended sun exposure.) Our epoxy resin is also formulated to have superior bubble release characteristics so that your masterpiece comes out beautifully!
- CLEAR AND FREE: Looking for a fun DIY home improvement project or craft? Our food safe epoxy is low odor and VOC free! Use it as a table top epoxy, epoxy for tumblers, or to create beautiful serving trays. Perfect for any kind of resin art your heart desires. Finally, a resin kit that does it all!
- TABLES, MOLDS AND MORE: Art ‘N Glow Casting and Coating Clear Epoxy Resin is perfect for a variety of projects. It is an ideal table top epoxy resin to coat surfaces, craft resin for jewelry making, resin coasters, trays, containers, dice and other decorative art pieces! All amazing and easy to use with or without epoxy resin molds.
- PROUDLY MADE IN AMERICA: We believe in crafting the highest quality products for all your needs. That’s why our epoxy resin kit is made in the USA. Art ‘N Glow was born in Dallas, TX after our founder visited an exhibit on bioluminescence. Our customer service team is also located in the US & can answer any questions or concerns you might have! Happy crafting.
Features:
Specs:
| Color | Water Clear |
| Height | 2.01 Inches |
| Length | 5.98 Inches |
| Number of items | 1 |
| Size | 16 OZ Kit |
| Weight | 1.37 Pounds |
| Width | 4.02 Inches |
Art N Glow, personal fave. Got mine off of Amazon here https://www.amazon.com/dp/B07BM9LHRB/ref=cm_sw_r_sms_apa_i_NbpVDbMX0D84V
here is the resin
here is the silicon
here is the dye
i'm a poor art student so i've gone kinda the cheaper route, other stuff you might need are popsicle sticks, styrofoam cups to make your molds, and glitter and whatsuch if you'd like to go that route. over all i put about $60ish into the stuff i've linked above. good luck dude!
(edit: formatting bc mobile :p)
Hey there, basically you are going to need a clear epoxy resin- it comes in two parts and you mix only what you need right then. Lots of tutorials on the web for that. Here's a link to a popular one on Amazon.
https://www.amazon.com/dp/B07BM9LHRB/ref=cm_sw_r_cp_apa_i_fnomDb01166D6
Sure thing. So first thing I did was go outside and find some Rocks. Probably the hardest part. Had to find one with a flat bottom that I liked. I then make a mold out of it using Silicon Smooth-on stuff.
After I had the mold I built the harness which is just the Flickering LED attached to a CR2032 Holder, a 150 resistor, and a Switch. Ill update the imgur album with pics of the process when im not making50 more of these.
After building the harness I mixed the resin One I used with some dye and poured it in. then I built a little holder to hold the harness just out of the resin and let it dry for 8 hours. Then bam 1 soul stone is made. You should have enough mold to make about 5 molds of different stones pending on size. Let me know if you have any other questions.
I’m glad it’s staying shiny! I buy my resin on amazon: Clear Casting and Coating Epoxy Resin - 16 Ounce Kit https://www.amazon.com/dp/B07BM9LHRB/ref=cm_sw_r_cp_apip_qqqmCoR7iGUkh
It’s an easy 1:1 mixture, the hardest part is keeping hair/animals/fingers away from it while it cures!