Reddit mentions of Cable Matters 2-Pack USB to USB Extension Cable (USB 3.0 Extension Cable) in Black 6 ft for Oculus Rift, HTC Vive, Playstation VR Headset and More

For the 2 sensors on the wall above the computer I'm using 10ft USB 3.0 extension cables. For the 3rd camera I'm using a 16.4ft USB 2.0 extension cable, as well as a 6ft USB 3.0 extension cable because the 2.0 cable wasn't long enough. I have all 3 cameras plugged into the same USB controller on the motherboard. Since I'm using a 2.0 extension cable, the 3rd camera is running via USB 2.0.

I'm using a 10ft HDMI extension cable and a 10ft USB 3.0 cable for the headset. The extension cables are electrical taped together and secured to my desk using velcro straps. I have the headset USB plugged into a PCI-E USB card I bought because I was running out of USB ports.

It's worth noting that for the first couple of days, I was getting occasional errors where the it said the headset was disconnected and I would have to unplug the USB and plug it back in. Since moving the headset to the USB on the PCI-E card (off the same controller as the sensors) I have not had this issue or any other issues to speak of.

6ft 3.0 Extension
https://www.amazon.com/gp/product/B00CFL6ARO/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

16.4ft 2.0 Extension
https://www.amazon.com/gp/product/B00KY9M51O/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

10ft 3.0 Extension
https://www.amazon.com/gp/product/B00C7SA21U/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

USB PCI-E Expansion Card
https://www.amazon.com/gp/product/B00B6ZCNGM/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

10ft HDMI Extension
https://www.amazon.com/gp/product/B004C4SECG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Yes, I have all my cables extended.

Here are the USB cables I use for the sensor camera and HMD USB connections and [here is the HMDI coupler I use] (http://smile.amazon.com/Cable-Matters-Plated-Female-Coupler/dp/B00CJHXY0U?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00) plus a generic HDMI 6 feet cable from Monoprice I ordered some time ago (plus my 970 has a mini to norm HDMI dongle too). There is a USB extender cord packaged with the Rift that I use for the Xbox dongle.
Looks like all the dongles and extra cables work just fine.

I routed all the cables to the front so I can easily plug and unplug everything without crawling under the desk and scooting the PC around...

How big is your planned playspace?

Additional sensors, cables to extend the headset USB/HDMI. Avoid going above 2m extenders as you may have issues and need HDMI repeaters.

PCI Card for people with substandard USB subsystems

These are the good cards which work for most people and are recommended by Oculus

StarTek 2 port card (1 controller) – Cheaper StarTek option that could be used for 2 sensors or a sensor and headset.

https://www.amazon.com/gp/product/B013HT6K3Q

Supported Inatek 4 port card (1 controller) – Don't get the 5 or 7 port card as the design is not really suited for Rift sensors.

https://www.amazon.com/Inateck-Superspeed-Ports-PCI-Expansion/dp/B00B6ZCNGM

Use the Inatek for your two front facing cameras and nothing else. Plug your third or fourth USB 2.0 camera and Rift HMD into your motherboard.

Supported StarTek 4 port card (2 Controllers) – Optional middle tier PCI card solution which can run all four sensors or 3 sensors and HMD. Equivalent to two Inatek cards.

https://www.amazon.com/exec/obidos/ASIN/B00HJZE9VK

Supported StarTek 4 port card (4 Controllers) – Optional top of the range PCI card solution which can run all four sensors or 3 sensors and HMD. Equivalent to four Inatek cards.

https://www.amazon.com/exec/obidos/ASIN/B00HJZEA2S

HDMI and USB Cables

2m HDMI cable that works for most extending the headset

https://www.amazon.com/gp/product/B00JJ519KC/

2m USB 3.0 cable that works for most extending the headset

https://www.amazon.com/gp/product/B00CFL6ARO

More cable options here - https://www.reddit.com//r/oculus/wiki/extension_cables

Edit: You again :) I've responded to 3 of your posts today :) Seems like you made a decision. Some more stuff below you could think about.


Replacement Interfaces, Covers and Foam Inserts

VR Cover is what you need when you have sweaty friends who leave your headset foam soaking wet and gross.

I'd recommend the new facial interface with easily swappable foam pads. Swap out that soaking wet foam in seconds for the next person using the Rift.

• Replacement Interface – https://vrcover.com/product/oculus-rift-facial-interface-foam-replacement-standard-set-2/
  
• Nicer Foam Cover for above – https://vrcover.com/product/oculus-rift-foam-replacement-velour/
  
  Alternatively you can go the cheap option of just a cover for the existing rift interface but it takes a bit longer (~30 seconds) to swap and is nowhere near as comfortable.
  
  
• Cover for stock Rift foam – https://vrcover.com/product/oculus-rift-vr-cover-nosefree/
  
  While the cheap option is great the newer facial interface and velour foam pads are much more comfortable and better than the stock foam.
  
  All of the above are washable as well.
  
  For glasses wearers that do offer the replacement interface in a "deeper" version but it may impact on the FOV (Field of View) of the Rift as your eyes are further from the lenses. I have never tried these.
  
  Video explaining how they work and why they are different
  
  https://www.youtube.com/watch?v=rGeoPKTqKNo
  
  Screen Protectors
  
  These Healingshield 48mm curved watch face protectors work a treat if you want to protect the lenses from scratches. I was skeptical they might impact the visuals but I honestly can't notice them at all. Don't buy any cheap versions of these as they are usually flat and don't sit on the curved lenses of the Rift properly. These ones fit perfectly and have no issues with bubbling.
  
  
• https://www.ebay.com.au/itm/Watch-Face-Clear-Protector-Screen-Protector-Surface-Guard-Film-Healingshield-3x/122015221004?hash=item1c68ac850c:m:mrjCq8F8QOqCjIrvAdvmJ9g
  
• https://www.amazon.com/Healingshield-Watch-Protector-Guard-1-89in/dp/B00SJ22CY8
  
  Mounting Sensors
  
  If you want to mount the sensors in the corner of your room you can unscrew the sensors from their base and attach them to wall mounts.
  
  If you have access to a 3D printer these. I use them for three of mine
  
  
• https://www.thingiverse.com/thing:1772848
  
  or these
  
  
• https://www.buymobius.com/products/vhb-adhesive-camera-mount
  
• https://www.amazon.com/Adhesive-thread-Mobius-Actioncam-Novotm/dp/B00GEGA98M

I used these, 6 ft extension cables from my PC up to the corner:

https://www.amazon.com/gp/product/B00CFL6ARO/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1

absolutely but only very few HDMI and USB are actually working correctly with the Oculus. Let me find the ones that I got off amazon that work. A few months ago there was a thread with all the working USB and HDMI cables that are compatible if the 2 I link are not sufficient.

edit: found it company "cable matters" provides both USB and HDMI not just USB

• https://www.amazon.com/gp/product/B00JJ519KC/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
  
  
• https://www.amazon.com/gp/product/B00CFL6ARO/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
  
  On a side note. lots of people are finding ways to tie down the cable on the desk or down low. Just incase you do yank on it you don't damage your pc by having it fall over while running.
  
  edit 2: If memory serves, not all lengths work from each company, something about supplied power?!?!? But I do know that the 2 I linked are 6 ft and both work with oculus.
  

I can confirm that these 2 cables work together. (16ft.) https://www.amazon.com/gp/product/B017COHTJ6/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B00CFL6ARO/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Here are the links for all the extras I bought to set it up.

• Wall mount
  
  
• Wall Mounts 2-pack
  
  
• TV Mount
  
  
• 10ft HDMI for headset extension
  
  
• HDMI Female Connectors
  
  
• 6ft USB 3.0 cable extensions
  
  
• 10ft USB 3.0 extension (for headset extension.
  
  (the 16 ft extension is the one that came when I ordered my oculus.)
  

I got my headset used for $299 in like new condition. was used once for a demo
https://www.amazon.com/gp/product/B073X8N1YW/ref=oh_aui_detailpage_o08_s00?ie=UTF8&th=1

3rd Sensor plugged into an USB 2.0 port on computer
https://www.amazon.com/gp/product/B0727WDPX6/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

Rechargeable AA batteries and charger
https://www.amazon.com/gp/product/B00JHKSL1O/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

USB Expansion card
https://www.amazon.com/gp/product/B00B6ZCNGM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Headset and touch wall mount
https://www.amazon.com/gp/product/B0781G75B5/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Wall Mount used for rear left sensor
https://www.amazon.com/gp/product/B06XR8DL7T/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

Cable management system
https://www.amazon.com/gp/product/B073P7GJNP/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

Mount clip used for front left sensor on shelf
https://www.amazon.com/gp/product/B01MG4D3O5/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

HDMI extension for headset, only one used.
https://www.amazon.com/gp/product/B00JJ519KC/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

2 pack 6 feet USB 3.0 extension cables, one used for front right sensor and one used for headset
https://www.amazon.com/gp/product/B00CFL6ARO/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

Sensor ceiling mount used for front right sensor
https://www.amazon.com/gp/product/B000IDCDZY/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

3 foot usb 3.0 extension used for front left senor
https://www.amazon.com/gp/product/B00C7S1B4W/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Cleaning Cloths
https://www.amazon.com/gp/product/B00NR9S3EQ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Oculus Rift Facial Interface & Foam Replacement Basic Set
https://vrcover.com/product/oculus-rift-facial-interface-foam-replacement-basic-set/

Photo of final setup
https://ibb.co/exkWXx

I have had no issues at all, this setup working very well for me.

Here is what I used:

https://www.amazon.com/gp/product/B001D49TU4/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B00481GFH4/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B00CFL6ARO/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B000A2AGZC/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

Here are the cables I am using for extending my cameras.

I use one of these:
https://www.amazon.com/gp/product/B01GHL72XS
I couldn't go longer than a 6' HDMI extension without it.



I have used thse extension cables for the headset fine as well:
https://www.amazon.com/gp/product/B00CFL6ARO

I bought this pair of USB SNES-style controllers and this pair of extension cords for it. They're nice enough, but when I realized the Pi3 can do a decent job of running PS1 games, I started using a PS3 controller for it and the SNES ones haven't gotten much use.

I have not run any fighting games with it yet so I can't tell you if those SNES pads are any good for quarter-circle moves and stuff.

Funny, Two days ago I got a 6' USB 3.0 Gold Plated Cable Matters 2 Pack for $9.99.

Would this work or do they need to be active? https://www.amazon.com/Cable-Matters-SuperSpeed-Female-Extension/dp/B00CFL6ARO/ref=sr_1_cc_4?s=aps&ie=UTF8&qid=1481005336&sr=1-4-catcorr&keywords=usb+3.0+extension

It seems on the oculus setup guide I can use a 2.0 extension which I already have so I think I'll be okay. Thank you.

I am using This and This and they work fine.

I bought 2 meter HDMI and usb3(x2) extensions, and have their 3 ends strapped into a neat bundle, this is then secured discretely to the leg of my desk (I use velcro to keep things portable). I then have one of these attached about 60cm from the plug end of the rift's cable that gets clipped onto a drawer handle when the rift is plugged in and in use to protect the rift cables from being yanked out (kids, pets, clumsiness). When not in use, I have the cables coiled under my desk or inside the same old 15" neoprene laptop cover that I keep my rift in. This then either sits on my desk or is kept out of the way on the floor, propped up against the wall/desk (or under my desk).

edit: I have a big, solid, bankers-type desk. YMMV...

http://www.amazon.com/Cable-Matters-SuperSpeed-Female-Extension/dp/B00CFL6ARO/ref=sr_1_1?s=electronics&ie=UTF8&qid=1425587307&sr=1-1&keywords=usb+extension+3.0
I suggest heating cable with a hairdryer a little to form a proper shape.