#19 in Security & surveillance accessories
Use arrows to jump to the previous/next product
Reddit mentions of Crazepony FPV AIO Camera 700TVL CMOS Micro Cam 5.8G 48CH 25mW Transmitter Switchable Raceband 10dBi 2.9-5.5V NTSC/PAL Switchable for FPV Drone like Blade Inductrix etc
Sentiment score: 2
Reddit mentions: 4
We found 4 Reddit mentions of Crazepony FPV AIO Camera 700TVL CMOS Micro Cam 5.8G 48CH 25mW Transmitter Switchable Raceband 10dBi 2.9-5.5V NTSC/PAL Switchable for FPV Drone like Blade Inductrix etc. Here are the top ones.
or
- Patented vortex nozzle system
- Dual nozzle; Easy D.I.Y installation
- No electricity or batteries required
- Exclusive soap dispenser; Self-cleaning nozzle; Adjustable water pressure and water temperature
- 1 Year manufacturer coverage: 12 month coverage for parts and labor
Features:
Specs:
| Height | 0.2 Inches |
| Length | 0.63 Inches |
| Weight | 0.01 Pounds |
| Width | 0.63 Inches |
Special thank you to the crew at Tiny Whoop who consistently provide excellent customer and community support even though, someone at fulfillment may be a little colorblind hehehe. Without you guys and /u/JessePFPV this sub probably wouldn't exist!
 
24K Magic
Frame - Cockroach
Canopy - Tiny Whoop Razor skin 1of1 by Ben@TW!
Flight Controller - FuriousFPV AcroWhoop v2 FrSky
Motors - NewBeeDrone BDR Gold Edition 19,700 KV
Props - Rakon Heli Tri Blade
Power - Power Whoop 2.0 JST-PH
VTx- Crazepony 700TVL AIO Camera Detachable
Support Mods - Clear rubberbands to hide motor wires, 3M VHB tape for VTx mounting, dab of hot glue for Camera mounting
 
Dry weight = 19 grams flat
 
4+ minutes of flight time with Crazepony 230mah LiHV batteries and Crazepony 260mah/short LiHV
 
P.S. My kids thank you for all the candy!
 
Okay, I will do so when I get home.
Crazepony just started selling the Tiny6 canopies on Amazon as a set of two for 8 dollars. I used buy the compete frame kits, I have quite the collection of tiny 6/7 frames hahahahaha.
Depending on your soldering skills, you can split the AIO VTX. I did that after ripping the antenna from a crazy crash and for practice. If you do decide to get another VTX, any split one works great. I like using this one. If you have extra hardware I usually cut a slit into one and use as a grommet for the antenna on the Tiny6/7 frame. u/kungfuremi might have photos.
true i'm running the Gemfan 2035 Props 4 Blades getting ALL-UP 88g with 450mha 2S, D1104 7500KV about to move to the DYS BE1102 10000KV for a bit more thrust ratio, worth checking out.
I wold look over this site for build help, has all was be helpful for finding proper combinations.
https://www.ecalc.ch/xcoptercalc.php?ecalc&lang=en
.
as for measurements the standoff length in the camera pod =~ 17mm to 17.5mm.
They will hold the camera, not relay pinch just holds nicely.
meant to hold something like this.
https://www.amazon.com/Wolfwhoop-600TVL-Transmitter-Antenna-Quadcopter/dp/B06XJMQQ6Y
I wanted to go with an osd so i opted for https://www.amazon.com/gp/product/B072L21RPL
still works well just need a bit of hot glue to keep it form rotating on me.
Photo of setup
Everything else is still stock for now, just added this Micro FPV cam: https://www.amazon.com/dp/B072L21RPL/ref=cm_sw_r_cp_dp_T2_ie6FzbGYDP6W2
I want to upgrade the motors but having trouble finding faster motors for the Syma X11. When I did this to my Hubsan H107 I was able to find motors at Micro Motor Warehouse but I didn't see any for the Syma. Think I might be able to just use any 6mm motors, I would just have to move the gears on to them.