#6,580 in Electronics
Use arrows to jump to the previous/next product
Reddit mentions of CRJ 4-Pin PWM GPU Dual Fan Splitter Adapter Cable All Black Sleeved for Graphics Cards
Sentiment score: 4
Reddit mentions: 9
We found 9 Reddit mentions of CRJ 4-Pin PWM GPU Dual Fan Splitter Adapter Cable All Black Sleeved for Graphics Cards. Here are the top ones.
Buying options
View on Amazon.comor
This 4-Pin Adapter Cable Allows You To Connect Two (2) Standard 3-Pin And 4-Pin Fan Header Devices To Your Graphics CardIdeal For Connecting Pumps And Fans To Your Graphics Card In Combination With AIO GPU CoolersWired To Support PWM Functionality And RPM Monitoring (Only 1 Fan Connector Wired For RPM Monitoring Due To Technical Limitations Of Fan ConnectorslAll Black Appearance Featuring Black Connectors And High Density Black SleevingCable Length (Excluding Connectors): 6"/15cm
Specs:
How are you controlling your fans?
This is what I am using:
CRJ 4-Pin PWM GPU Dual Fan Splitter Adapter
Yes, I'm using the card header, ordered an adapter on amazon, something like that :
The good side is that you can manage the fans and set a curve directly from Afterburner.
The downside is that the graphic card hitself cannot manage the fans without a custom curve because the firmware of the card is adjusting the fan speed with the RPM of the fans and they are much slower that the original ones.
Without a custom curve, the fans are at 100% when the card thinks they are at 47% (approximately).
Yes it should fit, I have one on my 2080 Super. If all 2xxx series cards have the same standoff screws, then you would use the AMD Curacao holes. It looks like the Gigabyte PCB has standard GPU fan connectors, so all you would need is this to control the fans via Afterburner: https://www.amazon.com/CRJ-Splitter-Adapter-Sleeved-Graphics/dp/B07T95C68T/ref=sr_1_3?crid=2YL3CFPW8JIDS&keywords=gpu+fan+adapter&qid=1567998284&s=gateway&sprefix=GPU+fan+%2Caps%2C184&sr=8-3
would this work? https://www.amazon.com/gp/aw/d/B005ZKZEQA/ref=ox_sc_saved_image_5?smid=A3EM7MU9GFCYC4&psc=1
or this one for an easier 2 fan set up
https://www.amazon.com/gp/aw/d/B07T95C68T/ref=ox_sc_act_image_1?smid=AQ8OIL3FGVKZE&psc=1
Based on your post, it sounds like you bought the wrong type of splitter.
You want one for the type of header that GPUs use for their fans. Not the type that motherboards use.
https://www.amazon.com/CRJ-Splitter-Adapter-Sleeved-Graphics/dp/B07T95C68T/
I know, I used an adapter like this to connect the fans, it works without an issue for me. To control my GPU's fan speed on Linux I used this script, maybe that helps you.
Yup. There's single, non-split ones too. This is the one I got:
https://www.amazon.com/CRJ-Splitter-Adapter-Sleeved-Graphics/dp/B07T95C68T/ref=sr_1_1?keywords=gpu+pwm+fan&qid=1568927338&s=gateway&sr=8-1
Kinda looks like this one. Never heard of the brand though.
https://www.amazon.com/CRJ-Splitter-Adapter-Sleeved-Graphics/dp/B07T95C68T/ref=mp_s_a_1_3?keywords=gpu+fan+adapter&qid=1568927401&sprefix=GPU+fa&sr=8-3
I purchased and used this.