Reddit mentions of HYDROSORBENT OSG-40 Silica Gel Dehumidifier Desiccant 40 Gram Orange

General Storage:

Get a big storage box, one of the ones that looks like this. (Not recommending that particular one, just an example of the style I'm talking about.) You'll probably be traveling with this, for furcons and such, so make sure it fits in the trunk of your car and/or meets the requirements for a checked bag on your airline of choice. I also highly recommend getting one with wheels so it doesn't take both hands and brute strength to move it around.

Head Storage:

Get one of these styrofoam heads, and keep your fursuit head on it. I got one for a buck or two from a nearby Ulta. This will keep the inside in shape. If your real-life head is bigger than the styrofoam one, you can bulk it out some with duct tape and scrap cardboard. Wherever you keep your fursuit head, make sure it's not squished at all. If your box is big enough, you can just leave it in there. I keep mine on top of a bookshelf.

Bodysuit Storage:

You want to hang your bodysuit up. If you fold it, the fur can get kinked, and it will never brush out soft and smooth again. I use one of these wetsuit dryers, and I highly recommend them. It's made for holding heavier clothes than a regular coat hanger, the shoulders are rounded such that you won't stretch it the same way a regular coat hanger would, and, most importantly, it has a built-in fan in the top of it, which really helps your suit dry out before it can get funky. Which leads me to suit care...

Drying:

Getting your suit dry after you use it is really really important. Get a cheapo desk fan ( I have one of these ) and put your head on it after you wear it. (Without the styrofoam wig head inserted, of course.) Hang the bodysuit up (ideally using the wetsuit dryer mentioned above) and lay the paws and miscellaneous bits out where they can dry. Never EVER just take the suit off and leave it in a pile, or stuff it in your box. Stuff will grow in it right away, and you will stink to high heaven.

It may be overkill, but I also keep some of these desiccant packs in my box, just to make sure it stays dry.

Sanitizing:

Get a little spray bottle from a drug store and fill it with a 50/50 solution of rubbing alcohol and water. Whenever you take your suit off, spray every surface down with this mixture, especially the inside. This will help keep unpleasant things from growing in it. Don't use undiluted rubbing alcohol, because it will actually evaporate too quick to finish killing everything. Don't use febreeze, perfumes, or other sanitizers. The febreeze and perfumes will just (badly) mask all the nasty smells without killing the source. Other cleaners can leave residue, and most of them you really, really don't want to be breathing in the next time you wear your suit.

Brushing:

You'll want to brush your suit after you wear it, so that the fur doesn't get kinked and you don't look mangy. Get a wire cat brush and run it down the fur with the hooks facing backwards, such that they don't catch. You'll still pull out a little fluff, but it shouldn't be real bad, and you'll end up yanking out a lot more if you let the fur get matted anyway.

Washing:

Washing fursuits is hard, and to be avoided if possible. If your fursuit smells noticeably, you need to wash it, but if you're letting it dry and spraying it with alcohol, you can go a long time before it needs to be washed. Everytime you wash it, you'll inevitably lose a bit of the fluff.

Anything with foam in it is going to be problematic. If parts of your costume are just fur fabric, you can machine-wash them. Washing temperature depends on the fabric your suitbuilder used; consult them, or the store you got the fabric from. Turn the pieces inside-out. To dry, you can machine-dry them on NO HEAT/AIRDRY, or you can hang them up to dry. Never use a dryer with the heat on; it's pretty easy to melt the fur together, ruining the suit. You may be able to get away with the 'low heat' setting, but it's highly dependent on your dryer and the fabric, and I don't suggest risking it.

Pieces that contain foam should be spot-cleaned. (Get a damp washcloth or something and just dab the insides, rinsing the washcloth out repeatedly.) If that's not enough, you can submerge them in your bathtub and do some cleaning there, but don't do so if you don't have to. You run a good chance of messing up your head if you submerge it. Also, it will take a very long time for foam to dry; spray it with the alcohol and use whatever fans you have around to expedite the process. Never machine-dry any foam parts; they'll likely break from the tumbling.

I can't find the pouch on Amazon anymore but this looks just like the one I ordered.

And here are the rechargeable desiccants.

The pouch is only supposed to delay fire damage for a little while but I think it will work better from inside the gun safe. At least that is my hope. The desiccants work pretty well. I have 3 of them in the safe and have to recharge them only about once every 3 months. And I live in a very high humidity area.

Put one of these dessicant packs in each ammo can and you wont have to worry about moisture.

http://www.amazon.com/Hydrosorbent-OSG-40-Dehumidifier-Desiccant-Chloride/dp/B0037Z8K3E/ref=pd_sim_indust_2?ie=UTF8&refRID=1AM48HE8XFJGGCAEHEBX

I have an insurance policy that covers theft (on top of all the normal stuff). As such, I keep my cameras either on a shelf when I'm using them every day, day in and out, or in an airtight, locked Pelican-esque case with some rechargeable indicator dessicant packs (these) if I'm going to be using other gear for an extended period. (Humidity cabinets/strong dehumidifiers are probably not necessarily unless you live in very humid climates, and even then, dessicant dry boxes are really quite capable if you keep track of your indicators.)

Overall, I think insurance is the big thing. If you worry about it, it's worth paying for.

You can get the pellets in aluminum tins with perforations, and little windows (those pellets change color) so you can see how saturated they are.. Using those (large version) might be easier than using the loose stuff. Took several of these to Africa to keep tools in ziploc bags to keep from rusting (humid).

https://www.amazon.com/Hydrosorbent-OSG-40-Dehumidifier-Desiccant-Chloride/dp/B0037Z8K3E/ref=sr_1_10?keywords=dessicant&qid=1573433262&sr=8-10

There's also some newfangled technology that looks promising - solid state dehumidifier, no moving parts.
https://www.youtube.com/watch?v=Vabq-s62IVM

I combine this: http://www.amazon.com/Hydrosorbent-OSG-40-Dehumidifier-Desiccant-Chloride/dp/B0037Z8K3E/ref=sr_1_2?ie=UTF8&qid=1404273951&sr=8-2&keywords=silica+desiccant

with a goldenrod dehumidifier in the safe. I also use the silica tabs in my pelican cases

Here is the mobile version of your link

I've been on the same search but they seem to go in sizes from just a bit too small to 'I can hold five rolls'.

I ended up getting these large bags
And a few of these reusable desiccant blocks

I just bought the First Alert 2096DF-BD from Costco (it is $100 off right now). Note that it appears different than the model offered at Amazon.com which apparently does not bolt to the floor.

I purchased a SentrySafe previously and felt ok, but realized after I bolted it down to the floor that it was no longer water resistant according to the manual. I'm not sure if later models resolved this issue or not.

One other important issue is humidity and you should also get some desiccant to keep papers and things dry.

I use something similar to this in my safe. It seems to work fairly well and the gel balls change color when they absorb moisture so you know when to recharge it (just pop it in the oven for a few hours).

My experience with PLA is it is pretty resistant to moisture absorption (although this might be because my room is very dry?). But target sells some vacuum seal bags that work well. You can also buy reusable desiccant packs on Amazon.

https://www.amazon.com/Hydrosorbent-OSG-40-Dehumidifier-Desiccant-Chloride/dp/B0037Z8K3E/ref=zg_bs_3013604011_19?_encoding=UTF8&psc=1&refRID=W92DDXBK5WW7XMXJ3R63

These are much cheaper and work great. https://www.amazon.com/Hydrosorbent-OSG-40-Dehumidifier-Desiccant-Chloride/dp/B0037Z8K3E/

You have to keep in mind that any silica desiccant will need to be periodically refreshed by heating it to remove the absorbed moisture.

I mean, it’s humid as all heck right now. Could try “rechargeable” desiccants like this: HYDROSORBENT OSG-40 Silica Gel Dehumidifier Desiccant 40 Gram Orange https://www.amazon.com/dp/B0037Z8K3E

I don’t own the above, just an example. They are “recharged” by heating them in a stove. Ones without a metal case can get thrown in the microwave.

Might help....

http://www.amazon.com/Hydrosorbent-OSG-40-Dehumidifier-Desiccant-Chloride/dp/B0037Z8K3E/ref=pd_bxgy_hi_img_y

I have one in each of my Pelican cases which hold my collection. It's a good size, holds an Ultra-pro and five BCW cases.

This is the case I use:

http://www.pelican-case.com/1520.html

Not fire-proof, but portable and everything-else-proof. I'm looking at getting renters insurance in case of fire. Itemize it!

Edit: You bake it in the oven once the pellets stop being orange. Directions printed on the aluminum case.

Very considerate of you, but real desiccant in a Zip-Lok bag will yield much better results than rice.

For example:
http://www.amazon.com/Hydrosorbent-OSG-40-Dehumidifier-Desiccant-Chloride/dp/B0037Z8K3E

EDIT: Dumb gratuitous link removed. Sorry.